* Patch by Robert Schwebel, 04 Nov 2002:
- use watchdog to reset PXA250 systems - added progress callbacks to (some of the) ARM code - update for Cogent CSB226 board * Add support for FPS860 board
This commit is contained in:
wdenk
parent
e95b61cfb0
commit
384ae02506
@ -2,6 +2,13 @@
|
||||
Changes since for U-Boot 0.1.0:
|
||||
======================================================================
|
||||
|
||||
* Patch by Robert Schwebel, 04 Nov 2002:
|
||||
- use watchdog to reset PXA250 systems
|
||||
- added progress callbacks to (some of the) ARM code
|
||||
- update for Cogent CSB226 board
|
||||
|
||||
* Add support for FPS860 board
|
||||
|
||||
* Patch by Guillaume Alexandre,, 04 Nov 2002:
|
||||
Improve PCI access on 32-bits Compact PCI bus
|
||||
|
||||
|
||||
@ -49,6 +49,7 @@ Wolfgang Denk <wd@denx.de>
|
||||
AMX860 MPC860
|
||||
ETX094 MPC850
|
||||
FPS850L MPC850
|
||||
FPS860L MPC860
|
||||
ICU862 MPC862
|
||||
IP860 MPC860
|
||||
IVML24 MPC860
|
||||
|
||||
1
Makefile
1
Makefile
@ -322,6 +322,7 @@ SXNI855T_config: unconfig
|
||||
xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _LCD,,$(subst _FEC,,$(subst _config,,$1)))))
|
||||
|
||||
FPS850L_config \
|
||||
FPS860L_config \
|
||||
TQM823L_config \
|
||||
TQM823L_66MHz_config \
|
||||
TQM823L_80MHz_config \
|
||||
|
||||
4
README
4
README
@ -320,7 +320,7 @@ The following options need to be configured:
|
||||
CONFIG_GENIETV, CONFIG_PM826, CONFIG_ppmc8260,
|
||||
CONFIG_GTH, CONFIG_RPXClassic, CONFIG_rsdproto,
|
||||
CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260,
|
||||
CONFIG_EBONY, CONFIG_sacsng
|
||||
CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L
|
||||
|
||||
ARM based boards:
|
||||
-----------------
|
||||
@ -1665,7 +1665,7 @@ configurations; the following names are supported:
|
||||
FADS860T_config SXNI855T_config rsdproto_config
|
||||
FPS850L_config Sandpoint8240_config sbc8260_config
|
||||
GENIETV_config TQM823L_config PIP405_config
|
||||
GEN860T_config EBONY_config
|
||||
GEN860T_config EBONY_config FPS860L_config
|
||||
|
||||
Note: for some board special configuration names may exist; check if
|
||||
additional information is available from the board vendor; for
|
||||
|
||||
@ -24,14 +24,25 @@
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
#ifdef CONFIG_SHOW_BOOT_PROGRESS
|
||||
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
|
||||
#else
|
||||
# define SHOW_BOOT_PROGRESS(arg)
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Miscelaneous platform dependent initialisations
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* board_init: - setup some data structures
|
||||
*
|
||||
* @return: 0 in case of success
|
||||
*/
|
||||
|
||||
int board_init (void)
|
||||
{
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
@ -48,6 +59,13 @@ int board_init (void)
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* dram_init: - setup dynamic RAM
|
||||
*
|
||||
* @return: 0 in case of success
|
||||
*/
|
||||
|
||||
int dram_init (void)
|
||||
{
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
@ -57,3 +75,62 @@ int dram_init (void)
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* csb226_set_led: - switch LEDs on or off
|
||||
*
|
||||
* @param led: LED to switch (0,1,2)
|
||||
* @param state: switch on (1) or off (0)
|
||||
*/
|
||||
|
||||
void csb226_set_led(int led, int state)
|
||||
{
|
||||
switch(led) {
|
||||
|
||||
case 0: if (state==1) {
|
||||
GPCR0 |= CSB226_USER_LED0;
|
||||
} else if (state==0) {
|
||||
GPSR0 |= CSB226_USER_LED0;
|
||||
}
|
||||
break;
|
||||
|
||||
case 1: if (state==1) {
|
||||
GPCR0 |= CSB226_USER_LED1;
|
||||
} else if (state==0) {
|
||||
GPSR0 |= CSB226_USER_LED1;
|
||||
}
|
||||
break;
|
||||
|
||||
case 2: if (state==1) {
|
||||
GPCR0 |= CSB226_USER_LED2;
|
||||
} else if (state==0) {
|
||||
GPSR0 |= CSB226_USER_LED2;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* show_boot_progress: - indicate state of the boot process
|
||||
*
|
||||
* @param status: Status number - see README for details.
|
||||
*
|
||||
* The CSB226 does only have 3 LEDs, so we switch them on at the most
|
||||
* important states (1, 5, 15).
|
||||
*/
|
||||
|
||||
void show_boot_progress (int status)
|
||||
{
|
||||
switch(status) {
|
||||
case 1: csb226_set_led(0,1); break;
|
||||
case 5: csb226_set_led(1,1); break;
|
||||
case 15: csb226_set_led(2,1); break;
|
||||
}
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
@ -6,6 +6,9 @@
|
||||
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
||||
* Marius Groeger <mgroeger@sysgo.de>
|
||||
*
|
||||
* (C) Copyright 2002
|
||||
* Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
@ -26,6 +29,7 @@
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
|
||||
#define FLASH_BANK_SIZE 0x02000000
|
||||
#define MAIN_SECT_SIZE 0x40000 /* 2x16 = 256k per sector */
|
||||
@ -33,7 +37,10 @@
|
||||
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
/**
|
||||
* flash_init: - initialize data structures for flash chips
|
||||
*
|
||||
* @return: size of the flash
|
||||
*/
|
||||
|
||||
ulong flash_init(void)
|
||||
@ -41,8 +48,7 @@ ulong flash_init(void)
|
||||
int i, j;
|
||||
ulong size = 0;
|
||||
|
||||
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
|
||||
{
|
||||
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
|
||||
ulong flashbase = 0;
|
||||
flash_info[i].flash_id =
|
||||
(INTEL_MANUFACT & FLASH_VENDMASK) |
|
||||
@ -51,8 +57,7 @@ ulong flash_init(void)
|
||||
flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
|
||||
memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
|
||||
|
||||
switch (i)
|
||||
{
|
||||
switch (i) {
|
||||
case 0:
|
||||
flashbase = PHYS_FLASH_1;
|
||||
break;
|
||||
@ -60,15 +65,13 @@ ulong flash_init(void)
|
||||
panic("configured to many flash banks!\n");
|
||||
break;
|
||||
}
|
||||
for (j = 0; j < flash_info[i].sector_count; j++)
|
||||
{
|
||||
for (j = 0; j < flash_info[i].sector_count; j++) {
|
||||
flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
|
||||
}
|
||||
size += flash_info[i].size;
|
||||
}
|
||||
|
||||
/* Protect monitor and environment sectors
|
||||
*/
|
||||
/* Protect monitor and environment sectors */
|
||||
flash_protect(FLAG_PROTECT_SET,
|
||||
CFG_FLASH_BASE,
|
||||
CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
|
||||
@ -82,16 +85,21 @@ ulong flash_init(void)
|
||||
return size;
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
|
||||
/**
|
||||
* flash_print_info: - print information about the flash situation
|
||||
*
|
||||
* @param info:
|
||||
*/
|
||||
|
||||
void flash_print_info (flash_info_t *info)
|
||||
{
|
||||
int i, j;
|
||||
|
||||
for (j=0; j<CFG_MAX_FLASH_BANKS; j++)
|
||||
{
|
||||
switch (info->flash_id & FLASH_VENDMASK)
|
||||
{
|
||||
for (j=0; j<CFG_MAX_FLASH_BANKS; j++) {
|
||||
|
||||
switch (info->flash_id & FLASH_VENDMASK) {
|
||||
|
||||
case (INTEL_MANUFACT & FLASH_VENDMASK):
|
||||
printf("Intel: ");
|
||||
break;
|
||||
@ -100,38 +108,35 @@ void flash_print_info (flash_info_t *info)
|
||||
break;
|
||||
}
|
||||
|
||||
switch (info->flash_id & FLASH_TYPEMASK)
|
||||
{
|
||||
switch (info->flash_id & FLASH_TYPEMASK) {
|
||||
|
||||
case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
|
||||
printf("28F128J3 (128Mbit)\n");
|
||||
break;
|
||||
default:
|
||||
printf("Unknown Chip Type\n");
|
||||
goto Done;
|
||||
break;
|
||||
return;
|
||||
}
|
||||
|
||||
printf(" Size: %ld MB in %d Sectors\n",
|
||||
info->size >> 20, info->sector_count);
|
||||
|
||||
printf(" Sector Start Addresses:");
|
||||
for (i = 0; i < info->sector_count; i++)
|
||||
{
|
||||
if ((i % 5) == 0)
|
||||
{
|
||||
printf ("\n ");
|
||||
}
|
||||
for (i = 0; i < info->sector_count; i++) {
|
||||
if ((i % 5) == 0) printf ("\n ");
|
||||
|
||||
printf (" %08lX%s", info->start[i],
|
||||
info->protect[i] ? " (RO)" : " ");
|
||||
}
|
||||
printf ("\n");
|
||||
info++;
|
||||
}
|
||||
|
||||
Done:
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
|
||||
/**
|
||||
* flash_erase: - erase flash sectors
|
||||
*
|
||||
*/
|
||||
|
||||
int flash_erase (flash_info_t *info, int s_first, int s_last)
|
||||
@ -146,19 +151,15 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
|
||||
return ERR_INVAL;
|
||||
}
|
||||
|
||||
if ((info->flash_id & FLASH_VENDMASK) !=
|
||||
(INTEL_MANUFACT & FLASH_VENDMASK)) {
|
||||
if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
|
||||
return ERR_UNKNOWN_FLASH_VENDOR;
|
||||
}
|
||||
|
||||
prot = 0;
|
||||
for (sect=s_first; sect<=s_last; ++sect) {
|
||||
if (info->protect[sect]) {
|
||||
prot++;
|
||||
if (info->protect[sect]) prot++;
|
||||
}
|
||||
}
|
||||
if (prot)
|
||||
return ERR_PROTECTED;
|
||||
|
||||
if (prot) return ERR_PROTECTED;
|
||||
|
||||
/*
|
||||
* Disable interrupts which might cause a timeout
|
||||
@ -178,57 +179,63 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
|
||||
reset_timer_masked();
|
||||
|
||||
if (info->protect[sect] == 0) { /* not protected */
|
||||
/* vushort *addr = (vushort *)(info->start[sect]); */
|
||||
ushort *addr = (ushort *)(info->start[sect]);
|
||||
u32 * volatile addr = (u32 * volatile)(info->start[sect]);
|
||||
|
||||
*addr = 0x20; /* erase setup */
|
||||
*addr = 0xD0; /* erase confirm */
|
||||
/* erase sector: */
|
||||
/* The strata flashs are aligned side by side on */
|
||||
/* the data bus, so we have to write the commands */
|
||||
/* to both chips here: */
|
||||
|
||||
while ((*addr & 0x80) != 0x80) {
|
||||
*addr = 0x00200020; /* erase setup */
|
||||
*addr = 0x00D000D0; /* erase confirm */
|
||||
|
||||
while ((*addr & 0x00800080) != 0x00800080) {
|
||||
if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
|
||||
*addr = 0xB0; /* suspend erase */
|
||||
*addr = 0xFF; /* reset to read mode */
|
||||
*addr = 0x00B000B0; /* suspend erase*/
|
||||
*addr = 0x00FF00FF; /* read mode */
|
||||
rc = ERR_TIMOUT;
|
||||
goto outahere;
|
||||
}
|
||||
}
|
||||
|
||||
/* clear status register command */
|
||||
*addr = 0x50;
|
||||
/* reset to read mode */
|
||||
*addr = 0xFF;
|
||||
*addr = 0x00500050; /* clear status register cmd. */
|
||||
*addr = 0x00FF00FF; /* resest to read mode */
|
||||
|
||||
}
|
||||
|
||||
printf("ok.\n");
|
||||
}
|
||||
if (ctrlc())
|
||||
printf("User Interrupt!\n");
|
||||
|
||||
if (ctrlc()) printf("User Interrupt!\n");
|
||||
|
||||
outahere:
|
||||
|
||||
/* allow flash to settle - wait 10 ms */
|
||||
udelay_masked(10000);
|
||||
|
||||
if (flag)
|
||||
enable_interrupts();
|
||||
if (flag) enable_interrupts();
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Copy memory to flash
|
||||
|
||||
/**
|
||||
* write_word: - copy memory to flash
|
||||
*
|
||||
* @param info:
|
||||
* @param dest:
|
||||
* @param data:
|
||||
* @return:
|
||||
*/
|
||||
|
||||
static int write_word (flash_info_t *info, ulong dest, ushort data)
|
||||
{
|
||||
/* vushort *addr = (vushort *)dest, val; */
|
||||
ushort *addr = (ushort *)dest, val;
|
||||
int rc = ERR_OK;
|
||||
int flag;
|
||||
|
||||
/* Check if Flash is (sufficiently) erased
|
||||
*/
|
||||
if ((*addr & data) != data)
|
||||
return ERR_NOT_ERASED;
|
||||
/* Check if Flash is (sufficiently) erased */
|
||||
if ((*addr & data) != data) return ERR_NOT_ERASED;
|
||||
|
||||
/*
|
||||
* Disable interrupts which might cause a timeout
|
||||
@ -252,12 +259,10 @@ static int write_word (flash_info_t *info, ulong dest, ushort data)
|
||||
reset_timer_masked();
|
||||
|
||||
/* wait while polling the status register */
|
||||
while(((val = *addr) & 0x80) != 0x80)
|
||||
{
|
||||
while(((val = *addr) & 0x80) != 0x80) {
|
||||
if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
|
||||
rc = ERR_TIMOUT;
|
||||
/* suspend program command */
|
||||
*addr = 0xB0;
|
||||
*addr = 0xB0; /* suspend program command */
|
||||
goto outahere;
|
||||
}
|
||||
}
|
||||
@ -285,17 +290,23 @@ static int write_word (flash_info_t *info, ulong dest, ushort data)
|
||||
}
|
||||
|
||||
outahere:
|
||||
/* read array command */
|
||||
*addr = 0xFF;
|
||||
|
||||
if (flag)
|
||||
enable_interrupts();
|
||||
*addr = 0xFF; /* read array command */
|
||||
if (flag) enable_interrupts();
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Copy memory to flash.
|
||||
|
||||
/**
|
||||
* write_buf: - Copy memory to flash.
|
||||
*
|
||||
* @param info:
|
||||
* @param src: source of copy transaction
|
||||
* @param addr: where to copy to
|
||||
* @param cnt: number of bytes to copy
|
||||
*
|
||||
* @return error code
|
||||
*/
|
||||
|
||||
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
|
||||
@ -344,9 +355,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
|
||||
cnt -= 2;
|
||||
}
|
||||
|
||||
if (cnt == 0) {
|
||||
return ERR_OK;
|
||||
}
|
||||
if (cnt == 0) return ERR_OK;
|
||||
|
||||
/*
|
||||
* handle unaligned tail bytes
|
||||
|
||||
@ -17,7 +17,7 @@
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
@ -32,7 +32,7 @@
|
||||
#include <version.h>
|
||||
|
||||
.globl _start
|
||||
_start: b reset
|
||||
_start: b reset
|
||||
ldr pc, _undefined_instruction
|
||||
ldr pc, _software_interrupt
|
||||
ldr pc, _prefetch_abort
|
||||
@ -41,7 +41,7 @@ _start: b reset
|
||||
ldr pc, _irq
|
||||
ldr pc, _fiq
|
||||
|
||||
_undefined_instruction: .word undefined_instruction
|
||||
_undefined_instruction: .word undefined_instruction
|
||||
_software_interrupt: .word software_interrupt
|
||||
_prefetch_abort: .word prefetch_abort
|
||||
_data_abort: .word data_abort
|
||||
@ -112,20 +112,20 @@ FIQ_STACK_START:
|
||||
|
||||
|
||||
/****************************************************************************/
|
||||
/* */
|
||||
/* the actual reset code */
|
||||
/* */
|
||||
/* */
|
||||
/* the actual reset code */
|
||||
/* */
|
||||
/****************************************************************************/
|
||||
|
||||
reset:
|
||||
mrs r0,cpsr /* set the cpu to SVC32 mode */
|
||||
bic r0,r0,#0x1f /* (superviser mode, M=10011) */
|
||||
mrs r0,cpsr /* set the cpu to SVC32 mode */
|
||||
bic r0,r0,#0x1f /* (superviser mode, M=10011) */
|
||||
orr r0,r0,#0x13
|
||||
msr cpsr,r0
|
||||
|
||||
bl cpu_init_crit /* we do sys-critical inits */
|
||||
bl cpu_init_crit /* we do sys-critical inits */
|
||||
|
||||
relocate: /* relocate U-Boot to RAM */
|
||||
relocate: /* relocate U-Boot to RAM */
|
||||
adr r0, _start /* r0 <- current position of code */
|
||||
ldr r2, _armboot_start
|
||||
ldr r3, _armboot_end
|
||||
@ -139,41 +139,47 @@ copy_loop:
|
||||
cmp r0, r2 /* until source end addreee [r2] */
|
||||
ble copy_loop
|
||||
|
||||
/* Set up the stack */
|
||||
/* Set up the stack */
|
||||
ldr r0, _uboot_reloc /* upper 128 KiB: relocated uboot */
|
||||
sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
|
||||
/* FIXME: bdinfo should be here */
|
||||
sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
|
||||
/* FIXME: bdinfo should be here */
|
||||
sub sp, r0, #12 /* leave 3 words for abort-stack */
|
||||
|
||||
ldr pc, _start_armboot
|
||||
|
||||
_start_armboot: .word start_armboot
|
||||
_start_armboot: .word start_armboot
|
||||
|
||||
|
||||
/****************************************************************************/
|
||||
/* */
|
||||
/* CPU_init_critical registers */
|
||||
/* */
|
||||
/* - setup important registers */
|
||||
/* - setup memory timing */
|
||||
/* */
|
||||
/* */
|
||||
/* CPU_init_critical registers */
|
||||
/* */
|
||||
/* - setup important registers */
|
||||
/* - setup memory timing */
|
||||
/* */
|
||||
/****************************************************************************/
|
||||
|
||||
/* Interrupt-Controller base address */
|
||||
/* Interrupt-Controller base address */
|
||||
IC_BASE: .word 0x40d00000
|
||||
#define ICMR 0x04
|
||||
|
||||
/* Reset-Controller */
|
||||
RST_BASE: .word 0x40f00030
|
||||
RST_BASE: .word 0x40f00030
|
||||
#define RCSR 0x00
|
||||
|
||||
/* Operating System Timer */
|
||||
OSTIMER_BASE: .word 0x40a00000
|
||||
#define OSMR3 0x0C
|
||||
#define OSCR 0x10
|
||||
#define OWER 0x18
|
||||
#define OIER 0x1C
|
||||
|
||||
/* Clock Manager Registers */
|
||||
CC_BASE: .word 0x41300000
|
||||
#define CCCR 0x00
|
||||
cpuspeed: .word CFG_CPUSPEED
|
||||
/* Clock Manager Registers */
|
||||
CC_BASE: .word 0x41300000
|
||||
#define CCCR 0x00
|
||||
cpuspeed: .word CFG_CPUSPEED
|
||||
|
||||
/* RS: ??? */
|
||||
/* RS: ??? */
|
||||
.macro CPWAIT
|
||||
mrc p15,0,r0,c2,c0,0
|
||||
mov r0,r0
|
||||
@ -183,7 +189,7 @@ cpuspeed: .word CFG_CPUSPEED
|
||||
|
||||
cpu_init_crit:
|
||||
|
||||
/* mask all IRQs */
|
||||
/* mask all IRQs */
|
||||
ldr r0, IC_BASE
|
||||
mov r1, #0x00
|
||||
str r1, [r0, #ICMR]
|
||||
@ -204,20 +210,20 @@ cpu_init_crit:
|
||||
|
||||
/* Memory interfaces are working. Disable MMU and enable I-cache. */
|
||||
|
||||
ldr r0, =0x2001 /* enable access to all coproc. */
|
||||
ldr r0, =0x2001 /* enable access to all coproc. */
|
||||
mcr p15, 0, r0, c15, c1, 0
|
||||
CPWAIT
|
||||
|
||||
mcr p15, 0, r0, c7, c10, 4 /* drain the write & fill buffers */
|
||||
CPWAIT
|
||||
|
||||
mcr p15, 0, r0, c7, c7, 0 /* flush Icache, Dcache and BTB */
|
||||
mcr p15, 0, r0, c7, c7, 0 /* flush Icache, Dcache and BTB */
|
||||
CPWAIT
|
||||
|
||||
mcr p15, 0, r0, c8, c7, 0 /* flush instuction and data TLBs */
|
||||
CPWAIT
|
||||
|
||||
/* Enable the Icache */
|
||||
/* Enable the Icache */
|
||||
/*
|
||||
mrc p15, 0, r0, c1, c0, 0
|
||||
orr r0, r0, #0x1800
|
||||
@ -228,12 +234,12 @@ cpu_init_crit:
|
||||
|
||||
|
||||
/****************************************************************************/
|
||||
/* */
|
||||
/* Interrupt handling */
|
||||
/* */
|
||||
/* */
|
||||
/* Interrupt handling */
|
||||
/* */
|
||||
/****************************************************************************/
|
||||
|
||||
/* IRQ stack frame */
|
||||
/* IRQ stack frame */
|
||||
|
||||
#define S_FRAME_SIZE 72
|
||||
|
||||
@ -259,38 +265,38 @@ cpu_init_crit:
|
||||
|
||||
#define MODE_SVC 0x13
|
||||
|
||||
/* use bad_save_user_regs for abort/prefetch/undef/swi ... */
|
||||
/* use bad_save_user_regs for abort/prefetch/undef/swi ... */
|
||||
|
||||
.macro bad_save_user_regs
|
||||
sub sp, sp, #S_FRAME_SIZE
|
||||
stmia sp, {r0 - r12} /* Calling r0-r12 */
|
||||
add r8, sp, #S_PC
|
||||
stmia sp, {r0 - r12} /* Calling r0-r12 */
|
||||
add r8, sp, #S_PC
|
||||
|
||||
ldr r2, _armboot_end
|
||||
add r2, r2, #CONFIG_STACKSIZE
|
||||
sub r2, r2, #8
|
||||
ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */
|
||||
add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */
|
||||
ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */
|
||||
add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */
|
||||
|
||||
add r5, sp, #S_SP
|
||||
mov r1, lr
|
||||
stmia r5, {r0 - r4} /* save sp_SVC, lr_SVC, pc, cpsr, old_r */
|
||||
stmia r5, {r0 - r4} /* save sp_SVC, lr_SVC, pc, cpsr, old_r */
|
||||
mov r0, sp
|
||||
.endm
|
||||
|
||||
|
||||
/* use irq_save_user_regs / irq_restore_user_regs for */
|
||||
/* IRQ/FIQ handling */
|
||||
/* use irq_save_user_regs / irq_restore_user_regs for */
|
||||
/* IRQ/FIQ handling */
|
||||
|
||||
.macro irq_save_user_regs
|
||||
sub sp, sp, #S_FRAME_SIZE
|
||||
stmia sp, {r0 - r12} /* Calling r0-r12 */
|
||||
add r8, sp, #S_PC
|
||||
stmdb r8, {sp, lr}^ /* Calling SP, LR */
|
||||
str lr, [r8, #0] /* Save calling PC */
|
||||
mrs r6, spsr
|
||||
str r6, [r8, #4] /* Save CPSR */
|
||||
str r0, [r8, #8] /* Save OLD_R0 */
|
||||
stmia sp, {r0 - r12} /* Calling r0-r12 */
|
||||
add r8, sp, #S_PC
|
||||
stmdb r8, {sp, lr}^ /* Calling SP, LR */
|
||||
str lr, [r8, #0] /* Save calling PC */
|
||||
mrs r6, spsr
|
||||
str r6, [r8, #4] /* Save CPSR */
|
||||
str r0, [r8, #8] /* Save OLD_R0 */
|
||||
mov r0, sp
|
||||
.endm
|
||||
|
||||
@ -309,7 +315,7 @@ cpu_init_crit:
|
||||
|
||||
str lr, [r13] @ save caller lr / spsr
|
||||
mrs lr, spsr
|
||||
str lr, [r13, #4]
|
||||
str lr, [r13, #4]
|
||||
|
||||
mov r13, #MODE_SVC @ prepare SVC-Mode
|
||||
msr spsr_c, r13
|
||||
@ -327,40 +333,40 @@ cpu_init_crit:
|
||||
|
||||
|
||||
/****************************************************************************/
|
||||
/* */
|
||||
/* exception handlers */
|
||||
/* */
|
||||
/* */
|
||||
/* exception handlers */
|
||||
/* */
|
||||
/****************************************************************************/
|
||||
|
||||
.align 5
|
||||
.align 5
|
||||
undefined_instruction:
|
||||
get_bad_stack
|
||||
bad_save_user_regs
|
||||
bl do_undefined_instruction
|
||||
bl do_undefined_instruction
|
||||
|
||||
.align 5
|
||||
software_interrupt:
|
||||
get_bad_stack
|
||||
bad_save_user_regs
|
||||
bl do_software_interrupt
|
||||
bl do_software_interrupt
|
||||
|
||||
.align 5
|
||||
prefetch_abort:
|
||||
get_bad_stack
|
||||
bad_save_user_regs
|
||||
bl do_prefetch_abort
|
||||
bl do_prefetch_abort
|
||||
|
||||
.align 5
|
||||
data_abort:
|
||||
get_bad_stack
|
||||
bad_save_user_regs
|
||||
bl do_data_abort
|
||||
bl do_data_abort
|
||||
|
||||
.align 5
|
||||
not_used:
|
||||
get_bad_stack
|
||||
bad_save_user_regs
|
||||
bl do_not_used
|
||||
bl do_not_used
|
||||
|
||||
#ifdef CONFIG_USE_IRQ
|
||||
|
||||
@ -368,14 +374,14 @@ not_used:
|
||||
irq:
|
||||
get_irq_stack
|
||||
irq_save_user_regs
|
||||
bl do_irq
|
||||
bl do_irq
|
||||
irq_restore_user_regs
|
||||
|
||||
.align 5
|
||||
fiq:
|
||||
get_fiq_stack
|
||||
irq_save_user_regs /* someone ought to write a more */
|
||||
bl do_fiq /* effiction fiq_save_user_regs */
|
||||
bl do_fiq /* effiction fiq_save_user_regs */
|
||||
irq_restore_user_regs
|
||||
|
||||
#else
|
||||
@ -384,28 +390,40 @@ fiq:
|
||||
irq:
|
||||
get_bad_stack
|
||||
bad_save_user_regs
|
||||
bl do_irq
|
||||
bl do_irq
|
||||
|
||||
.align 5
|
||||
fiq:
|
||||
get_bad_stack
|
||||
bad_save_user_regs
|
||||
bl do_fiq
|
||||
bl do_fiq
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
* FIXME How do we reset??? Watchdog timeout??
|
||||
*/
|
||||
/************************************************************************/
|
||||
/* */
|
||||
/* Reset function: the PXA250 has no reset function, so we have to */
|
||||
/* perform a watchdog timeout to cause a reset. */
|
||||
/* */
|
||||
/************************************************************************/
|
||||
.align 5
|
||||
.globl reset_cpu
|
||||
reset_cpu:
|
||||
/*
|
||||
ldr r0, RST_BASE
|
||||
mov r1, #0x0 @ set bit 3-0 ...
|
||||
str r1, [r0, #RCSR] @ ... to clear in RCSR
|
||||
mov r1, #0x1
|
||||
str r1, [r0, #RCSR] @ and perform reset
|
||||
*/
|
||||
b reset_cpu @ silly, but repeat endlessly
|
||||
/* We set OWE:WME (watchdog enable) and wait until timeout happens */
|
||||
|
||||
ldr r0, OSTIMER_BASE
|
||||
ldr r1, [r0, #OWER]
|
||||
orr r1, r1, #0x0001 /* bit0: WME */
|
||||
str r1, [r0, #OWER]
|
||||
|
||||
/* OS timer does only wrap every 1165 seconds, so we have to set */
|
||||
/* the match register as well. */
|
||||
|
||||
ldr r1, [r0, #OSCR] /* read OS timer */
|
||||
add r1, r1, #0x800 /* let OSMR3 match after */
|
||||
add r1, r1, #0x800 /* 4096*(1/3.6864MHz)=1ms */
|
||||
str r1, [r0, #OSMR3]
|
||||
|
||||
reset_endless:
|
||||
|
||||
b reset_endless
|
||||
|
||||
@ -709,11 +709,11 @@ typedef struct scc_enet {
|
||||
|
||||
#endif /* CONFIG_FADS860T */
|
||||
|
||||
/*** FPS850L *********************************************************/
|
||||
/*** FPS850L, FPS860L ************************************************/
|
||||
|
||||
#ifdef CONFIG_FPS850L
|
||||
#if defined(CONFIG_FPS850L) || defined(CONFIG_FPS860L)
|
||||
/* Bits in parallel I/O port registers that have to be set/cleared
|
||||
* to configure the pins for SCC1 use.
|
||||
* to configure the pins for SCC2 use.
|
||||
*/
|
||||
#define PROFF_ENET PROFF_SCC2
|
||||
#define CPM_CR_ENET CPM_CR_CH_SCC2
|
||||
@ -732,7 +732,7 @@ typedef struct scc_enet {
|
||||
*/
|
||||
#define SICR_ENET_MASK ((uint)0x0000ff00)
|
||||
#define SICR_ENET_CLKRT ((uint)0x00002600)
|
||||
#endif /* CONFIG_FPS850L */
|
||||
#endif /* CONFIG_FPS850L, CONFIG_FPS860L */
|
||||
|
||||
/*** GEN860T **********************************************************/
|
||||
#if defined(CONFIG_GEN860T)
|
||||
|
||||
331
include/configs/FPS860L.h
Normal file
331
include/configs/FPS860L.h
Normal file
@ -0,0 +1,331 @@
|
||||
/*
|
||||
* (C) Copyright 2000
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
* board/config.h - configuration options, board specific
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
* (easy to change)
|
||||
*/
|
||||
|
||||
#define CONFIG_MPC860 1 /* This is a MPC860 CPU */
|
||||
#define CONFIG_FPS860L 1 /* ...on a FingerPrint Sensor */
|
||||
|
||||
#undef CONFIG_8xx_CONS_SMC1
|
||||
#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
|
||||
#undef CONFIG_8xx_CONS_NONE
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#if 0
|
||||
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
|
||||
#else
|
||||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
||||
#endif
|
||||
#define CONFIG_BOOTCOMMAND "bootm 40040000" /* autoboot command */
|
||||
|
||||
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
|
||||
|
||||
#define CONFIG_BOARD_TYPES 1 /* support board types */
|
||||
|
||||
#define CONFIG_BOOTARGS "root=/dev/nfs rw " \
|
||||
"nfsroot=10.0.0.2:/opt/eldk/ppc_8xx " \
|
||||
"nfsaddrs=10.0.0.99:10.0.0.2"
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL
|
||||
|
||||
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
|
||||
|
||||
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
|
||||
CFG_CMD_ASKENV | \
|
||||
CFG_CMD_DHCP | \
|
||||
CFG_CMD_DATE )
|
||||
|
||||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
|
||||
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
||||
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
|
||||
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
||||
|
||||
/*
|
||||
* Low Level Configuration Settings
|
||||
* (address mappings, register initial values, etc.)
|
||||
* You should know what you are doing if you make changes here.
|
||||
*/
|
||||
/*-----------------------------------------------------------------------
|
||||
* Internal Memory Mapped Register
|
||||
*/
|
||||
#define CFG_IMMR 0xFFF00000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Definitions for initial stack pointer and data area (in DPRAM)
|
||||
*/
|
||||
#define CFG_INIT_RAM_ADDR CFG_IMMR
|
||||
#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
|
||||
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Start addresses for the final memory configuration
|
||||
* (Set up by the startup code)
|
||||
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
||||
*/
|
||||
#define CFG_SDRAM_BASE 0x00000000
|
||||
#define CFG_FLASH_BASE 0x40000000
|
||||
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
||||
#define CFG_MONITOR_BASE CFG_FLASH_BASE
|
||||
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH organization
|
||||
*/
|
||||
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
|
||||
#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
|
||||
|
||||
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
||||
|
||||
#define CFG_ENV_IS_IN_FLASH 1
|
||||
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
|
||||
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
|
||||
|
||||
/* Address and size of Redundant Environment Sector */
|
||||
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
|
||||
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Hardware Information Block
|
||||
*/
|
||||
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
|
||||
#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
|
||||
#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Cache Configuration
|
||||
*/
|
||||
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SYPCR - System Protection Control 11-9
|
||||
* SYPCR can only be written once after reset!
|
||||
*-----------------------------------------------------------------------
|
||||
* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
|
||||
*/
|
||||
#if defined(CONFIG_WATCHDOG)
|
||||
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
|
||||
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
|
||||
#else
|
||||
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SIUMCR - SIU Module Configuration 11-6
|
||||
*-----------------------------------------------------------------------
|
||||
* PCMCIA config., multi-function pin tri-state
|
||||
*/
|
||||
#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* TBSCR - Time Base Status and Control 11-26
|
||||
*-----------------------------------------------------------------------
|
||||
* Clear Reference Interrupt Status, Timebase freezing enabled
|
||||
*/
|
||||
#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* RTCSC - Real-Time Clock Status and Control Register 11-27
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PISCR - Periodic Interrupt Status and Control 11-31
|
||||
*-----------------------------------------------------------------------
|
||||
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
|
||||
*/
|
||||
#define CFG_PISCR (PISCR_PS | PISCR_PITF)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
|
||||
*-----------------------------------------------------------------------
|
||||
* Reset PLL lock status sticky bit, timer expired status bit and timer
|
||||
* interrupt status bit - leave PLL multiplication factor unchanged !
|
||||
*/
|
||||
#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SCCR - System Clock and reset Control Register 15-27
|
||||
*-----------------------------------------------------------------------
|
||||
* Set clock output, timebase and RTC source and divider,
|
||||
* power management and some other internal clocks
|
||||
*/
|
||||
#define SCCR_MASK SCCR_EBDF11
|
||||
#define CFG_SCCR (SCCR_TBS | \
|
||||
SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
|
||||
SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
|
||||
SCCR_DFALCD00)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PCMCIA stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*
|
||||
*/
|
||||
#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
|
||||
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
|
||||
#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
|
||||
#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
|
||||
#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
|
||||
#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
|
||||
#define CFG_PCMCIA_IO_ADDR (0xEC000000)
|
||||
#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*
|
||||
*-----------------------------------------------------------------------
|
||||
*
|
||||
*/
|
||||
/*#define CFG_DER 0x2002000F*/
|
||||
#define CFG_DER 0
|
||||
|
||||
/*
|
||||
* Init Memory Controller:
|
||||
*
|
||||
* BR0/1 and OR0/1 (FLASH)
|
||||
*/
|
||||
|
||||
#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
|
||||
#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
|
||||
|
||||
/* used to re-map FLASH both when starting from SRAM or FLASH:
|
||||
* restrict access enough to keep SRAM working (if any)
|
||||
* but not too much to meddle with FLASH accesses
|
||||
*/
|
||||
#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
|
||||
#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
|
||||
|
||||
/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
|
||||
#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
|
||||
OR_SCY_5_CLK | OR_EHTR)
|
||||
|
||||
#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
|
||||
#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
|
||||
#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
|
||||
|
||||
#define CFG_OR1_REMAP CFG_OR0_REMAP
|
||||
#define CFG_OR1_PRELIM CFG_OR0_PRELIM
|
||||
#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
|
||||
|
||||
/*
|
||||
* BR2/3 and OR2/3 (SDRAM)
|
||||
*
|
||||
*/
|
||||
#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
|
||||
#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
|
||||
#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
|
||||
|
||||
/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
|
||||
#define CFG_OR_TIMING_SDRAM 0x00000A00
|
||||
|
||||
#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
|
||||
#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
|
||||
|
||||
#define CFG_OR3_PRELIM CFG_OR2_PRELIM
|
||||
#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
|
||||
|
||||
/*
|
||||
* Memory Periodic Timer Prescaler
|
||||
*/
|
||||
|
||||
/* periodic timer for refresh */
|
||||
#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
|
||||
|
||||
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
|
||||
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
|
||||
#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
|
||||
|
||||
/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
|
||||
#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
|
||||
#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
|
||||
|
||||
/*
|
||||
* MAMR settings for SDRAM
|
||||
*/
|
||||
|
||||
/* 8 column SDRAM */
|
||||
#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
|
||||
MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
|
||||
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
|
||||
/* 9 column SDRAM */
|
||||
#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
|
||||
MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
|
||||
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
|
||||
|
||||
|
||||
/*
|
||||
* Internal Definitions
|
||||
*
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
@ -74,6 +74,7 @@
|
||||
#define CONFIG_IPADDR 192.168.1.56
|
||||
#define CONFIG_SERVERIP 192.168.1.2
|
||||
#define CONFIG_BOOTCOMMAND "bootm 0x40000"
|
||||
#define CONFIG_SHOW_BOOT_PROGRESS
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
||||
@ -156,7 +157,7 @@
|
||||
#define CFG_GPCR0_VAL 0x08022080
|
||||
#define CFG_GPCR1_VAL 0x00000000
|
||||
#define CFG_GPCR2_VAL 0x00000000
|
||||
#define CFG_GPDR0_VAL 0xCD82A858
|
||||
#define CFG_GPDR0_VAL 0xCD82A878
|
||||
#define CFG_GPDR1_VAL 0xFCFFAB80
|
||||
#define CFG_GPDR2_VAL 0x0001FFFF
|
||||
#define CFG_GAFR0_L_VAL 0x80000000
|
||||
@ -191,10 +192,10 @@
|
||||
#define CFG_MCIO0_VAL 0x00000000
|
||||
#define CFG_MCIO1_VAL 0x00000000
|
||||
|
||||
/*
|
||||
#define _LED 0x08000010
|
||||
#define LED_BLANK (0x08000040)
|
||||
*/
|
||||
#define CSB226_USER_LED0 0x00000008
|
||||
#define CSB226_USER_LED1 0x00000010
|
||||
#define CSB226_USER_LED2 0x00000020
|
||||
|
||||
|
||||
/*
|
||||
* FLASH and environment organization
|
||||
|
||||
@ -56,6 +56,13 @@ static void setup_videolfb_tag(gd_t *gd);
|
||||
static struct tag *params;
|
||||
#endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */
|
||||
|
||||
#ifdef CONFIG_SHOW_BOOT_PROGRESS
|
||||
# include <status_led.h>
|
||||
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
|
||||
#else
|
||||
# define SHOW_BOOT_PROGRESS(arg)
|
||||
#endif
|
||||
|
||||
extern image_header_t header; /* from cmd_bootm.c */
|
||||
|
||||
|
||||
@ -80,6 +87,8 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
|
||||
* Check if there is an initrd image
|
||||
*/
|
||||
if (argc >= 3) {
|
||||
SHOW_BOOT_PROGRESS (9);
|
||||
|
||||
addr = simple_strtoul(argv[2], NULL, 16);
|
||||
|
||||
printf ("## Loading Ramdisk Image at %08lx ...\n", addr);
|
||||
@ -89,6 +98,7 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
|
||||
|
||||
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
|
||||
printf ("Bad Magic Number\n");
|
||||
SHOW_BOOT_PROGRESS (-10);
|
||||
do_reset (cmdtp, flag, argc, argv);
|
||||
}
|
||||
|
||||
@ -100,9 +110,12 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
|
||||
|
||||
if (crc32 (0, (char *)data, len) != checksum) {
|
||||
printf ("Bad Header Checksum\n");
|
||||
SHOW_BOOT_PROGRESS (-11);
|
||||
do_reset (cmdtp, flag, argc, argv);
|
||||
}
|
||||
|
||||
SHOW_BOOT_PROGRESS (10);
|
||||
|
||||
print_image_hdr (hdr);
|
||||
|
||||
data = addr + sizeof(image_header_t);
|
||||
@ -115,15 +128,19 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
|
||||
csum = crc32 (0, (char *)data, len);
|
||||
if (csum != ntohl(hdr->ih_dcrc)) {
|
||||
printf ("Bad Data CRC\n");
|
||||
SHOW_BOOT_PROGRESS (-12);
|
||||
do_reset (cmdtp, flag, argc, argv);
|
||||
}
|
||||
printf ("OK\n");
|
||||
}
|
||||
|
||||
SHOW_BOOT_PROGRESS (11);
|
||||
|
||||
if ((hdr->ih_os != IH_OS_LINUX) ||
|
||||
(hdr->ih_arch != IH_CPU_ARM) ||
|
||||
(hdr->ih_type != IH_TYPE_RAMDISK) ) {
|
||||
printf ("No Linux ARM Ramdisk Image\n");
|
||||
SHOW_BOOT_PROGRESS (-13);
|
||||
do_reset (cmdtp, flag, argc, argv);
|
||||
}
|
||||
|
||||
@ -134,6 +151,8 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
|
||||
ulong tail = ntohl(len_ptr[0]) % 4;
|
||||
int i;
|
||||
|
||||
SHOW_BOOT_PROGRESS (13);
|
||||
|
||||
/* skip kernel length and terminator */
|
||||
data = (ulong)(&len_ptr[2]);
|
||||
/* skip any additional image length fields */
|
||||
@ -151,6 +170,8 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
|
||||
/*
|
||||
* no initrd image
|
||||
*/
|
||||
SHOW_BOOT_PROGRESS (14);
|
||||
|
||||
data = 0;
|
||||
}
|
||||
|
||||
@ -168,6 +189,8 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
|
||||
initrd_end = 0;
|
||||
}
|
||||
|
||||
SHOW_BOOT_PROGRESS (15);
|
||||
|
||||
#ifdef DEBUG
|
||||
printf ("## Transferring control to Linux (at address %08lx) ...\n",
|
||||
(ulong)theKernel);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user