fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA

The patch does sed 's/SPL_FPGA_SUPPORT/SPL_FPGA/g' but also fixing Makefile
and zynqmp.c to simplify if/endif logic in zynqmp.c.

This change is mostly done to be able to use CONFIG_IS_ENABLED macro and
obj-$(CONFIG_$(SPL_)FPGA) in Makefile. For them symbols need to be in sync.

And removing one line from Topic Miami boards which is not needed because
symbol is not enabled via Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Michal Simek 2020-09-09 14:41:56 +02:00
parent b7d4518eed
commit 29bd8ada52
9 changed files with 11 additions and 20 deletions

View File

@ -17,8 +17,7 @@
#define ZYNQ_SILICON_VER_MASK 0xF0000000
#define ZYNQ_SILICON_VER_SHIFT 28
#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
#if CONFIG_IS_ENABLED(FPGA)
xilinx_desc fpga = {
.family = xilinx_zynq,
.iface = devcfg,
@ -111,8 +110,7 @@ static int __maybe_unused cpu_desc_id(void)
#if defined(CONFIG_ARCH_EARLY_INIT_R)
int arch_early_init_r(void)
{
#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
#if CONFIG_IS_ENABLED(FPGA)
int cpu_id = cpu_desc_id();
if (cpu_id < 0)

View File

@ -34,7 +34,7 @@ void board_init_f(ulong dummy)
void spl_board_init(void)
{
preloader_console_init();
#if defined(CONFIG_ARCH_EARLY_INIT_R) && defined(CONFIG_SPL_FPGA_SUPPORT)
#if defined(CONFIG_ARCH_EARLY_INIT_R) && defined(CONFIG_SPL_FPGA)
arch_early_init_r();
#endif
board_init();

View File

@ -49,10 +49,7 @@
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
!defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_FPGA_SUPPORT) && \
defined(CONFIG_SPL_BUILD))
#if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL)
static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC;
enum {
@ -331,9 +328,7 @@ int board_init(void)
/* Bug in ROM sets wrong value in this register */
writel(PS_SYSMON_ANALOG_BUS_VAL, PS_SYSMON_ANALOG_BUS_REG);
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
!defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_FPGA_SUPPORT) && \
defined(CONFIG_SPL_BUILD))
#if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL)
zynqmppl.name = zynqmp_get_silicon_idcode_name();
printf("Chip ID:\t%s\n", zynqmppl.name);
fpga_init();

View File

@ -602,7 +602,7 @@ config SPL_FAT_WRITE
Support for the underlying block device (e.g. MMC or USB) must be
enabled separately.
config SPL_FPGA_SUPPORT
config SPL_FPGA
bool "Support FPGAs"
help
Enable support for FPGAs in SPL. Field-programmable Gate Arrays

View File

@ -253,7 +253,7 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
const void *data;
bool external_data = false;
if (IS_ENABLED(CONFIG_SPL_FPGA_SUPPORT) ||
if (IS_ENABLED(CONFIG_SPL_FPGA) ||
(IS_ENABLED(CONFIG_SPL_OS_BOOT) && IS_ENABLED(CONFIG_SPL_GZIP))) {
if (fit_image_get_type(fit, node, &type))
puts("Cannot get image type.\n");
@ -546,7 +546,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
return -1;
}
#ifdef CONFIG_SPL_FPGA_SUPPORT
#ifdef CONFIG_SPL_FPGA
node = spl_fit_get_image_node(fit, images, "fpga", 0);
if (node >= 0) {
/* Load the image and set up the spl_image structure */

View File

@ -23,7 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb"
CONFIG_VERSION_VARIABLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_FPGA_SUPPORT=y
CONFIG_SPL_FPGA=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
# CONFIG_CMD_FLASH is not set

View File

@ -20,7 +20,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_USE_PREBOOT=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_FPGA_SUPPORT=y
CONFIG_SPL_FPGA=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_SPI_LOAD=y
# CONFIG_BOOTM_NETBSD is not set

View File

@ -30,6 +30,7 @@ obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += power/acpi_pmc/
obj-$(CONFIG_$(SPL_)BOARD) += board/
obj-$(CONFIG_XEN) += xen/
obj-$(CONFIG_$(SPL_)FPGA) += fpga/
ifndef CONFIG_TPL_BUILD
ifdef CONFIG_SPL_BUILD
@ -60,7 +61,6 @@ obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
obj-$(CONFIG_SPL_THERMAL) += thermal/
endif
@ -85,7 +85,6 @@ obj-y += cache/
obj-$(CONFIG_CPU) += cpu/
obj-y += crypto/
obj-$(CONFIG_FASTBOOT) += fastboot/
obj-$(CONFIG_FPGA) += fpga/
obj-y += misc/
obj-$(CONFIG_MMC) += mmc/
obj-$(CONFIG_NVME) += nvme/

View File

@ -24,7 +24,6 @@
/* No falcon support */
#undef CONFIG_SPL_OS_BOOT
#undef CONFIG_SPL_FPGA_SUPPORT
/* FPGA commands that we don't use */