ARM: uniphier: dts: sync with Linux 4.20

Currently, the DWC3 USB node is out of sync because the bindings
for the UniPhier DWC3 PHY diverged between Linux and U-Boot.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

arch/arm/dts/uniphier-ld11.dtsi

@@ -116,6 +116,28 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -432,6 +454,8 @@
 				 <&mio_clk 12>;
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
 				 <&mio_rst 12>;
+			phy-names = "usb";
+			phys = <&usb_phy0>;
 			has-transaction-translator;
 		};
 
@@ -446,6 +470,8 @@
 				 <&mio_clk 13>;
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
 				 <&mio_rst 13>;
+			phy-names = "usb";
+			phys = <&usb_phy1>;
 			has-transaction-translator;
 		};
 
@@ -460,6 +486,8 @@
 				 <&mio_clk 14>;
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
 				 <&mio_rst 14>;
+			phy-names = "usb";
+			phys = <&usb_phy2>;
 			has-transaction-translator;
 		};
 
@@ -488,6 +516,27 @@
 			pinctrl: pinctrl {
 				compatible = "socionext,uniphier-ld11-pinctrl";
 			};
+
+			usb-phy {
+				compatible = "socionext,uniphier-ld11-usb2-phy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb_phy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <0>;
+				};
+			};
 		};
 
 		soc-glue@5f900000 {
@@ -571,7 +620,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};

arch/arm/dts/uniphier-ld20-global.dts

@@ -145,6 +145,10 @@
 	};
 };
 
+&usb {
+	status = "okay";
+};
+
 &nand {
 	status = "okay";
 };

arch/arm/dts/uniphier-ld20-ref.dts

@@ -75,3 +75,7 @@
 		drive-strength = <9>;
 	};
 };
+
+&usb {
+	status = "okay";
+};

arch/arm/dts/uniphier-ld20.dtsi

@@ -224,6 +224,50 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi2: spi@54006200 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006200 0x100>;
+			interrupts = <0 229 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi2>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi3: spi@54006300 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006300 0x100>;
+			interrupts = <0 230 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi3>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -567,6 +611,50 @@
 			efuse@200 {
 				compatible = "socionext,uniphier-efuse";
 				reg = <0x200 0x68>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* USB cells */
+				usb_rterm0: trim@54,4 {
+					reg = <0x54 1>;
+					bits = <4 2>;
+				};
+				usb_rterm1: trim@55,4 {
+					reg = <0x55 1>;
+					bits = <4 2>;
+				};
+				usb_rterm2: trim@58,4 {
+					reg = <0x58 1>;
+					bits = <4 2>;
+				};
+				usb_rterm3: trim@59,4 {
+					reg = <0x59 1>;
+					bits = <4 2>;
+				};
+				usb_sel_t0: trim@54,0 {
+					reg = <0x54 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t1: trim@55,0 {
+					reg = <0x55 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t2: trim@58,0 {
+					reg = <0x58 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t3: trim@59,0 {
+					reg = <0x59 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i0: trim@56,0 {
+					reg = <0x56 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i2: trim@5a,0 {
+					reg = <0x5a 1>;
+					bits = <0 4>;
+				};
 			};
 		};
 
@@ -634,6 +722,157 @@
 			};
 		};
 
+		_usb: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host";
+			interrupts = <0 134 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
+				    <&pinctrl_usb2>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+			resets = <&usb_rst 15>;
+			phys = <&usb_hsphy0>, <&usb_hsphy1>,
+			       <&usb_hsphy2>, <&usb_hsphy3>,
+			       <&usb_ssphy0>, <&usb_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-ld20-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb_rst: reset@0 {
+				compatible = "socionext,uniphier-ld20-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus2: regulator@120 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x120 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus3: regulator@130 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x130 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb_vbus0>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+					      <&usb_hs_i0>;
+			};
+
+			usb_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb_vbus1>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+					      <&usb_hs_i0>;
+			};
+
+			usb_hsphy2: hs-phy@220 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x220 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb_vbus2>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+					      <&usb_hs_i2>;
+			};
+
+			usb_hsphy3: hs-phy@230 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x230 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb_vbus3>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+					      <&usb_hs_i2>;
+			};
+
+			usb_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-ld20-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 18>;
+				vbus-supply = <&usb_vbus0>;
+			};
+
+			usb_ssphy1: ss-phy@310 {
+				compatible = "socionext,uniphier-ld20-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 19>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 19>;
+				vbus-supply = <&usb_vbus1>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
 		usb: usb@65b00000 {
 			compatible = "socionext,uniphier-ld20-dwc3";
 			reg = <0x65b00000 0x1000>;
@@ -660,7 +899,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};

arch/arm/dts/uniphier-ld4.dtsi

@@ -63,6 +63,17 @@
 			cache-level = <2>;
 		};
 
+		spi: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -381,7 +392,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand2cs>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};

arch/arm/dts/uniphier-pinctrl.dtsi

@@ -131,6 +131,26 @@
 		function = "sd1";
 	};
 
+	pinctrl_spi0: spi0 {
+		groups = "spi0";
+		function = "spi0";
+	};
+
+	pinctrl_spi1: spi1 {
+		groups = "spi1";
+		function = "spi1";
+	};
+
+	pinctrl_spi2: spi2 {
+		groups = "spi2";
+		function = "spi2";
+	};
+
+	pinctrl_spi3: spi3 {
+		groups = "spi3";
+		function = "spi3";
+	};
+
 	pinctrl_system_bus: system-bus {
 		groups = "system_bus", "system_bus_cs1";
 		function = "system_bus";

arch/arm/dts/uniphier-pro4-ace.dts

@@ -73,11 +73,11 @@
 	status = "okay";
 };
 
-&usb0 {
+&usb2 {
 	status = "okay";
 };
 
-&usb1 {
+&usb3 {
 	status = "okay";
 };
 
@@ -92,10 +92,10 @@
 	};
 };
 
-&usb2 {
+&usb0 {
 	status = "okay";
 };
 
-&usb3 {
+&usb1 {
 	status = "okay";
 };

arch/arm/dts/uniphier-pro4-sanji.dts

@@ -68,11 +68,11 @@
 	status = "okay";
 };
 
-&usb0 {
+&usb2 {
 	status = "okay";
 };
 
-&usb1 {
+&usb3 {
 	status = "okay";
 };
 
@@ -87,10 +87,10 @@
 	};
 };
 
-&usb2 {
+&usb0 {
 	status = "okay";
 };
 
-&usb3 {
+&usb1 {
 	status = "okay";
 };

arch/arm/dts/uniphier-pro4.dtsi

@@ -71,6 +71,17 @@
 			cache-level = <2>;
 		};
 
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -317,6 +328,8 @@
 				 <&mio_clk 12>;
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
 				 <&mio_rst 12>;
+			phy-names = "usb";
+			phys = <&usb_phy0>;
 			has-transaction-translator;
 		};
 
@@ -331,6 +344,8 @@
 				 <&mio_clk 13>;
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
 				 <&mio_rst 13>;
+			phy-names = "usb";
+			phys = <&usb_phy1>;
 			has-transaction-translator;
 		};
 
@@ -342,6 +357,34 @@
 			pinctrl: pinctrl {
 				compatible = "socionext,uniphier-pro4-pinctrl";
 			};
+
+			usb-phy {
+				compatible = "socionext,uniphier-pro4-usb2-phy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb_phy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <0>;
+					vbus-supply = <&usb0_vbus>;
+				};
+
+				usb_phy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <0>;
+					vbus-supply = <&usb1_vbus>;
+				};
+			};
 		};
 
 		soc-glue@5f900000 {
@@ -434,6 +477,60 @@
 			};
 		};
 
+		_usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 134 4>, <0 135 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 4>;
+			phys = <&usb_phy2>, <&usb0_ssphy>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x100>;
+
+			usb0_vbus: regulator@0 {
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
+				reg = <0 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_ssphy: ss-phy@10 {
+				compatible = "socionext,uniphier-pro4-usb3-ssphy";
+				reg = <0x10 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus>;
+			};
+
+			usb0_rst: reset@40 {
+				compatible = "socionext,uniphier-pro4-usb3-reset";
+				reg = <0x40 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
 		usb0: usb@65b00000 {
 			compatible = "socionext,uniphier-pro4-dwc3";
 			status = "disabled";
@@ -452,6 +549,49 @@
 			};
 		};
 
+		_usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 137 4>, <0 138 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb1_rst 4>;
+			phys = <&usb_phy3>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x100>;
+
+			usb1_vbus: regulator@0 {
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
+				reg = <0 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_rst: reset@40 {
+				compatible = "socionext,uniphier-pro4-usb3-reset";
+				reg = <0x40 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
 		usb1: usb@65d00000 {
 			compatible = "socionext,uniphier-pro4-dwc3";
 			status = "disabled";
@@ -478,7 +618,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};

arch/arm/dts/uniphier-pro5.dtsi

@@ -156,6 +156,28 @@
 			cache-level = <3>;
 		};
 
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -475,7 +497,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand2cs>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 

arch/arm/dts/uniphier-pxs2.dtsi

@@ -167,6 +167,28 @@
 			cache-level = <2>;
 		};
 
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -557,6 +579,103 @@
 			};
 		};
 
+		_usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 134 4>, <0 135 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+			       <&usb0_ssphy0>, <&usb0_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs2-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+
+			usb0_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy1: ss-phy@310 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 18>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
 		usb0: usb@65b00000 {
 			compatible = "socionext,uniphier-pxs2-dwc3";
 			status = "disabled";
@@ -575,6 +694,91 @@
 			};
 		};
 
+		_usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 137 4>, <0 138 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs2-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 20>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+
+			usb1_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 20>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus1>;
+			};
+
+			usb1_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 21>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 21>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
 		usb1: usb@65d00000 {
 			compatible = "socionext,uniphier-pxs2-dwc3";
 			status = "disabled";
@@ -601,7 +805,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand2cs>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};

arch/arm/dts/uniphier-pxs3.dtsi

@@ -144,6 +144,28 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -384,6 +406,50 @@
 			efuse@200 {
 				compatible = "socionext,uniphier-efuse";
 				reg = <0x200 0x68>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* USB cells */
+				usb_rterm0: trim@54,4 {
+					reg = <0x54 1>;
+					bits = <4 2>;
+				};
+				usb_rterm1: trim@55,4 {
+					reg = <0x55 1>;
+					bits = <4 2>;
+				};
+				usb_rterm2: trim@58,4 {
+					reg = <0x58 1>;
+					bits = <4 2>;
+				};
+				usb_rterm3: trim@59,4 {
+					reg = <0x59 1>;
+					bits = <4 2>;
+				};
+				usb_sel_t0: trim@54,0 {
+					reg = <0x54 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t1: trim@55,0 {
+					reg = <0x55 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t2: trim@58,0 {
+					reg = <0x58 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t3: trim@59,0 {
+					reg = <0x59 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i0: trim@56,0 {
+					reg = <0x56 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i2: trim@5a,0 {
+					reg = <0x5a 1>;
+					bits = <0 4>;
+				};
 			};
 		};
 
@@ -465,6 +531,109 @@
 			};
 		};
 
+		_usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 134 4>, <0 135 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+			       <&usb0_ssphy0>, <&usb0_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pxs3-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs3-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 12>;
+				reset-names = "link";
+				resets = <&sys_rst 12>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 12>;
+				reset-names = "link";
+				resets = <&sys_rst 12>;
+			};
+
+			usb0_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 12>;
+				reset-names = "link";
+				resets = <&sys_rst 12>;
+			};
+
+			usb0_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus0>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+					      <&usb_hs_i0>;
+			};
+
+			usb0_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus1>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+					      <&usb_hs_i0>;
+			};
+
+			usb0_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 17>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy1: ss-phy@310 {
+				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 18>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
 		usb0: usb@65b00000 {
 			compatible = "socionext,uniphier-pxs3-dwc3";
 			status = "disabled";
@@ -483,6 +652,101 @@
 			};
 		};
 
+		_usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 137 4>, <0 138 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>,
+			       <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pxs3-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs3-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 13>;
+				reset-names = "link";
+				resets = <&sys_rst 13>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 13>;
+				reset-names = "link";
+				resets = <&sys_rst 13>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 13>;
+				reset-names = "link";
+				resets = <&sys_rst 13>;
+			};
+
+			usb1_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy", "phy-ext";
+				clocks = <&sys_clk 13>, <&sys_clk 20>,
+					 <&sys_clk 14>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 13>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus0>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+					      <&usb_hs_i2>;
+			};
+
+			usb1_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy", "phy-ext";
+				clocks = <&sys_clk 13>, <&sys_clk 20>,
+					 <&sys_clk 14>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 13>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus1>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+					      <&usb_hs_i2>;
+			};
+
+			usb1_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy", "phy-ext";
+				clocks = <&sys_clk 13>, <&sys_clk 21>,
+					 <&sys_clk 14>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 13>, <&sys_rst 21>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
+		/* FIXME: U-Boot own node */
 		usb1: usb@65d00000 {
 			compatible = "socionext,uniphier-pxs3-dwc3";
 			status = "disabled";
@@ -509,7 +773,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};

arch/arm/dts/uniphier-sld8.dtsi

@@ -63,6 +63,17 @@
 			cache-level = <2>;
 		};
 
+		spi: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -385,7 +396,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand2cs>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};