leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3

Browse Source 
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
commit 590b0c0cfc6162aeebbf43eaafb9753b56df1532
Author: Pascal Roeleven <dev@pascalroeleven.nl>
Date:   Fri Apr 20 12:21:12 2018 +0200

    ARM: dts: sun4i: Fix incorrect clocks for displays

Note: Update pinctrl-0 for sun4i-a10-inet-3f.dts, sun4i-a10-inet-3w.dts
like other dts file since there dts file are U-Boot specific.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Jagan Teki 2018-08-05 00:40:07 +05:30
parent bbef20d479
commit 3c92cca3cd
27 changed files with 1194 additions and 1440 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
arch/arm/dts/axp209.dtsi
View File

@ -53,12 +53,27 @@
interrupt-controller;
#interrupt-cells = <1>;
ac_power_supply: ac-power-supply {
compatible = "x-powers,axp202-ac-power-supply";
status = "disabled";
};
axp_adc: adc {
compatible = "x-powers,axp209-adc";
#io-channel-cells = <1>;
};
axp_gpio: gpio {
compatible = "x-powers,axp209-gpio";
gpio-controller;
#gpio-cells = <2>;
};
battery_power_supply: battery-power-supply {
compatible = "x-powers,axp209-battery-power-supply";
status = "disabled";
};
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <1500>;
@ -97,7 +112,7 @@
};
};
usb_power_supply: usb_power_supply {
usb_power_supply: usb-power-supply {
compatible = "x-powers,axp202-usb-power-supply";
status = "disabled";
};

61
arch/arm/dts/sun4i-a10-a1000.dts
View File

@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele A1000";
@ -63,8 +62,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_a1000>;
red {
label = "a1000:red:usr";
@ -80,8 +77,6 @@
reg_emac_3v3: emac-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&emac_power_pin_a1000>;
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@ -117,6 +112,10 @@
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
status = "okay";
};
@ -126,8 +125,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@ -137,8 +134,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -153,7 +148,7 @@
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@ -167,12 +162,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -184,20 +176,31 @@
status = "okay";
};
&pio {
emac_power_pin_a1000: emac_power_pin@0 {
allwinner,pins = "PH15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
#include "axp209.dtsi"
led_pins_a1000: led_pins@0 {
allwinner,pins = "PH10", "PH20";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb1_vbus {
@ -210,13 +213,13 @@
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx_pins_a>;
pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

23
arch/arm/dts/sun4i-a10-ba10-tvbox.dts
View File

@ -68,8 +68,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@ -79,8 +77,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -95,7 +91,7 @@
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@ -108,12 +104,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -121,20 +114,10 @@
status = "okay";
};
&ohci1 {
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
usb2_vbus_pin_a: usb2_vbus_pin@0 {
allwinner,pins = "PH12";
};
};
&reg_usb0_vbus {
regulator-boot-on;
status = "okay";
@ -151,7 +134,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

37
arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
View File

@ -65,8 +65,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -80,14 +78,10 @@
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5306de4: touchscreen@38 {
@ -104,21 +98,21 @@
vref-supply = <&reg_vcc3v0>;
status = "okay";
button@800 {
button-800 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <800000>;
};
button@1000 {
button-1000 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <1000000>;
};
button@1200 {
button-1200 {
label = "Back";
linux,code = <KEY_BACK>;
channel = <0>;
@ -127,12 +121,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -141,18 +132,16 @@
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
};
@ -166,7 +155,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

67
arch/arm/dts/sun4i-a10-cubieboard.dts
View File

@ -46,7 +46,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Cubietech Cubieboard";
@ -60,6 +59,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -91,6 +101,10 @@
cpu-supply = <&reg_dcdc2>;
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -100,8 +114,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@ -110,9 +122,17 @@
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -122,14 +142,12 @@
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@ -142,12 +160,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -164,18 +179,16 @@
};
&pio {
led_pins_cubieboard: led_pins@0 {
allwinner,pins = "PH20", "PH21";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
led_pins_cubieboard: led-pins {
pins = "PH20", "PH21";
function = "gpio_out";
drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
};
@ -185,6 +198,10 @@
#include "axp209.dtsi"
&ac_power_supply {
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@ -220,14 +237,14 @@
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>,
<&spi0_cs0_pins_a>;
pinctrl-0 = <&spi0_pi_pins>,
<&spi0_cs0_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

76
arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts
View File

@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
@ -59,8 +58,6 @@
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&bl_en_pin_dsrv9703c>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
@ -78,10 +75,8 @@
max-microvolt = <3000000>;
};
reg_motor: reg_motor {
reg_motor: reg-motor {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&motor_pins>;
regulator-name = "vcc-motor";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
@ -91,8 +86,6 @@
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
@ -106,8 +99,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -119,15 +110,11 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
/* pull-ups and devices require AXP209 LDO3 */
status = "failed";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
@ -135,8 +122,6 @@
reg = <0x38>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_pins>;
reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
touchscreen-size-x = <1024>;
touchscreen-size-y = <768>;
@ -147,14 +132,14 @@
vref-supply = <&reg_ldo2>;
status = "okay";
button@400 {
button-400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <400000>;
};
button@800 {
button-800 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
@ -163,12 +148,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -177,52 +159,22 @@
};
&pio {
bl_en_pin_dsrv9703c: bl_en_pin@0 {
allwinner,pins = "PH7";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
codec_pa_pin: codec_pa_pin@0 {
allwinner,pins = "PH15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
motor_pins: motor_pins@0 {
allwinner,pins = "PB3";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
touchscreen_pins: touchscreen_pins@0 {
allwinner,pins = "PB13";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@ -261,7 +213,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

28
arch/arm/dts/sun4i-a10-gemei-g9.dts
View File

@ -72,8 +72,6 @@
*/
&codec {
/* PH15 controls power to external amplifier (ft2012q) */
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@ -91,8 +89,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -104,8 +100,6 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/* Accelerometer */
@ -122,21 +116,21 @@
status = "okay";
button@158 {
button-158 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <158730>;
};
button@349 {
button-349 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <349206>;
};
button@1142 {
button-1142 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
@ -145,24 +139,12 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
status = "okay";
};
&pio {
codec_pa_pin: codec_pa_pin@0 {
allwinner,pins = "PH15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@ -199,7 +181,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

32
arch/arm/dts/sun4i-a10-hackberry.dts
View File

@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Miniand Hackberry";
@ -81,8 +80,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy0>;
status = "okay";
};
@ -93,7 +90,7 @@
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@ -107,12 +104,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -124,31 +118,11 @@
status = "okay";
};
&pio {
pinctrl-names = "default";
pinctrl-0 = <&hackberry_hogs>;
hackberry_hogs: hogs@0 {
allwinner,pins = "PH19";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
allwinner,pins = "PH12";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&reg_usb1_vbus {
status = "okay";
};
&reg_usb2_vbus {
pinctrl-0 = <&usb2_vbus_pin_hackberry>;
gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@ -161,6 +135,6 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

31
arch/arm/dts/sun4i-a10-hyundai-a7hd.dts
View File

@ -63,8 +63,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -78,12 +76,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -92,18 +87,16 @@
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
};
@ -118,14 +111,10 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&usb2_vbus_pin_a {
allwinner,pins = "PH6";
};
&usb_otg {
dr_mode = "otg";
status = "okay";

2
arch/arm/dts/sun4i-a10-inet-3f.dts
View File

@ -23,6 +23,6 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

2
arch/arm/dts/sun4i-a10-inet-3w.dts
View File

@ -23,6 +23,6 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

58
arch/arm/dts/sun4i-a10-inet1.dts
View File

@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
@ -59,8 +58,6 @@
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&bl_en_pin_inet>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
@ -89,8 +86,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -102,8 +97,6 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/* Accelerometer */
@ -116,8 +109,6 @@
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5x: touchscreen@38 {
@ -125,8 +116,6 @@
reg = <0x38>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_wake_pin>;
wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
touchscreen-size-x = <600>;
touchscreen-size-y = <1024>;
@ -138,21 +127,21 @@
vref-supply = <&reg_ldo2>;
status = "okay";
button@200 {
button-200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
button@1000 {
button-1000 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <1000000>;
};
button@1200 {
button-1200 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
@ -161,12 +150,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -179,38 +165,22 @@
};
&pio {
bl_en_pin_inet: bl_en_pin@0 {
allwinner,pins = "PH7";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
touchscreen_wake_pin: touchscreen_wake_pin@0 {
allwinner,pins = "PB13";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@ -253,7 +223,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

41
arch/arm/dts/sun4i-a10-inet97fv2.dts
View File

@ -72,8 +72,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -85,14 +83,10 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
@ -109,35 +103,35 @@
vref-supply = <&reg_ldo2>;
status = "okay";
button@200 {
button-200 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <200000>;
};
button@600 {
button-600 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <600000>;
};
button@800 {
button-800 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <800000>;
};
button@1000 {
button-1000 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <1000000>;
};
button@1200 {
button-1200 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
@ -146,12 +140,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -160,18 +151,16 @@
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
};
@ -210,7 +199,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

101
arch/arm/dts/sun4i-a10-inet9f-rev03.dts
View File

@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "iNet-9F Rev 03";
@ -60,7 +59,7 @@
stdout-path = "serial0:115200n8";
};
gpio_keys {
gpio-keys {
compatible = "gpio-keys-polled";
pinctrl-names = "default";
pinctrl-0 = <&key_pins_inet9f>;
@ -68,7 +67,7 @@
#size-cells = <0>;
poll-interval = <20>;
button@0 {
left-joystick-left {
label = "Left Joystick Left";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
@ -76,7 +75,7 @@
gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
};
button@1 {
left-joystick-right {
label = "Left Joystick Right";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
@ -84,7 +83,7 @@
gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
};
button@2 {
left-joystick-up {
label = "Left Joystick Up";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
@ -92,7 +91,7 @@
gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
};
button@3 {
left-joystick-down {
label = "Left Joystick Down";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
@ -100,7 +99,7 @@
gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
};
button@4 {
right-joystick-left {
label = "Right Joystick Left";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
@ -108,7 +107,7 @@
gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
};
button@5 {
right-joystick-right {
label = "Right Joystick Right";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
@ -116,7 +115,7 @@
gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
};
button@6 {
right-joystick-up {
label = "Right Joystick Up";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
@ -124,7 +123,7 @@
gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
};
button@7 {
right-joystick-down {
label = "Right Joystick Down";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
@ -132,7 +131,7 @@
gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
};
button@8 {
dpad-left {
label = "DPad Left";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
@ -140,7 +139,7 @@
gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
};
button@9 {
dpad-right {
label = "DPad Right";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
@ -148,7 +147,7 @@
gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
};
button@10 {
dpad-up {
label = "DPad Up";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
@ -156,7 +155,7 @@
gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
};
button@11 {
dpad-down {
label = "DPad Down";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
@ -164,49 +163,49 @@
gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
};
button@12 {
x {
label = "Button X";
linux,code = <BTN_X>;
gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
};
button@13 {
y {
label = "Button Y";
linux,code = <BTN_Y>;
gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
};
button@14 {
a {
label = "Button A";
linux,code = <BTN_A>;
gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
};
button@15 {
b {
label = "Button B";
linux,code = <BTN_B>;
gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
};
button@16 {
select {
label = "Select Button";
linux,code = <BTN_SELECT>;
gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
};
button@17 {
start {
label = "Start Button";
linux,code = <BTN_START>;
gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
};
button@18 {
top-left {
label = "Top Left Button";
linux,code = <BTN_TL>;
gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
};
button@19 {
top-right {
label = "Top Right Button";
linux,code = <BTN_TR>;
gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
@ -223,8 +222,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -236,8 +233,6 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/* Accelerometer */
@ -250,8 +245,6 @@
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
@ -268,35 +261,35 @@
vref-supply = <&reg_ldo2>;
status = "okay";
button@200 {
button-200 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <200000>;
};
button@600 {
button-600 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <600000>;
};
button@800 {
button-800 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <800000>;
};
button@1000 {
button-1000 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <1000000>;
};
button@1200 {
button-1200 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
@ -305,12 +298,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -319,29 +309,26 @@
};
&pio {
key_pins_inet9f: key_pins@0 {
allwinner,pins = "PA0", "PA1", "PA3", "PA4",
"PA5", "PA6", "PA8", "PA9",
"PA11", "PA12", "PA13",
"PA14", "PA15", "PA16", "PA17",
"PH22", "PH23", "PH24", "PH25", "PH26";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
key_pins_inet9f: key-pins {
pins = "PA0", "PA1", "PA3", "PA4",
"PA5", "PA6", "PA8", "PA9",
"PA11", "PA12", "PA13",
"PA14", "PA15", "PA16", "PA17",
"PH22", "PH23", "PH24", "PH25", "PH26";
function = "gpio_in";
bias-pull-up;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
};
@ -380,7 +367,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

24
arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
View File

@ -57,7 +57,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
pinctrl-0 = <&emac_pins>;
phy = <&phy1>;
status = "okay";
};
@ -67,6 +67,9 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
axp209: pmic@34 {
interrupts = <0>;
};
@ -74,19 +77,19 @@
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@ -100,11 +103,10 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -114,7 +116,11 @@
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>,
<&spi0_cs0_pins_a>;
pinctrl-0 = <&spi0_pi_pins>,
<&spi0_cs0_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-0 = <&uart0_pb_pins>;
};

34
arch/arm/dts/sun4i-a10-jesurun-q5.dts
View File

@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Jesurun Q5";
@ -63,8 +62,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_q5>;
green {
label = "q5:green:usr";
@ -75,8 +72,6 @@
reg_emac_3v3: emac-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&emac_power_pin_q5>;
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@ -99,8 +94,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@ -110,8 +103,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -126,7 +117,7 @@
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@ -140,12 +131,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -161,22 +149,6 @@
status = "okay";
};
&pio {
emac_power_pin_q5: emac_power_pin@0 {
allwinner,pins = "PH19";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
led_pins_q5: led_pins@0 {
allwinner,pins = "PH20";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&reg_usb0_vbus {
regulator-boot-on;
status = "okay";
@ -192,7 +164,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

38
arch/arm/dts/sun4i-a10-marsboard.dts
View File

@ -46,7 +46,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "HAOYU Electronics Marsboard A10";
@ -62,8 +61,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_marsboard>;
red1 {
label = "marsboard:red1:usr";
@ -108,27 +105,19 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@ -141,12 +130,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -163,18 +149,10 @@
};
&pio {
led_pins_marsboard: led_pins@0 {
allwinner,pins = "PB5", "PB6", "PB7", "PB8";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
};
@ -188,14 +166,14 @@
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>,
<&spi0_cs0_pins_a>;
pinctrl-0 = <&spi0_pi_pins>,
<&spi0_cs0_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

16
arch/arm/dts/sun4i-a10-mini-xplus.dts
View File

@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "PineRiver Mini X-Plus";
@ -71,8 +70,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -87,22 +84,19 @@
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
&ir0_rx_pins_a {
&ir0_rx_pins {
/* The ir receiver is not always populated */
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
bias-pull-up;
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -133,7 +127,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

59
arch/arm/dts/sun4i-a10-mk802.dts
View File

@ -44,7 +44,6 @@
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "MK802";
@ -57,12 +56,27 @@
chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
};
&codec {
status = "okay";
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -71,13 +85,20 @@
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -89,29 +110,6 @@
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
allwinner,pins = "PH12";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&reg_usb0_vbus {
status = "okay";
};
@ -121,14 +119,13 @@
};
&reg_usb2_vbus {
pinctrl-0 = <&usb2_vbus_pin_mk802>;
gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
@ -138,8 +135,6 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;

9
arch/arm/dts/sun4i-a10-mk802ii.dts
View File

@ -67,8 +67,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -82,12 +80,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -105,7 +100,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

75
arch/arm/dts/sun4i-a10-olinuxino-lime.dts
View File

@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A10-OLinuXino-LIME";
@ -59,6 +58,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -87,7 +97,10 @@
864000 1300000
624000 1250000
>;
cooling-max-level = <2>;
};
&de {
status = "okay";
};
&ehci0 {
@ -99,8 +112,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@ -109,9 +120,17 @@
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -125,8 +144,6 @@
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
eeprom: eeprom@50 {
@ -145,12 +162,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -167,37 +181,26 @@
};
&pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
allwinner,pins = "PC3";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
led_pins_olinuxinolime: led-pin {
pins = "PH2";
function = "gpio_out";
drive-strength = <20>;
};
led_pins_olinuxinolime: led_pins@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
};
&reg_ahci_5v {
pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@ -216,7 +219,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

47
arch/arm/dts/sun4i-a10-pcduino.dts
View File

@ -47,7 +47,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "LinkSprite pcDuino";
@ -63,8 +62,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_pcduino>;
tx {
label = "pcduino:green:tx";
@ -77,26 +74,24 @@
};
};
gpio_keys {
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_pins_pcduino>;
#address-cells = <1>;
#size-cells = <0>;
button@0 {
back {
label = "Key Back";
linux,code = <KEY_BACK>;
gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
};
button@1 {
home {
label = "Key Home";
linux,code = <KEY_HOME>;
gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
};
button@2 {
menu {
label = "Key Menu";
linux,code = <KEY_MENU>;
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
@ -117,8 +112,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@ -128,8 +121,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -147,12 +138,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -169,25 +157,10 @@
};
&pio {
led_pins_pcduino: led_pins@0 {
allwinner,pins = "PH15", "PH16";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
key_pins_pcduino: key_pins@0 {
allwinner,pins = "PH17", "PH18", "PH19";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
};
@ -220,7 +193,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

11
arch/arm/dts/sun4i-a10-pcduino2.dts
View File

@ -55,18 +55,7 @@
compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
};
&pio {
usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 {
allwinner,pins = "PD2";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&reg_usb2_vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb2_vbus_pin_pcduino2>;
gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
status = "okay";
};

89
arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
View File

@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
@ -59,8 +58,6 @@
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&bl_en_pin_protab>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
@ -73,8 +70,6 @@
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
@ -88,8 +83,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -101,27 +94,14 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/* Accelerometer */
bma250@18 {
compatible = "bosch,bma250";
reg = <0x18>;
interrupt-parent = <&pio>;
interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
};
/* pull-ups and devices require AXP209 LDO3 */
status = "failed";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
pixcir_ts@5c {
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_pins>;
touchscreen@5c {
compatible = "pixcir,pixcir_tangoc";
reg = <0x5c>;
interrupt-parent = <&pio>;
@ -140,14 +120,14 @@
vref-supply = <&reg_ldo2>;
status = "okay";
button@400 {
button-400 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <400000>;
};
button@800 {
button-800 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@ -156,12 +136,9 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@ -170,45 +147,22 @@
};
&pio {
bl_en_pin_protab: bl_en_pin@0 {
allwinner,pins = "PH7";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
codec_pa_pin: codec_pa_pin@0 {
allwinner,pins = "PH15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
touchscreen_pins: touchscreen_pins@0 {
allwinner,pins = "PA5", "PB13";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@ -237,17 +191,6 @@
regulator-name = "avcc";
};
&reg_ldo3 {
/*
* We need to always power the camera sensor, otherwhise all access
* to i2c1 is blocked.
*/
regulator-always-on;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vdd-csi";
};
&reg_usb0_vbus {
status = "okay";
};
@ -258,7 +201,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

1385
arch/arm/dts/sun4i-a10.dtsi
View File

File diff suppressed because it is too large Load Diff

202
include/dt-bindings/clock/sun4i-a10-ccu.h Normal file
View File

@ -0,0 +1,202 @@
/*
* Copyright (C) 2017 Priit Laes <plaes@plaes.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#ifndef _DT_BINDINGS_CLK_SUN4I_A10_H_
#define _DT_BINDINGS_CLK_SUN4I_A10_H_
#define CLK_HOSC 1
#define CLK_PLL_VIDEO0_2X 9
#define CLK_PLL_VIDEO1_2X 18
#define CLK_CPU 20
/* AHB Gates */
#define CLK_AHB_OTG 26
#define CLK_AHB_EHCI0 27
#define CLK_AHB_OHCI0 28
#define CLK_AHB_EHCI1 29
#define CLK_AHB_OHCI1 30
#define CLK_AHB_SS 31
#define CLK_AHB_DMA 32
#define CLK_AHB_BIST 33
#define CLK_AHB_MMC0 34
#define CLK_AHB_MMC1 35
#define CLK_AHB_MMC2 36
#define CLK_AHB_MMC3 37
#define CLK_AHB_MS 38
#define CLK_AHB_NAND 39
#define CLK_AHB_SDRAM 40
#define CLK_AHB_ACE 41
#define CLK_AHB_EMAC 42
#define CLK_AHB_TS 43
#define CLK_AHB_SPI0 44
#define CLK_AHB_SPI1 45
#define CLK_AHB_SPI2 46
#define CLK_AHB_SPI3 47
#define CLK_AHB_PATA 48
#define CLK_AHB_SATA 49
#define CLK_AHB_GPS 50
#define CLK_AHB_HSTIMER 51
#define CLK_AHB_VE 52
#define CLK_AHB_TVD 53
#define CLK_AHB_TVE0 54
#define CLK_AHB_TVE1 55
#define CLK_AHB_LCD0 56
#define CLK_AHB_LCD1 57
#define CLK_AHB_CSI0 58
#define CLK_AHB_CSI1 59
#define CLK_AHB_HDMI0 60
#define CLK_AHB_HDMI1 61
#define CLK_AHB_DE_BE0 62
#define CLK_AHB_DE_BE1 63
#define CLK_AHB_DE_FE0 64
#define CLK_AHB_DE_FE1 65
#define CLK_AHB_GMAC 66
#define CLK_AHB_MP 67
#define CLK_AHB_GPU 68
/* APB0 Gates */
#define CLK_APB0_CODEC 69
#define CLK_APB0_SPDIF 70
#define CLK_APB0_I2S0 71
#define CLK_APB0_AC97 72
#define CLK_APB0_I2S1 73
#define CLK_APB0_PIO 74
#define CLK_APB0_IR0 75
#define CLK_APB0_IR1 76
#define CLK_APB0_I2S2 77
#define CLK_APB0_KEYPAD 78
/* APB1 Gates */
#define CLK_APB1_I2C0 79
#define CLK_APB1_I2C1 80
#define CLK_APB1_I2C2 81
#define CLK_APB1_I2C3 82
#define CLK_APB1_CAN 83
#define CLK_APB1_SCR 84
#define CLK_APB1_PS20 85
#define CLK_APB1_PS21 86
#define CLK_APB1_I2C4 87
#define CLK_APB1_UART0 88
#define CLK_APB1_UART1 89
#define CLK_APB1_UART2 90
#define CLK_APB1_UART3 91
#define CLK_APB1_UART4 92
#define CLK_APB1_UART5 93
#define CLK_APB1_UART6 94
#define CLK_APB1_UART7 95
/* IP clocks */
#define CLK_NAND 96
#define CLK_MS 97
#define CLK_MMC0 98
#define CLK_MMC0_OUTPUT 99
#define CLK_MMC0_SAMPLE 100
#define CLK_MMC1 101
#define CLK_MMC1_OUTPUT 102
#define CLK_MMC1_SAMPLE 103
#define CLK_MMC2 104
#define CLK_MMC2_OUTPUT 105
#define CLK_MMC2_SAMPLE 106
#define CLK_MMC3 107
#define CLK_MMC3_OUTPUT 108
#define CLK_MMC3_SAMPLE 109
#define CLK_TS 110
#define CLK_SS 111
#define CLK_SPI0 112
#define CLK_SPI1 113
#define CLK_SPI2 114
#define CLK_PATA 115
#define CLK_IR0 116
#define CLK_IR1 117
#define CLK_I2S0 118
#define CLK_AC97 119
#define CLK_SPDIF 120
#define CLK_KEYPAD 121
#define CLK_SATA 122
#define CLK_USB_OHCI0 123
#define CLK_USB_OHCI1 124
#define CLK_USB_PHY 125
#define CLK_GPS 126
#define CLK_SPI3 127
#define CLK_I2S1 128
#define CLK_I2S2 129
/* DRAM Gates */
#define CLK_DRAM_VE 130
#define CLK_DRAM_CSI0 131
#define CLK_DRAM_CSI1 132
#define CLK_DRAM_TS 133
#define CLK_DRAM_TVD 134
#define CLK_DRAM_TVE0 135
#define CLK_DRAM_TVE1 136
#define CLK_DRAM_OUT 137
#define CLK_DRAM_DE_FE1 138
#define CLK_DRAM_DE_FE0 139
#define CLK_DRAM_DE_BE0 140
#define CLK_DRAM_DE_BE1 141
#define CLK_DRAM_MP 142
#define CLK_DRAM_ACE 143
/* Display Engine Clocks */
#define CLK_DE_BE0 144
#define CLK_DE_BE1 145
#define CLK_DE_FE0 146
#define CLK_DE_FE1 147
#define CLK_DE_MP 148
#define CLK_TCON0_CH0 149
#define CLK_TCON1_CH0 150
#define CLK_CSI_SCLK 151
#define CLK_TVD_SCLK2 152
#define CLK_TVD 153
#define CLK_TCON0_CH1_SCLK2 154
#define CLK_TCON0_CH1 155
#define CLK_TCON1_CH1_SCLK2 156
#define CLK_TCON1_CH1 157
#define CLK_CSI0 158
#define CLK_CSI1 159
#define CLK_CODEC 160
#define CLK_VE 161
#define CLK_AVS 162
#define CLK_ACE 163
#define CLK_HDMI 164
#define CLK_GPU 165
#endif /* _DT_BINDINGS_CLK_SUN4I_A10_H_ */

69
include/dt-bindings/reset/sun4i-a10-ccu.h Normal file
View File

@ -0,0 +1,69 @@
/*
* Copyright (C) 2017 Priit Laes <plaes@plaes.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#ifndef _DT_BINDINGS_RST_SUN4I_A10_H
#define _DT_BINDINGS_RST_SUN4I_A10_H
#define RST_USB_PHY0 1
#define RST_USB_PHY1 2
#define RST_USB_PHY2 3
#define RST_GPS 4
#define RST_DE_BE0 5
#define RST_DE_BE1 6
#define RST_DE_FE0 7
#define RST_DE_FE1 8
#define RST_DE_MP 9
#define RST_TVE0 10
#define RST_TCON0 11
#define RST_TVE1 12
#define RST_TCON1 13
#define RST_CSI0 14
#define RST_CSI1 15
#define RST_VE 16
#define RST_ACE 17
#define RST_LVDS 18
#define RST_GPU 19
#define RST_HDMI_H 20
#define RST_HDMI_SYS 21
#define RST_HDMI_AUDIO_DMA 22
#endif /* DT_BINDINGS_RST_SUN4I_A10_H */