leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

warp7: README: Adjust the binary name after DM conversion

Browse Source 
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
so fix the README file accordingly.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
This commit is contained in:
Fabio Estevam 2019-02-09 12:01:59 -02:00 committed by Stefano Babic
parent 0ab327a716
commit 4a2d09ac46
1 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
board/warp7/README
View File

@ -17,7 +17,7 @@ $ make mrproper
$ make warp7_config
$ make
This will generate the U-Boot binary called u-boot.imx.
This will generate the U-Boot binary called u-boot-dtb.imx.
Put warp7 board in USB download mode:
@ -28,11 +28,11 @@ Connect a USB to serial adapter between the host PC and warp7
Connect a USB cable between the OTG warp7 port and the host PC
Copy u-boot.imx to the imx_usb_loader folder.
Copy u-boot-dtb.imx to the imx_usb_loader folder.
Load u-boot.imx via USB:
Load u-boot-dtb.imx via USB:
$ sudo ./imx_usb u-boot.imx
$ sudo ./imx_usb u-boot-dtb.imx
Then U-Boot should start and its messages will appear in the console program.
@ -46,9 +46,9 @@ Use the default environment variables:
Run the DFU command:
=> dfu 0 mmc 0
Transfer u-boot.imx that will be flashed into the eMMC:
Transfer u-boot-dtb.imx that will be flashed into the eMMC:
$ sudo dfu-util -D u-boot.imx -a boot
$ sudo dfu-util -D u-boot-dtb.imx -a boot
Then on the U-Boot prompt the following message should be seen after a
successful upgrade: