leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge http://www.denx.de/git/u-boot

Browse Source
This commit is contained in:
Kim Phillips 2006-11-28 23:35:49 -06:00
commit 32081125a0
45 changed files with 2369 additions and 220 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

190
CHANGELOG
View File

@ -1,3 +1,193 @@
commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Mon Nov 27 22:53:53 2006 +0100
Update CHANGELOG
commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
Author: Stefan Roese <sr@denx.de>
Date: Mon Nov 27 17:43:25 2006 +0100
[PATCH] 4xx_enet.c: Correct the setting of zmiifer register
Patch below corrects the setting of the zmiifer register, it was
overwritting the register rather than ORing the settings.
Signed-off-by: Neil Wilson <NWilson@airspan.com>
Signed-off-by: Stefan Roese <sr@denx.de>
commit d1a72545296800b7e219f93104ad5836f0003d66
Author: Stefan Roese <sr@denx.de>
Date: Mon Nov 27 17:34:10 2006 +0100
[PATCH] Select NAND embedded environment from board configuration
The current NAND Bootloader setup forces the environment
variables to be in line with the bootloader. This change
enables the configuration to be made in the board include
file instead so that it can be individually enabled.
Signed-off-by: Nick Spence <nick.spence@freescale.com>
Signed-off-by: Stefan Roese <sr@denx.de>
commit 15784862857c3c2214498defcfed84ff137fb81e
Author: Stefan Roese <sr@denx.de>
Date: Mon Nov 27 17:22:19 2006 +0100
[PATCH] nand_wait() timeout fixes
Two fixes for the nand_wait() function in
drivers/nand/nand_base.c:
1. Use correct timeouts. The original timeouts in Linux
source are 400ms and 20ms not 40s and 20s
2. Return correct error value in case of timeout. 0 is
interpreted as OK.
Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
Signed-off-by: Stefan Roese <sr@denx.de>
commit da5553b095bf04f4f109ad7e565dae3aba47b230
Author: Stefan Roese <sr@denx.de>
Date: Mon Nov 27 17:04:06 2006 +0100
[PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
arguments to bootm. It removes the getenv("disable_of") test that used
to be used for this purpose.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jon Loeliger <jdl@freescale.com>
commit a9398e018593782c5fa7d0741955fc1256b34c1e
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Mon Nov 27 15:32:42 2006 +0100
Minor code cleanup. Update CHANGELOG.
commit 78d620ebb5871d252270dedfad60c6568993b780
Author: Wolfgang Denk <wd@atlas.denx.de>
Date: Thu Nov 23 22:58:58 2006 +0100
Updates for TQM5200 modules:
- fix off-by-one error in board/tqm5200/cam5200_flash.c error message
- simplify "udate" definitions
commit 2053283304eeddf250d109e6791eb6fa4cad14f7
Author: Stefan Roese <sr@denx.de>
Date: Wed Nov 22 13:20:50 2006 +0100
[PATCH] PPC4xx start.S: Fix for processor errata
Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
errata 1.12: 440_33 by moving patch up in code.
Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
Signed-off-by: Stefan Roese <sr@denx.de>
commit 4ef6251403f637841000e0fef9e832aa01339822
Author: Stefan Roese <sr@denx.de>
Date: Mon Nov 20 20:39:52 2006 +0100
[PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
Signed-off-by: Stefan Roese <sr@denx.de>
commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Mon Nov 20 10:28:30 2006 +0100
Update CHANGELOG
commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
Author: Stefan Roese <sr@denx.de>
Date: Mon Nov 13 13:55:24 2006 +0100
[PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
* Adds support for AMD command set Top Boot flash geometry reversal
* Adds support for reading JEDEC Manufacturer ID and Device ID
* Adds support for displaying command set, manufacturer id and
device ids (flinfo)
* Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
* Removes outdated change history (refer to git log instead)
Signed-off-by: Tolunay Orkun <listmember@orkun.us>
Signed-off-by: Stefan Roese <sr@denx.de>
commit b21b511d4c50408f4853f46f06b601272196223f
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Sun Nov 12 21:13:23 2006 +0100
Update CHANGELOG
commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Sat Nov 11 22:48:22 2006 +0100
Disable the watchdog in the default config for the V38B board.
commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Sat Nov 11 22:43:00 2006 +0100
Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
group is enabled for USB earlier (in cpu_init_f() instead of
usb_lowlevel_init()).
commit 91650b3e4de688038d4f71279c44858e3e2c6870
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Mon Nov 6 17:06:36 2006 +0100
Sequential accesses to non-existent memory must be synchronized,
at least on G2 cores.
This fixes get_ram_size() problems on MPC5200 Rev. B boards.
commit c59200443072353044aa4bf737a5a60f9a9af231
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Thu Nov 2 15:15:01 2006 +0100
Release U-Boot 1.1.6
commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Wed Nov 1 02:04:38 2006 +0100
Finish up support for MarelV38B board
- add watchdog support
- enable GPIO_WKUP_7 pin for input
- code cleanup
commit ffa150bc90c943ca265170bd1be3f293674dd5c7
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Wed Nov 1 01:45:46 2006 +0100
- Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
* remove warnings when compiling ethaddr.c
* adjust linker script (fixes a crash resulting from incorrect
definition of __u_boot_cmd_start)
- Some MarelV38B code cleanup.
commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Wed Nov 1 01:38:16 2006 +0100
- Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
MPC5XXX_WU_GPIO_DATA_O for affected boards.
- Add defintions for some MPC5XXX GPIO pins.
commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Wed Nov 1 01:34:29 2006 +0100
Changed MarelV38B board make target to lowercase. Config file cleanup.
commit 1954be6e9c9421b45d0a9d05b10356acc7563150
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Sun Oct 29 01:03:51 2006 +0200

1
MAINTAINERS
View File

@ -281,6 +281,7 @@ Stefan Roese <sr@denx.de>
TQM85xx MPC8540/8541/8555/8560
alpr PPC440GX
bamboo PPC440EP
bunbinga PPC405EP
ebony PPC440GP

30
MAKEALL
View File

@ -74,21 +74,21 @@ LIST_8xx=" \
#########################################################################
LIST_4xx=" \
ADCIOP AP1000 AR405 ASH405 \
bamboo bubinga CANBT CMS700 \
CPCI2DP CPCI405 CPCI4052 CPCI405AB \
CPCI405DT CPCI440 CPCIISER4 CRAYL1 \
csb272 csb472 DASA_SIM DP405 \
DU405 ebony ERIC EXBITGEN \
G2000 HH405 HUB405 JSE \
KAREF luan METROBOX MIP405 \
MIP405T ML2 ml300 ocotea \
OCRTC ORSG p3p440 PCI405 \
pcs440ep PIP405 PLU405 PMC405 \
PPChameleonEVB sbc405 sequoia sequoia_nand \
VOH405 VOM405 W7OLMC W7OLMG \
walnut WUH405 XPEDITE1K yellowstone \
yosemite yucca bamboo \
ADCIOP alpr AP1000 AR405 \
ASH405 bamboo bubinga CANBT \
CMS700 CPCI2DP CPCI405 CPCI4052 \
CPCI405AB CPCI405DT CPCI440 CPCIISER4 \
CRAYL1 csb272 csb472 DASA_SIM \
DP405 DU405 ebony ERIC \
EXBITGEN G2000 HH405 HUB405 \
JSE KAREF luan METROBOX \
MIP405 MIP405T ML2 ml300 \
ocotea OCRTC ORSG p3p440 \
PCI405 pcs440ep PIP405 PLU405 \
PMC405 PPChameleonEVB sbc405 sequoia \
sequoia_nand VOH405 VOM405 W7OLMC \
W7OLMG walnut WUH405 XPEDITE1K \
yellowstone yosemite yucca \
"
#########################################################################

3
Makefile
View File

@ -984,6 +984,9 @@ xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(
ADCIOP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
alpr_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive
AP1000_config:unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix

12
README
View File

@ -1511,8 +1511,8 @@ The following options need to be configured:
Enable auto completion of commands using TAB.
Note that this feature has NOT been implemented yet
for the "hush" shell.
Note that this feature has NOT been implemented yet
for the "hush" shell.
CFG_HUSH_PARSER
@ -3173,11 +3173,11 @@ loadaddr=200000
oftaddr=0x300000
=> bootm $loadaddr - $oftaddr
## Booting image at 00200000 ...
Image Name: Linux-2.6.17-dirty
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1029343 Bytes = 1005.2 kB
Image Name: Linux-2.6.17-dirty
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1029343 Bytes = 1005.2 kB
Load Address: 00000000
Entry Point: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Booting using flat device tree at 0x300000

6
board/amcc/yellowstone/yellowstone.c
View File

@ -552,3 +552,9 @@ void hw_watchdog_reset(void)
}
#endif
void board_reset(void)
{
/* give reset to BCSR */
*(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
}

6
board/amcc/yosemite/yosemite.c
View File

@ -548,3 +548,9 @@ void hw_watchdog_reset(void)
}
#endif
void board_reset(void)
{
/* give reset to BCSR */
*(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
}

18
board/mcc200/mcc200.c
View File

@ -27,6 +27,7 @@
#include <common.h>
#include <mpc5xxx.h>
#include <pci.h>
#include <asm/processor.h>
/* Two MT48LC8M32B2 for 32 MB */
/* #include "mt48lc8m32b2-6-7.h" */
@ -98,6 +99,7 @@ long int initdram (int board_type)
{
ulong dramsize = 0;
ulong dramsize2 = 0;
uint svr, pvr;
#ifndef CFG_RAMBOOT
ulong test1, test2;
@ -192,6 +194,22 @@ long int initdram (int board_type)
#endif /* CFG_RAMBOOT */
/*
* On MPC5200B we need to set the special configuration delay in the
* DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
* Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
*
* "The SDelay should be written to a value of 0x00000004. It is
* required to account for changes caused by normal wafer processing
* parameters."
*/
svr = get_svr();
pvr = get_pvr();
if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
__asm__ volatile ("sync");
}
return dramsize + dramsize2;
}

51
board/prodrive/alpr/Makefile Normal file
View File

@ -0,0 +1,51 @@
#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o fpga.o nand.o
SOBJS = init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend *~
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

328
board/prodrive/alpr/alpr.c Normal file
View File

@ -0,0 +1,328 @@
/*
* (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <spd_sdram.h>
#include <ppc4xx_enet.h>
#include <miiphy.h>
DECLARE_GLOBAL_DATA_PTR;
extern int alpr_fpga_init(void);
int board_early_init_f (void)
{
/*-------------------------------------------------------------------------
* Initialize EBC CONFIG
*-------------------------------------------------------------------------*/
mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK |
EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
mtdcr (uic0sr, 0xffffffff); /* clear all */
mtdcr (uic0er, 0x00000000); /* disable all */
mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
mtdcr (uic0pr, 0xfffffe03); /* per manual */
mtdcr (uic0tr, 0x01c00000); /* per manual */
mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
mtdcr (uic0sr, 0xffffffff); /* clear all */
mtdcr (uic1sr, 0xffffffff); /* clear all */
mtdcr (uic1er, 0x00000000); /* disable all */
mtdcr (uic1cr, 0x00000000); /* all non-critical */
mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */
mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */
mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
mtdcr (uic1sr, 0xffffffff); /* clear all */
mtdcr (uic2sr, 0xffffffff); /* clear all */
mtdcr (uic2er, 0x00000000); /* disable all */
mtdcr (uic2cr, 0x00000000); /* all non-critical */
mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */
mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */
mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
mtdcr (uic2sr, 0xffffffff); /* clear all */
mtdcr (uicb0sr, 0xfc000000); /* clear all */
mtdcr (uicb0er, 0x00000000); /* disable all */
mtdcr (uicb0cr, 0x00000000); /* all non-critical */
mtdcr (uicb0pr, 0xfc000000); /* */
mtdcr (uicb0tr, 0x00000000); /* */
mtdcr (uicb0vr, 0x00000001); /* */
/* Setup GPIO/IRQ multiplexing */
mtsdr(sdr_pfc0, 0x01a03e00);
return 0;
}
int last_stage_init(void)
{
unsigned short reg;
/*
* Configure LED's of both Marvell 88E1111 PHY's
*
* This has to be done after the 4xx ethernet driver is loaded,
* so "last_stage_init()" is the right place.
*/
miiphy_read("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, &reg);
reg |= 0x0001;
miiphy_write("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, reg);
miiphy_read("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, &reg);
reg |= 0x0001;
miiphy_write("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, reg);
return 0;
}
static int board_rev(void)
{
int rev;
u32 pfc0;
/* Setup GPIO14 & 15 as GPIO */
mfsdr(sdr_pfc0, pfc0);
pfc0 |= CFG_GPIO_REV0 | CFG_GPIO_REV1;
mtsdr(sdr_pfc0, pfc0);
/* Setup as input */
out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
rev = (in32(GPIO0_IR) >> 16) & 0x3;
/* Setup GPIO14 & 15 as non GPIO again */
mfsdr(sdr_pfc0, pfc0);
pfc0 &= ~(CFG_GPIO_REV0 | CFG_GPIO_REV1);
mtsdr(sdr_pfc0, pfc0);
return rev;
}
int checkboard (void)
{
char *s = getenv ("serial#");
printf ("Board: ALPR");
if (s != NULL) {
puts (", serial# ");
puts (s);
}
printf(" (Rev. %d)\n", board_rev());
return (0);
}
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
uint *pstart = (uint *) 0x00000000;
uint *pend = (uint *) 0x08000000;
uint *p;
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
for (p = pstart; p < pend; p++)
*p = 0x55555555;
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
return 0;
}
#endif
/*************************************************************************
* pci_pre_init
*
* This routine is called just prior to registering the hose and gives
* the board the opportunity to check things. Returning a value of zero
* indicates that things are bad & PCI initialization should be aborted.
*
* Different boards may wish to customize the pci controller structure
* (add regions, override default access routines, etc) or perform
* certain pre-initialization actions.
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
int pci_pre_init(struct pci_controller * hose )
{
unsigned long strap;
/*--------------------------------------------------------------------------+
* The ocotea board is always configured as the host & requires the
* PCI arbiter to be enabled.
*--------------------------------------------------------------------------*/
mfsdr(sdr_sdstp1, strap);
if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
return 0;
}
/* FPGA Init */
alpr_fpga_init ();
return 1;
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
/*************************************************************************
* pci_target_init
*
* The bootstrap configuration provides default settings for the pci
* inbound map (PIM). But the bootstrap config choices are limited and
* may not be sufficient for a given board.
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
/*--------------------------------------------------------------------------+
* Disable everything
*--------------------------------------------------------------------------*/
out32r( PCIX0_PIM0SA, 0 ); /* disable */
out32r( PCIX0_PIM1SA, 0 ); /* disable */
out32r( PCIX0_PIM2SA, 0 ); /* disable */
out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
/*--------------------------------------------------------------------------+
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
* options to not support sizes such as 128/256 MB.
*--------------------------------------------------------------------------*/
out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
out32r( PCIX0_PIM0LAH, 0 );
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
out32r( PCIX0_BAR0, 0 );
/*--------------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*--------------------------------------------------------------------------*/
out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
/*************************************************************************
* is_pci_host
*
* This routine is called to determine if a pci scan should be
* performed. With various hardware environments (especially cPCI and
* PPMC) it's insufficient to depend on the state of the arbiter enable
* bit in the strap register, or generic host/adapter assumptions.
*
* Rather than hard-code a bad assumption in the general 440 code, the
* 440 pci code requires the board to decide at runtime.
*
* Return 0 for adapter mode, non-zero for host (monarch) mode.
*
*
************************************************************************/
#if defined(CONFIG_PCI)
static void wait_for_pci_ready(void)
{
/*
* Configure EREADY as input
*/
out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CFG_GPIO_EREADY);
udelay(1000);
for (;;) {
if (in32(GPIO0_IR) & CFG_GPIO_EREADY)
return;
}
}
int is_pci_host(struct pci_controller *hose)
{
wait_for_pci_ready();
return 1; /* return 1 for host controller */
}
#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_master_init
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
/*--------------------------------------------------------------------------+
| PowerPC440 PCI Master configuration.
| Map PLB/processor addresses to PCI memory space.
| PLB address 0xA0000000-0xCFFFFFFF ==> PCI address 0x80000000-0xCFFFFFFF
| Use byte reversed out routines to handle endianess.
| Make this region non-prefetchable.
+--------------------------------------------------------------------------*/
out32r( PCIX0_POM0SA, 0 ); /* disable */
out32r( PCIX0_POM1SA, 0 ); /* disable */
out32r( PCIX0_POM2SA, 0 ); /* disable */
out32r(PCIX0_POM0LAL, CFG_PCI_MEMBASE); /* PMM0 Local Address */
out32r(PCIX0_POM0LAH, 0x00000003); /* PMM0 Local Address */
out32r(PCIX0_POM0PCIAL, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_POM0PCIAH, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_POM0SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */
out32r(PCIX0_POM1LAL, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
out32r(PCIX0_POM1LAH, 0x00000003); /* PMM0 Local Address */
out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
out32r(PCIX0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
#ifdef CONFIG_POST
/*
* Returns 1 if keys pressed to start the power-on long-running tests
* Called from board_init_f().
*/
int post_hotkeys_pressed(void)
{
return (ctrlc());
}
#endif

44
board/prodrive/alpr/config.mk Normal file
View File

@ -0,0 +1,44 @@
#
# (C) Copyright 2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# AMCC 440GX Reference Platform (Ocotea) board
#
#TEXT_BASE = 0xFFFE0000
ifeq ($(ramsym),1)
TEXT_BASE = 0x07FD0000
else
TEXT_BASE = 0xFFFC0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG
endif
ifeq ($(dbcr),1)
PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
endif

257
board/prodrive/alpr/fpga.c Normal file
View File

@ -0,0 +1,257 @@
/*
* (C) Copyright 2006
* Heiko Schocher, DENX Software Engineering, hs@denx.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* Altera FPGA configuration support for the ALPR computer from prodrive
*/
#include <common.h>
#include <altera.h>
#include <ACEX1K.h>
#include <command.h>
#include <asm-ppc/processor.h>
#include <ppc440.h>
#include "fpga.h"
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_FPGA)
#ifdef FPGA_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
static unsigned long regval;
#define SET_GPIO_REG_0(reg, bit) { \
regval = in32(reg); \
regval &= ~(0x80000000 >> bit); \
out32(reg, regval); \
}
#define SET_GPIO_REG_1(reg, bit) { \
regval = in32(reg); \
regval |= (0x80000000 >> bit); \
out32(reg, regval); \
}
#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit)
#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit)
#define FPGA_PRG (0x80000000 >> CFG_GPIO_PROG_EN)
#define FPGA_CONFIG (0x80000000 >> CFG_GPIO_CONFIG)
#define FPGA_DATA (0x80000000 >> CFG_GPIO_DATA)
#define FPGA_CLK (0x80000000 >> CFG_GPIO_CLK)
#define OLD_VAL (FPGA_PRG | FPGA_CONFIG)
#define SET_FPGA(data) out32(GPIO0_OR, data)
#define FPGA_WRITE_1 { \
SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \
SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
#define FPGA_WRITE_0 { \
SET_FPGA(OLD_VAL | 0 | 0 ); /* set data to 0 */ \
SET_FPGA(OLD_VAL | FPGA_CLK | 0 );} /* set data to 1 */
/* Plattforminitializations */
/* Here we have to set the FPGA Chain */
/* PROGRAM_PROG_EN = HIGH */
/* PROGRAM_SEL_DPR = LOW */
int fpga_pre_fn (int cookie)
{
unsigned long reg;
reg = in32(GPIO0_IR);
/* Enable the FPGA Chain */
SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_PROG_EN);
SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_PROG_EN);
SET_GPIO_1(CFG_GPIO_PROG_EN);
SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_SEL_DPR);
SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_SEL_DPR);
SET_GPIO_0((CFG_GPIO_SEL_DPR));
/* initialize the GPIO Pins */
/* output */
SET_GPIO_0(CFG_GPIO_CLK);
SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CLK);
SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CLK);
/* output */
SET_GPIO_0(CFG_GPIO_DATA);
SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_DATA);
SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_DATA);
/* First we set STATUS to 0 then as an input */
SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_STATUS);
SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS);
SET_GPIO_0(CFG_GPIO_STATUS);
SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_STATUS);
SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS);
/* output */
SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CONFIG);
SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CONFIG);
SET_GPIO_0(CFG_GPIO_CONFIG);
/* input */
SET_GPIO_0(CFG_GPIO_CON_DON);
SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_CON_DON);
SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CON_DON);
/* CONFIG = 0 STATUS = 0 -> FPGA in reset state */
SET_GPIO_0(CFG_GPIO_CONFIG);
return FPGA_SUCCESS;
}
/* Set the state of CONFIG Pin */
int fpga_config_fn (int assert_config, int flush, int cookie)
{
if (assert_config) {
SET_GPIO_1(CFG_GPIO_CONFIG);
} else {
SET_GPIO_0(CFG_GPIO_CONFIG);
}
return FPGA_SUCCESS;
}
/* Returns the state of STATUS Pin */
int fpga_status_fn (int cookie)
{
unsigned long reg;
reg = in32(GPIO0_IR);
if (reg &= (0x80000000 >> CFG_GPIO_STATUS)) {
PRINTF("STATUS = HIGH\n");
return FPGA_FAIL;
}
PRINTF("STATUS = LOW\n");
return FPGA_SUCCESS;
}
/* Returns the state of CONF_DONE Pin */
int fpga_done_fn (int cookie)
{
unsigned long reg;
reg = in32(GPIO0_IR);
if (reg &= (0x80000000 >> CFG_GPIO_CON_DON)) {
PRINTF("CONF_DON = HIGH\n");
return FPGA_FAIL;
}
PRINTF("CONF_DON = LOW\n");
return FPGA_SUCCESS;
}
/* writes the complete buffer to the FPGA
writing the complete buffer in one function is much faster,
then calling it for every bit */
int fpga_write_fn (void *buf, size_t len, int flush, int cookie)
{
size_t bytecount = 0;
unsigned char *data = (unsigned char *) buf;
unsigned char val=0;
int i;
int len_40 = len / 40;
while (bytecount < len) {
val = data[bytecount++];
i = 8;
do {
if (val & 0x01) {
FPGA_WRITE_1;
} else {
FPGA_WRITE_0;
}
val >>= 1;
i --;
} while (i > 0);
#ifdef CFG_FPGA_PROG_FEEDBACK
if (bytecount % len_40 == 0) {
putc ('.'); /* let them know we are alive */
#ifdef CFG_FPGA_CHECK_CTRLC
if (ctrlc ())
return FPGA_FAIL;
#endif
}
#endif
}
return FPGA_SUCCESS;
}
/* called, when programming is aborted */
int fpga_abort_fn (int cookie)
{
SET_GPIO_1((CFG_GPIO_SEL_DPR));
return FPGA_SUCCESS;
}
/* called, when programming was succesful */
int fpga_post_fn (int cookie)
{
return fpga_abort_fn (cookie);
}
/* Note that these are pointers to code that is in Flash. They will be
* relocated at runtime.
*/
Altera_CYC2_Passive_Serial_fns fpga_fns = {
fpga_pre_fn,
fpga_config_fn,
fpga_status_fn,
fpga_done_fn,
fpga_write_fn,
fpga_abort_fn,
fpga_post_fn
};
Altera_desc fpga[CONFIG_FPGA_COUNT] = {
{Altera_CYC2,
passive_serial,
Altera_EP2C35_SIZE,
(void *) &fpga_fns,
NULL,
0}
};
/*
* Initialize the fpga. Return 1 on success, 0 on failure.
*/
int alpr_fpga_init (void)
{
int i;
PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off);
fpga_init (gd->reloc_off);
for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i);
fpga_add (fpga_altera, &fpga[i]);
}
return 1;
}
#endif

103
board/prodrive/alpr/init.S Normal file
View File

@ -0,0 +1,103 @@
/*
* (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <ppc_asm.tmpl>
#include <config.h>
/* General */
#define TLB_VALID 0x00000200
/* Supported page sizes */
#define SZ_1K 0x00000000
#define SZ_4K 0x00000010
#define SZ_16K 0x00000020
#define SZ_64K 0x00000030
#define SZ_256K 0x00000040
#define SZ_1M 0x00000050
#define SZ_16M 0x00000070
#define SZ_256M 0x00000090
/* Storage attributes */
#define SA_W 0x00000800 /* Write-through */
#define SA_I 0x00000400 /* Caching inhibited */
#define SA_M 0x00000200 /* Memory coherence */
#define SA_G 0x00000100 /* Guarded */
#define SA_E 0x00000080 /* Endian */
/* Access control */
#define AC_X 0x00000024 /* Execute */
#define AC_W 0x00000012 /* Write */
#define AC_R 0x00000009 /* Read */
/* Some handy macros */
#define EPN(e) ((e) & 0xfffffc00)
#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
#define TLB2(a) ( (a)&0x00000fbf )
#define tlbtab_start\
mflr r1 ;\
bl 0f ;
#define tlbtab_end\
.long 0, 0, 0 ; \
0: mflr r0 ; \
mtlr r1 ; \
blr ;
#define tlbentry(epn,sz,rpn,erpn,attr)\
.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
/**************************************************************************
* TLB TABLE
*
* This table is used by the cpu boot code to setup the initial tlb
* entries. Rather than make broad assumptions in the cpu source tree,
* this table lets each board set things up however they like.
*
* Pointer to the table is returned in r1
*
*************************************************************************/
.section .bootpg,"ax"
.globl tlbtab
tlbtab:
tlbtab_start
tlbentry( 0xff000000, SZ_16M, 0xff000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
/* PCI */
tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I )
/* NAND */
tlbentry( CFG_NAND_BASE, SZ_4K, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
tlbtab_end

173
board/prodrive/alpr/nand.c Normal file
View File

@ -0,0 +1,173 @@
/*
* (C) Copyright 2006
* Heiko Schocher, DENX Software Engineering, hs@denx.de
*
* (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#include <asm/processor.h>
#include <nand.h>
struct alpr_ndfc_regs {
u8 cmd[4];
u8 addr_wait;
u8 term;
u8 dummy;
u8 dummy2;
u8 data;
};
static u8 hwctl;
static struct alpr_ndfc_regs *alpr_ndfc = NULL;
#define readb(addr) (u8)(*(volatile u8 *)(addr))
#define writeb(d,addr) *(volatile u8 *)(addr) = ((u8)(d))
/*
* The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to
* the NAND devices. The NDFC has command, address and data registers that
* when accessed will set up the NAND flash pins appropriately. We'll use the
* hwcontrol function to save the configuration in a global variable.
* We can then use this information in the read and write functions to
* determine which NDFC register to access.
*
* There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte).
*/
static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd)
{
switch (cmd) {
case NAND_CTL_SETCLE:
hwctl |= 0x1;
break;
case NAND_CTL_CLRCLE:
hwctl &= ~0x1;
break;
case NAND_CTL_SETALE:
hwctl |= 0x2;
break;
case NAND_CTL_CLRALE:
hwctl &= ~0x2;
break;
case NAND_CTL_SETNCE:
break;
case NAND_CTL_CLRNCE:
writeb(0x00, &(alpr_ndfc->term));
break;
}
}
static void alpr_nand_write_byte(struct mtd_info *mtd, u_char byte)
{
struct nand_chip *nand = mtd->priv;
if (hwctl & 0x1)
/*
* IO_ADDR_W used as CMD[i] reg to support multiple NAND
* chips.
*/
writeb(byte, nand->IO_ADDR_W);
else if (hwctl & 0x2) {
writeb(byte, &(alpr_ndfc->addr_wait));
} else
writeb(byte, &(alpr_ndfc->data));
}
static u_char alpr_nand_read_byte(struct mtd_info *mtd)
{
return readb(&(alpr_ndfc->data));
}
static void alpr_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *nand = mtd->priv;
int i;
for (i = 0; i < len; i++) {
if (hwctl & 0x1)
/*
* IO_ADDR_W used as CMD[i] reg to support multiple NAND
* chips.
*/
writeb(buf[i], nand->IO_ADDR_W);
else if (hwctl & 0x2)
writeb(buf[i], &(alpr_ndfc->addr_wait));
else
writeb(buf[i], &(alpr_ndfc->data));
}
}
static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
int i;
for (i = 0; i < len; i++) {
buf[i] = readb(&(alpr_ndfc->data));
}
}
static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
for (i = 0; i < len; i++)
if (buf[i] != readb(&(alpr_ndfc->data)))
return i;
return 0;
}
static int alpr_nand_dev_ready(struct mtd_info *mtd)
{
volatile u_char val;
/*
* Blocking read to wait for NAND to be ready
*/
val = readb(&(alpr_ndfc->addr_wait));
/*
* Return always true
*/
return 1;
}
void board_nand_init(struct nand_chip *nand)
{
alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE;
nand->eccmode = NAND_ECC_SOFT;
/* Reference hardware control function */
nand->hwcontrol = alpr_nand_hwcontrol;
/* Set command delay time */
nand->write_byte = alpr_nand_write_byte;
nand->read_byte = alpr_nand_read_byte;
nand->write_buf = alpr_nand_write_buf;
nand->read_buf = alpr_nand_read_buf;
nand->verify_buf = alpr_nand_verify_buf;
nand->dev_ready = alpr_nand_dev_ready;
}
#endif

157
board/prodrive/alpr/u-boot.lds Normal file
View File

@ -0,0 +1,157 @@
/*
* (C) Copyright 2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_ARCH(powerpc)
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
.resetvec 0xFFFFFFFC :
{
*(.resetvec)
} = 0xffff
.bootpg 0xFFFFF000 :
{
cpu/ppc4xx/start.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
.rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
.rela.data : { *(.rela.data) }
.rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
.plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
board/prodrive/alpr/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
cpu/ppc4xx/serial.o (.text)
cpu/ppc4xx/cpu_init.o (.text)
cpu/ppc4xx/speed.o (.text)
common/dlmalloc.o (.text)
lib_generic/crc32.o (.text)
lib_ppc/extable.o (.text)
lib_generic/zlib.o (.text)
/* . = env_offset;*/
/* common/environment.o(.text)*/
*(.text)
*(.fixup)
*(.got1)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
*(.rodata)
*(.rodata1)
*(.rodata.str1.4)
*(.eh_frame)
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
*(.got)
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
*(.fixup)
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
*(.data)
*(.data1)
*(.sdata)
*(.sdata2)
*(.dynamic)
CONSTRUCTORS
}
_edata = .;
PROVIDE (edata = .);
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(256);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(256);
__init_end = .;
__bss_start = .;
.bss :
{
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss)
*(COMMON)
}
_end = . ;
PROVIDE (end = .);
}

4
board/prodrive/common/flash.c
View File

@ -48,6 +48,7 @@ void flash_print_info(flash_info_t *info)
case FLASH_MAN_AMD: printf ("AMD "); break;
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
case FLASH_MAN_SST: printf ("SST "); break;
case FLASH_MAN_STM: printf ("ST "); break;
case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break;
default: printf ("Unknown Vendor "); break;
}
@ -156,6 +157,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
case (CFG_FLASH_WORD_SIZE)STM_MANUFACT:
info->flash_id = FLASH_MAN_STM;
break;
case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
info->flash_id = FLASH_MAN_EXCEL;
break;

2
board/tqm5200/cam5200_flash.c
View File

@ -759,7 +759,7 @@ unsigned long flash_init(void)
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
i, size_b[i], size_b[i] << 20);
i+1, size_b[i], size_b[i] << 20);
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
}

2
board/tqm5200/tqm5200.c
View File

@ -289,7 +289,7 @@ int checkboard (void)
#elif defined(CONFIG_TB5200)
# define CARRIER_NAME "TB5200"
#elif defined(CONFIG_CAM5200)
# define CARRIER_NAME "Cam5200"
# define CARRIER_NAME "CAM5200"
#elif defined(CONFIG_FO300)
# define CARRIER_NAME "FO300"
#else

2
common/Makefile
View File

@ -41,7 +41,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \
cmd_pci.o cmd_pcmcia.o cmd_portio.o \
cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o \
cmd_usb.o cmd_vfd.o \
command.o console.o devices.o dlmalloc.o docecc.o \
command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \
environment.o env_common.o \
env_nand.o env_dataflash.o env_flash.o env_eeprom.o \
env_nvram.o env_nowhere.o \

27
common/altera.c
View File

@ -50,15 +50,20 @@ int altera_load( Altera_desc *desc, void *buf, size_t bsize )
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (!altera_validate (desc, __FUNCTION__)) {
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
#if (CONFIG_FPGA & CFG_ACEX1K)
PRINTF ("%s: Launching the ACEX1K Loader...\n",
__FUNCTION__);
ret_val = ACEX1K_load (desc, buf, bsize);
#elif (CONFIG_FPGA & CFG_CYCLON2)
PRINTF ("%s: Launching the CYCLON II Loader...\n",
__FUNCTION__);
ret_val = CYC2_load (desc, buf, bsize);
#else
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
@ -78,7 +83,7 @@ int altera_dump( Altera_desc *desc, void *buf, size_t bsize )
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (!altera_validate (desc, __FUNCTION__)) {
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
@ -106,13 +111,16 @@ int altera_info( Altera_desc *desc )
{
int ret_val = FPGA_FAIL;
if (altera_validate (desc, __FUNCTION__)) {
if (altera_validate (desc, (char *)__FUNCTION__)) {
printf ("Family: \t");
switch (desc->family) {
case Altera_ACEX1K:
printf ("ACEX1K\n");
break;
/* Add new family types here */
case Altera_CYC2:
printf ("CYCLON II\n");
break;
default:
printf ("Unknown family type, %d\n", desc->family);
}
@ -147,8 +155,11 @@ int altera_info( Altera_desc *desc )
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
#if (CONFIG_FPGA & CFG_ACEX1K)
ACEX1K_info (desc);
#elif (CONFIG_FPGA & CFG_CYCLON2)
CYC2_info (desc);
#else
/* just in case */
printf ("%s: No support for ACEX1K devices.\n",
@ -176,7 +187,7 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset)
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (!altera_validate (desc, __FUNCTION__)) {
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
@ -186,6 +197,14 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset)
#else
printf ("%s: No support for ACEX devices.\n",
__FUNCTION__);
#endif
break;
case Altera_CYC2:
#if (CONFIG_FPGA & CFG_CYCLON2)
ret_val = CYC2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for CYCLON II devices.\n",
__FUNCTION__);
#endif
break;
/* Add new family types here */

56
common/cmd_bootm.c
View File

@ -833,10 +833,6 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
printf ("ERROR: flat device tree size does not agree with image\n");
return;
}
} else if (getenv("disable_of") == NULL) {
printf ("ERROR: bootm needs flat device tree as third argument\n");
return;
}
#endif
if (!data) {
@ -913,23 +909,11 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
SHOW_BOOT_PROGRESS (15);
#ifndef CONFIG_OF_FLAT_TREE
#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
unlock_ram_in_cache();
#endif
/*
* Linux Kernel Parameters:
* r3: ptr to board info data
* r4: initrd_start or 0 if no initrd
* r5: initrd_end - unused if r4 is 0
* r6: Start of command line string
* r7: End of command line string
*/
(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
#else /* CONFIG_OF_FLAT_TREE */
#ifdef CONFIG_OF_FLAT_TREE
/* move of_flat_tree if needed */
if (of_data) {
ulong of_start, of_len;
@ -948,30 +932,36 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
of_start, of_start + of_len - 1);
memmove ((void *)of_start, (void *)of_data, of_len);
}
ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
/* ft_dump_blob(of_flat_tree); */
#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
unlock_ram_in_cache();
#endif
/*
* Linux Kernel Parameters:
* Linux Kernel Parameters (passing board info data):
* r3: ptr to board info data
* r4: initrd_start or 0 if no initrd
* r5: initrd_end - unused if r4 is 0
* r6: Start of command line string
* r7: End of command line string
*/
#ifdef CONFIG_OF_FLAT_TREE
if (!of_flat_tree) /* no device tree; boot old style */
#endif
(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
/* does not return */
#ifdef CONFIG_OF_FLAT_TREE
/*
* Linux Kernel Parameters (passing device tree):
* r3: ptr to OF flat tree, followed by the board info data
* r4: physical pointer to the kernel itself
* r5: NULL
* r6: NULL
* r7: NULL
*/
if (getenv("disable_of") != NULL)
(*kernel) ((bd_t *)of_flat_tree, initrd_start, initrd_end,
cmd_start, cmd_end);
else {
ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
/* ft_dump_blob(of_flat_tree); */
(*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0);
}
#endif /* CONFIG_OF_FLAT_TREE */
ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
/* ft_dump_blob(of_flat_tree); */
(*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0);
#endif
}
#endif /* CONFIG_PPC */

21
common/cmd_fpga.c
View File

@ -55,6 +55,7 @@ static int fpga_get_op (char *opstr);
#define FPGA_LOAD 1
#define FPGA_LOADB 2
#define FPGA_DUMP 3
#define FPGA_LOADMK 4
/* Convert bitstream data and load into the fpga */
int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
@ -251,6 +252,23 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
rc = fpga_loadbitstream(dev, fpga_data, data_size);
break;
case FPGA_LOADMK:
{
image_header_t header;
image_header_t *hdr = &header;
ulong data;
memmove (&header, (char *)fpga_data, sizeof(image_header_t));
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
puts ("Bad Magic Number\n");
return 1;
}
data = ((ulong)fpga_data + sizeof(image_header_t));
data_size = ntohl(hdr->ih_size);
rc = fpga_load (dev, (void *)data, data_size);
}
break;
case FPGA_DUMP:
rc = fpga_dump (dev, fpga_data, data_size);
break;
@ -282,6 +300,8 @@ static int fpga_get_op (char *opstr)
op = FPGA_LOADB;
} else if (!strcmp ("load", opstr)) {
op = FPGA_LOAD;
} else if (!strcmp ("loadmk", opstr)) {
op = FPGA_LOADMK;
} else if (!strcmp ("dump", opstr)) {
op = FPGA_DUMP;
}
@ -299,5 +319,6 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga,
"\tinfo\tlist known device information\n"
"\tload\tLoad device from memory buffer\n"
"\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n"
"\tloadmk\tLoad device generated with mkimage\n"
"\tdump\tLoad device to memory buffer\n");
#endif /* CONFIG_FPGA && CONFIG_COMMANDS & CFG_CMD_FPGA */

305
common/cyclon2.c Normal file
View File

@ -0,0 +1,305 @@
/*
* (C) Copyright 2006
* Heiko Schocher, hs@denx.de
* Based on ACE1XK.c
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <common.h> /* core U-Boot definitions */
#include <altera.h>
#include <ACEX1K.h> /* ACEX device family */
#if (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2))
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
/* Note: The assumption is that we cannot possibly run fast enough to
* overrun the device (the Slave Parallel mode can free run at 50MHz).
* If there is a need to operate slower, define CONFIG_FPGA_DELAY in
* the board config file to slow things down.
*/
#ifndef CONFIG_FPGA_DELAY
#define CONFIG_FPGA_DELAY()
#endif
#ifndef CFG_FPGA_WAIT
#define CFG_FPGA_WAIT CFG_HZ/10 /* 100 ms */
#endif
static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize );
static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize );
/* static int CYC2_ps_info( Altera_desc *desc ); */
static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset );
/* ------------------------------------------------------------------------- */
/* CYCLON2 Generic Implementation */
int CYC2_load (Altera_desc * desc, void *buf, size_t bsize)
{
int ret_val = FPGA_FAIL;
switch (desc->iface) {
case passive_serial:
PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
ret_val = CYC2_ps_load (desc, buf, bsize);
break;
/* Add new interface types here */
default:
printf ("%s: Unsupported interface type, %d\n",
__FUNCTION__, desc->iface);
}
return ret_val;
}
int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize)
{
int ret_val = FPGA_FAIL;
switch (desc->iface) {
case passive_serial:
PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
ret_val = CYC2_ps_dump (desc, buf, bsize);
break;
/* Add new interface types here */
default:
printf ("%s: Unsupported interface type, %d\n",
__FUNCTION__, desc->iface);
}
return ret_val;
}
int CYC2_info( Altera_desc *desc )
{
return FPGA_SUCCESS;
}
int CYC2_reloc (Altera_desc * desc, ulong reloc_offset)
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (desc->family != Altera_CYC2) {
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
return FPGA_FAIL;
} else
switch (desc->iface) {
case passive_serial:
ret_val = CYC2_ps_reloc (desc, reloc_offset);
break;
/* Add new interface types here */
default:
printf ("%s: Unsupported interface type, %d\n",
__FUNCTION__, desc->iface);
}
return ret_val;
}
/* ------------------------------------------------------------------------- */
/* CYCLON2 Passive Serial Generic Implementation */
static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
{
int ret_val = FPGA_FAIL; /* assume the worst */
Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns;
int ret = 0;
PRINTF ("%s: start with interface functions @ 0x%p\n",
__FUNCTION__, fn);
if (fn) {
int cookie = desc->cookie; /* make a local copy */
unsigned long ts; /* timestamp */
PRINTF ("%s: Function Table:\n"
"ptr:\t0x%p\n"
"struct: 0x%p\n"
"config:\t0x%p\n"
"status:\t0x%p\n"
"write:\t0x%p\n"
"done:\t0x%p\n\n",
__FUNCTION__, &fn, fn, fn->config, fn->status,
fn->write, fn->done);
#ifdef CFG_FPGA_PROG_FEEDBACK
printf ("Loading FPGA Device %d...", cookie);
#endif
/*
* Run the pre configuration function if there is one.
*/
if (*fn->pre) {
(*fn->pre) (cookie);
}
/* Establish the initial state */
(*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */
udelay(2); /* T_cfg > 2us */
/* Wait for nSTATUS to be asserted */
ts = get_timer (0); /* get current time */
do {
CONFIG_FPGA_DELAY ();
if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for STATUS to go high.\n");
(*fn->abort) (cookie);
return FPGA_FAIL;
}
} while (!(*fn->status) (cookie));
/* Get ready for the burn */
CONFIG_FPGA_DELAY ();
ret = (*fn->write) (buf, bsize, TRUE, cookie);
if (ret) {
puts ("** Write failed.\n");
(*fn->abort) (cookie);
return FPGA_FAIL;
}
#ifdef CFG_FPGA_PROG_FEEDBACK
puts(" OK? ...");
#endif
CONFIG_FPGA_DELAY ();
#ifdef CFG_FPGA_PROG_FEEDBACK
putc (' '); /* terminate the dotted line */
#endif
/*
* Checking FPGA's CONF_DONE signal - correctly booted ?
*/
if ( ! (*fn->done) (cookie) ) {
puts ("** Booting failed! CONF_DONE is still deasserted.\n");
(*fn->abort) (cookie);
return (FPGA_FAIL);
}
#ifdef CFG_FPGA_PROG_FEEDBACK
puts(" OK\n");
#endif
ret_val = FPGA_SUCCESS;
#ifdef CFG_FPGA_PROG_FEEDBACK
if (ret_val == FPGA_SUCCESS) {
puts ("Done.\n");
}
else {
puts ("Fail.\n");
}
#endif
(*fn->post) (cookie);
} else {
printf ("%s: NULL Interface function table!\n", __FUNCTION__);
}
return ret_val;
}
static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize)
{
/* Readback is only available through the Slave Parallel and */
/* boundary-scan interfaces. */
printf ("%s: Passive Serial Dumping is unavailable\n",
__FUNCTION__);
return FPGA_FAIL;
}
static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
{
int ret_val = FPGA_FAIL; /* assume the worst */
Altera_CYC2_Passive_Serial_fns *fn_r, *fn =
(Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns);
if (fn) {
ulong addr;
/* Get the relocated table address */
addr = (ulong) fn + reloc_offset;
fn_r = (Altera_CYC2_Passive_Serial_fns *) addr;
if (!fn_r->relocated) {
if (memcmp (fn_r, fn,
sizeof (Altera_CYC2_Passive_Serial_fns))
== 0) {
/* good copy of the table, fix the descriptor pointer */
desc->iface_fns = fn_r;
} else {
PRINTF ("%s: Invalid function table at 0x%p\n",
__FUNCTION__, fn_r);
return FPGA_FAIL;
}
PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
desc);
addr = (ulong) (fn->pre) + reloc_offset;
fn_r->pre = (Altera_pre_fn) addr;
addr = (ulong) (fn->config) + reloc_offset;
fn_r->config = (Altera_config_fn) addr;
addr = (ulong) (fn->status) + reloc_offset;
fn_r->status = (Altera_status_fn) addr;
addr = (ulong) (fn->done) + reloc_offset;
fn_r->done = (Altera_done_fn) addr;
addr = (ulong) (fn->write) + reloc_offset;
fn_r->write = (Altera_write_fn) addr;
addr = (ulong) (fn->abort) + reloc_offset;
fn_r->abort = (Altera_abort_fn) addr;
addr = (ulong) (fn->post) + reloc_offset;
fn_r->post = (Altera_post_fn) addr;
fn_r->relocated = TRUE;
} else {
/* this table has already been moved */
/* XXX - should check to see if the descriptor is correct */
desc->iface_fns = fn_r;
}
ret_val = FPGA_SUCCESS;
} else {
printf ("%s: NULL Interface function table!\n", __FUNCTION__);
}
return ret_val;
}
#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) */

8
common/fpga.c
View File

@ -139,7 +139,7 @@ static int fpga_dev_info( int devnum )
printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc );
ret_val = xilinx_info( desc->devdesc );
#else
fpga_no_sup( __FUNCTION__, "Xilinx devices" );
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
@ -178,7 +178,7 @@ int fpga_reloc( fpga_type devtype, void *desc, ulong reloc_off )
#if CONFIG_FPGA & CFG_FPGA_XILINX
ret_val = xilinx_reloc( desc, reloc_off );
#else
fpga_no_sup( __FUNCTION__, "Xilinx devices" );
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
@ -271,7 +271,7 @@ int fpga_load( int devnum, void *buf, size_t bsize )
#if CONFIG_FPGA & CFG_FPGA_XILINX
ret_val = xilinx_load( desc->devdesc, buf, bsize );
#else
fpga_no_sup( __FUNCTION__, "Xilinx devices" );
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
@ -304,7 +304,7 @@ int fpga_dump( int devnum, void *buf, size_t bsize )
#if CONFIG_FPGA & CFG_FPGA_XILINX
ret_val = xilinx_dump( desc->devdesc, buf, bsize );
#else
fpga_no_sup( __FUNCTION__, "Xilinx devices" );
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:

17
common/memsize.c
View File

@ -21,6 +21,16 @@
* MA 02111-1307 USA
*/
#include <config.h>
#ifdef __PPC__
/*
* At least on G2 PowerPC cores, sequential accesses to non-existent
* memory must be synchronized.
*/
# include <asm/io.h> /* for sync() */
#else
# define sync() /* nothing */
#endif
/*
* Check memory range for valid RAM. A simple memory test determines
@ -38,20 +48,27 @@ long get_ram_size(volatile long *base, long maxsize)
for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
addr = base + cnt; /* pointer arith! */
sync ();
save[i++] = *addr;
sync ();
*addr = ~cnt;
}
addr = base;
sync ();
save[i] = *addr;
sync ();
*addr = 0;
sync ();
if ((val = *addr) != 0) {
/* Restore the original data before leaving the function.
*/
sync ();
*addr = save[i];
for (cnt = 1; cnt < maxsize / sizeof(long); cnt <<= 1) {
addr = base + cnt;
sync ();
*addr = save[--i];
}
return (0);

4
cpu/ppc4xx/405gp_pci.c
View File

@ -475,7 +475,11 @@ void pci_440_init (struct pci_controller *hose)
pci_set_region(hose->regions + reg_num++,
CFG_PCI_TARGBASE,
CFG_PCI_MEMBASE,
#ifdef CFG_PCI_MEMSIZE
CFG_PCI_MEMSIZE,
#else
0x10000000,
#endif
PCI_REGION_MEM );
#if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \

30
cpu/ppc4xx/4xx_enet.c
View File

@ -264,10 +264,10 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
bis->bi_phymode[3] = BI_PHYMODE_ZMII;
break;
case 2:
zmiifer = ZMII_FER_SMII << ZMII_FER_V(0);
zmiifer = ZMII_FER_SMII << ZMII_FER_V(1);
zmiifer = ZMII_FER_SMII << ZMII_FER_V(2);
zmiifer = ZMII_FER_SMII << ZMII_FER_V(3);
zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0);
zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1);
zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2);
zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3);
bis->bi_phymode[0] = BI_PHYMODE_ZMII;
bis->bi_phymode[1] = BI_PHYMODE_ZMII;
bis->bi_phymode[2] = BI_PHYMODE_ZMII;
@ -470,8 +470,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
#else
if ((devnum == 0) || (devnum == 1)) {
out32 (ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
}
else { /* ((devnum == 2) || (devnum == 3)) */
} else { /* ((devnum == 2) || (devnum == 3)) */
out32 (ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum));
out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) |
(RGMII_FER_RGMII << RGMII_FER_V (3))));
@ -561,22 +560,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
* otherwise, just check the speeds & feeds
*/
if (hw_p->first_init == 0) {
#if defined(CONFIG_88E1111_CLK_DELAY)
/*
* On some boards (e.g. ALPR) the Marvell 88E1111 PHY needs
* the "RGMII transmit timing control" and "RGMII receive
* timing control" bits set, so that Gbit communication works
* without problems.
* Also set the "Transmitter disable" to 1 to enable the
* transmitter.
* After setting these bits a soft-reset must occur for this
* change to become active.
*/
miiphy_read (dev->name, reg, 0x14, &reg_short);
reg_short |= (1 << 7) | (1 << 1) | (1 << 0);
miiphy_write (dev->name, reg, 0x14, reg_short);
#endif
#if defined(CONFIG_M88E1111_PHY) /* test-only: merge with CONFIG_88E1111_CLK_DELAY !!! */
#if defined(CONFIG_M88E1111_PHY)
miiphy_write (dev->name, reg, 0x14, 0x0ce3);
miiphy_write (dev->name, reg, 0x18, 0x4101);
miiphy_write (dev->name, reg, 0x09, 0x0e00);
@ -808,7 +792,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR;
hw_p->rx_ready[i] = -1;
#if 0
printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) rx[i].data_ptr);
printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) hw_p->rx[i].data_ptr);
#endif
}

24
cpu/ppc4xx/cpu.c
View File

@ -41,6 +41,10 @@
DECLARE_GLOBAL_DATA_PTR;
#endif
#if defined(CONFIG_BOARD_RESET)
void board_reset(void);
#endif
#if defined(CONFIG_440)
#define FREQ_EBC (sys_info.freqEPB)
#else
@ -422,23 +426,19 @@ int ppc440spe_revB() {
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
#if defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)
/*give reset to BCSR*/
*(unsigned char*)(CFG_BCSR_BASE | 0x06) = 0x09;
#if defined(CONFIG_BOARD_RESET)
board_reset();
#else
#if defined(CFG_4xx_RESET_TYPE)
mtspr(dbcr0, CFG_4xx_RESET_TYPE << 28);
#else
/*
* Initiate system reset in debug control register DBCR
*/
__asm__ __volatile__("lis 3, 0x3000" ::: "r3");
#if defined(CONFIG_440)
__asm__ __volatile__("mtspr 0x134, 3");
#else
__asm__ __volatile__("mtspr 0x3f2, 3");
#endif
mtspr(dbcr0, 0x30000000);
#endif /* defined(CFG_4xx_RESET_TYPE) */
#endif /* defined(CONFIG_BOARD_RESET) */
#endif/* defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)*/
return 1;
}

4
cpu/ppc4xx/cpu_init.c
View File

@ -320,6 +320,10 @@ cpu_init_f (void)
val |= 0xb8000000; /* generate system reset after 1.34 seconds */
#else
val |= 0xf0000000; /* generate system reset after 2.684 seconds */
#endif
#if defined(CFG_4xx_RESET_TYPE)
val &= ~0x30000000; /* clear WRC bits */
val |= CFG_4xx_RESET_TYPE << 28; /* set board specific WRC type */
#endif
mtspr(tcr, val);

8
cpu/ppc4xx/sdram.c
View File

@ -351,6 +351,14 @@ long int initdram(int board_type)
int i;
int tr1_bank1;
#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
/*
* Soft-reset SDRAM controller.
*/
mtsdr(sdr_srst, SDR0_SRST_DMC);
mtsdr(sdr_srst, 0x00000000);
#endif
for (i=0; i<N_MB0CF; i++) {
/*
* Disable memory controller.

23
cpu/ppc4xx/start.S
View File

@ -204,6 +204,18 @@ _start_440:
mfspr r1,mcsr
mtspr mcsr,r1
#endif
/*----------------------------------------------------------------*/
/* CCR0 init */
/*----------------------------------------------------------------*/
/* Disable store gathering & broadcast, guarantee inst/data
* cache block touch, force load/store alignment
* (see errata 1.12: 440_33)
*/
lis r1,0x0030 /* store gathering & broadcast disable */
ori r1,r1,0x6000 /* cache touch */
mtspr ccr0,r1
/*----------------------------------------------------------------*/
/* Initialize debug */
/*----------------------------------------------------------------*/
@ -225,17 +237,6 @@ _start_440:
mtspr dbsr,r1 /* Clear all valid bits */
skip_debug_init:
/*----------------------------------------------------------------*/
/* CCR0 init */
/*----------------------------------------------------------------*/
/* Disable store gathering & broadcast, guarantee inst/data
* cache block touch, force load/store alignment
* (see errata 1.12: 440_33)
*/
lis r1,0x0030 /* store gathering & broadcast disable */
ori r1,r1,0x6000 /* cache touch */
mtspr ccr0,r1
#if defined (CONFIG_440SPE)
/*----------------------------------------------------------------+
| Initialize Core Configuration Reg1.

214
drivers/cfi_flash.c
View File

@ -4,11 +4,12 @@
*
* Copyright (C) 2003 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
* Modified to work with AMD flashes
*
* Copyright (C) 2004
* Ed Okerson
* Modified to work with little-endian systems.
*
* Copyright (C) 2006
* Tolunay Orkun <listmember@orkun.us>
*
* See file CREDITS for list of people who contributed to this
* project.
@ -28,17 +29,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* History
* 01/20/2004 - combined variants of original driver.
* 01/22/2004 - Write performance enhancements for parallel chips (Tolunay)
* 01/23/2004 - Support for x8/x16 chips (Rune Raknerud)
* 01/27/2004 - Little endian support Ed Okerson
*
* Tested Architectures
* Port Width Chip Width # of banks Flash Chip Board
* 32 16 1 28F128J3 seranoa/eagle
* 64 16 1 28F128J3 seranoa/falcon
*
*/
/* The DEBUG define must be before common to enable debugging */
@ -54,21 +44,16 @@
* This file implements a Common Flash Interface (CFI) driver for U-Boot.
* The width of the port and the width of the chips are determined at initialization.
* These widths are used to calculate the address for access CFI data structures.
* It has been tested on an Intel Strataflash implementation and AMD 29F016D.
*
* References
* JEDEC Standard JESD68 - Common Flash Interface (CFI)
* JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
* Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
* Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
* AMD CFI Specification, Release 2.0 December 1, 2001
* AMD/Spansion Application Note: Migration from Single-byte to Three-byte
* Device IDs, Publication Number 25538 Revision A, November 8, 2001
*
* TODO
*
* Use Primary Extended Query table (PRI) and Alternate Algorithm Query
* Table (ALT) to determine if protection is available
*
* Add support for other command sets Use the PRI and ALT to determine command set
* Verify erase and program timeouts.
*/
#ifndef CFG_FLASH_BANKS_LIST
@ -114,6 +99,10 @@
#define AMD_ADDR_START ((info->portwidth == FLASH_CFI_8BIT) ? 0xAAA : 0x555)
#define AMD_ADDR_ACK ((info->portwidth == FLASH_CFI_8BIT) ? 0x555 : 0x2AA)
#define FLASH_OFFSET_MANUFACTURER_ID 0x00
#define FLASH_OFFSET_DEVICE_ID 0x01
#define FLASH_OFFSET_DEVICE_ID2 0x0E
#define FLASH_OFFSET_DEVICE_ID3 0x0F
#define FLASH_OFFSET_CFI 0x55
#define FLASH_OFFSET_CFI_RESP 0x10
#define FLASH_OFFSET_PRIMARY_VENDOR 0x13
@ -135,25 +124,20 @@
#define FLASH_OFFSET_USER_PROTECTION 0x85
#define FLASH_OFFSET_INTEL_PROTECTION 0x81
#define FLASH_MAN_CFI 0x01000000
#define CFI_CMDSET_NONE 0
#define CFI_CMDSET_INTEL_EXTENDED 1
#define CFI_CMDSET_AMD_STANDARD 2
#define CFI_CMDSET_INTEL_STANDARD 3
#define CFI_CMDSET_AMD_EXTENDED 4
#define CFI_CMDSET_MITSU_STANDARD 256
#define CFI_CMDSET_MITSU_EXTENDED 257
#define CFI_CMDSET_SST 258
#define CFI_CMDSET_NONE 0
#define CFI_CMDSET_INTEL_EXTENDED 1
#define CFI_CMDSET_AMD_STANDARD 2
#define CFI_CMDSET_INTEL_STANDARD 3
#define CFI_CMDSET_AMD_EXTENDED 4
#define CFI_CMDSET_MITSU_STANDARD 256
#define CFI_CMDSET_MITSU_EXTENDED 257
#define CFI_CMDSET_SST 258
#ifdef CFG_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
# undef FLASH_CMD_RESET
# define FLASH_CMD_RESET AMD_CMD_RESET /* use AMD-Reset instead */
# define FLASH_CMD_RESET AMD_CMD_RESET /* use AMD-Reset instead */
#endif
typedef union {
unsigned char c;
unsigned short w;
@ -168,7 +152,7 @@ typedef union {
volatile unsigned long long *llp;
} cfiptr_t;
#define NUM_ERASE_REGIONS 4
#define NUM_ERASE_REGIONS 4 /* max. number of erase regions */
/* use CFG_MAX_FLASH_BANKS_DETECT if defined */
#ifdef CFG_MAX_FLASH_BANKS_DETECT
@ -200,6 +184,7 @@ static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect);
static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
static void flash_read_jedec_ids (flash_info_t * info);
static int flash_detect_cfi (flash_info_t * info);
static int flash_write_cfiword (flash_info_t * info, ulong dest, cfiword_t cword);
static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
@ -307,7 +292,7 @@ ushort flash_read_ushort (flash_info_t * info, flash_sect_t sect, uint offset)
}
/*-----------------------------------------------------------------------
* read a long word by picking the least significant byte of each maiximum
* read a long word by picking the least significant byte of each maximum
* port size word. Swap for ppc format.
*/
ulong flash_read_long (flash_info_t * info, flash_sect_t sect, uint offset)
@ -529,14 +514,42 @@ void flash_print_info (flash_info_t * info)
(info->portwidth << 3), (info->chipwidth << 3));
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf (" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
printf (" ");
switch (info->vendor) {
case CFI_CMDSET_INTEL_STANDARD:
printf ("Intel Standard");
break;
case CFI_CMDSET_INTEL_EXTENDED:
printf ("Intel Extended");
break;
case CFI_CMDSET_AMD_STANDARD:
printf ("AMD Standard");
break;
case CFI_CMDSET_AMD_EXTENDED:
printf ("AMD Extended");
break;
default:
printf ("Unknown (%d)", info->vendor);
break;
}
printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x%02X",
info->manufacturer_id, info->device_id);
if (info->device_id == 0x7E) {
printf("%04X", info->device_id2);
}
printf ("\n Erase timeout: %ld ms, write timeout: %ld ms\n",
info->erase_blk_tout,
info->write_tout,
info->write_tout);
if (info->buffer_size > 1) {
printf (" Buffer write timeout: %ld ms, buffer size: %d bytes\n",
info->buffer_write_tout,
info->buffer_size);
}
puts (" Sector Start Addresses:");
puts ("\n Sector Start Addresses:");
for (i = 0; i < info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n");
#ifdef CFG_FLASH_EMPTY_INFO
int k;
int size;
@ -560,18 +573,15 @@ void flash_print_info (flash_info_t * info)
}
}
if ((i % 5) == 0)
printf ("\n");
/* print empty and read-only info */
printf (" %08lX%s%s",
printf (" %08lX %c %s ",
info->start[i],
erased ? " E" : " ",
info->protect[i] ? "RO " : " ");
erased ? 'E' : ' ',
info->protect[i] ? "RO" : " ");
#else /* ! CFG_FLASH_EMPTY_INFO */
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
info->start[i], info->protect[i] ? " (RO)" : " ");
printf (" %08lX %s ",
info->start[i],
info->protect[i] ? "RO" : " ");
#endif
}
putc ('\n');
@ -1070,6 +1080,55 @@ static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uc
return retval;
}
/*-----------------------------------------------------------------------
* read jedec ids from device and set corresponding fields in info struct
*
* Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct
*
*/
static void flash_read_jedec_ids (flash_info_t * info)
{
info->manufacturer_id = 0;
info->device_id = 0;
info->device_id2 = 0;
switch (info->vendor) {
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
udelay(1000); /* some flash are slow to respond */
info->manufacturer_id = flash_read_uchar (info,
FLASH_OFFSET_MANUFACTURER_ID);
info->device_id = flash_read_uchar (info,
FLASH_OFFSET_DEVICE_ID);
flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
break;
case CFI_CMDSET_AMD_STANDARD:
case CFI_CMDSET_AMD_EXTENDED:
flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
flash_unlock_seq(info, 0);
flash_write_cmd(info, 0, AMD_ADDR_START, FLASH_CMD_READ_ID);
udelay(1000); /* some flash are slow to respond */
info->manufacturer_id = flash_read_uchar (info,
FLASH_OFFSET_MANUFACTURER_ID);
info->device_id = flash_read_uchar (info,
FLASH_OFFSET_DEVICE_ID);
if (info->device_id == 0x7E) {
/* AMD 3-byte (expanded) device ids */
info->device_id2 = flash_read_uchar (info,
FLASH_OFFSET_DEVICE_ID2);
info->device_id2 <<= 8;
info->device_id2 |= flash_read_uchar (info,
FLASH_OFFSET_DEVICE_ID3);
}
flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
break;
default:
break;
}
}
/*-----------------------------------------------------------------------
* detect if flash is compatible with the Common Flash Interface (CFI)
* http://www.jedec.org/download/search/jesd68.pdf
@ -1120,15 +1179,31 @@ ulong flash_get_size (ulong base, int banknum)
uchar num_erase_regions;
int erase_region_size;
int erase_region_count;
int geometry_reversed = 0;
info->ext_addr = 0;
info->cfi_version = 0;
#ifdef CFG_FLASH_PROTECTION
int ext_addr;
info->legacy_unlock = 0;
#endif
info->start[0] = base;
if (flash_detect_cfi (info)) {
info->vendor = flash_read_ushort (info, 0, FLASH_OFFSET_PRIMARY_VENDOR);
info->vendor = flash_read_ushort (info, 0,
FLASH_OFFSET_PRIMARY_VENDOR);
flash_read_jedec_ids (info);
flash_write_cmd (info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
num_erase_regions = flash_read_uchar (info,
FLASH_OFFSET_NUM_ERASE_REGIONS);
info->ext_addr = flash_read_ushort (info, 0,
FLASH_OFFSET_EXT_QUERY_T_P_ADDR);
if (info->ext_addr) {
info->cfi_version = (ushort) flash_read_uchar (info,
info->ext_addr + 3) << 8;
info->cfi_version |= (ushort) flash_read_uchar (info,
info->ext_addr + 4);
}
#ifdef DEBUG
flash_printqry (info, 0);
#endif
@ -1139,26 +1214,46 @@ ulong flash_get_size (ulong base, int banknum)
info->cmd_reset = FLASH_CMD_RESET;
#ifdef CFG_FLASH_PROTECTION
/* read legacy lock/unlock bit from intel flash */
ext_addr = flash_read_ushort (info, 0,
FLASH_OFFSET_EXT_QUERY_T_P_ADDR);
info->legacy_unlock =
flash_read_uchar (info, ext_addr + 5) & 0x08;
if (info->ext_addr) {
info->legacy_unlock = flash_read_uchar (info,
info->ext_addr + 5) & 0x08;
}
#endif
break;
case CFI_CMDSET_AMD_STANDARD:
case CFI_CMDSET_AMD_EXTENDED:
info->cmd_reset = AMD_CMD_RESET;
/* check if flash geometry needs reversal */
if (num_erase_regions <= 1)
break;
/* reverse geometry if top boot part */
if (info->cfi_version < 0x3131) {
/* CFI < 1.1, try to guess from device id */
if ((info->device_id & 0x80) != 0) {
geometry_reversed = 1;
}
break;
}
/* CFI >= 1.1, deduct from top/bottom flag */
/* note: ext_addr is valid since cfi_version > 0 */
if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
geometry_reversed = 1;
}
break;
}
debug ("manufacturer is %d\n", info->vendor);
debug ("manufacturer id is 0x%x\n", info->manufacturer_id);
debug ("device id is 0x%x\n", info->device_id);
debug ("device id2 is 0x%x\n", info->device_id2);
debug ("cfi version is 0x%04x\n", info->cfi_version);
size_ratio = info->portwidth / info->chipwidth;
/* if the chip is x8/x16 reduce the ratio by half */
if ((info->interface == FLASH_CFI_X8X16)
&& (info->chipwidth == FLASH_CFI_BY8)) {
size_ratio >>= 1;
}
num_erase_regions = flash_read_uchar (info, FLASH_OFFSET_NUM_ERASE_REGIONS);
debug ("size_ratio %d port %d bits chip %d bits\n",
size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH,
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
@ -1171,7 +1266,12 @@ ulong flash_get_size (ulong base, int banknum)
num_erase_regions, NUM_ERASE_REGIONS);
break;
}
tmp = flash_read_long (info, 0,
if (geometry_reversed)
tmp = flash_read_long (info, 0,
FLASH_OFFSET_ERASE_REGIONS +
(num_erase_regions - 1 - i) * 4);
else
tmp = flash_read_long (info, 0,
FLASH_OFFSET_ERASE_REGIONS +
i * 4);
erase_region_size =

10
drivers/nand/nand_base.c
View File

@ -838,9 +838,9 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
unsigned long timeo;
if (state == FL_ERASING)
timeo = CFG_HZ * 400;
timeo += (HZ * 400) / 1000;
else
timeo = CFG_HZ * 20;
timeo += (HZ * 20) / 1000;
if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
@ -852,8 +852,8 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
while (1) {
if (get_timer(0) > timeo) {
printf("Timeout!");
return 0;
}
return 0x01;
}
if (this->dev_ready) {
if (this->dev_ready(mtd))
@ -2408,7 +2408,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
}
if (!nand_flash_ids[i].name) {
#ifndef CFG_NAND_QUIET_TEST
printk (KERN_WARNING "No NAND device found!!!\n");
#endif
this->select_chip(mtd, -1);
return 1;
}

19
include/ACEX1K.h
View File

@ -35,6 +35,11 @@ extern int ACEX1K_dump( Altera_desc *desc, void *buf, size_t bsize );
extern int ACEX1K_info( Altera_desc *desc );
extern int ACEX1K_reloc( Altera_desc *desc, ulong reloc_off );
extern int CYC2_load( Altera_desc *desc, void *image, size_t size );
extern int CYC2_dump( Altera_desc *desc, void *buf, size_t bsize );
extern int CYC2_info( Altera_desc *desc );
extern int CYC2_reloc( Altera_desc *desc, ulong reloc_off );
/* Slave Serial Implementation function table */
typedef struct {
Altera_pre_fn pre;
@ -48,6 +53,18 @@ typedef struct {
int relocated;
} Altera_ACEX1K_Passive_Serial_fns;
/* Slave Serial Implementation function table */
typedef struct {
Altera_pre_fn pre;
Altera_config_fn config;
Altera_status_fn status;
Altera_done_fn done;
Altera_write_fn write;
Altera_abort_fn abort;
Altera_post_fn post;
int relocated;
} Altera_CYC2_Passive_Serial_fns;
/* Device Image Sizes
*********************************************************************/
/* ACEX1K */
@ -60,6 +77,8 @@ typedef struct {
#endif
#define Altera_EP1K100_SIZE (166965*8)
#define Altera_EP2C35_SIZE 883905
/* Descriptor Macros
*********************************************************************/
/* ACEX1K devices */

4
include/altera.h
View File

@ -34,8 +34,10 @@
/* Altera Model definitions
*********************************************************************/
#define CFG_ACEX1K CFG_FPGA_DEV( 0x1 )
#define CFG_CYCLON2 CFG_FPGA_DEV( 0x2 )
#define CFG_ALTERA_ACEX1K (CFG_FPGA_ALTERA | CFG_ACEX1K)
#define CFG_ALTERA_CYCLON2 (CFG_FPGA_ALTERA | CFG_CYCLON2)
/* Add new models here */
/* Altera Interface definitions
@ -56,6 +58,7 @@ typedef enum { /* typedef Altera_iface */
typedef enum { /* typedef Altera_Family */
min_altera_type, /* insert all new types after this */
Altera_ACEX1K, /* ACEX1K Family */
Altera_CYC2, /* CYCLONII Family */
/* Add new models here */
max_altera_type /* insert all new types before this */
} Altera_Family; /* end, typedef Altera_Family */
@ -84,6 +87,7 @@ typedef int (*Altera_status_fn)( int cookie );
typedef int (*Altera_done_fn)( int cookie );
typedef int (*Altera_clk_fn)( int assert_clk, int flush, int cookie );
typedef int (*Altera_data_fn)( int assert_data, int flush, int cookie );
typedef int (*Altera_write_fn)(void *buf, size_t len, int flush, int cookie);
typedef int (*Altera_abort_fn)( int cookie );
typedef int (*Altera_post_fn)( int cookie );

2
include/common.h
View File

@ -270,7 +270,7 @@ int misc_init_r (void);
void jumptable_init(void);
/* common/memsize.c */
int get_ram_size (volatile long *, long);
long get_ram_size (volatile long *, long);
/* $(BOARD)/$(BOARD).c */
void reset_phy (void);

46
include/configs/TQM5200.h
View File

@ -217,43 +217,19 @@
#undef CONFIG_BOOTARGS
#ifdef CONFIG_STK52XX
# if defined(CONFIG_TQM5200_B)
# if defined(CFG_LOWBOOT)
# define ENV_UPDT \
"update=protect off FC000000 FC07FFFF;" \
"erase FC000000 FC07FFFF;" \
"cp.b 200000 FC000000 ${filesize};" \
"protect on FC000000 FC07FFFF\0"
# else /* highboot */
# define ENV_UPDT \
"update=protect off FFF00000 FFF7FFFF;" \
"erase FFF00000 FFF7FFFF;" \
#if defined(CONFIG_TQM5200_B) && !defined(CFG_LOWBOOT)
# define ENV_UPDT \
"update=protect off FFF00000 +${filesize};" \
"erase FFF00000 +${filesize};" \
"cp.b 200000 FFF00000 ${filesize};" \
"protect on FFF00000 FFF7FFFF\0"
# endif /* CFG_LOWBOOT */
# else /* !CONFIG_TQM5200_B */
# define ENV_UPDT \
"update=protect off FC000000 FC05FFFF;" \
"erase FC000000 FC05FFFF;" \
"cp.b 200000 FC000000 ${filesize};" \
"protect on FC000000 FC05FFFF\0"
# endif /* CONFIG_TQM5200_B */
#elif defined (CONFIG_CAM5200)
"protect on FFF00000 +${filesize}\0"
#else /* default lowboot configuration */
# define ENV_UPDT \
"update=protect off FC000000 FC03FFFF;" \
"erase FC000000 FC03FFFF;" \
"update=protect off FC000000 +${filesize};" \
"erase FC000000 +${filesize};" \
"cp.b 200000 FC000000 ${filesize};" \
"protect on FC000000 FC03FFFF\0"
#elif defined (CONFIG_FO300)
# define ENV_UPDT \
"update=protect off FC000000 FC05FFFF;" \
"erase FC000000 FC05FFFF;" \
"cp.b 200000 FC000000 ${filesize};" \
"protect on FC000000 FC05FFFF\0"
#else
# error "Unknown Carrier Board"
#endif /* CONFIG_STK52XX */
"protect on FC000000 +${filesize}\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
@ -432,7 +408,7 @@
*/
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */
#if defined(CONFIG_TQM5200_B)
#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200)
#define CFG_ENV_SECT_SIZE 0x40000
#else
#define CFG_ENV_SECT_SIZE 0x20000

346
include/configs/alpr.h Normal file
View File

@ -0,0 +1,346 @@
/*
* (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
#define CONFIG_ALPR 1 /* Board is ebony */
#define CONFIG_440GX 1 /* Specifc GX support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xffe00000 /* start of FLASH */
#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
#define CFG_PCI_MEMSIZE 0x40000000 /* size of mapped pci memory */
#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08300000)
#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in internal SRAM)
*----------------------------------------------------------------------*/
#define CFG_TEMP_STACK_OCM 1
#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#undef CFG_EXT_SERIAL_CLOCK
#define CONFIG_BAUDRATE 115200
#define CONFIG_UART1_CONSOLE /* define for uart1 as console */
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
#define CFG_FLASH_CFI 1 /* The flash is CFI compatible */
#define CFG_FLASH_CFI_DRIVER 1 /* Use common CFI driver */
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0 */
#undef CONFIG_SDRAM_ECC /* enable ECC support */
#define CFG_SDRAM_TABLE { \
{(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \
{(64 << 20), 12, 0x00082001}} /* 64MB mode 2, 12x9(4) */
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
/*-----------------------------------------------------------------------
* I2C EEPROM (PCF8594C)
*----------------------------------------------------------------------*/
#define CFG_I2C_EEPROM_ADDR 0x54 /* EEPROM PCF8594C */
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
/* mask of address bits that overflow into the "EEPROM chip address" */
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* The Philips PCF8594C has */
/* 8 byte page write mode using */
/* last 3 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 40 /* and takes up to 40 msec */
#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth3\0" \
"hostname=alpr\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate} " \
"mem=193M\0" \
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/projects/alpr/nfs_root\0" \
"bootfile=/alpr/uImage\0" \
"kernel_addr=fff00000\0" \
"ramdisk_addr=fff10000\0" \
"load=tftp 100000 /alpr/u-boot/u-boot.bin\0" \
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
"cp.b 100000 fffc0000 40000;" \
"setenv filesize;saveenv\0" \
"upd=run load;run update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_NET_MULTI 1
#define CONFIG_PHY_ADDR 0x02 /* dummy setting, no EMAC0 used */
#define CONFIG_PHY1_ADDR 0x03 /* dummy setting, no EMAC1 used */
#define CONFIG_PHY2_ADDR 0x01 /* PHY address for EMAC2 */
#define CONFIG_PHY3_ADDR 0x02 /* PHY address for EMAC3 */
#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_HAS_ETH2
#define CONFIG_HAS_ETH3
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
#define CONFIG_M88E1111_PHY 1 /* needed for PHY specific setup*/
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_FPGA | \
CFG_CMD_NAND | \
CFG_CMD_REGINFO)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
#define CONFIG_PCI_BOOTDELAY 1 /* enable pci bootdelay variable*/
/* Board-specific PCI */
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
#define CFG_PCI_MASTER_INIT
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
/*-----------------------------------------------------------------------
* FPGA stuff
*-----------------------------------------------------------------------*/
#define CONFIG_FPGA CFG_ALTERA_CYCLON2
#define CFG_FPGA_CHECK_CTRLC
#define CFG_FPGA_PROG_FEEDBACK
#define CONFIG_FPGA_COUNT 1 /* Ich habe 2 ... aber in
Reihe geschaltet -> sollte gehen,
aufpassen mit Datasize ist jetzt
halt doppelt so gross ... Seite 306
ist das mit den multiple Device in PS
Mode erklaert ...*/
/* FPGA program pin configuration */
#define CFG_GPIO_CLK 18 /* FPGA clk pin (cpu output) */
#define CFG_GPIO_DATA 19 /* FPGA data pin (cpu output) */
#define CFG_GPIO_STATUS 20 /* FPGA status pin (cpu input) */
#define CFG_GPIO_CONFIG 21 /* FPGA CONFIG pin (cpu output) */
#define CFG_GPIO_CON_DON 22 /* FPGA CONFIG_DONE pin (cpu input) */
#define CFG_GPIO_SEL_DPR 14 /* cpu output */
#define CFG_GPIO_SEL_AVR 15 /* cpu output */
#define CFG_GPIO_PROG_EN 23 /* cpu output */
/*-----------------------------------------------------------------------
* Definitions for GPIO setup
*-----------------------------------------------------------------------*/
#define CFG_GPIO_EREADY (0x80000000 >> 26)
#define CFG_GPIO_REV0 (0x80000000 >> 14)
#define CFG_GPIO_REV1 (0x80000000 >> 15)
/*-----------------------------------------------------------------------
* NAND-FLASH stuff
*-----------------------------------------------------------------------*/
#define CFG_MAX_NAND_DEVICE 4
#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE
#define CFG_NAND_BASE 0xF0000000 /* NAND FLASH Base Address */
#define CFG_NAND_BASE_LIST { CFG_NAND_BASE + 0, CFG_NAND_BASE + 2, \
CFG_NAND_BASE + 4, CFG_NAND_BASE + 6 }
#define CFG_NAND_QUIET_TEST 1 /* don't warn upon unknown NAND flash */
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
#define CFG_FLASH CFG_FLASH_BASE
/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */
#define CFG_EBC_PB0AP 0x92015480
#define CFG_EBC_PB0CR (CFG_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */
/* Memory Bank 1 (NAND-FLASH) initialization */
#define CFG_EBC_PB1AP 0x01840380 /* TWT=3 */
#define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x18000) /* BS=1MB,BU=R/W,BW=8bit */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
#endif /* __CONFIG_H */

13
include/configs/sequoia.h
View File

@ -53,7 +53,7 @@
#define CFG_BOOT_BASE_ADDR 0xf0000000
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */
#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */
#define CFG_OCM_BASE 0xe0010000 /* ocm */
@ -102,6 +102,7 @@
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
/*-----------------------------------------------------------------------
@ -234,10 +235,10 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"rootpath=/opt/eldk/ppc_4xxFP\0" \
"bootfile=/tftpboot/sequoia/uImage\0" \
"kernel_addr=FE000000\0" \
"ramdisk_addr=FE180000\0" \
"kernel_addr=FC000000\0" \
"ramdisk_addr=FC180000\0" \
"load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0" \
"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
"cp.b 100000 FFFA0000 60000\0" \
@ -378,7 +379,7 @@
#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
/* Memory Bank 0 (NOR-FLASH) initialization */
#define CFG_EBC_PB0AP 0x03017300
#define CFG_EBC_PB0CR (CFG_FLASH | 0xba000)
#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000)
/* Memory Bank 3 (NAND-FLASH) initialization */
#define CFG_EBC_PB3AP 0x018003c0
@ -387,7 +388,7 @@
#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
/* Memory Bank 3 (NOR-FLASH) initialization */
#define CFG_EBC_PB3AP 0x03017300
#define CFG_EBC_PB3CR (CFG_FLASH | 0xba000)
#define CFG_EBC_PB3CR (CFG_FLASH | 0xda000)
/* Memory Bank 0 (NAND-FLASH) initialization */
#define CFG_EBC_PB0AP 0x018003c0

4
include/configs/v38b.h
View File

@ -34,7 +34,7 @@
#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */
#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */
#define CONFIG_HW_WATCHDOG 1 /* has watchdog */
#undef CONFIG_HW_WATCHDOG /* don't use watchdog */
#define CONFIG_NETCONSOLE 1
@ -246,7 +246,7 @@
/*
* GPIO configuration
*/
#define CFG_GPS_PORT_CONFIG 0x90000404
#define CFG_GPS_PORT_CONFIG 0x90001404
/*
* Miscellaneous configurable options

1
include/configs/yellowstone.h
View File

@ -37,6 +37,7 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
#define CONFIG_BOARD_RESET 1 /* call board_reset() */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the

1
include/configs/yosemite.h
View File

@ -37,6 +37,7 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
#define CONFIG_BOARD_RESET 1 /* call board_reset() */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the

3
include/environment.h
View File

@ -79,8 +79,7 @@
# ifdef CFG_ENV_OFFSET_REDUND
# define CFG_REDUNDAND_ENVIRONMENT
# endif
# if defined(CONFIG_NAND_U_BOOT)
/* Use embedded environment in NAND boot versions */
# ifdef CFG_ENV_IS_EMBEDDED
# define ENV_IS_EMBEDDED 1
# endif
#endif /* CFG_ENV_IS_IN_NAND */

8
include/flash.h
View File

@ -43,9 +43,14 @@ typedef struct {
ulong write_tout; /* maximum write timeout */
ulong buffer_write_tout; /* maximum buffer write timeout */
ushort vendor; /* the primary vendor id */
ushort cmd_reset; /* Vendor specific reset command */
ushort cmd_reset; /* vendor specific reset command */
ushort interface; /* used for x8/x16 adjustments */
ushort legacy_unlock; /* support Intel legacy (un)locking */
uchar manufacturer_id; /* manufacturer id */
ushort device_id; /* device id */
ushort device_id2; /* extended device id */
ushort ext_addr; /* extended query table address */
ushort cfi_version; /* cfi version */
#endif
} flash_info_t;
@ -439,6 +444,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of
#define FLASH_MAN_MT 0x00400000
#define FLASH_MAN_SHARP 0x00500000
#define FLASH_MAN_ATM 0x00600000
#define FLASH_MAN_CFI 0x01000000
#define FLASH_TYPEMASK 0x0000FFFF /* extract FLASH type information */

2
include/ppc440.h
View File

@ -3183,7 +3183,7 @@
#define GPIO0 0
#define GPIO1 1
#if defined(CONFIG_440GP)
#if defined(CONFIG_440GP) || defined(CONFIG_440GX)
#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000700)
#define GPIO0_OR (GPIO0_BASE+0x0)