diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 339904b84f..a650554938 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -37,6 +37,7 @@ F:	configs/Orangepi_mini_defconfig
 F:	configs/qt840a_defconfig
 F:	configs/Wits_Pro_A20_DKT_defconfig
 F:	include/configs/sun8i.h
+F:	configs/ga10h_v1_1_defconfig
 F:	configs/Ippo_q8h_v1_2_defconfig
 F:	configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
 
diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig
new file mode 100644
index 0000000000..3eca0237f3
--- /dev/null
+++ b/configs/ga10h_v1_1_defconfig
@@ -0,0 +1,29 @@
+# The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand,
+# sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot.
+#
+# This defconfig is for the v1.1 pcb with an a33 soc.
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600"
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_AXP_GPIO=y
+CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_PANEL_LVDS=y
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_POWER="PH7"
+CONFIG_VIDEO_LCD_BL_EN="PH6"
+CONFIG_VIDEO_LCD_BL_PWM="PH0"
+#CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A33=y
+CONFIG_DRAM_CLK=432
+# zq = 0x3bbb
+CONFIG_DRAM_ZQ=15291
+CONFIG_DRAM_ODT_EN=y
+# Wifi power
+CONFIG_AXP221_DLDO1_VOLT=3300
+# aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP
+CONFIG_AXP221_ALDO1_VOLT=3000