gpio: Move OMAP_GPIO to Kconfig

This driver is used often enough such that we want to have this enabled by default on any ARCH_OMAP2PLUS board, and this only compiles on ARCH_OMAP2PLUS due to required defines, so mark that as the depends. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-12 22:33:21 -04:00 · 2017-05-12 22:33:21 -04:00 · 29cb2b3b90
commit 29cb2b3b90
parent bdf10677a9
18 changed files with 8 additions and 35 deletions
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@ -95,6 +95,14 @@ config MSM_GPIO
 	  - APQ8016
 	  - MSM8916

+config OMAP_GPIO
+	bool "TI OMAP GPIO driver"
+	depends on ARCH_OMAP2PLUS
+	default y
+	help
+	  Support GPIO controllers on the TI OMAP3/4/5 and related (such as
+	  AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
+
 config PM8916_GPIO
 	bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
 	depends on DM_GPIO && PMIC_PM8916
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@ -45,9 +45,6 @@

 /* Hardware drivers */

-/* OMAP GPIO configuration */
-#define CONFIG_OMAP_GPIO
-
 /* NS16550 Configuration */
 #define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
 #define CONFIG_SYS_NS16550_SERIAL
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@ -75,8 +75,6 @@
 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_SYS_I2C_OMAP24XX
-/* GPIO */
-#define CONFIG_OMAP_GPIO

 /*
 * Our platforms make use of SPL to initalize the hardware (primarily
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@ -22,7 +22,6 @@
 /*
 * High Level Configuration Options
 */
-#define CONFIG_OMAP_GPIO
 #define CONFIG_CM_T3X	/* working with CM-T35 and CM-T3730 */

 #define CONFIG_SDRC	/* The chip has SDRC controller */
--- a/include/configs/cm_t3517.h
+++ b/include/configs/cm_t3517.h
@ -79,8 +79,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}

-#define CONFIG_OMAP_GPIO
-
 /* USB */
 #define CONFIG_USB_MUSB_AM35X

--- a/include/configs/kc1.h
+++ b/include/configs/kc1.h
@ -53,12 +53,6 @@

 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024 + CONFIG_ENV_SIZE)

-/*
- * GPIO
- */
-
-#define CONFIG_OMAP_GPIO
-
 /*
 * I2C
 */
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@ -12,7 +12,6 @@
 /*
 * High Level Configuration Options
 */
-#define CONFIG_OMAP_GPIO

 #define CONFIG_MACH_TYPE	MACH_TYPE_MCX

--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@ -125,7 +125,6 @@
 #define CONFIG_TWL4030_LED
 #define CONFIG_TWL4030_KEYPAD

-#define CONFIG_OMAP_GPIO
 #define GPIO_SLIDE			71

 /*
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@ -83,7 +83,6 @@
 /*
 * High level configuration options
 */
-#define CONFIG_OMAP_GPIO

 #define CONFIG_SDRC			/* The chip has SDRC controller */

--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@ -547,10 +547,6 @@
 #endif
 #endif

-#define CONFIG_OMAP_GPIO
-
-/* Gpio cmd support */
-
 /* Watchdog */
 #define CONFIG_HW_WATCHDOG

--- a/include/configs/sniper.h
+++ b/include/configs/sniper.h
@ -58,8 +58,6 @@
 /*
 * GPIO
 */
-
-#define CONFIG_OMAP_GPIO
 #define CONFIG_OMAP3_GPIO_2
 #define CONFIG_OMAP3_GPIO_3
 #define CONFIG_OMAP3_GPIO_4
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@ -13,7 +13,6 @@
 /*
 * High Level Configuration Options
 */
-#define CONFIG_OMAP_GPIO

 #define CONFIG_SYS_TEXT_BASE 0x80008000

--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@ -16,7 +16,6 @@
 /*
 * High Level Configuration Options
 */
-#define CONFIG_OMAP_GPIO

 #define CONFIG_SDRC			/* Has an SDRC controller */

--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@ -109,8 +109,6 @@

 #define CONFIG_SYS_LOAD_ADDR		0x81000000	/* Default */

-#define CONFIG_OMAP_GPIO
-
 /**
 * Physical Memory Map
 */
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@ -49,7 +49,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */

 #define CONFIG_CMD_ASKENV
-#define CONFIG_OMAP_GPIO

 #define CONFIG_FS_FAT

--- a/include/configs/ti_armv7_omap.h
+++ b/include/configs/ti_armv7_omap.h
@ -20,9 +20,6 @@
 /* SPI IP Block */
 #define CONFIG_OMAP3_SPI

-/* GPIO block */
-#define CONFIG_OMAP_GPIO
-
 /*
 * GPMC NAND block.  We support 1 device and the physical address to
 * access CS0 at is 0x8000000.
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@ -46,9 +46,6 @@

 /* Hardware drivers */

-/* GPIO support */
-#define CONFIG_OMAP_GPIO
-
 /* GPIO banks */
 #define CONFIG_OMAP3_GPIO_2		/* GPIO32..63 are in GPIO bank 2 */

--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@ -1990,7 +1990,6 @@ CONFIG_OMAP3_SPI_D0_D1_SWAPPED
 CONFIG_OMAP_EHCI_PHY1_RESET_GPIO
 CONFIG_OMAP_EHCI_PHY2_RESET_GPIO
 CONFIG_OMAP_EHCI_PHY3_RESET_GPIO
-CONFIG_OMAP_GPIO
 CONFIG_OMAP_USB2PHY2_HOST
 CONFIG_OMAP_USB3PHY1_HOST
 CONFIG_OMAP_USB_PHY