leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

IPQ40xx: Add USB nodes

Browse Source 
There are drivers to support built in USB controller and PHY-s now, so lets add the USB nodes to DTSI.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
This commit is contained in:
Robert Marko 2020-09-10 16:00:06 +02:00 committed by Tom Rini
parent 74a703a8ad
commit 430e1dcfa4
1 changed files with 76 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

76
arch/arm/dts/qcom-ipq4019.dtsi
View File

@ -90,5 +90,81 @@
gpio-bank-name="soc";
#gpio-cells = <2>;
};
usb3_ss_phy: ssphy@9a000 {
compatible = "qcom,usb-ss-ipq4019-phy";
#phy-cells = <0>;
reg = <0x9a000 0x800>;
reg-names = "phy_base";
resets = <&reset USB3_UNIPHY_PHY_ARES>;
reset-names = "por_rst";
status = "disabled";
};
usb3_hs_phy: hsphy@a6000 {
compatible = "qcom,usb-hs-ipq4019-phy";
#phy-cells = <0>;
reg = <0xa6000 0x40>;
reg-names = "phy_base";
resets = <&reset USB3_HSPHY_POR_ARES>, <&reset USB3_HSPHY_S_ARES>;
reset-names = "por_rst", "srif_rst";
status = "disabled";
};
usb3: usb3@8af8800 {
compatible = "qcom,dwc3";
reg = <0x8af8800 0x100>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&gcc GCC_USB3_MASTER_CLK>,
<&gcc GCC_USB3_SLEEP_CLK>,
<&gcc GCC_USB3_MOCK_UTMI_CLK>;
clock-names = "master", "sleep", "mock_utmi";
ranges;
status = "disabled";
dwc3@8a00000 {
compatible = "snps,dwc3";
reg = <0x8a00000 0xf8000>;
phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
phy-names = "usb2-phy", "usb3-phy";
dr_mode = "host";
maximum-speed = "super-speed";
snps,dis_u2_susphy_quirk;
};
};
usb2_hs_phy: hsphy@a8000 {
compatible = "qcom,usb-hs-ipq4019-phy";
#phy-cells = <0>;
reg = <0xa8000 0x40>;
reg-names = "phy_base";
resets = <&reset USB2_HSPHY_POR_ARES>, <&reset USB2_HSPHY_S_ARES>;
reset-names = "por_rst", "srif_rst";
status = "disabled";
};
usb2: usb2@60f8800 {
compatible = "qcom,dwc3";
reg = <0x60f8800 0x100>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&gcc GCC_USB2_MASTER_CLK>,
<&gcc GCC_USB2_SLEEP_CLK>,
<&gcc GCC_USB2_MOCK_UTMI_CLK>;
clock-names = "master", "sleep", "mock_utmi";
ranges;
status = "disabled";
dwc3@6000000 {
compatible = "snps,dwc3";
reg = <0x6000000 0xf8000>;
phys = <&usb2_hs_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
maximum-speed = "high-speed";
snps,dis_u2_susphy_quirk;
};
};
};
};