leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

Browse Source
This commit is contained in:
Tom Rini 2018-07-17 14:28:47 -04:00
commit 1adbf2966a
52 changed files with 3900 additions and 970 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
arch/arm/dts/Makefile
View File

@ -392,7 +392,8 @@ dtb-$(CONFIG_MACH_SUN50I) += \
sun50i-a64-olinuxino.dtb \
sun50i-a64-orangepi-win.dtb \
sun50i-a64-pine64-plus.dtb \
sun50i-a64-pine64.dtb
sun50i-a64-pine64.dtb \
sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb \

155
arch/arm/dts/axp803.dtsi Normal file
View File

@ -0,0 +1,155 @@
/*
* Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* AXP803 Integrated Power Management Chip
* http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
*/
&axp803 {
interrupt-controller;
#interrupt-cells = <1>;
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <3000>;
reg_aldo1: aldo1 {
regulator-name = "aldo1";
};
reg_aldo2: aldo2 {
regulator-name = "aldo2";
};
reg_aldo3: aldo3 {
regulator-name = "aldo3";
};
reg_dc1sw: dc1sw {
regulator-name = "dc1sw";
};
reg_dcdc1: dcdc1 {
regulator-name = "dcdc1";
};
reg_dcdc2: dcdc2 {
regulator-name = "dcdc2";
};
reg_dcdc3: dcdc3 {
regulator-name = "dcdc3";
};
reg_dcdc4: dcdc4 {
regulator-name = "dcdc4";
};
reg_dcdc5: dcdc5 {
regulator-name = "dcdc5";
};
reg_dcdc6: dcdc6 {
regulator-name = "dcdc6";
};
reg_dldo1: dldo1 {
regulator-name = "dldo1";
};
reg_dldo2: dldo2 {
regulator-name = "dldo2";
};
reg_dldo3: dldo3 {
regulator-name = "dldo3";
};
reg_dldo4: dldo4 {
regulator-name = "dldo4";
};
reg_eldo1: eldo1 {
regulator-name = "eldo1";
};
reg_eldo2: eldo2 {
regulator-name = "eldo2";
};
reg_eldo3: eldo3 {
regulator-name = "eldo3";
};
reg_fldo1: fldo1 {
regulator-name = "fldo1";
};
reg_fldo2: fldo2 {
regulator-name = "fldo2";
};
reg_ldo_io0: ldo-io0 {
regulator-name = "ldo-io0";
status = "disabled";
};
reg_ldo_io1: ldo-io1 {
regulator-name = "ldo-io1";
status = "disabled";
};
reg_rtc_ldo: rtc-ldo {
/* RTC_LDO is a fixed, always-on regulator */
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "rtc-ldo";
};
reg_drivevbus: drivevbus {
regulator-name = "drivevbus";
status = "disabled";
};
};
};

195
arch/arm/dts/sun50i-a64-bananapi-m64.dts
View File

@ -1,6 +1,5 @@
/*
* Copyright (c) 2016 ARM Ltd.
* Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@ -52,6 +51,7 @@
compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
serial1 = &uart1;
};
@ -60,11 +60,29 @@
stdout-path = "serial0:115200n8";
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
leds {
compatible = "gpio-leds";
pwr-led {
label = "bananapi-m64:red:pwr";
gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
default-state = "on";
};
green {
label = "bananapi-m64:green:user";
gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */
};
blue {
label = "bananapi-m64:blue:user";
gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
};
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
@ -76,6 +94,15 @@
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dc1sw>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@ -86,12 +113,18 @@
bias-pull-up;
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
disable-wp;
bus-width = <4>;
status = "okay";
@ -100,16 +133,26 @@
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_vcc3v3>;
vmmc-supply = <&reg_dldo2>;
vqmmc-supply = <&reg_dldo4>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&r_pio>;
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
interrupt-names = "host-wake";
};
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_vcc3v3>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
@ -124,6 +167,135 @@
status = "okay";
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
};
};
#include "axp803.dtsi"
&reg_aldo1 {
/*
* This regulator also drives the PE pingroup GPIOs,
* which also controls two LEDs.
*/
regulator-always-on;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "afvcc-csi";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dc1sw {
/*
* This regulator also indirectly drives the PD pingroup GPIOs,
* which also controls the power LED.
*/
regulator-always-on;
regulator-name = "vcc-phy";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi-dsi";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_dldo4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-io";
};
&reg_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
@ -143,5 +315,6 @@
&usbphy {
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
usb0_vbus-supply = <&reg_drivevbus>;
status = "okay";
};

111
arch/arm/dts/sun50i-a64-nanopi-a64.dts
View File

@ -57,13 +57,6 @@
chosen {
stdout-path = "serial0:115200n8";
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&ehci0 {
@ -88,9 +81,8 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
disable-wp;
bus-width = <4>;
status = "okay";
@ -104,6 +96,105 @@
status = "okay";
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp803.dtsi"
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi-dsi";
};
&reg_dldo4 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pg-wifi-io";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;

153
arch/arm/dts/sun50i-a64-olinuxino.dts
View File

@ -58,25 +58,162 @@
stdout-path = "serial0:115200n8";
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
disable-wp;
bus-width = <4>;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_aldo2>;
vqmmc-supply = <&reg_dldo4>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
rtl8723bs: wifi@1 {
reg = <1>;
interrupt-parent = <&r_pio>;
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
interrupt-names = "host-wake";
};
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp803.dtsi"
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vcc-pe";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-ddr3";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-mipi";
};
&reg_dldo3 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vcc-avdd-csi";
};
&reg_dldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-io";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_eldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-dvdd-csi";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;

135
arch/arm/dts/sun50i-a64-orangepi-win.dts
View File

@ -57,30 +57,138 @@
chosen {
stdout-path = "serial0:115200n8";
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&ehci1 {
status = "okay";
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
&ohci1 {
status = "okay";
status = "okay";
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp803.dtsi"
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "afvcc-csi";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi-dsi";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_dldo3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avdd-csi";
};
&reg_dldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-io";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&uart0 {
@ -90,5 +198,6 @@
};
&usbphy {
status = "okay";
status = "okay";
};

59
arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi
View File

@ -1,59 +0,0 @@
/ {
aliases {
ethernet0 = &emac;
};
soc {
syscon: syscon@1c00000 {
compatible = "allwinner,sun50i-a64-system-controller",
"syscon";
reg = <0x01c00000 0x1000>;
};
emac: ethernet@1c30000 {
compatible = "allwinner,sun50i-a64-emac";
syscon = <&syscon>;
reg = <0x01c30000 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_EMAC>;
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
status = "okay";
mdio: mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
};
};
};
&pio {
rmii_pins: rmii_pins {
pins = "PD10", "PD11", "PD13", "PD14", "PD17",
"PD18", "PD19", "PD20", "PD22", "PD23";
function = "emac";
drive-strength = <40>;
};
rgmii_pins: rgmii_pins {
pins = "PD8", "PD9", "PD10", "PD11", "PD12",
"PD13", "PD15", "PD16", "PD17", "PD18",
"PD19", "PD20", "PD21", "PD22", "PD23";
function = "emac";
drive-strength = <40>;
};
};

17
arch/arm/dts/sun50i-a64-pine64-plus.dts
View File

@ -46,5 +46,20 @@
model = "Pine64+";
compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
/* TODO: Camera, Ethernet PHY, touchscreen, etc. */
/* TODO: Camera, touchscreen, etc. */
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
status = "okay";
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};

186
arch/arm/dts/sun50i-a64-pine64.dts
View File

@ -51,25 +51,37 @@
compatible = "pine64,pine64", "allwinner,sun50i-a64";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rmii_pins>;
phy-mode = "rmii";
phy-handle = <&ext_rmii_phy1>;
phy-supply = <&reg_dc1sw>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@ -80,27 +92,183 @@
bias-pull-up;
};
&mdio {
ext_rmii_phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
disable-wp;
bus-width = <4>;
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp803.dtsi"
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dc1sw {
regulator-name = "vcc-phy";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
/*
* The DRAM chips used by Pine64 boards are DDR3L-compatible, so they can
* work at 1.35V with less power consumption.
* As AXP803 DCDC5 cannot reach 1.35V accurately, use 1.36V instead.
*/
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1360000>;
regulator-max-microvolt = <1360000>;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-mipi";
};
&reg_dldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
/* On Euler connector */
&spdif {
status = "disabled";
};
/* On Exp and Euler connectors */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
/* On Wifi/BT connector, with RTS/CTS */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "disabled";
};
/* On Pi-2 connector */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
/* On Euler connector */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "disabled";
};
/* On Euler connector, RTS/CTS optional */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
status = "disabled";
};
&usb_otg {
dr_mode = "host";
status = "okay";

150
arch/arm/dts/sun50i-a64-sopine-baseboard.dts Normal file
View File

@ -0,0 +1,150 @@
/*
* Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
*
* Based on sun50i-a64-pine64.dts, which is:
* Copyright (c) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun50i-a64-sopine.dtsi"
/ {
model = "SoPine with baseboard";
compatible = "pine64,sopine-baseboard", "pine64,sopine",
"allwinner,sun50i-a64";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
reg_vcc1v8: vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dc1sw>;
status = "okay";
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_vcc1v8>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&reg_dc1sw {
regulator-name = "vcc-phy";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-mipi";
};
&reg_dldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usb_otg {
dr_mode = "host";
status = "okay";
};
&usbphy {
status = "okay";
};

142
arch/arm/dts/sun50i-a64-sopine.dtsi Normal file
View File

@ -0,0 +1,142 @@
/*
* Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
*
* Based on sun50i-a64-pine64.dts, which is:
* Copyright (c) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "sun50i-a64.dtsi"
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
non-removable;
disable-wp;
bus-width = <4>;
status = "okay";
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp803.dtsi"
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_eldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vdd-1v8-lpddr";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};

305
arch/arm/dts/sun50i-a64.dtsi
View File

@ -43,6 +43,7 @@
*/
#include <dt-bindings/clock/sun50i-a64-ccu.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/sun50i-a64-ccu.h>
@ -51,6 +52,26 @@
#address-cells = <1>;
#size-cells = <1>;
chosen {
#address-cells = <1>;
#size-cells = <1>;
ranges;
/*
* The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU.
* However there is no support for this clock on A64 yet, so we depend
* on the upstream clocks here to keep them (and thus CLK_MIXER0) up.
*/
simplefb_lcd: framebuffer-lcd {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "mixer0-lcd0";
clocks = <&ccu CLK_TCON0>,
<&ccu CLK_DE>, <&ccu CLK_BUS_DE>;
status = "disabled";
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
@ -111,6 +132,24 @@
method = "smc";
};
sound_spdif {
compatible = "simple-audio-card";
simple-audio-card,name = "On-board SPDIF";
simple-audio-card,cpu {
sound-dai = <&spdif>;
};
simple-audio-card,codec {
sound-dai = <&spdif_out>;
};
};
spdif_out: spdif-out {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
@ -129,6 +168,23 @@
#size-cells = <1>;
ranges;
syscon: syscon@1c00000 {
compatible = "allwinner,sun50i-a64-system-controller",
"syscon";
reg = <0x01c00000 0x1000>;
};
dma: dma-controller@1c02000 {
compatible = "allwinner,sun50i-a64-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_DMA>;
dma-channels = <8>;
dma-requests = <27>;
resets = <&ccu RST_BUS_DMA>;
#dma-cells = <1>;
};
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
@ -171,7 +227,7 @@
#size-cells = <0>;
};
usb_otg: usb@01c19000 {
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
@ -184,7 +240,7 @@
status = "disabled";
};
usbphy: phy@01c19400 {
usbphy: phy@1c19400 {
compatible = "allwinner,sun50i-a64-usb-phy";
reg = <0x01c19400 0x14>,
<0x01c1a800 0x4>,
@ -204,7 +260,7 @@
#phy-cells = <1>;
};
ehci0: usb@01c1a000 {
ehci0: usb@1c1a000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@ -216,7 +272,7 @@
status = "disabled";
};
ohci0: usb@01c1a400 {
ohci0: usb@1c1a400 {
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@ -226,7 +282,7 @@
status = "disabled";
};
ehci1: usb@01c1b000 {
ehci1: usb@1c1b000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@ -240,7 +296,7 @@
status = "disabled";
};
ohci1: usb@01c1b400 {
ohci1: usb@1c1b400 {
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@ -252,7 +308,7 @@
status = "disabled";
};
ccu: clock@01c20000 {
ccu: clock@1c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
@ -273,6 +329,11 @@
interrupt-controller;
#interrupt-cells = <3>;
i2c0_pins: i2c0_pins {
pins = "PH0", "PH1";
function = "i2c0";
};
i2c1_pins: i2c1_pins {
pins = "PH2", "PH3";
function = "i2c1";
@ -303,7 +364,37 @@
bias-pull-up;
};
uart0_pins_a: uart0@0 {
rmii_pins: rmii_pins {
pins = "PD10", "PD11", "PD13", "PD14", "PD17",
"PD18", "PD19", "PD20", "PD22", "PD23";
function = "emac";
drive-strength = <40>;
};
rgmii_pins: rgmii_pins {
pins = "PD8", "PD9", "PD10", "PD11", "PD12",
"PD13", "PD15", "PD16", "PD17", "PD18",
"PD19", "PD20", "PD21", "PD22", "PD23";
function = "emac";
drive-strength = <40>;
};
spdif_tx_pin: spdif {
pins = "PH8";
function = "spdif";
};
spi0_pins: spi0 {
pins = "PC0", "PC1", "PC2", "PC3";
function = "spi0";
};
spi1_pins: spi1 {
pins = "PD0", "PD1", "PD2", "PD3";
function = "spi1";
};
uart0_pins_a: uart0 {
pins = "PB8", "PB9";
function = "uart0";
};
@ -317,9 +408,73 @@
pins = "PG8", "PG9";
function = "uart1";
};
uart2_pins: uart2-pins {
pins = "PB0", "PB1";
function = "uart2";
};
uart3_pins: uart3-pins {
pins = "PD0", "PD1";
function = "uart3";
};
uart4_pins: uart4-pins {
pins = "PD2", "PD3";
function = "uart4";
};
uart4_rts_cts_pins: uart4-rts-cts-pins {
pins = "PD4", "PD5";
function = "uart4";
};
};
pwm: pwm@01c21400 {
spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun50i-a64-spdif",
"allwinner,sun8i-h3-spdif";
reg = <0x01c21000 0x400>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
resets = <&ccu RST_BUS_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma 2>;
dma-names = "tx";
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx_pin>;
status = "disabled";
};
i2s0: i2s@1c22000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun50i-a64-i2s",
"allwinner,sun8i-h3-i2s";
reg = <0x01c22000 0x400>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
clock-names = "apb", "mod";
resets = <&ccu RST_BUS_I2S0>;
dma-names = "rx", "tx";
dmas = <&dma 3>, <&dma 3>;
status = "disabled";
};
i2s1: i2s@1c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun50i-a64-i2s",
"allwinner,sun8i-h3-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
clock-names = "apb", "mod";
resets = <&ccu RST_BUS_I2S1>;
dma-names = "rx", "tx";
dmas = <&dma 4>, <&dma 4>;
status = "disabled";
};
pwm: pwm@1c21400 {
compatible = "allwinner,sun50i-a64-pwm",
"allwinner,sun5i-a13-pwm";
reg = <0x01c21400 0x8>;
@ -334,8 +489,8 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 67>;
resets = <&ccu 46>;
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
@ -345,8 +500,8 @@
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 68>;
resets = <&ccu 47>;
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
@ -356,8 +511,8 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 69>;
resets = <&ccu 48>;
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
@ -367,8 +522,8 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 70>;
resets = <&ccu 49>;
clocks = <&ccu CLK_BUS_UART3>;
resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
@ -378,8 +533,8 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 71>;
resets = <&ccu 50>;
clocks = <&ccu CLK_BUS_UART4>;
resets = <&ccu RST_BUS_UART4>;
status = "disabled";
};
@ -387,8 +542,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu 63>;
resets = <&ccu 42>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -398,8 +553,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu 64>;
resets = <&ccu 43>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -409,13 +564,69 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu 65>;
resets = <&ccu 44>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi0: spi@1c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma 23>, <&dma 23>;
dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
resets = <&ccu RST_BUS_SPI0>;
status = "disabled";
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@1c69000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c69000 0x1000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma 24>, <&dma 24>;
dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
resets = <&ccu RST_BUS_SPI1>;
status = "disabled";
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
emac: ethernet@1c30000 {
compatible = "allwinner,sun50i-a64-emac";
syscon = <&syscon>;
reg = <0x01c30000 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_EMAC>;
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
mdio: mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
};
};
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
@ -434,25 +645,61 @@
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
r_intc: interrupt-controller@1f00c00 {
compatible = "allwinner,sun50i-a64-r-intc",
"allwinner,sun6i-a31-r-intc";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01f00c00 0x400>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>;
clocks = <&osc24M>, <&osc32k>, <&iosc>;
clock-names = "hosc", "losc", "iosc";
clocks = <&osc24M>, <&osc32k>, <&iosc>,
<&ccu 11>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
};
r_pio: pinctrl@01f02c00 {
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
r_rsb_pins: rsb {
pins = "PL0", "PL1";
function = "s_rsb";
};
};
r_rsb: rsb@1f03400 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x01f03400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu 6>;
clock-frequency = <3000000>;
resets = <&r_ccu 2>;
pinctrl-names = "default";
pinctrl-0 = <&r_rsb_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
wdt0: watchdog@1c20ca0 {
compatible = "allwinner,sun50i-a64-wdt",
"allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
};
};
};

5
arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
View File

@ -1,11 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
* Copyright (C) 2018 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
/dts-v1/;
#include "sun50i-h5.dtsi"
#include "sunxi-libretech-all-h3-cc.dtsi"
#include <sunxi-libretech-all-h3-cc.dtsi>
/ {
model = "Libre Computer Board ALL-H3-CC H5";

124
arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
View File

@ -1,18 +1,18 @@
/*
* Copyright (C) 2017 Antony Antony <antony@phenome.org>
* Copyright (c) 2016 ARM Ltd.
* Copyright (C) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
@ -42,16 +42,18 @@
*/
/dts-v1/;
#include "sun50i-h5.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "FriendlyARM NanoPi NEO Plus 2";
model = "FriendlyARM NanoPi NEO Plus2";
compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
};
@ -59,28 +61,116 @@
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pwr {
label = "nanopi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
status {
label = "nanopi:red:status";
gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vdd_cpux: gpio-regulator {
compatible = "regulator-gpio";
pinctrl-names = "default";
regulator-name = "vdd-cpux";
regulator-type = "voltage";
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-ramp-delay = <50>; /* 4ms */
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
gpios-states = <0x1>;
states = <1100000 0x0
1300000 0x1>;
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
post-power-on-delay-ms = <200>;
};
};
&ehci1 {
&codec {
allwinner,audio-routing =
"Line Out", "LINEOUT",
"MIC1", "Mic",
"Mic", "MBIAS";
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci3 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
status = "okay";
};
&external_mdio {
ext_rgmii_phy: ethernet-phy@7 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <7>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
&mmc1 {
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
@ -91,7 +181,11 @@
status = "okay";
};
&ohci1 {
&ohci0 {
status = "okay";
};
&ohci3 {
status = "okay";
};
@ -101,6 +195,12 @@
status = "okay";
};
&usbphy {
&usb_otg {
dr_mode = "host";
status = "okay";
};
&usbphy {
/* USB Type-A ports' VBUS is always on */
status = "okay";
};

91
arch/arm/dts/sun50i-h5-nanopi-neo2.dts
View File

@ -1,18 +1,17 @@
/*
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
* Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
@ -42,7 +41,6 @@
*/
/dts-v1/;
#include "sun50i-h5.dtsi"
#include <dt-bindings/gpio/gpio.h>
@ -52,6 +50,7 @@
compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
};
@ -59,28 +58,102 @@
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pwr {
label = "nanopi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
status {
label = "nanopi:blue:status";
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
};
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_usb0_vbus: usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
};
};
&ehci0 {
status = "okay";
};
&ehci3 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
status = "okay";
};
&external_mdio {
ext_rgmii_phy: ethernet-phy@7 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <7>;
};
};
&mmc0 {
compatible = "allwinner,sun50i-h5-mmc",
"allwinner,sun50i-a64-mmc",
"allwinner,sun5i-a13-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci3 {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
/* USB Type-A port's VBUS is always on */
usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
usb0_vbus-supply = <&reg_usb0_vbus>;
status = "okay";
};

153
arch/arm/dts/sun50i-h5-orangepi-pc2.dts
View File

@ -1,17 +1,17 @@
/*
* Copyright (c) 2016 ARM Ltd.
* Copyright (C) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
@ -41,36 +41,99 @@
*/
/dts-v1/;
#include "sun50i-h5.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "OrangePi PC 2";
compatible = "xunlong,orangepi-pc-2", "allwinner,sun50i-h5";
model = "Xunlong Orange Pi PC 2";
compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5";
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
aliases {
serial0 = &uart0;
ethernet0 = &emac;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
reg = <0x40000000 0x40000000>;
};
connector {
compatible = "hdmi-connector";
type = "a";
soc {
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pwr {
label = "orangepi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
status {
label = "orangepi:red:status";
gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
};
r-gpio-keys {
compatible = "gpio-keys";
sw4 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
reg_usb0_vbus: usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
};
};
&codec {
allwinner,audio-routing =
"Line Out", "LINEOUT",
"MIC1", "Mic",
"Mic", "MBIAS";
status = "okay";
};
&de {
status = "okay";
};
&ehci0 {
@ -81,11 +144,20 @@
status = "okay";
};
&ehci2 {
status = "okay";
};
&ehci3 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
status = "okay";
};
@ -96,16 +168,26 @@
};
};
&mmc0 {
compatible = "allwinner,sun50i-h5-mmc",
"allwinner,sun50i-a64-mmc",
"allwinner,sun5i-a13-mmc";
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
@ -117,17 +199,40 @@
status = "okay";
};
&ohci2 {
status = "okay";
};
&ohci3 {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
/* USB Type-A ports' VBUS is always on */
usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
usb0_vbus-supply = <&reg_usb0_vbus>;
status = "okay";
};

178
arch/arm/dts/sun50i-h5-orangepi-prime.dts
View File

@ -1,17 +1,20 @@
/*
* Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
*
* Based on sun50i-h5-orangepi-pc2.dts, which is:
* Copyright (C) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
@ -41,16 +44,17 @@
*/
/dts-v1/;
#include "sun50i-h5.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "OrangePi Prime";
model = "Xunlong Orange Pi Prime";
compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
};
@ -58,18 +62,85 @@
stdout-path = "serial0:115200n8";
};
memory {
reg = <0x40000000 0x80000000>;
};
connector {
compatible = "hdmi-connector";
type = "a";
soc {
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pwr {
label = "orangepi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
status {
label = "orangepi:red:status";
gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
};
r-gpio-keys {
compatible = "gpio-keys";
sw4 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_usb0_vbus: usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
};
};
&codec {
allwinner,audio-routing =
"Line Out", "LINEOUT",
"MIC1", "Mic",
"Mic", "MBIAS";
status = "okay";
};
&de {
status = "okay";
};
&ehci0 {
@ -80,16 +151,58 @@
status = "okay";
};
&mmc0 {
compatible = "allwinner,sun50i-h5-mmc",
"allwinner,sun50i-a64-mmc",
"allwinner,sun5i-a13-mmc";
&ehci2 {
status = "okay";
};
&ehci3 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
status = "okay";
};
&external_mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
&mmc1 {
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
};
@ -101,17 +214,40 @@
status = "okay";
};
&ohci2 {
status = "okay";
};
&ohci3 {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
/* USB Type-A ports' VBUS is always on */
usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
usb0_vbus-supply = <&reg_usb0_vbus>;
status = "okay";
};

64
arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
View File

@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
/ {
model = "OrangePi Zero Plus2";
compatible = "xunlong,orangepi-zero-plus2", "allwinner,sun50i-h5";
@ -59,27 +58,70 @@
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
post-power-on-delay-ms = <200>;
};
};
&de {
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mmc0 {
compatible = "allwinner,sun50i-h5-mmc",
"allwinner,sun50i-a64-mmc",
"allwinner,sun5i-a13-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
&mmc1 {
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&r_pio>;
interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
interrupt-names = "host-wake";
};
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
@ -95,3 +137,9 @@
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};

38
arch/arm/dts/sun50i-h5.dtsi
View File

@ -1,17 +1,17 @@
/*
* Copyright (c) 2016 ARM Ltd.
* Copyright (C) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
@ -40,24 +40,38 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "sun8i-h3.dtsi"
#include <sunxi-h3-h5.dtsi>
/ {
cpus {
cpu@0 {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <0>;
enable-method = "psci";
};
cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <1>;
enable-method = "psci";
};
cpu@2 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <2>;
enable-method = "psci";
};
cpu@3 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <3>;
enable-method = "psci";
};
};
@ -69,6 +83,14 @@
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
};
@ -76,8 +98,8 @@
compatible = "allwinner,sun50i-h5-ccu";
};
&gic {
compatible = "arm,gic-400";
&display_clocks {
compatible = "allwinner,sun50i-h5-de2-clk";
};
&mmc0 {
@ -104,6 +126,6 @@
&pio {
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
compatible = "allwinner,sun50i-h5-pinctrl";
};

57
arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
View File

@ -49,7 +49,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi Zero";
@ -58,6 +57,7 @@
aliases {
serial0 = &uart0;
/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
ethernet0 = &emac;
ethernet1 = &xr819;
};
@ -92,9 +92,14 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
post-power-on-delay-ms = <200>;
};
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
@ -107,18 +112,13 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
cd-inverted;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vcc_wifi>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@ -134,17 +134,56 @@
};
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&spi0 {
/* Disable SPI NOR by default: it optional on Orange Pi Zero boards */
status = "disabled";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mxicy,mx25l1606e", "winbond,w25q128";
reg = <0>;
spi-max-frequency = <40000000>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usbphy {
/* USB VBUS is always on */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
&usb_otg {
dr_mode = "peripheral";
status = "okay";
};
&usbphy {
/*
* USB Type-A port VBUS is always on. However, MicroUSB VBUS can only
* power up the board; when it's used as OTG port, this VBUS is
* always off even if the board is powered via GPIO pins.
*/
status = "okay";
usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
};

96
arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts
View File

@ -46,13 +46,13 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Banana Pi BPI-M2-Plus";
compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
serial1 = &uart1;
};
@ -61,10 +61,20 @@
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pwr_led_bpi_m2p>;
pwr_led {
label = "bananapi-m2-plus:red:pwr";
@ -76,7 +86,6 @@
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&sw_r_bpi_m2p>;
sw4 {
label = "power";
@ -85,14 +94,27 @@
};
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_en_bpi_m2p>;
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -105,6 +127,33 @@
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
status = "okay";
};
&external_mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
@ -112,18 +161,13 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
cd-inverted;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
@ -131,7 +175,7 @@
non-removable;
status = "okay";
brcmf: bcrmf@1 {
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
@ -162,27 +206,9 @@
status = "okay";
};
&r_pio {
pwr_led_bpi_m2p: led_pins@0 {
allwinner,pins = "PL10";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
sw_r_bpi_m2p: key_pins@0 {
allwinner,pins = "PL3";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
wifi_en_bpi_m2p: wifi_en_pin {
allwinner,pins = "PL7";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
&reg_usb0_vbus {
gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
status = "okay";
};
&uart0 {
@ -193,7 +219,7 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>;
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
@ -203,6 +229,8 @@
};
&usbphy {
/* USB VBUS is on as long as VCC-IO is on */
usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
usb0_vbus-supply = <&reg_usb0_vbus>;
/* USB host VBUS is on as long as VCC-IO is on */
status = "okay";
};

3
arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts
View File

@ -1,6 +1,7 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
*
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;

78
arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
View File

@ -45,6 +45,28 @@
/ {
model = "FriendlyArm NanoPi M1 Plus";
compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
aliases {
serial1 = &uart3;
ethernet0 = &emac;
ethernet1 = &sdio_wifi;
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
};
&ehci1 {
@ -55,6 +77,56 @@
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
status = "okay";
};
&external_mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <7>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&mmc1 {
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
sdio_wifi: sdio_wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
interrupt-names = "host-wake";
};
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
bus-width = <8>;
non-removable;
status = "okay";
};
&ohci1 {
status = "okay";
};
@ -62,3 +134,9 @@
&ohci2 {
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
status = "okay";
};

42
arch/arm/dts/sun8i-h3-nanopi-m1.dts
View File

@ -45,6 +45,25 @@
/ {
model = "FriendlyArm NanoPi M1";
compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
aliases {
ethernet0 = &emac;
};
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
};
&de {
status = "okay";
};
&ehci1 {
@ -55,6 +74,29 @@
status = "okay";
};
&emac {
phy-handle = <&int_mii_phy>;
phy-mode = "mii";
allwinner,leds-active-low;
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&ohci1 {
status = "okay";
};

28
arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
View File

@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "FriendlyARM NanoPi NEO Air";
@ -73,18 +72,37 @@
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
};
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
cd-inverted;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
&mmc1 {
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
interrupt-names = "host-wake";
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;

17
arch/arm/dts/sun8i-h3-nanopi-neo.dts
View File

@ -47,9 +47,26 @@
compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
};
&ehci0 {
status = "okay";
};
&emac {
phy-handle = <&int_mii_phy>;
phy-mode = "mii";
allwinner,leds-active-low;
status = "okay";
};
&ohci0 {
status = "okay";
};
&usb_otg {
status = "okay";
dr_mode = "peripheral";
};
&usbphy {
usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
};

13
arch/arm/dts/sun8i-h3-nanopi.dtsi
View File

@ -81,7 +81,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sw_r_npi>;
k1@0 {
k1 {
label = "k1";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
@ -95,10 +95,7 @@
&mmc0 {
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
status = "okay";
vmmc-supply = <&reg_vcc3v3>;
};
@ -108,19 +105,19 @@
};
&pio {
leds_npi: led_pins@0 {
leds_npi: led_pins {
pins = "PA10";
function = "gpio_out";
};
};
&r_pio {
leds_r_npi: led_pins@0 {
leds_r_npi: led_pins {
pins = "PL10";
function = "gpio_out";
};
sw_r_npi: key_pins@0 {
sw_r_npi: key_pins {
pins = "PL3";
function = "gpio_in";
};

92
arch/arm/dts/sun8i-h3-orangepi-2.dts
View File

@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi 2";
@ -63,6 +62,17 @@
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -106,6 +116,19 @@
};
};
&codec {
allwinner,pa-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
allwinner,audio-routing =
"Speaker", "LINEOUT",
"MIC1", "Mic",
"Mic", "MBIAS";
status = "okay";
};
&de {
status = "okay";
};
&ehci1 {
status = "okay";
};
@ -117,6 +140,16 @@
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
@ -124,18 +157,13 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
cd-inverted;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@ -152,34 +180,26 @@
};
&pio {
leds_opc: led_pins@0 {
allwinner,pins = "PA15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
leds_opc: led_pins {
pins = "PA15";
function = "gpio_out";
};
};
&r_pio {
leds_r_opc: led_pins@0 {
allwinner,pins = "PL10";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
leds_r_opc: led_pins {
pins = "PL10";
function = "gpio_out";
};
sw_r_opc: key_pins@0 {
allwinner,pins = "PL3", "PL4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
sw_r_opc: key_pins {
pins = "PL3", "PL4";
function = "gpio_in";
};
wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 {
allwinner,pins = "PL7";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin {
pins = "PL7";
function = "gpio_out";
};
};
@ -194,8 +214,22 @@
status = "okay";
};
&usb1_vbus_pin_a {
allwinner,pins = "PG13";
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "disabled";
};
&usbphy {

57
arch/arm/dts/sun8i-h3-orangepi-lite.dts
View File

@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi Lite";
@ -62,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -92,6 +102,10 @@
};
};
&de {
status = "okay";
};
&ehci1 {
status = "okay";
};
@ -100,6 +114,16 @@
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
@ -107,18 +131,13 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
cd-inverted;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
non-removable;
@ -142,27 +161,21 @@
};
&pio {
leds_opc: led_pins@0 {
allwinner,pins = "PA15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
leds_opc: led_pins {
pins = "PA15";
function = "gpio_out";
};
};
&r_pio {
leds_r_opc: led_pins@0 {
allwinner,pins = "PL10";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
leds_r_opc: led_pins {
pins = "PL10";
function = "gpio_out";
};
sw_r_opc: key_pins@0 {
allwinner,pins = "PL3";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
sw_r_opc: key_pins {
pins = "PL3";
function = "gpio_in";
};
};

118
arch/arm/dts/sun8i-h3-orangepi-one.dts
View File

@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi One";
@ -61,6 +60,17 @@
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -89,6 +99,35 @@
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
reg_vdd_cpux: vdd-cpux-regulator {
compatible = "regulator-gpio";
regulator-name = "vdd-cpux";
regulator-type = "voltage";
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-ramp-delay = <50>; /* 4ms */
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
enable-active-high;
gpios-states = <0x1>;
states = <1100000 0x0
1300000 0x1>;
};
};
&cpu0 {
cpu-supply = <&reg_vdd_cpux>;
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
@ -102,13 +141,24 @@
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
cd-inverted;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
&ohci0 {
status = "okay";
};
@ -117,37 +167,61 @@
};
&pio {
leds_opc: led_pins@0 {
allwinner,pins = "PA15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
leds_opc: led_pins {
pins = "PA15";
function = "gpio_out";
};
};
&r_pio {
leds_r_opc: led_pins@0 {
allwinner,pins = "PL10";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
leds_r_opc: led_pins {
pins = "PL10";
function = "gpio_out";
};
sw_r_opc: key_pins@0 {
allwinner,pins = "PL3";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
sw_r_opc: key_pins {
pins = "PL3";
function = "gpio_in";
};
};
&reg_usb0_vbus {
gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usbphy {
/* USB VBUS is always on */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "disabled";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
/* USB Type-A port's VBUS is always on */
usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
usb0_vbus-supply = <&reg_usb0_vbus>;
status = "okay";
};

11
arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
View File

@ -53,9 +53,12 @@
};
};
&emac {
/* LEDs changed to active high on the plus */
/delete-property/ allwinner,leds-active-low;
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
non-removable;
@ -82,7 +85,7 @@
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
drive-strength = <40>;
/* eMMC is missing pull-ups */
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
bias-pull-up;
};

141
arch/arm/dts/sun8i-h3-orangepi-pc.dts
View File

@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi PC";
@ -61,6 +60,17 @@
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -91,6 +101,26 @@
};
};
&codec {
allwinner,audio-routing =
"Line Out", "LINEOUT",
"MIC1", "Mic",
"Mic", "MBIAS";
status = "okay";
};
&de {
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_vdd_cpux>;
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
@ -103,6 +133,23 @@
status = "okay";
};
&emac {
phy-handle = <&int_mii_phy>;
phy-mode = "mii";
allwinner,leds-active-low;
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
@ -110,12 +157,13 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
cd-inverted;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
&ohci0 {
status = "okay";
};
@ -132,44 +180,85 @@
};
&pio {
leds_opc: led_pins@0 {
allwinner,pins = "PA15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
leds_opc: led_pins {
pins = "PA15";
function = "gpio_out";
};
};
&r_i2c {
status = "okay";
reg_vdd_cpux: regulator@65 {
compatible = "silergy,sy8106a";
reg = <0x65>;
regulator-name = "vdd-cpux";
silergy,fixed-microvolt = <1200000>;
/*
* The datasheet uses 1.1V as the minimum value of VDD-CPUX,
* however both the Armbian DVFS table and the official one
* have operating points with voltage under 1.1V, and both
* DVFS table are known to work properly at the lowest
* operating point.
*
* Use 1.0V as the minimum voltage instead.
*/
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
};
};
&r_pio {
leds_r_opc: led_pins@0 {
allwinner,pins = "PL10";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
leds_r_opc: led_pins {
pins = "PL10";
function = "gpio_out";
};
sw_r_opc: key_pins@0 {
allwinner,pins = "PL3";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
sw_r_opc: key_pins {
pins = "PL3";
function = "gpio_in";
};
};
&reg_usb0_vbus {
gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usbphy {
/* USB VBUS is always on */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "disabled";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&emac {
phy-handle = <&int_mii_phy>;
phy-mode = "mii";
allwinner,leds-active-low;
&usbphy {
usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
usb0_vbus-supply = <&reg_usb0_vbus>;
/* VBUS on USB host ports are always on */
status = "okay";
};

29
arch/arm/dts/sun8i-h3-orangepi-plus.dts
View File

@ -47,10 +47,12 @@
model = "Xunlong Orange Pi Plus / Plus 2";
compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
aliases {
ethernet0 = &emac;
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&gmac_power_pin_orangepi>;
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@ -77,11 +79,13 @@
};
&emac {
/* The Orange Pi Plus uses an external phy */
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
status = "okay";
};
&external_mdio {
@ -103,24 +107,15 @@
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
drive-strength = <40>;
/* eMMC is missing pull-ups */
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
bias-pull-up;
};
&pio {
gmac_power_pin_orangepi: gmac_power_pin@0 {
allwinner,pins = "PD6";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb3_vbus_pin_a: usb3_vbus_pin@0 {
allwinner,pins = "PG11";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
usb3_vbus_pin_a: usb3_vbus_pin {
pins = "PG11";
function = "gpio_out";
};
};

15
arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
View File

@ -53,24 +53,22 @@
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&gmac_power_pin_orangepi>;
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
};
};
&emac {
/* The Orange Pi Plus 2E uses an external gbit phy */
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
status = "okay";
};
&external_mdio {
@ -79,12 +77,3 @@
reg = <1>;
};
};
&pio {
gmac_power_pin_orangepi: gmac_power_pin@0 {
allwinner,pins = "PD6";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};

610
arch/arm/dts/sun8i-h3.dtsi
View File

@ -40,46 +40,65 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
#include <dt-bindings/clock/sun8i-h3-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/reset/sun8i-h3-ccu.h>
#include "sunxi-h3-h5.dtsi"
/ {
interrupt-parent = <&gic>;
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
aliases {
ethernet0 = &emac;
opp@648000000 {
opp-hz = /bits/ 64 <648000000>;
opp-microvolt = <1040000 1040000 1300000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp@816000000 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <1100000 1100000 1300000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp@1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1200000 1200000 1300000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>;
};
cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
operating-points-v2 = <&cpu0_opp_table>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
operating-points-v2 = <&cpu0_opp_table>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
operating-points-v2 = <&cpu0_opp_table>;
};
};
@ -91,509 +110,78 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
osc32k: osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
apb0: apb0_clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
clock-mult = <1>;
clocks = <&osc24M>;
clock-output-names = "apb0";
};
apb0_gates: clk@01f01428 {
compatible = "allwinner,sun8i-h3-apb0-gates-clk",
"allwinner,sun4i-a10-gates-clk";
reg = <0x01f01428 0x4>;
#clock-cells = <1>;
clocks = <&apb0>;
clock-indices = <0>, <1>;
clock-output-names = "apb0_pio", "apb0_ir";
};
ir_clk: ir_clk@01f01454 {
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01f01454 0x4>;
#clock-cells = <0>;
clocks = <&osc32k>, <&osc24M>;
clock-output-names = "ir";
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
mali: gpu@1c40000 {
compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
reg = <0x01c40000 0x10000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp",
"gpmmu",
"pp0",
"ppmmu0",
"pp1",
"ppmmu1",
"pmu";
clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
clock-names = "bus", "core";
resets = <&ccu RST_BUS_GPU>;
syscon: syscon@1c00000 {
compatible = "allwinner,sun8i-h3-system-controller",
"syscon";
reg = <0x01c00000 0x1000>;
};
dma: dma-controller@01c02000 {
compatible = "allwinner,sun8i-h3-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_DMA>;
resets = <&ccu RST_BUS_DMA>;
#dma-cells = <1>;
};
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun7i-a20-mmc",
"allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_BUS_MMC0>,
<&ccu CLK_MMC0>,
<&ccu CLK_MMC0_OUTPUT>,
<&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc1: mmc@01c10000 {
compatible = "allwinner,sun7i-a20-mmc",
"allwinner,sun5i-a13-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ccu CLK_BUS_MMC1>,
<&ccu CLK_MMC1>,
<&ccu CLK_MMC1_OUTPUT>,
<&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ccu RST_BUS_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@01c11000 {
compatible = "allwinner,sun7i-a20-mmc",
"allwinner,sun5i-a13-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&ccu CLK_BUS_MMC2>,
<&ccu CLK_MMC2>,
<&ccu CLK_MMC2_OUTPUT>,
<&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ccu RST_BUS_MMC2>;
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-h3-musb";
reg = <0x01c19000 0x400>;
clocks = <&ccu CLK_BUS_OTG>;
resets = <&ccu RST_BUS_OTG>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
status = "disabled";
};
usbphy: phy@01c19400 {
compatible = "allwinner,sun8i-h3-usb-phy";
reg = <0x01c19400 0x2c>,
<0x01c1a800 0x4>,
<0x01c1b800 0x4>,
<0x01c1c800 0x4>,
<0x01c1d800 0x4>;
reg-names = "phy_ctrl",
"pmu0",
"pmu1",
"pmu2",
"pmu3";
clocks = <&ccu CLK_USB_PHY0>,
<&ccu CLK_USB_PHY1>,
<&ccu CLK_USB_PHY2>,
<&ccu CLK_USB_PHY3>;
clock-names = "usb0_phy",
"usb1_phy",
"usb2_phy",
"usb3_phy";
resets = <&ccu RST_USB_PHY0>,
<&ccu RST_USB_PHY1>,
<&ccu RST_USB_PHY2>,
<&ccu RST_USB_PHY3>;
reset-names = "usb0_reset",
"usb1_reset",
"usb2_reset",
"usb3_reset";
status = "disabled";
#phy-cells = <1>;
};
ehci0: usb@1c1a000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
status = "disabled";
};
ohci0: usb@1c1a400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
<&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
status = "disabled";
};
ehci1: usb@01c1b000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ohci1: usb@01c1b400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
<&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ehci2: usb@01c1c000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
ohci2: usb@01c1c400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
<&ccu CLK_USB_OHCI2>;
resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
ehci3: usb@01c1d000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1d000 0x100>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
phys = <&usbphy 3>;
phy-names = "usb";
status = "disabled";
};
ohci3: usb@01c1d400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1d400 0x100>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
<&ccu CLK_USB_OHCI3>;
resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
phys = <&usbphy 3>;
phy-names = "usb";
status = "disabled";
};
ccu: clock@01c20000 {
compatible = "allwinner,sun8i-h3-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
pio: pinctrl@01c20800 {
compatible = "allwinner,sun8i-h3-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_PIO>;
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
emac_rgmii_pins: emac0 {
pins = "PD0", "PD1", "PD2", "PD3", "PD4",
"PD5", "PD7", "PD8", "PD9", "PD10",
"PD12", "PD13", "PD15", "PD16", "PD17";
function = "emac";
drive-strength = <40>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin: mmc0_cd_pin@0 {
allwinner,pins = "PF6";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc1_pins_a: mmc1@0 {
allwinner,pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
allwinner,function = "mmc1";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc2_8bit_pins: mmc2_8bit {
allwinner,pins = "PC5", "PC6", "PC8",
"PC9", "PC10", "PC11",
"PC12", "PC13", "PC14",
"PC15", "PC16";
allwinner,function = "mmc2";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_a: uart0@0 {
allwinner,pins = "PA4", "PA5";
allwinner,function = "uart0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_a: uart1@0 {
allwinner,pins = "PG6", "PG7", "PG8", "PG9";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
timer@01c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
wdt0: watchdog@01c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
dmas = <&dma 6>, <&dma 6>;
dma-names = "rx", "tx";
status = "disabled";
};
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
dmas = <&dma 7>, <&dma 7>;
dma-names = "rx", "tx";
status = "disabled";
};
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
dmas = <&dma 8>, <&dma 8>;
dma-names = "rx", "tx";
status = "disabled";
};
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART3>;
resets = <&ccu RST_BUS_UART3>;
dmas = <&dma 9>, <&dma 9>;
dma-names = "rx", "tx";
status = "disabled";
};
emac: ethernet@1c30000 {
compatible = "allwinner,sun8i-h3-emac";
syscon = <&syscon>;
reg = <0x01c30000 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_EMAC>;
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
};
mdio-mux {
compatible = "allwinner,sun8i-h3-mdio-mux";
#address-cells = <1>;
#size-cells = <0>;
mdio-parent-bus = <&mdio>;
/* Only one MDIO is usable at the time */
internal_mdio: mdio@1 {
compatible = "allwinner,sun8i-h3-mdio-internal";
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
int_mii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
clocks = <&ccu CLK_BUS_EPHY>;
resets = <&ccu RST_BUS_EPHY>;
};
};
external_mdio: mdio@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x1000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
rtc: rtc@01f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
apb0_reset: reset@01f014b0 {
reg = <0x01f014b0 0x4>;
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
};
ir: ir@01f02000 {
compatible = "allwinner,sun5i-a13-ir";
clocks = <&apb0_gates 1>, <&ir_clk>;
clock-names = "apb", "ir";
resets = <&apb0_reset 1>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01f02000 0x40>;
status = "disabled";
};
r_pio: pinctrl@01f02c00 {
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 0>;
resets = <&apb0_reset 0>;
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
ir_pins_a: ir@0 {
allwinner,pins = "PL11";
allwinner,function = "s_cir_rx";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
assigned-clocks = <&ccu CLK_GPU>;
assigned-clock-rates = <384000000>;
};
};
};
&ccu {
compatible = "allwinner,sun8i-h3-ccu";
};
&display_clocks {
compatible = "allwinner,sun8i-h3-de2-clk";
};
&mmc0 {
compatible = "allwinner,sun7i-a20-mmc";
clocks = <&ccu CLK_BUS_MMC0>,
<&ccu CLK_MMC0>,
<&ccu CLK_MMC0_OUTPUT>,
<&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
};
&mmc1 {
compatible = "allwinner,sun7i-a20-mmc";
clocks = <&ccu CLK_BUS_MMC1>,
<&ccu CLK_MMC1>,
<&ccu CLK_MMC1_OUTPUT>,
<&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
};
&mmc2 {
compatible = "allwinner,sun7i-a20-mmc";
clocks = <&ccu CLK_BUS_MMC2>,
<&ccu CLK_MMC2>,
<&ccu CLK_MMC2_OUTPUT>,
<&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
};
&pio {
compatible = "allwinner,sun8i-h3-pinctrl";
};

16
arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
View File

@ -48,6 +48,7 @@
compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
aliases {
ethernet0 = &gmac;
serial0 = &uart0;
};
@ -67,3 +68,18 @@
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};

34
arch/arm/dts/sun8i-r40.dtsi
View File

@ -161,6 +161,19 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
"PA4", "PA5", "PA6", "PA7",
"PA8", "PA10", "PA11", "PA12",
"PA13", "PA15", "PA16";
function = "gmac";
/*
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
drive-strength = <40>;
};
i2c0_pins: i2c0_pins {
pins = "PB0", "PB1";
function = "i2c0";
@ -202,6 +215,27 @@
#size-cells = <0>;
};
gmac: ethernet@1c50000 {
compatible = "allwinner,sun8i-r40-gmac";
syscon = <&ccu>;
reg = <0x01c50000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_GMAC>;
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_GMAC>;
clock-names = "stmmaceth";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
gmac_mdio: mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
};
};
gic: interrupt-controller@1c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,

860
arch/arm/dts/sunxi-h3-h5.dtsi Normal file
View File

@ -0,0 +1,860 @@
/*
* Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-h3-ccu.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/sun8i-de2.h>
#include <dt-bindings/reset/sun8i-h3-ccu.h>
#include <dt-bindings/reset/sun8i-r-ccu.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
chosen {
#address-cells = <1>;
#size-cells = <1>;
ranges;
framebuffer-hdmi {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "mixer0-lcd0-hdmi";
clocks = <&display_clocks CLK_MIXER0>,
<&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
status = "disabled";
};
framebuffer-tve {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "mixer1-lcd1-tve";
clocks = <&display_clocks CLK_MIXER1>,
<&ccu CLK_TVE>;
status = "disabled";
};
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
osc32k: osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
iosc: internal-osc-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <16000000>;
clock-accuracy = <300000000>;
clock-output-names = "iosc";
};
};
de: display-engine {
compatible = "allwinner,sun8i-h3-display-engine";
allwinner,pipelines = <&mixer0>;
status = "disabled";
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
display_clocks: clock@1000000 {
/* compatible is in per SoC .dtsi file */
reg = <0x01000000 0x100000>;
clocks = <&ccu CLK_DE>,
<&ccu CLK_BUS_DE>;
clock-names = "mod",
"bus";
resets = <&ccu RST_BUS_DE>;
#clock-cells = <1>;
#reset-cells = <1>;
};
mixer0: mixer@1100000 {
compatible = "allwinner,sun8i-h3-de2-mixer-0";
reg = <0x01100000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER0>,
<&display_clocks CLK_MIXER0>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_MIXER0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer0_out: port@1 {
reg = <1>;
mixer0_out_tcon0: endpoint {
remote-endpoint = <&tcon0_in_mixer0>;
};
};
};
};
syscon: syscon@1c00000 {
compatible = "allwinner,sun8i-h3-system-controller",
"syscon";
reg = <0x01c00000 0x1000>;
};
dma: dma-controller@1c02000 {
compatible = "allwinner,sun8i-h3-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_DMA>;
resets = <&ccu RST_BUS_DMA>;
#dma-cells = <1>;
};
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun8i-h3-tcon-tv",
"allwinner,sun8i-a83t-tcon-tv";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON0>;
reset-names = "lcd";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon0_in: port@0 {
reg = <0>;
tcon0_in_mixer0: endpoint {
remote-endpoint = <&mixer0_out_tcon0>;
};
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon0_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon0>;
};
};
};
};
mmc0: mmc@1c0f000 {
/* compatible and clocks are in per SoC .dtsi file */
reg = <0x01c0f000 0x1000>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc1: mmc@1c10000 {
/* compatible and clocks are in per SoC .dtsi file */
reg = <0x01c10000 0x1000>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
resets = <&ccu RST_BUS_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@1c11000 {
/* compatible and clocks are in per SoC .dtsi file */
reg = <0x01c11000 0x1000>;
resets = <&ccu RST_BUS_MMC2>;
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-h3-musb";
reg = <0x01c19000 0x400>;
clocks = <&ccu CLK_BUS_OTG>;
resets = <&ccu RST_BUS_OTG>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
status = "disabled";
};
usbphy: phy@1c19400 {
compatible = "allwinner,sun8i-h3-usb-phy";
reg = <0x01c19400 0x2c>,
<0x01c1a800 0x4>,
<0x01c1b800 0x4>,
<0x01c1c800 0x4>,
<0x01c1d800 0x4>;
reg-names = "phy_ctrl",
"pmu0",
"pmu1",
"pmu2",
"pmu3";
clocks = <&ccu CLK_USB_PHY0>,
<&ccu CLK_USB_PHY1>,
<&ccu CLK_USB_PHY2>,
<&ccu CLK_USB_PHY3>;
clock-names = "usb0_phy",
"usb1_phy",
"usb2_phy",
"usb3_phy";
resets = <&ccu RST_USB_PHY0>,
<&ccu RST_USB_PHY1>,
<&ccu RST_USB_PHY2>,
<&ccu RST_USB_PHY3>;
reset-names = "usb0_reset",
"usb1_reset",
"usb2_reset",
"usb3_reset";
status = "disabled";
#phy-cells = <1>;
};
ehci0: usb@1c1a000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
status = "disabled";
};
ohci0: usb@1c1a400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
<&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
status = "disabled";
};
ehci1: usb@1c1b000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ohci1: usb@1c1b400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
<&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ehci2: usb@1c1c000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
ohci2: usb@1c1c400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
<&ccu CLK_USB_OHCI2>;
resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
ehci3: usb@1c1d000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1d000 0x100>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
phys = <&usbphy 3>;
phy-names = "usb";
status = "disabled";
};
ohci3: usb@1c1d400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1d400 0x100>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
<&ccu CLK_USB_OHCI3>;
resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
phys = <&usbphy 3>;
phy-names = "usb";
status = "disabled";
};
ccu: clock@1c20000 {
/* compatible is in per SoC .dtsi file */
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
pio: pinctrl@1c20800 {
/* compatible is in per SoC .dtsi file */
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
emac_rgmii_pins: emac0 {
pins = "PD0", "PD1", "PD2", "PD3", "PD4",
"PD5", "PD7", "PD8", "PD9", "PD10",
"PD12", "PD13", "PD15", "PD16", "PD17";
function = "emac";
drive-strength = <40>;
};
i2c0_pins: i2c0 {
pins = "PA11", "PA12";
function = "i2c0";
};
i2c1_pins: i2c1 {
pins = "PA18", "PA19";
function = "i2c1";
};
i2c2_pins: i2c2 {
pins = "PE12", "PE13";
function = "i2c2";
};
mmc0_pins: mmc0 {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
bias-pull-up;
};
mmc1_pins: mmc1 {
pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
function = "mmc1";
drive-strength = <30>;
bias-pull-up;
};
mmc2_8bit_pins: mmc2_8bit {
pins = "PC5", "PC6", "PC8",
"PC9", "PC10", "PC11",
"PC12", "PC13", "PC14",
"PC15", "PC16";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
spdif_tx_pins_a: spdif {
pins = "PA17";
function = "spdif";
};
spi0_pins: spi0 {
pins = "PC0", "PC1", "PC2", "PC3";
function = "spi0";
};
spi1_pins: spi1 {
pins = "PA15", "PA16", "PA14", "PA13";
function = "spi1";
};
uart0_pins_a: uart0 {
pins = "PA4", "PA5";
function = "uart0";
};
uart1_pins: uart1 {
pins = "PG6", "PG7";
function = "uart1";
};
uart1_rts_cts_pins: uart1_rts_cts {
pins = "PG8", "PG9";
function = "uart1";
};
uart2_pins: uart2 {
pins = "PA0", "PA1";
function = "uart2";
};
uart3_pins: uart3 {
pins = "PA13", "PA14";
function = "uart3";
};
uart3_rts_cts_pins: uart3_rts_cts {
pins = "PA15", "PA16";
function = "uart3";
};
};
timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
emac: ethernet@1c30000 {
compatible = "allwinner,sun8i-h3-emac";
syscon = <&syscon>;
reg = <0x01c30000 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_EMAC>;
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
};
mdio-mux {
compatible = "allwinner,sun8i-h3-mdio-mux";
#address-cells = <1>;
#size-cells = <0>;
mdio-parent-bus = <&mdio>;
/* Only one MDIO is usable at the time */
internal_mdio: mdio@1 {
compatible = "allwinner,sun8i-h3-mdio-internal";
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
int_mii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
clocks = <&ccu CLK_BUS_EPHY>;
resets = <&ccu RST_BUS_EPHY>;
};
};
external_mdio: mdio@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
spi0: spi@1c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma 23>, <&dma 23>;
dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
resets = <&ccu RST_BUS_SPI0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@1c69000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c69000 0x1000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma 24>, <&dma 24>;
dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
resets = <&ccu RST_BUS_SPI1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
wdt0: watchdog@1c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
};
spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-spdif";
reg = <0x01c21000 0x400>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
resets = <&ccu RST_BUS_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma 2>;
dma-names = "tx";
status = "disabled";
};
pwm: pwm@1c21400 {
compatible = "allwinner,sun8i-h3-pwm";
reg = <0x01c21400 0x8>;
clocks = <&osc24M>;
#pwm-cells = <3>;
status = "disabled";
};
i2s0: i2s@1c22000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-i2s";
reg = <0x01c22000 0x400>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
clock-names = "apb", "mod";
dmas = <&dma 3>, <&dma 3>;
resets = <&ccu RST_BUS_I2S0>;
dma-names = "rx", "tx";
status = "disabled";
};
i2s1: i2s@1c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
clock-names = "apb", "mod";
dmas = <&dma 4>, <&dma 4>;
resets = <&ccu RST_BUS_I2S1>;
dma-names = "rx", "tx";
status = "disabled";
};
codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-codec";
reg = <0x01c22c00 0x400>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
clock-names = "apb", "codec";
resets = <&ccu RST_BUS_CODEC>;
dmas = <&dma 15>, <&dma 15>;
dma-names = "rx", "tx";
allwinner,codec-analog-controls = <&codec_analog>;
status = "disabled";
};
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
dmas = <&dma 6>, <&dma 6>;
dma-names = "rx", "tx";
status = "disabled";
};
uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
dmas = <&dma 7>, <&dma 7>;
dma-names = "rx", "tx";
status = "disabled";
};
uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
dmas = <&dma 8>, <&dma 8>;
dma-names = "rx", "tx";
status = "disabled";
};
uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART3>;
resets = <&ccu RST_BUS_UART3>;
dmas = <&dma 9>, <&dma 9>;
dma-names = "rx", "tx";
status = "disabled";
};
i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@1c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@1c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun8i-h3-dw-hdmi",
"allwinner,sun8i-a83t-dw-hdmi";
reg = <0x01ee0000 0x10000>;
reg-io-width = <1>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
<&ccu CLK_HDMI>;
clock-names = "iahb", "isfr", "tmds";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
phy-names = "hdmi-phy";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
reg = <0>;
hdmi_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_hdmi>;
};
};
hdmi_out: port@1 {
reg = <1>;
};
};
};
hdmi_phy: hdmi-phy@1ef0000 {
compatible = "allwinner,sun8i-h3-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
<&ccu 6>;
clock-names = "bus", "mod", "pll-0";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
#phy-cells = <0>;
};
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
r_ccu: clock@1f01400 {
compatible = "allwinner,sun8i-h3-r-ccu";
reg = <0x01f01400 0x100>;
clocks = <&osc24M>, <&osc32k>, <&iosc>,
<&ccu 9>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
};
codec_analog: codec-analog@1f015c0 {
compatible = "allwinner,sun8i-h3-codec-analog";
reg = <0x01f015c0 0x4>;
};
ir: ir@1f02000 {
compatible = "allwinner,sun5i-a13-ir";
clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
clock-names = "apb", "ir";
resets = <&r_ccu RST_APB0_IR>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01f02000 0x40>;
status = "disabled";
};
r_i2c: i2c@1f02400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01f02400 0x400>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&r_i2c_pins>;
clocks = <&r_ccu CLK_APB0_I2C>;
resets = <&r_ccu RST_APB0_I2C>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
ir_pins_a: ir {
pins = "PL11";
function = "s_cir_rx";
};
r_i2c_pins: r-i2c {
pins = "PL0", "PL1";
function = "s_i2c";
};
};
};
};

11
arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi
View File

@ -131,8 +131,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc_io>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
@ -140,6 +138,15 @@
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <&reg_vcc_io>;
bus-width = <8>;
non-removable;
status = "okay";
};
&ohci1 {
status = "okay";
};

10
arch/arm/include/asm/arch-sunxi/clock_sun6i.h
View File

@ -60,7 +60,11 @@ struct sunxi_ccm_reg {
u32 reserved11;
u32 sata_clk_cfg; /* 0xc8 SATA clock control (R40 only) */
u32 usb_clk_cfg; /* 0xcc USB clock control */
u32 gmac_clk_cfg; /* 0xd0 GMAC clock control */
#ifdef CONFIG_MACH_SUN8I_R40
u32 cir0_clk_cfg; /* 0xd0 CIR0 clock control (R40 only) */
#else
u32 gmac_clk_cfg; /* 0xd0 GMAC clock control (not for R40) */
#endif
u32 reserved12[7];
u32 mdfs_clk_cfg; /* 0xf0 MDFS clock control */
u32 dram_clk_cfg; /* 0xf4 DRAM configuration clock control */
@ -103,7 +107,11 @@ struct sunxi_ccm_reg {
u32 mtc_clk_cfg; /* 0x158 MTC module clock */
u32 mbus0_clk_cfg; /* 0x15c MBUS0 module clock */
u32 mbus1_clk_cfg; /* 0x160 MBUS1 module clock */
#ifdef CONFIG_MACH_SUN8I_R40
u32 gmac_clk_cfg; /* 0x164 GMAC clock control (R40 only) */
#else
u32 reserved16;
#endif
u32 mipi_dsi_clk_cfg; /* 0x168 MIPI DSI clock control */
u32 mipi_csi_clk_cfg; /* 0x16c MIPI CSI clock control */
u32 reserved17[4];

2
arch/arm/mach-sunxi/Kconfig
View File

@ -142,6 +142,8 @@ config MACH_SUN4I
bool "sun4i (Allwinner A10)"
select CPU_V7A
select ARM_CORTEX_CPU_IS_UP
select DM_MMC if MMC
select DM_SCSI if SCSI
select PHY_SUN4I_USB
select DRAM_SUN4I
select SUNXI_GEN_SUN4I

4
configs/Bananapi_M2_Ultra_defconfig
View File

@ -14,6 +14,10 @@ CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
CONFIG_SCSI_AHCI=y
CONFIG_AXP_DLDO4_VOLT=2500
CONFIG_AXP_ALDO2_VOLT=2500
CONFIG_AXP_ELDO3_VOLT=1200
CONFIG_SCSI=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_SUN8I_EMAC=y
CONFIG_RGMII=y
CONFIG_MACPWR="PA17"

1
configs/libretech_all_h3_cc_h2_plus_defconfig
View File

@ -5,6 +5,7 @@ CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881979
CONFIG_DRAM_ODT_EN=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-libretech-all-h3-cc"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set

1
configs/libretech_all_h3_cc_h3_defconfig
View File

@ -5,6 +5,7 @@ CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881979
CONFIG_DRAM_ODT_EN=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-libretech-all-h3-cc"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set

1
configs/libretech_all_h3_cc_h5_defconfig
View File

@ -5,6 +5,7 @@ CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881979
CONFIG_DRAM_ODT_EN=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h3-cc"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set

2
configs/sopine_baseboard_defconfig
View File

@ -10,7 +10,7 @@ CONFIG_DRAM_ODT_EN=y
CONFIG_MMC0_CD_PIN=""
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus"
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-sopine-baseboard"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

2
drivers/mmc/sunxi_mmc.c
View File

@ -637,7 +637,9 @@ static int sunxi_mmc_bind(struct udevice *dev)
}
static const struct udevice_id sunxi_mmc_ids[] = {
{ .compatible = "allwinner,sun4i-a10-mmc" },
{ .compatible = "allwinner,sun5i-a13-mmc" },
{ .compatible = "allwinner,sun7i-a20-mmc" },
{ }
};

111
drivers/net/sun8i_emac.c
View File

@ -65,11 +65,10 @@
#define AHB_GATE_OFFSET_EPHY 0
#if defined(CONFIG_MACH_SUNXI_H3_H5)
#define SUN8I_GPD8_GMAC 2
#else
#define SUN8I_GPD8_GMAC 4
#endif
/* IO mux settings */
#define SUN8I_IOMUX_H3 2
#define SUN8I_IOMUX_R40 5
#define SUN8I_IOMUX 4
/* H3/A64 EMAC Register's offset */
#define EMAC_CTL0 0x00
@ -99,6 +98,7 @@ enum emac_variant {
A83T_EMAC = 1,
H3_EMAC,
A64_EMAC,
R40_GMAC,
};
struct emac_dma_desc {
@ -280,6 +280,9 @@ static int sun8i_emac_set_syscon(struct emac_eth_dev *priv)
reg = readl(priv->sysctl_reg + 0x30);
if (priv->variant == R40_GMAC)
return 0;
if (priv->variant == H3_EMAC) {
ret = sun8i_emac_set_syscon_ephy(priv, &reg);
if (ret)
@ -453,6 +456,7 @@ static int _sun8i_emac_eth_init(struct emac_eth_dev *priv, u8 *enetaddr)
static int parse_phy_pins(struct udevice *dev)
{
struct emac_eth_dev *priv = dev_get_priv(dev);
int offset;
const char *pin_name;
int drive, pull = SUN4I_PINCTRL_NO_PULL, i;
@ -494,7 +498,13 @@ static int parse_phy_pins(struct udevice *dev)
if (pin < 0)
continue;
sunxi_gpio_set_cfgpin(pin, SUN8I_GPD8_GMAC);
if (priv->variant == H3_EMAC)
sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX_H3);
else if (priv->variant == R40_GMAC)
sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX_R40);
else
sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX);
if (drive != ~0)
sunxi_gpio_set_drv(pin, drive);
if (pull != ~0)
@ -618,22 +628,39 @@ static void sun8i_emac_board_setup(struct emac_eth_dev *priv)
{
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
#ifdef CONFIG_MACH_SUNXI_H3_H5
/* Only H3/H5 have clock controls for internal EPHY */
if (priv->use_internal_phy) {
/* Set clock gating for ephy */
setbits_le32(&ccm->bus_gate4, BIT(AHB_GATE_OFFSET_EPHY));
if (priv->variant == H3_EMAC) {
/* Only H3/H5 have clock controls for internal EPHY */
if (priv->use_internal_phy) {
/* Set clock gating for ephy */
setbits_le32(&ccm->bus_gate4,
BIT(AHB_GATE_OFFSET_EPHY));
/* Deassert EPHY */
setbits_le32(&ccm->ahb_reset2_cfg, BIT(AHB_RESET_OFFSET_EPHY));
/* Deassert EPHY */
setbits_le32(&ccm->ahb_reset2_cfg,
BIT(AHB_RESET_OFFSET_EPHY));
}
}
#endif
/* Set clock gating for emac */
setbits_le32(&ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_GMAC));
if (priv->variant == R40_GMAC) {
/* Set clock gating for emac */
setbits_le32(&ccm->ahb_reset1_cfg, BIT(AHB_RESET_OFFSET_GMAC));
/* De-assert EMAC */
setbits_le32(&ccm->ahb_reset0_cfg, BIT(AHB_RESET_OFFSET_GMAC));
/* De-assert EMAC */
setbits_le32(&ccm->ahb_gate1, BIT(AHB_GATE_OFFSET_GMAC));
/* Select RGMII for R40 */
setbits_le32(&ccm->gmac_clk_cfg,
CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
CCM_GMAC_CTRL_GPIT_RGMII);
setbits_le32(&ccm->gmac_clk_cfg,
CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY));
} else {
/* Set clock gating for emac */
setbits_le32(&ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_GMAC));
/* De-assert EMAC */
setbits_le32(&ccm->ahb_reset0_cfg, BIT(AHB_RESET_OFFSET_GMAC));
}
}
#if defined(CONFIG_DM_GPIO)
@ -800,22 +827,32 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
return -EINVAL;
}
offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon");
if (offset < 0) {
debug("%s: cannot find syscon node\n", __func__);
priv->variant = dev_get_driver_data(dev);
if (!priv->variant) {
printf("%s: Missing variant\n", __func__);
return -EINVAL;
}
reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL);
if (!reg) {
debug("%s: cannot find reg property in syscon node\n",
__func__);
return -EINVAL;
}
priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob,
offset, reg);
if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
debug("%s: Cannot find syscon base address\n", __func__);
return -EINVAL;
if (priv->variant != R40_GMAC) {
offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon");
if (offset < 0) {
debug("%s: cannot find syscon node\n", __func__);
return -EINVAL;
}
reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL);
if (!reg) {
debug("%s: cannot find reg property in syscon node\n",
__func__);
return -EINVAL;
}
priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob,
offset, reg);
if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
debug("%s: Cannot find syscon base address\n",
__func__);
return -EINVAL;
}
}
pdata->phy_interface = -1;
@ -840,14 +877,6 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
return -EINVAL;
}
priv->variant = dev_get_driver_data(dev);
if (!priv->variant) {
printf("%s: Missing variant '%s'\n", __func__,
(char *)priv->variant);
return -EINVAL;
}
if (priv->variant == H3_EMAC) {
int parent = fdt_parent_offset(gd->fdt_blob, offset);
@ -888,6 +917,8 @@ static const struct udevice_id sun8i_emac_eth_ids[] = {
.data = (uintptr_t)A64_EMAC },
{.compatible = "allwinner,sun8i-a83t-emac",
.data = (uintptr_t)A83T_EMAC },
{.compatible = "allwinner,sun8i-r40-gmac",
.data = (uintptr_t)R40_GMAC },
{ }
};

18
include/dt-bindings/clock/sun8i-de2.h Normal file
View File

@ -0,0 +1,18 @@
/*
* Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.io>
*
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
#ifndef _DT_BINDINGS_CLOCK_SUN8I_DE2_H_
#define _DT_BINDINGS_CLOCK_SUN8I_DE2_H_
#define CLK_BUS_MIXER0 0
#define CLK_BUS_MIXER1 1
#define CLK_BUS_WB 2
#define CLK_MIXER0 6
#define CLK_MIXER1 7
#define CLK_WB 8
#endif /* _DT_BINDINGS_CLOCK_SUN8I_DE2_H_ */

59
include/dt-bindings/clock/sun8i-r-ccu.h Normal file
View File

@ -0,0 +1,59 @@
/*
* Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#ifndef _DT_BINDINGS_CLK_SUN8I_R_CCU_H_
#define _DT_BINDINGS_CLK_SUN8I_R_CCU_H_
#define CLK_AR100 0
#define CLK_APB0_PIO 3
#define CLK_APB0_IR 4
#define CLK_APB0_TIMER 5
#define CLK_APB0_RSB 6
#define CLK_APB0_UART 7
/* 8 is reserved for CLK_APB0_W1 on A31 */
#define CLK_APB0_I2C 9
#define CLK_APB0_TWD 10
#define CLK_IR 11
#endif /* _DT_BINDINGS_CLK_SUN8I_R_CCU_H_ */

14
include/dt-bindings/reset/sun8i-de2.h Normal file
View File

@ -0,0 +1,14 @@
/*
* Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.io>
*
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
#ifndef _DT_BINDINGS_RESET_SUN8I_DE2_H_
#define _DT_BINDINGS_RESET_SUN8I_DE2_H_
#define RST_MIXER0 0
#define RST_MIXER1 1
#define RST_WB 2
#endif /* _DT_BINDINGS_RESET_SUN8I_DE2_H_ */

53
include/dt-bindings/reset/sun8i-r-ccu.h Normal file
View File

@ -0,0 +1,53 @@
/*
* Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#ifndef _DT_BINDINGS_RST_SUN8I_R_CCU_H_
#define _DT_BINDINGS_RST_SUN8I_R_CCU_H_
#define RST_APB0_IR 0
#define RST_APB0_TIMER 1
#define RST_APB0_RSB 2
#define RST_APB0_UART 3
/* 4 is reserved for RST_APB0_W1 on A31 */
#define RST_APB0_I2C 5
#endif /* _DT_BINDINGS_RST_SUN8I_R_CCU_H_ */