Merge Sequoia beautification into Korat code
Signed-off-by: Larry Johnson <lrj@acm.org>
This commit is contained in:
Larry Johnson
Stefan Roese
parent
ba52be3d0e
commit
3259eeaa41
@ -2,12 +2,12 @@
|
||||
* (C) Copyright 2007-2008
|
||||
* Larry Johnson, lrj@acm.org
|
||||
*
|
||||
* (C) Copyright 2006
|
||||
* (C) Copyright 2006-2008
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* (C) Copyright 2006
|
||||
* Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
|
||||
* Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
|
||||
* Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
@ -26,15 +26,16 @@
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm-ppc/io.h>
|
||||
#include <i2c.h>
|
||||
#include <ppc440.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/bitops.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
||||
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
||||
|
||||
ulong flash_get_size(ulong base, int banknum);
|
||||
|
||||
@ -47,9 +48,9 @@ int board_early_init_f(void)
|
||||
mtdcr(ebccfga, xbcfg);
|
||||
mtdcr(ebccfgd, 0xb8400000);
|
||||
|
||||
/*--------------------------------------------------------------------
|
||||
/*
|
||||
* Setup the interrupt controller polarities, triggers, etc.
|
||||
*-------------------------------------------------------------------*/
|
||||
*/
|
||||
mtdcr(uic0sr, 0xffffffff); /* clear all */
|
||||
mtdcr(uic0er, 0x00000000); /* disable all */
|
||||
mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
|
||||
@ -101,10 +102,10 @@ int board_early_init_f(void)
|
||||
/* select Ethernet pins */
|
||||
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
||||
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
|
||||
SDR0_PFC1_SELECT_CONFIG_4;
|
||||
SDR0_PFC1_SELECT_CONFIG_4;
|
||||
mfsdr(SDR0_PFC2, sdr0_pfc2);
|
||||
sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
|
||||
SDR0_PFC2_SELECT_CONFIG_4;
|
||||
SDR0_PFC2_SELECT_CONFIG_4;
|
||||
mtsdr(SDR0_PFC2, sdr0_pfc2);
|
||||
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
||||
|
||||
@ -221,9 +222,6 @@ static void set_mac_addresses(void)
|
||||
}
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------+
|
||||
| misc_init_r.
|
||||
+---------------------------------------------------------------------------*/
|
||||
int misc_init_r(void)
|
||||
{
|
||||
uint pbcr;
|
||||
@ -234,11 +232,7 @@ int misc_init_r(void)
|
||||
unsigned long sdr0_pfc1;
|
||||
char *act = getenv("usbact");
|
||||
|
||||
/*
|
||||
* FLASH stuff...
|
||||
*/
|
||||
|
||||
/* Re-do sizing to get full correct info */
|
||||
/* Re-do flash sizing to get full correct info */
|
||||
|
||||
/* adjust flash start and offset */
|
||||
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
|
||||
@ -246,32 +240,7 @@ int misc_init_r(void)
|
||||
|
||||
mtdcr(ebccfga, pb0cr);
|
||||
pbcr = mfdcr(ebccfgd);
|
||||
switch (gd->bd->bi_flashsize) {
|
||||
case 1 << 20:
|
||||
size_val = 0;
|
||||
break;
|
||||
case 2 << 20:
|
||||
size_val = 1;
|
||||
break;
|
||||
case 4 << 20:
|
||||
size_val = 2;
|
||||
break;
|
||||
case 8 << 20:
|
||||
size_val = 3;
|
||||
break;
|
||||
case 16 << 20:
|
||||
size_val = 4;
|
||||
break;
|
||||
case 32 << 20:
|
||||
size_val = 5;
|
||||
break;
|
||||
case 64 << 20:
|
||||
size_val = 6;
|
||||
break;
|
||||
case 128 << 20:
|
||||
size_val = 7;
|
||||
break;
|
||||
}
|
||||
size_val = ffs(gd->bd->bi_flashsize) - 21;
|
||||
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
|
||||
mtdcr(ebccfga, pb0cr);
|
||||
mtdcr(ebccfgd, pbcr);
|
||||
@ -286,8 +255,7 @@ int misc_init_r(void)
|
||||
&flash_info[0]);
|
||||
|
||||
/* Env protection ON by default */
|
||||
(void)flash_protect(FLAG_PROTECT_SET,
|
||||
CFG_ENV_ADDR_REDUND,
|
||||
(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
|
||||
CFG_ENV_ADDR_REDUND + 2 * CFG_ENV_SECT_SIZE - 1,
|
||||
&flash_info[0]);
|
||||
|
||||
@ -301,35 +269,40 @@ int misc_init_r(void)
|
||||
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
||||
mfsdr(SDR0_USB2H0CR, usb2h0cr);
|
||||
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0 */
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1 */
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0 */
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1 */
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1 */
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
|
||||
|
||||
/* An 8-bit/60MHz interface is the only possible alternative
|
||||
when connecting the Device to the PHY */
|
||||
usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
|
||||
usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1 */
|
||||
/*
|
||||
* An 8-bit/60MHz interface is the only possible alternative
|
||||
* when connecting the Device to the PHY
|
||||
*/
|
||||
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
|
||||
usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
|
||||
|
||||
/* To enable the USB 2.0 Device function through the UTMI interface */
|
||||
usb2d0cr = usb2d0cr & ~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
|
||||
usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; /*1 */
|
||||
/*
|
||||
* To enable the USB 2.0 Device function
|
||||
* through the UTMI interface
|
||||
*/
|
||||
usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
|
||||
usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;
|
||||
|
||||
sdr0_pfc1 = sdr0_pfc1 & ~SDR0_PFC1_UES_MASK;
|
||||
sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0 */
|
||||
sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
|
||||
sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;
|
||||
|
||||
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
||||
mtsdr(SDR0_USB2D0CR, usb2d0cr);
|
||||
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
||||
mtsdr(SDR0_USB2H0CR, usb2h0cr);
|
||||
|
||||
/*clear resets */
|
||||
/* clear resets */
|
||||
udelay(1000);
|
||||
mtsdr(SDR0_SRST1, 0x00000000);
|
||||
udelay(1000);
|
||||
@ -341,14 +314,14 @@ int misc_init_r(void)
|
||||
/*-------------------PATCH-------------------------------*/
|
||||
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
||||
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0 */
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0 */
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1 */
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1 */
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
|
||||
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
||||
|
||||
udelay(1000);
|
||||
@ -372,32 +345,32 @@ int misc_init_r(void)
|
||||
mfsdr(SDR0_USB2D0CR, usb2d0cr);
|
||||
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
||||
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0 */
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0 */
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1 */
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0 */
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0 */
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;
|
||||
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;
|
||||
|
||||
usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
|
||||
usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0 */
|
||||
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
|
||||
usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;
|
||||
|
||||
usb2d0cr = usb2d0cr & ~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
|
||||
usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; /*0 */
|
||||
usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
|
||||
usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;
|
||||
|
||||
sdr0_pfc1 = sdr0_pfc1 & ~SDR0_PFC1_UES_MASK;
|
||||
sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1 */
|
||||
sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
|
||||
sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
|
||||
|
||||
mtsdr(SDR0_USB2H0CR, usb2h0cr);
|
||||
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
||||
mtsdr(SDR0_USB2D0CR, usb2d0cr);
|
||||
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
||||
|
||||
/*clear resets */
|
||||
/* clear resets */
|
||||
udelay(1000);
|
||||
mtsdr(SDR0_SRST1, 0x00000000);
|
||||
udelay(1000);
|
||||
@ -406,7 +379,7 @@ int misc_init_r(void)
|
||||
printf("USB: Device(int phy)\n");
|
||||
}
|
||||
|
||||
mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */
|
||||
mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */
|
||||
reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0);
|
||||
mtsdr(SDR0_SRST1, reg);
|
||||
|
||||
@ -486,43 +459,42 @@ int testdram(void)
|
||||
}
|
||||
#endif /* defined(CFG_DRAM_TEST) */
|
||||
|
||||
/*************************************************************************
|
||||
* pci_pre_init
|
||||
/*
|
||||
* pci_pre_init
|
||||
*
|
||||
* This routine is called just prior to registering the hose and gives
|
||||
* the board the opportunity to check things. Returning a value of zero
|
||||
* indicates that things are bad & PCI initialization should be aborted.
|
||||
* This routine is called just prior to registering the hose and gives
|
||||
* the board the opportunity to check things. Returning a value of zero
|
||||
* indicates that things are bad & PCI initialization should be aborted.
|
||||
*
|
||||
* Different boards may wish to customize the pci controller structure
|
||||
* (add regions, override default access routines, etc) or perform
|
||||
* certain pre-initialization actions.
|
||||
*
|
||||
************************************************************************/
|
||||
* Different boards may wish to customize the pci controller structure
|
||||
* (add regions, override default access routines, etc) or perform
|
||||
* certain pre-initialization actions.
|
||||
*/
|
||||
#if defined(CONFIG_PCI)
|
||||
int pci_pre_init(struct pci_controller *hose)
|
||||
{
|
||||
unsigned long addr;
|
||||
|
||||
/*-------------------------------------------------------------------------+
|
||||
| Set priority for all PLB3 devices to 0.
|
||||
| Set PLB3 arbiter to fair mode.
|
||||
+-------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Set priority for all PLB3 devices to 0.
|
||||
* Set PLB3 arbiter to fair mode.
|
||||
*/
|
||||
mfsdr(sdr_amp1, addr);
|
||||
mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
|
||||
addr = mfdcr(plb3_acr);
|
||||
mtdcr(plb3_acr, addr | 0x80000000);
|
||||
|
||||
/*-------------------------------------------------------------------------+
|
||||
| Set priority for all PLB4 devices to 0.
|
||||
+-------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Set priority for all PLB4 devices to 0.
|
||||
*/
|
||||
mfsdr(sdr_amp0, addr);
|
||||
mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
|
||||
addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
|
||||
mtdcr(plb4_acr, addr);
|
||||
|
||||
/*-------------------------------------------------------------------------+
|
||||
| Set Nebula PLB4 arbiter to fair mode.
|
||||
+-------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Set Nebula PLB4 arbiter to fair mode.
|
||||
*/
|
||||
/* Segment0 */
|
||||
addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
|
||||
addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
|
||||
@ -541,47 +513,51 @@ int pci_pre_init(struct pci_controller *hose)
|
||||
}
|
||||
#endif /* defined(CONFIG_PCI) */
|
||||
|
||||
/*************************************************************************
|
||||
* pci_target_init
|
||||
/*
|
||||
* pci_target_init
|
||||
*
|
||||
* The bootstrap configuration provides default settings for the pci
|
||||
* inbound map (PIM). But the bootstrap config choices are limited and
|
||||
* may not be sufficient for a given board.
|
||||
*
|
||||
************************************************************************/
|
||||
* The bootstrap configuration provides default settings for the pci
|
||||
* inbound map (PIM). But the bootstrap config choices are limited and
|
||||
* may not be sufficient for a given board.
|
||||
*/
|
||||
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
|
||||
void pci_target_init(struct pci_controller *hose)
|
||||
{
|
||||
/*--------------------------------------------------------------------------+
|
||||
/*
|
||||
* Set up Direct MMIO registers
|
||||
*--------------------------------------------------------------------------*/
|
||||
/*--------------------------------------------------------------------------+
|
||||
| PowerPC440EPX PCI Master configuration.
|
||||
| Map one 1Gig range of PLB/processor addresses to PCI memory space.
|
||||
| PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
|
||||
| Use byte reversed out routines to handle endianess.
|
||||
| Make this region non-prefetchable.
|
||||
+--------------------------------------------------------------------------*/
|
||||
out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
|
||||
*/
|
||||
/*
|
||||
* PowerPC440EPX PCI Master configuration.
|
||||
* Map one 1Gig range of PLB/processor addresses to PCI memory space.
|
||||
* PLB address 0xA0000000-0xDFFFFFFF
|
||||
* ==> PCI address 0xA0000000-0xDFFFFFFF
|
||||
* Use byte reversed out routines to handle endianess.
|
||||
* Make this region non-prefetchable.
|
||||
*/
|
||||
out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */
|
||||
/* - disabled b4 setting */
|
||||
out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
|
||||
out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
|
||||
out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
|
||||
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
|
||||
out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
|
||||
out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */
|
||||
/* and enable region */
|
||||
|
||||
out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
|
||||
out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
|
||||
out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
|
||||
out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */
|
||||
/* - disabled b4 setting */
|
||||
out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
|
||||
out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
|
||||
out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
|
||||
out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
|
||||
out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */
|
||||
/* and enable region */
|
||||
|
||||
out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
|
||||
out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
|
||||
out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
|
||||
out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
|
||||
out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
|
||||
out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
|
||||
out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
|
||||
|
||||
/*--------------------------------------------------------------------------+
|
||||
/*
|
||||
* Set up Configuration registers
|
||||
*--------------------------------------------------------------------------*/
|
||||
*/
|
||||
|
||||
/* Program the board's subsystem id/vendor id */
|
||||
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
|
||||
@ -599,27 +575,24 @@ void pci_target_init(struct pci_controller *hose)
|
||||
|
||||
pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
|
||||
|
||||
/*--------------------------------------------------------------------------+
|
||||
* Set up Configuration registers for on-board NEC uPD720101 USB controller
|
||||
*--------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Set up Configuration registers for on-board NEC uPD720101 USB
|
||||
* controller.
|
||||
*/
|
||||
pci_write_config_dword(PCI_BDF(0x0, 0xC, 0x0), 0xE4, 0x00000020);
|
||||
}
|
||||
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
|
||||
|
||||
/*************************************************************************
|
||||
* pci_master_init
|
||||
*
|
||||
************************************************************************/
|
||||
#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
|
||||
void pci_master_init(struct pci_controller *hose)
|
||||
{
|
||||
unsigned short temp_short;
|
||||
|
||||
/*--------------------------------------------------------------------------+
|
||||
| Write the PowerPC440 EP PCI Configuration regs.
|
||||
| Enable PowerPC440 EP to be a master on the PCI bus (PMM).
|
||||
| Enable PowerPC440 EP to act as a PCI memory target (PTM).
|
||||
+--------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Write the PowerPC440 EP PCI Configuration regs.
|
||||
* Enable PowerPC440 EP to be a master on the PCI bus (PMM).
|
||||
* Enable PowerPC440 EP to act as a PCI memory target (PTM).
|
||||
*/
|
||||
pci_read_config_word(0, PCI_COMMAND, &temp_short);
|
||||
pci_write_config_word(0, PCI_COMMAND,
|
||||
temp_short | PCI_COMMAND_MASTER |
|
||||
@ -627,28 +600,26 @@ void pci_master_init(struct pci_controller *hose)
|
||||
}
|
||||
#endif
|
||||
|
||||
/*************************************************************************
|
||||
* is_pci_host
|
||||
/*
|
||||
* is_pci_host
|
||||
*
|
||||
* This routine is called to determine if a pci scan should be
|
||||
* performed. With various hardware environments (especially cPCI and
|
||||
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
||||
* bit in the strap register, or generic host/adapter assumptions.
|
||||
* This routine is called to determine if a pci scan should be
|
||||
* performed. With various hardware environments (especially cPCI and
|
||||
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
||||
* bit in the strap register, or generic host/adapter assumptions.
|
||||
*
|
||||
* Rather than hard-code a bad assumption in the general 440 code, the
|
||||
* 440 pci code requires the board to decide at runtime.
|
||||
* Rather than hard-code a bad assumption in the general 440 code, the
|
||||
* 440 pci code requires the board to decide at runtime.
|
||||
*
|
||||
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
||||
*
|
||||
*
|
||||
************************************************************************/
|
||||
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
||||
*/
|
||||
#if defined(CONFIG_PCI)
|
||||
int is_pci_host(struct pci_controller *hose)
|
||||
{
|
||||
/* Korat is always configured as host. */
|
||||
return (1);
|
||||
}
|
||||
#endif
|
||||
#endif /* defined(CONFIG_PCI) */
|
||||
|
||||
#if defined(CONFIG_POST)
|
||||
/*
|
||||
@ -657,6 +628,6 @@ int is_pci_host(struct pci_controller *hose)
|
||||
*/
|
||||
int post_hotkeys_pressed(void)
|
||||
{
|
||||
return 0; /* No hotkeys supported */
|
||||
return 0; /* No hotkeys supported */
|
||||
}
|
||||
#endif
|
||||
#endif /* CONFIG_POST */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user