omap3evm: move common config options to new file
This patch moves common config options to a new file. Common options can now be included in other board configs for this evm. Signed-off-by: Sanjeev Premi <premi@ti.com> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
This commit is contained in:
Sanjeev Premi
Albert ARIBAUD
parent
741de26618
commit
3970884c84
@ -36,27 +36,19 @@
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/omap3.h>
|
||||
|
||||
/* =============================================================================
|
||||
* This section holds the common definitions that correspond to the
|
||||
* current default configuration - omap3_evm_config
|
||||
* =============================================================================
|
||||
*/
|
||||
|
||||
/* ----------------------------------------------------------------------------
|
||||
* Supported U-boot commands
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/* Default commands to include */
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_EXT2 /* EXT2 Support */
|
||||
#define CONFIG_CMD_FAT /* FAT support */
|
||||
#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
|
||||
#define CONFIG_CMD_EXT2
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_JFFS2
|
||||
|
||||
#define CONFIG_CMD_I2C /* I2C serial bus support */
|
||||
#define CONFIG_CMD_MMC /* MMC support */
|
||||
#define CONFIG_CMD_NAND /* NAND support */
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_MMC
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_PING
|
||||
|
||||
@ -103,327 +95,16 @@
|
||||
/* #define CONFIG_MUSB_UDC */
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* Default environment
|
||||
* Include common board configuration
|
||||
* -----------------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_BOOTDELAY 10
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"loadaddr=0x82000000\0" \
|
||||
"usbtty=cdc_acm\0" \
|
||||
"mmcdev=0\0" \
|
||||
"memsize=128M\0" \
|
||||
"console=ttyO0,115200n8\0" \
|
||||
"mmcargs=setenv bootargs console=${console} " \
|
||||
"mem=${memsize}\0 " \
|
||||
"root=/dev/mmcblk0p2 rw " \
|
||||
"rootfstype=ext3 rootwait\0" \
|
||||
"nandargs=setenv bootargs console=${console} " \
|
||||
"mem=${memsize}\0 " \
|
||||
"root=/dev/mtdblock4 rw " \
|
||||
"rootfstype=jffs2\0" \
|
||||
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
|
||||
"bootscript=echo Running bootscript from mmc ...; " \
|
||||
"source ${loadaddr}\0" \
|
||||
"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"nandboot=echo Booting from nand ...; " \
|
||||
"run nandargs; " \
|
||||
"onenand read ${loadaddr} 280000 400000; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"if mmc rescan ${mmcdev}; then " \
|
||||
"if run loadbootscript; then " \
|
||||
"run bootscript; " \
|
||||
"else " \
|
||||
"if run loaduimage; then " \
|
||||
"run mmcboot; " \
|
||||
"else run nandboot; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else run nandboot; fi"
|
||||
|
||||
/* =============================================================================
|
||||
* This section holds the common definitions that can be used by
|
||||
* all OMAP3EVM based configurations.
|
||||
* =============================================================================
|
||||
*/
|
||||
|
||||
/*
|
||||
* High level configuration options
|
||||
*/
|
||||
#define CONFIG_OMAP /* This is TI OMAP core */
|
||||
#define CONFIG_OMAP34XX /* belonging to 34XX family */
|
||||
#define CONFIG_OMAP3430 /* which is in a 3430 */
|
||||
|
||||
#define CONFIG_SDRC /* The chip has SDRC controller */
|
||||
|
||||
#define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */
|
||||
#define CONFIG_OMAP3_MICRON_DDR /* with MICRON DDR part */
|
||||
#define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */
|
||||
|
||||
#undef CONFIG_USE_IRQ /* no support for IRQs */
|
||||
|
||||
/*
|
||||
* Clock related definitions
|
||||
*/
|
||||
#define V_OSCK 26000000 /* Clock output from T2 */
|
||||
#define V_SCLK (V_OSCK >> 1)
|
||||
|
||||
/*
|
||||
* OMAP3 has 12 GP timers, they can be driven by the system clock
|
||||
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
|
||||
* This rate is divided by a local divisor.
|
||||
*/
|
||||
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
|
||||
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
/* Size of environment - 128KB */
|
||||
#define CONFIG_ENV_SIZE (128 << 10)
|
||||
|
||||
/* Size of malloc pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
|
||||
|
||||
/*
|
||||
* Stack sizes
|
||||
* These values are used in start.S
|
||||
*/
|
||||
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
|
||||
|
||||
#ifdef CONFIG_USE_IRQ
|
||||
#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
|
||||
#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Physical Memory Map
|
||||
* Note 1: CS1 may or may not be populated
|
||||
* Note 2: SDRAM size is expected to be at least 32MB
|
||||
*/
|
||||
#define CONFIG_NR_DRAM_BANKS 2
|
||||
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
|
||||
#define PHYS_SDRAM_1_SIZE (32 << 20)
|
||||
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
|
||||
|
||||
/* SDRAM Bank Allocation method */
|
||||
#define SDRC_R_B_C
|
||||
|
||||
/* Limits for memtest */
|
||||
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
|
||||
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
|
||||
0x01F00000) /* 31MB */
|
||||
|
||||
/* Default load address */
|
||||
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* Hardware drivers
|
||||
* -----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/*
|
||||
* NS16550 Configuration
|
||||
*/
|
||||
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
|
||||
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
||||
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
||||
|
||||
/*
|
||||
* select serial console configuration
|
||||
*/
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */
|
||||
#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
|
||||
115200}
|
||||
|
||||
/*
|
||||
* I2C
|
||||
*/
|
||||
#define CONFIG_HARD_I2C
|
||||
#define CONFIG_DRIVER_OMAP34XX_I2C
|
||||
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
#define CONFIG_SYS_I2C_SLAVE 1
|
||||
#define CONFIG_SYS_I2C_BUS 0
|
||||
#define CONFIG_SYS_I2C_BUS_SELECT 1
|
||||
|
||||
/*
|
||||
* PISMO support
|
||||
*/
|
||||
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
|
||||
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
|
||||
|
||||
/* Monitor at start of flash - Reserve 2 sectors */
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
|
||||
|
||||
/* Start location & size of environment */
|
||||
#define ONENAND_ENV_OFFSET 0x260000
|
||||
#define SMNAND_ENV_OFFSET 0x260000
|
||||
|
||||
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
|
||||
|
||||
/*
|
||||
* NAND
|
||||
*/
|
||||
/* Physical address to access NAND */
|
||||
#define CONFIG_SYS_NAND_ADDR NAND_BASE
|
||||
|
||||
/* Physical address to access NAND at CS0 */
|
||||
#define CONFIG_SYS_NAND_BASE NAND_BASE
|
||||
|
||||
/* Max number of NAND devices */
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
|
||||
/* Timeout values (in ticks) */
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
|
||||
|
||||
/* Flash banks JFFS2 should use */
|
||||
#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
|
||||
CONFIG_SYS_MAX_NAND_DEVICE)
|
||||
|
||||
#define CONFIG_SYS_JFFS2_MEM_NAND
|
||||
#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
|
||||
#define CONFIG_SYS_JFFS2_NUM_BANKS 1
|
||||
|
||||
#define CONFIG_JFFS2_NAND
|
||||
/* nand device jffs2 lives on */
|
||||
#define CONFIG_JFFS2_DEV "nand0"
|
||||
/* Start of jffs2 partition */
|
||||
#define CONFIG_JFFS2_PART_OFFSET 0x680000
|
||||
/* Size of jffs2 partition */
|
||||
#define CONFIG_JFFS2_PART_SIZE 0xf980000
|
||||
|
||||
/*
|
||||
* USB
|
||||
*/
|
||||
#ifdef CONFIG_USB_OMAP3
|
||||
|
||||
#ifdef CONFIG_MUSB_HCD
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONGIG_CMD_STORAGE
|
||||
#define CONFIG_CMD_FAT
|
||||
|
||||
#ifdef CONFIG_USB_KEYBOARD
|
||||
#define CONFIG_SYS_USB_EVENT_POLL
|
||||
#define CONFIG_PREBOOT "usb start"
|
||||
#endif /* CONFIG_USB_KEYBOARD */
|
||||
|
||||
#endif /* CONFIG_MUSB_HCD */
|
||||
|
||||
#ifdef CONFIG_MUSB_UDC
|
||||
/* USB device configuration */
|
||||
#define CONFIG_USB_DEVICE
|
||||
#define CONFIG_USB_TTY
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
|
||||
/* Change these to suit your needs */
|
||||
#define CONFIG_USBD_VENDORID 0x0451
|
||||
#define CONFIG_USBD_PRODUCTID 0x5678
|
||||
#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
|
||||
#define CONFIG_USBD_PRODUCT_NAME "EVM"
|
||||
#endif /* CONFIG_MUSB_UDC */
|
||||
|
||||
#endif /* CONFIG_USB_OMAP3 */
|
||||
|
||||
/* ----------------------------------------------------------------------------
|
||||
* U-boot features
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_SYS_PROMPT "OMAP3_EVM # "
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max args for a command */
|
||||
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_REVISION_TAG
|
||||
|
||||
/* Size of Console IO buffer */
|
||||
#define CONFIG_SYS_CBSIZE 512
|
||||
|
||||
/* Size of print buffer */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
|
||||
/* Size of bootarg buffer */
|
||||
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
|
||||
|
||||
#define CONFIG_BOOTFILE uImage
|
||||
|
||||
/*
|
||||
* NAND / OneNAND
|
||||
*/
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
|
||||
|
||||
#define CONFIG_NAND_OMAP_GPMC
|
||||
#define GPMC_NAND_ECC_LP_x16_LAYOUT
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
|
||||
#elif defined(CONFIG_CMD_ONENAND)
|
||||
#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE
|
||||
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
|
||||
|
||||
#define CONFIG_ENV_IS_IN_ONENAND
|
||||
#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET
|
||||
#endif
|
||||
|
||||
#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
|
||||
|
||||
#if defined(CONFIG_CMD_NET)
|
||||
|
||||
/* Ethernet (SMSC9115 from SMSC9118 family) */
|
||||
#define CONFIG_SMC911X
|
||||
#define CONFIG_SMC911X_32_BIT
|
||||
#define CONFIG_SMC911X_BASE 0x2C000000
|
||||
|
||||
/* BOOTP fields */
|
||||
#define CONFIG_BOOTP_SUBNETMASK 0x00000001
|
||||
#define CONFIG_BOOTP_GATEWAY 0x00000002
|
||||
#define CONFIG_BOOTP_HOSTNAME 0x00000004
|
||||
#define CONFIG_BOOTP_BOOTPATH 0x00000010
|
||||
|
||||
#endif /* CONFIG_CMD_NET */
|
||||
|
||||
/* Support for relocation */
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
||||
CONFIG_SYS_INIT_RAM_SIZE - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* Board specific
|
||||
* -----------------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
/* Uncomment to define the board revision statically */
|
||||
/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */
|
||||
#include "omap3_evm_common.h"
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* Default environment
|
||||
* -----------------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_BOOTDELAY 10
|
||||
#define CONFIG_BOOTFILE "uImage"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"loadaddr=0x82000000\0" \
|
||||
|
||||
287
include/configs/omap3_evm_common.h
Normal file
287
include/configs/omap3_evm_common.h
Normal file
@ -0,0 +1,287 @@
|
||||
/*
|
||||
* Common configuration settings for the TI OMAP3 EVM board.
|
||||
*
|
||||
* Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
||||
* kind, whether express or implied; without even the implied warranty
|
||||
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef __OMAP3_EVM_COMMON_H
|
||||
#define __OMAP3_EVM_COMMON_H
|
||||
|
||||
/*
|
||||
* High level configuration options
|
||||
*/
|
||||
#define CONFIG_OMAP /* This is TI OMAP core */
|
||||
#define CONFIG_OMAP34XX /* belonging to 34XX family */
|
||||
#define CONFIG_OMAP3430 /* which is in a 3430 */
|
||||
|
||||
#define CONFIG_SDRC /* The chip has SDRC controller */
|
||||
|
||||
#define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */
|
||||
#define CONFIG_OMAP3_MICRON_DDR /* with MICRON DDR part */
|
||||
#define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */
|
||||
|
||||
#undef CONFIG_USE_IRQ /* no support for IRQs */
|
||||
|
||||
/*
|
||||
* Clock related definitions
|
||||
*/
|
||||
#define V_OSCK 26000000 /* Clock output from T2 */
|
||||
#define V_SCLK (V_OSCK >> 1)
|
||||
|
||||
/*
|
||||
* OMAP3 has 12 GP timers, they can be driven by the system clock
|
||||
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
|
||||
* This rate is divided by a local divisor.
|
||||
*/
|
||||
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
|
||||
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
/* Size of environment - 128KB */
|
||||
#define CONFIG_ENV_SIZE (128 << 10)
|
||||
|
||||
/* Size of malloc pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
|
||||
|
||||
/*
|
||||
* Stack sizes
|
||||
* These values are used in start.S
|
||||
*/
|
||||
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
|
||||
|
||||
#ifdef CONFIG_USE_IRQ
|
||||
#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
|
||||
#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Physical Memory Map
|
||||
* Note 1: CS1 may or may not be populated
|
||||
* Note 2: SDRAM size is expected to be at least 32MB
|
||||
*/
|
||||
#define CONFIG_NR_DRAM_BANKS 2
|
||||
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
|
||||
#define PHYS_SDRAM_1_SIZE (32 << 20)
|
||||
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
|
||||
|
||||
/* SDRAM Bank Allocation method */
|
||||
#define SDRC_R_B_C
|
||||
|
||||
/* Limits for memtest */
|
||||
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
|
||||
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
|
||||
0x01F00000) /* 31MB */
|
||||
|
||||
/* Default load address */
|
||||
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* Hardware drivers
|
||||
* -----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/*
|
||||
* NS16550 Configuration
|
||||
*/
|
||||
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
|
||||
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
||||
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
||||
|
||||
/*
|
||||
* select serial console configuration
|
||||
*/
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */
|
||||
#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
|
||||
115200}
|
||||
|
||||
/*
|
||||
* I2C
|
||||
*/
|
||||
#define CONFIG_HARD_I2C
|
||||
#define CONFIG_DRIVER_OMAP34XX_I2C
|
||||
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
#define CONFIG_SYS_I2C_SLAVE 1
|
||||
#define CONFIG_SYS_I2C_BUS 0
|
||||
#define CONFIG_SYS_I2C_BUS_SELECT 1
|
||||
|
||||
/*
|
||||
* PISMO support
|
||||
*/
|
||||
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
|
||||
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
|
||||
|
||||
/* Monitor at start of flash - Reserve 2 sectors */
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
|
||||
|
||||
/* Start location & size of environment */
|
||||
#define ONENAND_ENV_OFFSET 0x260000
|
||||
#define SMNAND_ENV_OFFSET 0x260000
|
||||
|
||||
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
|
||||
|
||||
/*
|
||||
* NAND
|
||||
*/
|
||||
/* Physical address to access NAND */
|
||||
#define CONFIG_SYS_NAND_ADDR NAND_BASE
|
||||
|
||||
/* Physical address to access NAND at CS0 */
|
||||
#define CONFIG_SYS_NAND_BASE NAND_BASE
|
||||
|
||||
/* Max number of NAND devices */
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
|
||||
/* Timeout values (in ticks) */
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
|
||||
|
||||
/* Flash banks JFFS2 should use */
|
||||
#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
|
||||
CONFIG_SYS_MAX_NAND_DEVICE)
|
||||
|
||||
#define CONFIG_SYS_JFFS2_MEM_NAND
|
||||
#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
|
||||
#define CONFIG_SYS_JFFS2_NUM_BANKS 1
|
||||
|
||||
#define CONFIG_JFFS2_NAND
|
||||
/* nand device jffs2 lives on */
|
||||
#define CONFIG_JFFS2_DEV "nand0"
|
||||
/* Start of jffs2 partition */
|
||||
#define CONFIG_JFFS2_PART_OFFSET 0x680000
|
||||
/* Size of jffs2 partition */
|
||||
#define CONFIG_JFFS2_PART_SIZE 0xf980000
|
||||
|
||||
/*
|
||||
* USB
|
||||
*/
|
||||
#ifdef CONFIG_USB_OMAP3
|
||||
|
||||
#ifdef CONFIG_MUSB_HCD
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONGIG_CMD_STORAGE
|
||||
#define CONFIG_CMD_FAT
|
||||
|
||||
#ifdef CONFIG_USB_KEYBOARD
|
||||
#define CONFIG_SYS_USB_EVENT_POLL
|
||||
#define CONFIG_PREBOOT "usb start"
|
||||
#endif /* CONFIG_USB_KEYBOARD */
|
||||
|
||||
#endif /* CONFIG_MUSB_HCD */
|
||||
|
||||
#ifdef CONFIG_MUSB_UDC
|
||||
/* USB device configuration */
|
||||
#define CONFIG_USB_DEVICE
|
||||
#define CONFIG_USB_TTY
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
|
||||
/* Change these to suit your needs */
|
||||
#define CONFIG_USBD_VENDORID 0x0451
|
||||
#define CONFIG_USBD_PRODUCTID 0x5678
|
||||
#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
|
||||
#define CONFIG_USBD_PRODUCT_NAME "EVM"
|
||||
#endif /* CONFIG_MUSB_UDC */
|
||||
|
||||
#endif /* CONFIG_USB_OMAP3 */
|
||||
|
||||
/* ----------------------------------------------------------------------------
|
||||
* U-boot features
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_SYS_PROMPT "OMAP3_EVM # "
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max args for a command */
|
||||
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_REVISION_TAG
|
||||
|
||||
/* Size of Console IO buffer */
|
||||
#define CONFIG_SYS_CBSIZE 512
|
||||
|
||||
/* Size of print buffer */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
|
||||
/* Size of bootarg buffer */
|
||||
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
|
||||
|
||||
#define CONFIG_BOOTFILE "uImage"
|
||||
|
||||
/*
|
||||
* NAND / OneNAND
|
||||
*/
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
|
||||
|
||||
#define CONFIG_NAND_OMAP_GPMC
|
||||
#define GPMC_NAND_ECC_LP_x16_LAYOUT
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
|
||||
#elif defined(CONFIG_CMD_ONENAND)
|
||||
#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE
|
||||
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
|
||||
|
||||
#define CONFIG_ENV_IS_IN_ONENAND
|
||||
#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET
|
||||
#endif
|
||||
|
||||
#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
|
||||
|
||||
#if defined(CONFIG_CMD_NET)
|
||||
|
||||
/* Ethernet (SMSC9115 from SMSC9118 family) */
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_SMC911X
|
||||
#define CONFIG_SMC911X_32_BIT
|
||||
#define CONFIG_SMC911X_BASE 0x2C000000
|
||||
|
||||
/* BOOTP fields */
|
||||
#define CONFIG_BOOTP_SUBNETMASK 0x00000001
|
||||
#define CONFIG_BOOTP_GATEWAY 0x00000002
|
||||
#define CONFIG_BOOTP_HOSTNAME 0x00000004
|
||||
#define CONFIG_BOOTP_BOOTPATH 0x00000010
|
||||
|
||||
#endif /* CONFIG_CMD_NET */
|
||||
|
||||
/* Support for relocation */
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
||||
CONFIG_SYS_INIT_RAM_SIZE - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* Board specific
|
||||
* -----------------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
/* Uncomment to define the board revision statically */
|
||||
/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */
|
||||
|
||||
#endif /* __OMAP3_EVM_COMMON_H */
|
||||
Loading…
Reference in New Issue
Block a user