leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'master' of http://git.denx.de/u-boot-sunxi

Browse Source
This commit is contained in:
Tom Rini 2016-04-01 08:17:55 -04:00
commit 40345e9ea7
64 changed files with 1275 additions and 103 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/Kconfig
View File

@ -538,8 +538,8 @@ config ARCH_SUNXI
select OF_BOARD_SETUP
select OF_CONTROL
select OF_SEPARATE
select SPL_STACK_R if !MACH_SUN9I
select SPL_SYS_MALLOC_SIMPLE if !MACH_SUN9I
select SPL_STACK_R if SUPPORT_SPL
select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
select SYS_NS16550
select USB
select USB_STORAGE

1
arch/arm/Makefile
View File

@ -54,6 +54,7 @@ machine-$(CONFIG_ARCH_MVEBU) += mvebu
# TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
machine-$(CONFIG_ORION5X) += orion5x
machine-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx
machine-$(CONFIG_ARCH_SUNXI) += sunxi
machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_STM32) += stm32

38
arch/arm/cpu/armv7/sunxi/Makefile
View File

@ -8,38 +8,10 @@
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += timer.o
obj-y += board.o
obj-y += clock.o
obj-y += cpu_info.o
obj-y += dram_helpers.o
obj-y += pinmux.o
ifndef CONFIG_MACH_SUN9I
obj-y += usb_phy.o
endif
obj-$(CONFIG_MACH_SUN6I) += prcm.o
obj-$(CONFIG_MACH_SUN8I) += prcm.o
obj-$(CONFIG_MACH_SUN9I) += prcm.o
obj-$(CONFIG_MACH_SUN6I) += p2wi.o
obj-$(CONFIG_MACH_SUN8I) += rsb.o
obj-$(CONFIG_MACH_SUN9I) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o
obj-$(CONFIG_MACH_SUN7I) += clock_sun4i.o
ifdef CONFIG_MACH_SUN8I_A83T
obj-y += clock_sun8i_a83t.o
else
obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
endif
obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o
obj-$(CONFIG_MACH_SUN6I) += tzpc.o
obj-$(CONFIG_MACH_SUN8I_H3) += tzpc.o
obj-$(CONFIG_AXP152_POWER) += pmic_bus.o
obj-$(CONFIG_AXP209_POWER) += pmic_bus.o
obj-$(CONFIG_AXP221_POWER) += pmic_bus.o
obj-$(CONFIG_AXP818_POWER) += pmic_bus.o
ifndef CONFIG_SPL_BUILD
ifdef CONFIG_ARMV7_PSCI
obj-$(CONFIG_MACH_SUN6I) += psci_sun6i.o
@ -49,13 +21,5 @@ endif
endif
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o
obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o
obj-y += fel_utils.o
endif

2
arch/arm/dts/Makefile
View File

@ -206,6 +206,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-pc.dtb \
sun8i-h3-orangepi-plus.dtb
dtb-$(CONFIG_MACH_SUN50I) += \
pine64_plus.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb

564
arch/arm/dts/a64.dtsi Normal file
View File

@ -0,0 +1,564 @@
/*
* Copyright (C) 2016 ARM Ltd.
* based on the Allwinner H3 dtsi:
* Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
compatible = "allwinner,a64";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <0>;
enable-method = "psci";
};
cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <1>;
enable-method = "psci";
};
cpu@2 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <2>;
enable-method = "psci";
};
cpu@3 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <3>;
enable-method = "psci";
};
};
psci {
compatible = "arm,psci-0.2", "arm,psci";
method = "smc";
cpu_suspend = <0xc4000001>;
cpu_off = <0x84000002>;
cpu_on = <0xc4000003>;
};
memory {
device_type = "memory";
reg = <0x40000000 0>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
osc32k: osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
pll1: clk@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll1";
};
pll6: clk@01c20028 {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll6", "pll6x2";
};
pll6d2: pll6d2_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
clock-mult = <1>;
clocks = <&pll6 0>;
clock-output-names = "pll6d2";
};
/* dummy clock until pll6 can be reused */
pll8: pll8_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <1>;
clock-output-names = "pll8";
};
cpu: cpu_clk@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-cpu-clk";
reg = <0x01c20050 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
clock-output-names = "cpu";
};
axi: axi_clk@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-axi-clk";
reg = <0x01c20050 0x4>;
clocks = <&cpu>;
clock-output-names = "axi";
};
ahb1: ahb1_clk@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun6i-a31-ahb1-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
clock-output-names = "ahb1";
};
ahb2: ahb2_clk@01c2005c {
#clock-cells = <0>;
compatible = "allwinner,sun8i-h3-ahb2-clk";
reg = <0x01c2005c 0x4>;
clocks = <&ahb1>, <&pll6d2>;
clock-output-names = "ahb2";
};
apb1: apb1_clk@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb1>;
clock-output-names = "apb1";
};
apb2: apb2_clk@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll6 1>, <&pll6 1>;
clock-output-names = "apb2";
};
bus_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,a64-bus-gates-clk",
"allwinner,sun8i-h3-bus-gates-clk";
reg = <0x01c20060 0x14>;
clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
clock-names = "ahb1", "ahb2", "apb1", "apb2";
clock-indices = <1>,
<5>, <6>, <8>,
<9>, <10>, <13>,
<14>, <17>, <18>,
<19>, <20>,
<21>, <23>,
<24>, <25>,
<28>, <29>,
<32>, <35>,
<36>, <37>,
<40>, <43>,
<44>, <52>, <53>,
<54>, <64>,
<65>, <69>, <72>,
<76>, <77>, <78>,
<96>, <97>, <98>,
<101>,
<112>, <113>,
<114>, <115>,
<116>, <135>;
clock-output-names = "bus_mipidsi",
"bus_ce", "bus_dma", "bus_mmc0",
"bus_mmc1", "bus_mmc2", "bus_nand",
"bus_sdram", "bus_gmac", "bus_ts",
"bus_hstimer", "bus_spi0",
"bus_spi1", "bus_otg",
"bus_otg_ehci0", "bus_ehci0",
"bus_otg_ohci0", "bus_ohci0",
"bus_ve", "bus_lcd0",
"bus_lcd1", "bus_deint",
"bus_csi", "bus_hdmi",
"bus_de", "bus_gpu", "bus_msgbox",
"bus_spinlock", "bus_codec",
"bus_spdif", "bus_pio", "bus_ths",
"bus_i2s0", "bus_i2s1", "bus_i2s2",
"bus_i2c0", "bus_i2c1", "bus_i2c2",
"bus_scr",
"bus_uart0", "bus_uart1",
"bus_uart2", "bus_uart3",
"bus_uart4", "bus_dbg";
};
mmc0_clk: clk@01c20088 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20088 0x4>;
clocks = <&osc24M>, <&pll6 0>, <&pll8>;
clock-output-names = "mmc0",
"mmc0_output",
"mmc0_sample";
};
mmc1_clk: clk@01c2008c {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c2008c 0x4>;
clocks = <&osc24M>, <&pll6 0>, <&pll8>;
clock-output-names = "mmc1",
"mmc1_output",
"mmc1_sample";
};
mmc2_clk: clk@01c20090 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20090 0x4>;
clocks = <&osc24M>, <&pll6 0>, <&pll8>;
clock-output-names = "mmc2",
"mmc2_output",
"mmc2_sample";
};
};
regulators {
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&bus_gates 8>,
<&mmc0_clk 0>,
<&mmc0_clk 1>,
<&mmc0_clk 2>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ahb_rst 8>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc1: mmc@01c10000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&bus_gates 9>,
<&mmc1_clk 0>,
<&mmc1_clk 1>,
<&mmc1_clk 2>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ahb_rst 9>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@01c11000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&bus_gates 10>,
<&mmc2_clk 0>,
<&mmc2_clk 1>,
<&mmc2_clk 2>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ahb_rst 10>;
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
pio: pinctrl@01c20800 {
compatible = "allwinner,a64-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bus_gates 69>;
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <2>;
uart0_pins_a: uart0@0 {
allwinner,pins = "PB8", "PB9";
allwinner,function = "uart0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_b: uart0@1 {
allwinner,pins = "PF2", "PF3";
allwinner,function = "uart0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins: uart1@0 {
allwinner,pins = "PG6", "PG7", "PG8", "PG9";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart2_pins: uart2@0 {
allwinner,pins = "PB0", "PB1", "PB2", "PB3";
allwinner,function = "uart2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart3_pins_a: uart3@0 {
allwinner,pins = "PD0", "PD1";
allwinner,function = "uart3";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart3_pins_b: uart3@1 {
allwinner,pins = "PH4", "PH5", "PH6", "PH7";
allwinner,function = "uart3";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart4_pins: uart4@0 {
allwinner,pins = "PD2", "PD3", "PD4", "PD5";
allwinner,function = "uart4";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins: mmc0@0 {
allwinner,pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_default_cd_pin: mmc0_cd_pin@0 {
allwinner,pins = "PF6";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc1_pins: mmc1@0 {
allwinner,pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
allwinner,function = "mmc1";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc2_pins: mmc2@0 {
allwinner,pins = "PC1", "PC5", "PC6", "PC8",
"PC9", "PC10";
allwinner,function = "mmc2";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
ahb_rst: reset@01c202c0 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-ahb1-reset";
reg = <0x01c202c0 0xc>;
};
apb1_rst: reset@01c202d0 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x01c202d0 0x4>;
};
apb2_rst: reset@01c202d8 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x01c202d8 0x4>;
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&bus_gates 112>;
resets = <&apb2_rst 16>;
reset-names = "apb2";
status = "disabled";
};
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&bus_gates 113>;
resets = <&apb2_rst 17>;
reset-names = "apb2";
status = "disabled";
};
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&bus_gates 114>;
resets = <&apb2_rst 18>;
reset-names = "apb2";
status = "disabled";
};
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&bus_gates 115>;
resets = <&apb2_rst 19>;
reset-names = "apb2";
status = "disabled";
};
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&bus_gates 116>;
resets = <&apb2_rst 20>;
reset-names = "apb2";
status = "disabled";
};
rtc: rtc@01f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
};
gic: interrupt-controller@{
compatible = "arm,gic-400";
interrupt-controller;
#interrupt-cells = <3>;
#address-cells = <0>;
reg = <0x01C81000 0x1000>,
<0x01C82000 0x2000>,
<0x01C84000 0x2000>,
<0x01C86000 0x2000>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
};

62
arch/arm/dts/pine64.dts Normal file
View File

@ -0,0 +1,62 @@
/*
* Copyright (c) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/memreserve/ 0x45000000 0x00200000;
/memreserve/ 0x41010000 0x00010800;
/memreserve/ 0x40100000 0x00006000;
#include "pine64_common.dtsi"
/ {
model = "Pine64";
compatible = "pine64,pine64", "allwinner,a64";
chosen {
stdout-path = "serial0:115200n8";
};
memory {
reg = <0x40000000 0x20000000>;
};
};

76
arch/arm/dts/pine64_common.dtsi Normal file
View File

@ -0,0 +1,76 @@
/*
* Copyright (c) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "a64.dtsi"
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>, <&mmc0_default_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
cd-gpios = <&pio 5 6 0>;
cd-inverted;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_a>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
status = "okay";
};

63
arch/arm/dts/pine64_plus.dts Normal file
View File

@ -0,0 +1,63 @@
/*
* Copyright (c) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/memreserve/ 0x45000000 0x00200000;
/memreserve/ 0x41010000 0x00010800;
/memreserve/ 0x40100000 0x00006000;
#include "pine64_common.dtsi"
/ {
model = "Pine64+";
compatible = "pine64,pine64_plus", "allwinner,a64";
chosen {
stdout-path = "serial0:115200n8";
};
/* There is a model with 2GB of DRAM, but U-Boot fixes this for us. */
memory {
reg = <0x40000000 0x40000000>;
};
};

12
arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
View File

@ -57,8 +57,20 @@
};
};
&ehci0 {
status = "okay";
};
&ohci0 {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_b>;
status = "okay";
};
&usb_otg {
status = "okay";
};

12
arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
View File

@ -58,8 +58,20 @@
};
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_b>;
status = "okay";
};
&usb_otg {
status = "okay";
};

34
arch/arm/dts/sun8i-a83t.dtsi
View File

@ -224,5 +224,39 @@
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
usb_otg: usb@01c19000 {
compatible = "allwinner,sun8i-a33-musb";
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
status = "disabled";
};
ehci0: usb@01c1a000 {
compatible = "allwinner,sun8i-a83t-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
ohci0: usb@01c1a400 {
compatible = "allwinner,sun8i-a83t-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
ehci1: usb@01c1b000 {
compatible = "allwinner,sun8i-a83t-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
r_pio: pinctrl@01f02c00 {
compatible = "allwinner,sun8i-a83t-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
};
};
};

3
arch/arm/include/asm/arch-sunxi/clock.h
View File

@ -17,7 +17,8 @@
/* clock control module regs definition */
#if defined(CONFIG_MACH_SUN8I_A83T)
#include <asm/arch/clock_sun8i_a83t.h>
#elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I)
#elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \
defined(CONFIG_MACH_SUN50I)
#include <asm/arch/clock_sun6i.h>
#elif defined(CONFIG_MACH_SUN9I)
#include <asm/arch/clock_sun9i.h>

8
arch/arm/include/asm/arch-sunxi/clock_sun6i.h
View File

@ -350,10 +350,12 @@ struct sunxi_ccm_reg {
#define CCM_HDMI_CTRL_DDC_GATE (0x1 << 30)
#define CCM_HDMI_CTRL_GATE (0x1 << 31)
#ifndef CONFIG_MACH_SUN8I
#define MBUS_CLK_DEFAULT 0x81000001 /* PLL6 / 2 */
#else
#if defined(CONFIG_MACH_SUN50I)
#define MBUS_CLK_DEFAULT 0x81000002 /* PLL6x2 / 3 */
#elif defined(CONFIG_MACH_SUN8I)
#define MBUS_CLK_DEFAULT 0x81000003 /* PLL6 / 4 */
#else
#define MBUS_CLK_DEFAULT 0x81000001 /* PLL6 / 2 */
#endif
#define MBUS_CLK_GATE (0x1 << 31)

6
arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h
View File

@ -224,14 +224,14 @@ struct sunxi_ccm_reg {
#define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
#define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
#define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
#define CCM_USB_CTRL_HSIC_RST (0x1 << 2)
/* There is no global phy clk gate on sun6i, define as 0 */
#define CCM_USB_CTRL_PHYGATE 0
#define CCM_USB_CTRL_PHY0_CLK (0x1 << 8)
#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
#define CCM_USB_CTRL_HSIC_CLK (0x1 << 10)
#define CCM_USB_CTRL_12M_CLK (0x1 << 11)
#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17)
#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0
#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1

1
arch/arm/include/asm/arch-sunxi/gpio.h
View File

@ -159,6 +159,7 @@ enum sunxi_gpio_number {
#define SUN8I_GPB_UART2 2
#define SUN8I_A33_GPB_UART0 3
#define SUN8I_A83T_GPB_UART0 2
#define SUN50I_GPB_UART0 4
#define SUNXI_GPC_NAND 2
#define SUNXI_GPC_SDC2 3

5
arch/arm/include/asm/arch-sunxi/spl.h
View File

@ -12,8 +12,11 @@
#define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */
#define SPL_HEADER_VERSION 1
/* Note: A80 will require special handling here: SPL_ADDR 0x10000 */
#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
#define SPL_ADDR 0x10000
#else
#define SPL_ADDR 0x0
#endif
/* boot head definition from sun4i boot code */
struct boot_file_head {

51
arch/arm/mach-sunxi/Makefile Normal file
View File

@ -0,0 +1,51 @@
#
# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
#
# Based on some other Makefile
# (C) Copyright 2000-2003
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += board.o
obj-y += clock.o
obj-y += cpu_info.o
obj-y += dram_helpers.o
obj-y += pinmux.o
ifndef CONFIG_MACH_SUN9I
obj-y += usb_phy.o
endif
obj-$(CONFIG_MACH_SUN6I) += prcm.o
obj-$(CONFIG_MACH_SUN8I) += prcm.o
obj-$(CONFIG_MACH_SUN9I) += prcm.o
obj-$(CONFIG_MACH_SUN6I) += p2wi.o
obj-$(CONFIG_MACH_SUN8I) += rsb.o
obj-$(CONFIG_MACH_SUN9I) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o
obj-$(CONFIG_MACH_SUN7I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN50I) += clock_sun6i.o
ifdef CONFIG_MACH_SUN8I_A83T
obj-y += clock_sun8i_a83t.o
else
obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
endif
obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o
obj-$(CONFIG_AXP152_POWER) += pmic_bus.o
obj-$(CONFIG_AXP209_POWER) += pmic_bus.o
obj-$(CONFIG_AXP221_POWER) += pmic_bus.o
obj-$(CONFIG_AXP818_POWER) += pmic_bus.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o
obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o
endif

50
arch/arm/cpu/armv7/sunxi/board.c → arch/arm/mach-sunxi/board.c
View File

@ -40,6 +40,30 @@ struct fel_stash {
struct fel_stash fel_stash __attribute__((section(".data")));
#ifdef CONFIG_MACH_SUN50I
#include <asm/armv8/mmu.h>
static struct mm_region sunxi_mem_map[] = {
{
/* SRAM, MMIO regions */
.base = 0x0UL,
.size = 0x40000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE
}, {
/* RAM */
.base = 0x40000000UL,
.size = 0x80000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
/* List terminator */
0,
}
};
struct mm_region *mem_map = sunxi_mem_map;
#endif
static int gpio_init(void)
{
#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
@ -76,6 +100,10 @@ static int gpio_init(void)
sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I)
sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN50I_GPB_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN50I_GPB_UART0);
sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T)
sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);
@ -120,18 +148,30 @@ void s_init(void)
*/
#if defined CONFIG_MACH_SUN6I
setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
#elif defined CONFIG_MACH_SUN8I_A23
uint version;
#elif defined CONFIG_MACH_SUN8I
__maybe_unused uint version;
/* Unlock sram version info reg, read it, relock */
setbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
version = readl(SUNXI_SRAMC_BASE + 0x24);
version = readl(SUNXI_SRAMC_BASE + 0x24) >> 16;
clrbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
if ((version & 0xffff0000) == 0x16500000)
/*
* Ideally this would be a switch case, but we do not know exactly
* which versions there are and which version needs which settings,
* so reproduce the per SoC code from the BSP.
*/
#if defined CONFIG_MACH_SUN8I_A23
if (version == 0x1650)
setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
else /* 0x1661 ? */
setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0);
#elif defined CONFIG_MACH_SUN8I_A33
if (version != 0x1667)
setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0);
#endif
/* A83T BSP never modifies SUNXI_SRAMC_BASE + 0x44 */
/* No H3 BSP, boot0 seems to not modify SUNXI_SRAMC_BASE + 0x44 */
#endif
#if defined CONFIG_MACH_SUN6I || \
@ -253,7 +293,7 @@ void reset_cpu(ulong addr)
#endif
}
#ifndef CONFIG_SYS_DCACHE_OFF
#if !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_ARM64)
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */

0
arch/arm/cpu/armv7/sunxi/clock.c → arch/arm/mach-sunxi/clock.c
View File

0
arch/arm/cpu/armv7/sunxi/clock_sun4i.c → arch/arm/mach-sunxi/clock_sun4i.c
View File

0
arch/arm/cpu/armv7/sunxi/clock_sun6i.c → arch/arm/mach-sunxi/clock_sun6i.c
View File

0
arch/arm/cpu/armv7/sunxi/clock_sun8i_a83t.c → arch/arm/mach-sunxi/clock_sun8i_a83t.c
View File

0
arch/arm/cpu/armv7/sunxi/clock_sun9i.c → arch/arm/mach-sunxi/clock_sun9i.c
View File

28
arch/arm/cpu/armv7/sunxi/cpu_info.c → arch/arm/mach-sunxi/cpu_info.c
View File

@ -38,6 +38,20 @@ int sunxi_get_ss_bonding_id(void)
}
#endif
#ifdef CONFIG_MACH_SUN8I
uint sunxi_get_sram_id(void)
{
uint id;
/* Unlock sram info reg, read it, relock */
setbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
id = readl(SUNXI_SRAMC_BASE + 0x24) >> 16;
clrbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
return id;
}
#endif
#ifdef CONFIG_DISPLAY_CPUINFO
int print_cpuinfo(void)
{
@ -66,15 +80,17 @@ int print_cpuinfo(void)
#elif defined CONFIG_MACH_SUN7I
puts("CPU: Allwinner A20 (SUN7I)\n");
#elif defined CONFIG_MACH_SUN8I_A23
puts("CPU: Allwinner A23 (SUN8I)\n");
printf("CPU: Allwinner A23 (SUN8I %04x)\n", sunxi_get_sram_id());
#elif defined CONFIG_MACH_SUN8I_A33
puts("CPU: Allwinner A33 (SUN8I)\n");
printf("CPU: Allwinner A33 (SUN8I %04x)\n", sunxi_get_sram_id());
#elif defined CONFIG_MACH_SUN8I_A83T
printf("CPU: Allwinner A83T (SUN8I %04x)\n", sunxi_get_sram_id());
#elif defined CONFIG_MACH_SUN8I_H3
puts("CPU: Allwinner H3 (SUN8I)\n");
printf("CPU: Allwinner H3 (SUN8I %04x)\n", sunxi_get_sram_id());
#elif defined CONFIG_MACH_SUN9I
puts("CPU: Allwinner A80 (SUN9I)\n");
#elif defined CONFIG_MACH_SUN8I_A83T
puts("CPU: Allwinner A83T (SUN8I)\n");
#elif defined CONFIG_MACH_SUN50I
puts("CPU: Allwinner A64 (SUN50I)\n");
#else
#warning Please update cpu_info.c with correct CPU information
puts("CPU: SUNXI Family\n");
@ -91,7 +107,7 @@ int sunxi_get_sid(unsigned int *sid)
int i;
for (i = 0; i< 4; i++)
sid[i] = readl(SUNXI_SID_BASE + 4 * i);
sid[i] = readl((ulong)SUNXI_SID_BASE + 4 * i);
return 0;
#else

4
arch/arm/cpu/armv7/sunxi/dram_helpers.c → arch/arm/mach-sunxi/dram_helpers.c
View File

@ -30,8 +30,8 @@ bool mctl_mem_matches(u32 offset)
{
/* Try to write different values to RAM at two addresses */
writel(0, CONFIG_SYS_SDRAM_BASE);
writel(0xaa55aa55, CONFIG_SYS_SDRAM_BASE + offset);
writel(0xaa55aa55, (ulong)CONFIG_SYS_SDRAM_BASE + offset);
/* Check if the same value is actually observed when reading back */
return readl(CONFIG_SYS_SDRAM_BASE) ==
readl(CONFIG_SYS_SDRAM_BASE + offset);
readl((ulong)CONFIG_SYS_SDRAM_BASE + offset);
}

0
arch/arm/cpu/armv7/sunxi/dram_sun4i.c → arch/arm/mach-sunxi/dram_sun4i.c
View File

0
arch/arm/cpu/armv7/sunxi/dram_sun6i.c → arch/arm/mach-sunxi/dram_sun6i.c
View File

0
arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c → arch/arm/mach-sunxi/dram_sun8i_a23.c
View File

0
arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c → arch/arm/mach-sunxi/dram_sun8i_a33.c
View File

0
arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c → arch/arm/mach-sunxi/dram_sun8i_a83t.c
View File

0
arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c → arch/arm/mach-sunxi/dram_sun8i_h3.c
View File

0
arch/arm/cpu/armv7/sunxi/p2wi.c → arch/arm/mach-sunxi/p2wi.c
View File

0
arch/arm/cpu/armv7/sunxi/pinmux.c → arch/arm/mach-sunxi/pinmux.c
View File

0
arch/arm/cpu/armv7/sunxi/pmic_bus.c → arch/arm/mach-sunxi/pmic_bus.c
View File

0
arch/arm/cpu/armv7/sunxi/prcm.c → arch/arm/mach-sunxi/prcm.c
View File

0
arch/arm/cpu/armv7/sunxi/rsb.c → arch/arm/mach-sunxi/rsb.c
View File

48
arch/arm/cpu/armv7/sunxi/usb_phy.c → arch/arm/mach-sunxi/usb_phy.c
View File

@ -34,6 +34,16 @@
#define REG_PHY_UNK_H3 0x420
#define REG_PMU_UNK_H3 0x810
/* A83T specific control bits for PHY0 */
#define SUNXI_PHY_CTL_VBUSVLDEXT BIT(5)
#define SUNXI_PHY_CTL_SIDDQ BIT(3)
/* A83T HSIC specific bits */
#define SUNXI_EHCI_HS_FORCE BIT(20)
#define SUNXI_EHCI_CONNECT_DET BIT(17)
#define SUNXI_EHCI_CONNECT_INT BIT(16)
#define SUNXI_EHCI_HSIC BIT(1)
static struct sunxi_usb_phy {
int usb_rst_mask;
int gpio_vbus;
@ -42,7 +52,7 @@ static struct sunxi_usb_phy {
int id;
int init_count;
int power_on_count;
int base;
ulong base;
} sunxi_usb_phy[] = {
{
.usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
@ -56,7 +66,12 @@ static struct sunxi_usb_phy {
},
#if CONFIG_SUNXI_USB_PHYS >= 3
{
#ifdef CONFIG_MACH_SUN8I_A83T
.usb_rst_mask = CCM_USB_CTRL_HSIC_RST | CCM_USB_CTRL_HSIC_CLK |
CCM_USB_CTRL_12M_CLK,
#else
.usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
#endif
.id = 2,
.base = SUNXI_USB2_BASE,
},
@ -97,7 +112,7 @@ static int get_id_detect_gpio(int index)
return -EINVAL;
}
static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
__maybe_unused static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
int data, int len)
{
int j = 0, usbc_bit = 0;
@ -137,6 +152,10 @@ static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
clrbits_le32(phy->base + REG_PMU_UNK_H3, 0x02);
}
#elif defined CONFIG_MACH_SUN8I_A83T
static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
{
}
#else
static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
{
@ -174,6 +193,13 @@ static void sunxi_usb_phy_passby(struct sunxi_usb_phy *phy, int enable)
SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
SUNXI_EHCI_ULPI_BYPASS_EN;
#ifdef CONFIG_MACH_SUN8I_A83T
if (phy->id == 2)
bits |= SUNXI_EHCI_HS_FORCE |
SUNXI_EHCI_CONNECT_INT |
SUNXI_EHCI_HSIC;
#endif
if (enable)
setbits_le32(addr, bits);
else
@ -184,9 +210,11 @@ static void sunxi_usb_phy_passby(struct sunxi_usb_phy *phy, int enable)
void sunxi_usb_phy_enable_squelch_detect(int index, int enable)
{
#ifndef CONFIG_MACH_SUN8I_A83T
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2);
#endif
}
void sunxi_usb_phy_init(int index)
@ -204,6 +232,15 @@ void sunxi_usb_phy_init(int index)
if (phy->id != 0)
sunxi_usb_phy_passby(phy, SUNXI_USB_PASSBY_EN);
#ifdef CONFIG_MACH_SUN8I_A83T
if (phy->id == 0) {
setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
SUNXI_PHY_CTL_VBUSVLDEXT);
clrbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
SUNXI_PHY_CTL_SIDDQ);
}
#endif
}
void sunxi_usb_phy_exit(int index)
@ -218,6 +255,13 @@ void sunxi_usb_phy_exit(int index)
if (phy->id != 0)
sunxi_usb_phy_passby(phy, !SUNXI_USB_PASSBY_EN);
#ifdef CONFIG_MACH_SUN8I_A83T
if (phy->id == 0) {
setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
SUNXI_PHY_CTL_SIDDQ);
}
#endif
clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
}

9
board/sunxi/Kconfig
View File

@ -77,6 +77,11 @@ config MACH_SUN8I_H3
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
config MACH_SUN50I
bool "sun50i (Allwinner A64)"
select ARM64
select SUNXI_GEN_SUN6I
config MACH_SUN8I_A83T
bool "sun8i (Allwinner A83T)"
select CPU_V7
@ -213,6 +218,7 @@ config DRAM_ODT_CORRECTION
endif
config SYS_CLK_FREQ
default 816000000 if MACH_SUN50I
default 912000000 if MACH_SUN7I
default 1008000000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
@ -223,6 +229,7 @@ config SYS_CONFIG_NAME
default "sun7i" if MACH_SUN7I
default "sun8i" if MACH_SUN8I
default "sun9i" if MACH_SUN9I
default "sun50i" if MACH_SUN50I
config SYS_BOARD
default "sunxi"
@ -604,7 +611,7 @@ config GMAC_TX_DELAY
Set the GMAC Transmit Clock Delay Chain value.
config SPL_STACK_R_ADDR
default 0x4fe00000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN7I || MACH_SUN8I
default 0x4fe00000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN7I || MACH_SUN8I || MACH_SUN50I
default 0x2fe00000 if MACH_SUN9I
endif

2
board/sunxi/MAINTAINERS
View File

@ -63,6 +63,8 @@ F: configs/q8_a33_tablet_800x480_defconfig
F: configs/q8_a33_tablet_1024x600_defconfig
F: include/configs/sun9i.h
F: configs/Merrii_A80_Optimus_defconfig
F: include/configs/sun50i.h
F: configs/pine64_plus_defconfig
A20-OLIMEX-SOM-EVB BOARD
M: Marcus Cooper <codekipper@gmail.com>

50
board/sunxi/board.c
View File

@ -21,6 +21,9 @@
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/usb_phy.h>
#ifndef CONFIG_ARM64
#include <asm/armv7.h>
#endif
#include <asm/gpio.h>
#include <asm/io.h>
#include <nand.h>
@ -73,18 +76,38 @@ DECLARE_GLOBAL_DATA_PTR;
/* add board specific code here */
int board_init(void)
{
int id_pfr1, ret;
__maybe_unused int id_pfr1, ret;
gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
#ifndef CONFIG_ARM64
asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1));
debug("id_pfr1: 0x%08x\n", id_pfr1);
/* Generic Timer Extension available? */
if ((id_pfr1 >> 16) & 0xf) {
if ((id_pfr1 >> CPUID_ARM_GENTIMER_SHIFT) & 0xf) {
uint32_t freq;
debug("Setting CNTFRQ\n");
/* CNTFRQ == 24 MHz */
asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000));
/*
* CNTFRQ is a secure register, so we will crash if we try to
* write this from the non-secure world (read is OK, though).
* In case some bootcode has already set the correct value,
* we avoid the risk of writing to it.
*/
asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r"(freq));
if (freq != CONFIG_TIMER_CLK_FREQ) {
debug("arch timer frequency is %d Hz, should be %d, fixing ...\n",
freq, CONFIG_TIMER_CLK_FREQ);
#ifdef CONFIG_NON_SECURE
printf("arch timer frequency is wrong, but cannot adjust it\n");
#else
asm volatile("mcr p15, 0, %0, c14, c0, 0"
: : "r"(CONFIG_TIMER_CLK_FREQ));
#endif
}
}
#endif /* !CONFIG_ARM64 */
ret = axp_gpio_init();
if (ret)
@ -110,6 +133,15 @@ int dram_init(void)
return 0;
}
#ifdef CONFIG_MACH_SUN50I
void dram_init_banksize(void)
{
/* We need to reserve the first 16MB of RAM for ATF */
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE + (16 * 1024 * 1024);
gd->bd->bi_dram[0].size = get_effective_memsize() - (16 * 1024 * 1024);
}
#endif
#if defined(CONFIG_NAND_SUNXI) && defined(CONFIG_SPL_BUILD)
static void nand_pinmux_setup(void)
{
@ -264,7 +296,7 @@ static void mmc_pinmux_setup(int sdc)
sunxi_gpio_set_pull(SUNXI_GPC(24), SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(SUNXI_GPC(24), 2);
}
#elif defined(CONFIG_MACH_SUN8I)
#elif defined(CONFIG_MACH_SUN8I) || defined(CONFIG_MACH_SUN50I)
/* SDC2: PC5-PC6, PC8-PC16 */
for (pin = SUNXI_GPC(5); pin <= SUNXI_GPC(6); pin++) {
sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
@ -486,6 +518,12 @@ void sunxi_board_init(void)
power_failed |= axp_set_eldo(2, CONFIG_AXP_ELDO2_VOLT);
power_failed |= axp_set_eldo(3, CONFIG_AXP_ELDO3_VOLT);
#endif
#ifdef CONFIG_AXP818_POWER
power_failed |= axp_set_fldo(1, CONFIG_AXP_FLDO1_VOLT);
power_failed |= axp_set_fldo(2, CONFIG_AXP_FLDO2_VOLT);
power_failed |= axp_set_fldo(3, CONFIG_AXP_FLDO3_VOLT);
#endif
#endif
printf("DRAM:");
ramsize = sunxi_dram_init();
@ -541,7 +579,7 @@ void get_board_serial(struct tag_serialnr *serialnr)
*/
static void parse_spl_header(const uint32_t spl_addr)
{
struct boot_file_head *spl = (void *)spl_addr;
struct boot_file_head *spl = (void *)(ulong)spl_addr;
if (memcmp(spl->spl_signature, SPL_SIGNATURE, 3) == 0) {
uint8_t spl_header_version = spl->spl_signature[3];
if (spl_header_version == SPL_HEADER_VERSION) {

2
configs/A10-OLinuXino-Lime_defconfig
View File

@ -13,4 +13,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y

3
configs/A20-OLinuXino-Lime2_defconfig
View File

@ -13,5 +13,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_RTL8211X_PHY_FORCE_MASTER=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y

2
configs/A20-OLinuXino-Lime_defconfig
View File

@ -12,4 +12,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y

1
configs/A20-Olimex-SOM-EVB_defconfig
View File

@ -16,5 +16,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_RTL8211X_PHY_FORCE_MASTER=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y

10
configs/Cubietruck_plus_defconfig
View File

@ -6,13 +6,21 @@ CONFIG_DRAM_ZQ=15355
CONFIG_DRAM_ODT_EN=y
CONFIG_MMC0_CD_PIN="PF6"
CONFIG_I2C0_ENABLE=y
CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
CONFIG_USB0_ID_DET="PH11"
CONFIG_USB1_VBUS_PIN="PD29"
CONFIG_USB2_VBUS_PIN="PL6"
CONFIG_AXP_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPD(20)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO3_VOLT=2500
CONFIG_AXP_DLDO4_VOLT=3300
CONFIG_AXP_FLDO1_VOLT=1200
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y

8
configs/h8_homlet_v2_defconfig
View File

@ -4,6 +4,9 @@ CONFIG_MACH_SUN8I_A83T=y
CONFIG_DRAM_CLK=480
CONFIG_DRAM_ZQ=15355
CONFIG_DRAM_ODT_EN=y
CONFIG_MMC0_CD_PIN="PF6"
CONFIG_USB0_VBUS_PIN="PL5"
CONFIG_USB1_VBUS_PIN="PL6"
CONFIG_AXP_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-allwinner-h8homlet-v2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
@ -11,5 +14,6 @@ CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_AXP_DCDC1_VOLT=3000
CONFIG_AXP_DCDC5_VOLT=1500
CONFIG_AXP_DLDO4_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y

12
configs/pine64_plus_defconfig Normal file
View File

@ -0,0 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN50I=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881915
# CONFIG_VIDEO is not set
CONFIG_DEFAULT_DEVICE_TREE="pine64_plus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y

25
drivers/gpio/axp_gpio.c
View File

@ -59,10 +59,11 @@ static int axp_gpio_direction_output(struct udevice *dev, unsigned pin,
u8 reg;
switch (pin) {
#ifdef CONFIG_AXP221_POWER /* Only available on axp221/axp223 */
#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
/* Only available on later PMICs */
case SUNXI_GPIO_AXP0_VBUS_ENABLE:
ret = pmic_bus_clrbits(AXP221_MISC_CTRL,
AXP221_MISC_CTRL_N_VBUSEN_FUNC);
ret = pmic_bus_clrbits(AXP_MISC_CTRL,
AXP_MISC_CTRL_N_VBUSEN_FUNC);
if (ret)
return ret;
@ -90,10 +91,11 @@ static int axp_gpio_get_value(struct udevice *dev, unsigned pin)
mask = AXP_POWER_STATUS_VBUS_PRESENT;
break;
#endif
#ifdef CONFIG_AXP221_POWER /* Only available on axp221/axp223 */
#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
/* Only available on later PMICs */
case SUNXI_GPIO_AXP0_VBUS_ENABLE:
ret = pmic_bus_read(AXP221_VBUS_IPSOUT, &val);
mask = AXP221_VBUS_IPSOUT_DRIVEBUS;
ret = pmic_bus_read(AXP_VBUS_IPSOUT, &val);
mask = AXP_VBUS_IPSOUT_DRIVEBUS;
break;
#endif
default:
@ -115,14 +117,15 @@ static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val)
u8 reg;
switch (pin) {
#ifdef CONFIG_AXP221_POWER /* Only available on axp221/axp223 */
#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
/* Only available on later PMICs */
case SUNXI_GPIO_AXP0_VBUS_ENABLE:
if (val)
return pmic_bus_setbits(AXP221_VBUS_IPSOUT,
AXP221_VBUS_IPSOUT_DRIVEBUS);
return pmic_bus_setbits(AXP_VBUS_IPSOUT,
AXP_VBUS_IPSOUT_DRIVEBUS);
else
return pmic_bus_clrbits(AXP221_VBUS_IPSOUT,
AXP221_VBUS_IPSOUT_DRIVEBUS);
return pmic_bus_clrbits(AXP_VBUS_IPSOUT,
AXP_VBUS_IPSOUT_DRIVEBUS);
#endif
default:
reg = axp_get_gpio_ctrl_reg(pin);

6
drivers/mmc/sunxi_mmc.c
View File

@ -339,7 +339,7 @@ static int sunxi_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC;
if (data) {
if ((u32) data->dest & 0x3) {
if ((u32)(long)data->dest & 0x3) {
error = -1;
goto out;
}
@ -480,6 +480,10 @@ struct mmc *sunxi_mmc_init(int sdc_no)
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
cfg->host_caps = MMC_MODE_4BIT;
#ifdef CONFIG_MACH_SUN50I
if (sdc_no == 2)
cfg->host_caps = MMC_MODE_8BIT;
#endif
cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;

21
drivers/net/Kconfig
View File

@ -13,6 +13,27 @@ config PHYLIB
help
Enable Ethernet PHY (physical media interface) support.
config RTL8211X_PHY_FORCE_MASTER
bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
depends on PHYLIB
help
Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F).
This can work around link stability and data corruption issues on gigabit
links which can occur in slave mode on certain PHYs, e.g. on the
RTL8211C(L).
Please note that two directly connected devices (i.e. via crossover cable)
will not be able to establish a link between each other if they both force
master mode. Multiple devices forcing master mode when connected by a
network switch do not pose a problem as the switch configures its affected
ports into slave mode.
This option only affects gigabit links. If you must establish a direct
connection between two devices which both force master mode, try forcing
the link speed to 100MBit/s.
If unsure, say N.
menuconfig NETDEVICES
bool "Network device support"
depends on NET

13
drivers/net/phy/realtek.c
View File

@ -12,6 +12,10 @@
#define PHY_AUTONEGOTIATE_TIMEOUT 5000
/* RTL8211x 1000BASE-T Control Register */
#define MIIM_RTL8211x_CTRL1000T_MSCE (1 << 12);
#define MIIM_RTL8211X_CTRL1000T_MASTER (1 << 11);
/* RTL8211x PHY Status Register */
#define MIIM_RTL8211x_PHY_STATUS 0x11
#define MIIM_RTL8211x_PHYSTAT_SPEED 0xc000
@ -53,7 +57,14 @@ static int rtl8211x_config(struct phy_device *phydev)
*/
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER,
MIIM_RTL8211x_PHY_INTR_DIS);
#ifdef CONFIG_RTL8211X_PHY_FORCE_MASTER
unsigned int reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000);
/* force manual master/slave configuration */
reg |= MIIM_RTL8211x_CTRL1000T_MSCE;
/* force master mode */
reg |= MIIM_RTL8211X_CTRL1000T_MASTER;
phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, reg);
#endif
/* read interrupt status just to clear it */
phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER);

32
drivers/power/Kconfig
View File

@ -10,7 +10,7 @@ choice
default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
default AXP818_POWER if MACH_SUN8I_A83T
default SUNXI_NO_PMIC if MACH_SUN8I_H3
default SUNXI_NO_PMIC if MACH_SUN8I_H3 || MACH_SUN50I
config SUNXI_NO_PMIC
boolean "board without a pmic"
@ -118,13 +118,12 @@ config AXP_DCDC4_VOLT
config AXP_DCDC5_VOLT
int "axp pmic dcdc5 voltage"
depends on AXP221_POWER || AXP818_POWER
default 1800 if AXP818_POWER
default 1500 if MACH_SUN6I || MACH_SUN8I
---help---
Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
disable dcdc5.
On A23 / A31 / A33 / A83T boards dcdc5 is VCC-DRAM and should be 1.5V,
1.8V for A83T.
1.35V if DDR3L is used.
config AXP_ALDO1_VOLT
int "axp pmic (a)ldo1 voltage"
@ -239,6 +238,33 @@ config AXP_ELDO3_VOLT
1.2V for the SSD2828 chip (converter of parallel LCD interface
into MIPI DSI).
config AXP_FLDO1_VOLT
int "axp pmic fldo1 voltage"
depends on AXP818_POWER
default 0 if MACH_SUN8I_A83T
---help---
Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to
disable fldo1.
On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is
used.
config AXP_FLDO2_VOLT
int "axp pmic eldo2 voltage"
depends on AXP818_POWER
default 900 if MACH_SUN8I_A83T
---help---
Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to
disable fldo2.
On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V.
config AXP_FLDO3_VOLT
int "axp pmic fldo3 voltage"
depends on AXP818_POWER
default 0
---help---
Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to
disable fldo3.
config SY8106A_VOUT1_VOLT
int "SY8106A pmic VOUT1 voltage"
depends on SY8106A_POWER

34
drivers/power/axp818.c
View File

@ -191,6 +191,40 @@ int axp_set_eldo(int eldo_num, unsigned int mvolt)
AXP818_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1));
}
int axp_set_fldo(int fldo_num, unsigned int mvolt)
{
int ret;
u8 cfg;
if (fldo_num < 1 || fldo_num > 3)
return -EINVAL;
if (mvolt == 0)
return pmic_bus_clrbits(AXP818_OUTPUT_CTRL3,
AXP818_OUTPUT_CTRL3_FLDO1_EN << (fldo_num - 1));
if (fldo_num < 3) {
cfg = axp818_mvolt_to_cfg(mvolt, 700, 1450, 50);
ret = pmic_bus_write(AXP818_FLDO1_CTRL + (fldo_num - 1), cfg);
} else {
/*
* Special case for FLDO3, which is DCDC5 / 2 or FLDOIN / 2
* Since FLDOIN is unknown, test against DCDC5.
*/
if (mvolt * 2 == CONFIG_AXP_DCDC5_VOLT)
ret = pmic_bus_clrbits(AXP818_FLDO2_3_CTRL,
AXP818_FLDO2_3_CTRL_FLDO3_VOL);
else
ret = pmic_bus_setbits(AXP818_FLDO2_3_CTRL,
AXP818_FLDO2_3_CTRL_FLDO3_VOL);
}
if (ret)
return ret;
return pmic_bus_setbits(AXP818_OUTPUT_CTRL3,
AXP818_OUTPUT_CTRL3_FLDO1_EN << (fldo_num - 1));
}
int axp_init(void)
{
u8 axp_chip_id;

1
drivers/usb/host/ehci-sunxi.c
View File

@ -91,6 +91,7 @@ static const struct udevice_id ehci_usb_ids[] = {
{ .compatible = "allwinner,sun6i-a31-ehci", },
{ .compatible = "allwinner,sun7i-a20-ehci", },
{ .compatible = "allwinner,sun8i-a23-ehci", },
{ .compatible = "allwinner,sun8i-a83t-ehci", },
{ .compatible = "allwinner,sun8i-h3-ehci", },
{ .compatible = "allwinner,sun9i-a80-ehci", },
{ }

1
drivers/usb/host/ohci-sunxi.c
View File

@ -94,6 +94,7 @@ static const struct udevice_id ohci_usb_ids[] = {
{ .compatible = "allwinner,sun6i-a31-ohci", },
{ .compatible = "allwinner,sun7i-a20-ohci", },
{ .compatible = "allwinner,sun8i-a23-ohci", },
{ .compatible = "allwinner,sun8i-a83t-ohci", },
{ .compatible = "allwinner,sun8i-h3-ohci", },
{ .compatible = "allwinner,sun9i-a80-ohci", },
{ }

2
drivers/usb/musb-new/musb_regs.h
View File

@ -434,7 +434,7 @@ static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
static inline u8 musb_read_configdata(void __iomem *mbase)
{
#ifdef CONFIG_MACH_SUN8I_A33
#if defined CONFIG_MACH_SUN8I_A33 || defined CONFIG_MACH_SUN8I_A83T
/* <Sigh> allwinner saves a reg, and we need to hardcode this */
return 0xde;
#else

8
include/axp221.h
View File

@ -43,12 +43,8 @@
#define AXP221_ALDO1_CTRL 0x28
#define AXP221_ALDO2_CTRL 0x29
#define AXP221_ALDO3_CTRL 0x2a
#define AXP221_VBUS_IPSOUT 0x30
#define AXP221_VBUS_IPSOUT_DRIVEBUS (1 << 2)
#define AXP221_SHUTDOWN 0x32
#define AXP221_SHUTDOWN_POWEROFF (1 << 7)
#define AXP221_MISC_CTRL 0x8f
#define AXP221_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
#define AXP221_PAGE 0xff
/* Page 1 addresses */
@ -57,6 +53,10 @@
/* For axp_gpio.c */
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
#define AXP_VBUS_IPSOUT 0x30
#define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2)
#define AXP_MISC_CTRL 0x8f
#define AXP_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
#define AXP_GPIO0_CTRL 0x90
#define AXP_GPIO1_CTRL 0x92
#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */

7
include/axp818.h
View File

@ -41,6 +41,7 @@
#define AXP818_ELDO3_CTRL 0x1b
#define AXP818_FLDO1_CTRL 0x1c
#define AXP818_FLDO2_3_CTRL 0x1d
#define AXP818_FLDO2_3_CTRL_FLDO3_VOL (1 << 4)
#define AXP818_DCDC1_CTRL 0x20
#define AXP818_DCDC2_CTRL 0x21
#define AXP818_DCDC3_CTRL 0x22
@ -53,11 +54,13 @@
#define AXP818_ALDO2_CTRL 0x29
#define AXP818_ALDO3_CTRL 0x2a
int axp818_init(void);
/* For axp_gpio.c */
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
#define AXP_VBUS_IPSOUT 0x30
#define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2)
#define AXP_MISC_CTRL 0x8f
#define AXP_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
#define AXP_GPIO0_CTRL 0x90
#define AXP_GPIO1_CTRL 0x92
#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */

1
include/axp_pmic.h
View File

@ -31,6 +31,7 @@ int axp_set_aldo3(unsigned int mvolt);
int axp_set_aldo4(unsigned int mvolt);
int axp_set_dldo(int dldo_num, unsigned int mvolt);
int axp_set_eldo(int eldo_num, unsigned int mvolt);
int axp_set_fldo(int fldo_num, unsigned int mvolt);
int axp_init(void);
int axp_get_sid(unsigned int *sid);

25
include/configs/sun50i.h Normal file
View File

@ -0,0 +1,25 @@
/*
* Configuration settings for the Allwinner A64 (sun50i) CPU
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* A64 specific configuration
*/
#define CONFIG_SUNXI_USB_PHYS 1
#define COUNTER_FREQUENCY CONFIG_TIMER_CLK_FREQ
#define GICD_BASE 0x1c81000
#define GICC_BASE 0x1c82000
/*
* Include common sunxi configuration where most the settings are
*/
#include <configs/sunxi-common.h>
#endif /* __CONFIG_H */

1
include/configs/sun6i.h
View File

@ -25,7 +25,6 @@
#define CONFIG_ARMV7_PSCI 1
#define CONFIG_ARMV7_PSCI_NR_CPUS 4
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
#define CONFIG_TIMER_CLK_FREQ 24000000
/*
* Include common sunxi configuration where most the settings are

1
include/configs/sun7i.h
View File

@ -22,7 +22,6 @@
#define CONFIG_ARMV7_PSCI 1
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
#define CONFIG_TIMER_CLK_FREQ 24000000
/*
* Include common sunxi configuration where most the settings are

4
include/configs/sun8i.h
View File

@ -20,6 +20,8 @@
#ifdef CONFIG_MACH_SUN8I_H3
#define CONFIG_SUNXI_USB_PHYS 4
#elif defined CONFIG_MACH_SUN8I_A83T
#define CONFIG_SUNXI_USB_PHYS 3
#else
#define CONFIG_SUNXI_USB_PHYS 2
#endif
@ -38,8 +40,6 @@
#endif
#endif
#define CONFIG_TIMER_CLK_FREQ 24000000
/*
* Include common sunxi configuration where most the settings are
*/

21
include/configs/sunxi-common.h
View File

@ -56,6 +56,7 @@
/* CPU */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_TIMER_CLK_FREQ 24000000
/*
* The DRAM Base differs between some models. We cannot use macros for the
@ -90,7 +91,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */
#ifdef CONFIG_MACH_SUN9I
#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
/*
* The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
* slightly bigger. Note that it is possible to map the first 32 KiB of the
@ -99,7 +100,7 @@
* the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
*/
#define CONFIG_SYS_INIT_RAM_ADDR 0x10000
#define CONFIG_SYS_INIT_RAM_SIZE 0x0a000 /* 40 KiB */
#define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */
#else
#define CONFIG_SYS_INIT_RAM_ADDR 0x0
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */
@ -188,8 +189,16 @@
#define CONFIG_SPL_BOARD_LOAD_IMAGE
#if defined(CONFIG_MACH_SUN9I)
#define CONFIG_SPL_TEXT_BASE 0x10020 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* ? KiB on sun9i */
#elif defined(CONFIG_MACH_SUN50I)
#define CONFIG_SPL_TEXT_BASE 0x10020 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x7fe0 /* 32 KiB on sun50i */
#else
#define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */
#endif
#define CONFIG_SPL_LIBDISK_SUPPORT
@ -197,14 +206,22 @@
#define CONFIG_SPL_MMC_SUPPORT
#endif
#ifndef CONFIG_ARM64
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
#endif
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */
#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
/* FIXME: 40 KiB instead of 32 KiB ? */
#define LOW_LEVEL_SRAM_STACK 0x00018000
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#else
/* end of 32 KiB in sram */
#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#endif
/* I2C */
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \