leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx

Browse Source
This commit is contained in:
Wolfgang Denk 2008-06-11 22:13:07 +02:00
commit 1730edf76c
89 changed files with 2783 additions and 5649 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
board/amcc/acadia/memory.c
View File

@ -33,14 +33,6 @@
extern void board_pll_init_f(void);
/*
* sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
*/
void sdram_init(void)
{
return;
}
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
static void cram_bcr_write(u32 wr_val)
{
@ -116,10 +108,3 @@ long int initdram(int board_type)
return (CFG_MBYTES_RAM << 20);
}
#ifndef CONFIG_NAND_SPL
int testdram(void)
{
return (0);
}
#endif

67
board/amcc/bamboo/bamboo.c
View File

@ -466,73 +466,6 @@ long int initdram (int board_type)
#endif
}
#if defined(CFG_DRAM_TEST)
int testdram(void)
{
unsigned long *mem = (unsigned long *)0;
const unsigned long kend = (1024 / sizeof(unsigned long));
unsigned long k, n, *p32, ctr;
const unsigned long bend = CFG_MBYTES_SDRAM * 1024 * 1024;
mtmsr(0);
for (k = 0; k < CFG_MBYTES_SDRAM*1024;
++k, mem += (1024 / sizeof(unsigned long))) {
if ((k & 1023) == 0) {
printf("%3d MB\r", k / 1024);
}
memset(mem, 0xaaaaaaaa, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0xaaaaaaaa) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
memset(mem, 0x55555555, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0x55555555) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
}
/*
* Perform a sequence test to ensure that all
* memory locations are uniquely addressable
*/
ctr = 0;
p32 = 0;
while ((unsigned long)p32 != bend) {
if (0 == ((unsigned long)p32 & ((1<<20)-1)))
printf("Writing %3d MB\r", (unsigned long)p32 >> 20);
*p32++ = ctr++;
}
ctr = 0;
p32 = 0;
while ((unsigned long)p32 != bend) {
if (0 == ((unsigned long)p32 & ((1<<20)-1)))
printf("Verifying %3d MB\r", (unsigned long)p32 >> 20);
if (*p32 != ctr) {
printf("SDRAM test fails at: %08x\n", p32);
return 1;
}
ctr++;
p32++;
}
printf("SDRAM test passes\n");
return 0;
}
#endif
/*************************************************************************
* pci_pre_init
*

16
board/amcc/bubinga/bubinga.c
View File

@ -66,14 +66,6 @@ int checkboard(void)
return (0);
}
/*
* sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
*/
void sdram_init(void)
{
return;
}
/* -------------------------------------------------------------------------
initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
the necessary info for SDRAM controller configuration
@ -85,11 +77,3 @@ long int initdram(int board_type)
ret = spd_sdram();
return ret;
}
int testdram(void)
{
/* TODO: XXX XXX XXX */
printf("test: xxx MB - ok\n");
return (0);
}

38
board/amcc/canyonlands/canyonlands.c
View File

@ -211,44 +211,6 @@ long int initdram(int board_type)
}
#endif
#if defined(CFG_DRAM_TEST)
int testdram(void)
{
unsigned long *mem = (unsigned long *)0;
const unsigned long kend = (1024 / sizeof(unsigned long));
unsigned long k, n;
mtmsr(0);
for (k = 0; k < CFG_KBYTES_SDRAM;
++k, mem += (1024 / sizeof(unsigned long))) {
if ((k & 1023) == 0) {
printf("%3d MB\r", k / 1024);
}
memset(mem, 0xaaaaaaaa, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0xaaaaaaaa) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
memset(mem, 0x55555555, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0x55555555) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
}
printf("SDRAM test passes\n");
return 0;
}
#endif
/*
* pci_target_init
*

30
board/amcc/ebony/ebony.c
View File

@ -116,36 +116,6 @@ long int initdram(int board_type)
return dram_size;
}
#if defined(CFG_DRAM_TEST)
int testdram(void)
{
uint *pstart = (uint *) 0x00000000;
uint *pend = (uint *) 0x08000000;
uint *p;
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
printf("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
for (p = pstart; p < pend; p++)
*p = 0x55555555;
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
printf("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
return 0;
}
#endif
#if !defined(CONFIG_SPD_EEPROM)
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.

30
board/amcc/katmai/katmai.c
View File

@ -258,36 +258,6 @@ u32 ddr_clktr(u32 default_val) {
return (SDRAM_CLKTR_CLKP_90_DEG_ADV);
}
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
uint *pstart = (uint *) 0x00000000;
uint *pend = (uint *) 0x08000000;
uint *p;
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
for (p = pstart; p < pend; p++)
*p = 0x55555555;
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
return 0;
}
#endif
/*************************************************************************
* pci_pre_init
*

3
board/amcc/kilauea/Makefile
View File

@ -25,8 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o cmd_pll.o memory.o
SOBJS = init.o
COBJS = $(BOARD).o cmd_pll.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))

154
board/amcc/kilauea/init.S
View File

@ -1,154 +0,0 @@
/*
* (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* Based on code provided from UDTech and AMCC
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <ppc4xx.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#define mtsdram_as(reg, value) \
addi r4,0,reg ; \
mtdcr memcfga,r4 ; \
addis r4,0,value@h ; \
ori r4,r4,value@l ; \
mtdcr memcfgd,r4 ;
.globl ext_bus_cntlr_init
ext_bus_cntlr_init:
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
/*
* DDR2 setup
*/
/* Following the DDR Core Manual, here is the initialization */
/* Step 1 */
/* Step 2 */
/* Step 3 */
/* base=00000000, size=256MByte (6), mode=7 (n*10*8) */
mtsdram_as(SDRAM_MB0CF, 0x00006701);
/* SET SDRAM_MB1CF - Not enabled */
mtsdram_as(SDRAM_MB1CF, 0x00000000);
/* SET SDRAM_MB2CF - Not enabled */
mtsdram_as(SDRAM_MB2CF, 0x00000000);
/* SET SDRAM_MB3CF - Not enabled */
mtsdram_as(SDRAM_MB3CF, 0x00000000);
/* SDRAM_CLKTR: Adv Addr clock by 180 deg */
mtsdram_as(SDRAM_CLKTR, 0x80000000);
/* Refresh Time register (0x30) Refresh every 7.8125uS */
mtsdram_as(SDRAM_RTR, 0x06180000);
/* SDRAM_SDTR1 */
mtsdram_as(SDRAM_SDTR1, 0x80201000);
/* SDRAM_SDTR2 */
mtsdram_as(SDRAM_SDTR2, 0x32204232);
/* SDRAM_SDTR3 */
mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
mtsdram_as(SDRAM_MMODE, 0x00000442);
mtsdram_as(SDRAM_MEMODE, 0x00000404);
/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
mtsdram_as(SDRAM_MCOPT1, 0x04322000);
/* NOP */
mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
/* precharge 3 DDR clock cycle */
mtsdram_as(SDRAM_INITPLR1, 0x81900400);
/* EMR2 twr = 2tck */
mtsdram_as(SDRAM_INITPLR2, 0x81020000);
/* EMR3 twr = 2tck */
mtsdram_as(SDRAM_INITPLR3, 0x81030000);
/* EMR DLL ENABLE twr = 2tck */
mtsdram_as(SDRAM_INITPLR4, 0x81010404);
/* MR w/ DLL reset
* Note: 5 is CL. May need to be changed
*/
mtsdram_as(SDRAM_INITPLR5, 0x81000542);
/* precharge 3 DDR clock cycle */
mtsdram_as(SDRAM_INITPLR6, 0x81900400);
/* Auto-refresh trfc = 26tck */
mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
/* Auto-refresh trfc = 26tck */
mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
/* Auto-refresh */
mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
/* Auto-refresh */
mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
mtsdram_as(SDRAM_INITPLR11, 0x81000442);
mtsdram_as(SDRAM_INITPLR12, 0x81010780);
mtsdram_as(SDRAM_INITPLR13, 0x81010400);
mtsdram_as(SDRAM_INITPLR14, 0x00000000);
mtsdram_as(SDRAM_INITPLR15, 0x00000000);
/* SET MCIF0_CODT Die Termination On */
mtsdram_as(SDRAM_CODT, 0x0080f837);
mtsdram_as(SDRAM_MODT0, 0x01800000);
mtsdram_as(SDRAM_MODT1, 0x00000000);
mtsdram_as(SDRAM_WRDTR, 0x00000000);
/* SDRAM0_MCOPT2 (0X21) Start initialization */
mtsdram_as(SDRAM_MCOPT2, 0x20000000);
/* Step 5 */
lis r3,0x1 /* 400000 = wait 100ms */
mtctr r3
pll_wait:
bdnz pll_wait
/* Step 6 */
/* SDRAM_DLCR */
mtsdram_as(SDRAM_DLCR, 0x030000a5);
/* SDRAM_RDCC */
mtsdram_as(SDRAM_RDCC, 0x40000000);
/* SDRAM_RQDC */
mtsdram_as(SDRAM_RQDC, 0x80000038);
/* SDRAM_RFDC */
mtsdram_as(SDRAM_RFDC, 0x00000209);
/* Enable memory controller */
mtsdram_as(SDRAM_MCOPT2, 0x28000000);
#endif /* #ifndef CONFIG_NAND_U_BOOT */
blr

79
board/amcc/kilauea/memory.c
View File

@ -1,79 +0,0 @@
/*
* (C) Copyright 2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <i2c.h>
void sdram_init(void)
{
return;
}
long int initdram(int board_type)
{
return (CFG_MBYTES_SDRAM << 20);
}
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
printf ("testdram\n");
#if defined (CONFIG_NAND_U_BOOT)
return 0;
#endif
uint *pstart = (uint *) 0x00000000;
uint *pend = (uint *) 0x00001000;
uint *p;
for (p = pstart; p < pend; p++) {
*p = 0xaaaaaaaa;
}
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
#if !defined (CONFIG_NAND_SPL)
printf ("SDRAM test fails at: %08x\n", (uint) p);
#endif
return 1;
}
}
for (p = pstart; p < pend; p++) {
*p = 0x55555555;
}
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
#if !defined (CONFIG_NAND_SPL)
printf ("SDRAM test fails at: %08x\n", (uint) p);
#endif
return 1;
}
}
#if !defined (CONFIG_NAND_SPL)
printf ("SDRAM test passed!!!\n");
#endif
return 0;
}
#endif

44
board/amcc/luan/luan.c
View File

@ -125,50 +125,6 @@ u32 ddr_clktr(u32 default_val) {
return (SDRAM_CLKTR_CLKP_180_DEG_ADV);
}
/*************************************************************************
* int testdram()
*
************************************************************************/
#if defined(CFG_DRAM_TEST)
int testdram(void)
{
unsigned long *mem = (unsigned long *) 0;
const unsigned long kend = (1024 / sizeof(unsigned long));
unsigned long k, n;
mtmsr(0);
for (k = 0; k < CFG_KBYTES_SDRAM;
++k, mem += (1024 / sizeof(unsigned long))) {
if ((k & 1023) == 0) {
printf("%3d MB\r", k / 1024);
}
memset(mem, 0xaaaaaaaa, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0xaaaaaaaa) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
memset(mem, 0x55555555, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0x55555555) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
}
printf("SDRAM test passes\n");
return 0;
}
#endif
/*************************************************************************
* pci_pre_init
*

2
board/amcc/makalu/Makefile
View File

@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o cmd_pll.o memory.o
COBJS = $(BOARD).o cmd_pll.o
SOBJS = init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)

125
board/amcc/makalu/init.S
View File

@ -1,8 +1,11 @@
/*
* Copyright (c) 2008 Nuovation System Designs, LLC
* Grant Erickson <gerickson@nuovations.com>
*
* (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* Based on code provided from Senao and AMCC
* Originally based on code provided from Senao and AMCC
*
* See file CREDITS for list of people who contributed to this
* project.
@ -23,126 +26,6 @@
* MA 02111-1307 USA
*/
#include <config.h>
#include <ppc4xx.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#define mtsdram_as(reg, value) \
addi r4,0,reg ; \
mtdcr memcfga,r4 ; \
addis r4,0,value@h ; \
ori r4,r4,value@l ; \
mtdcr memcfgd,r4 ;
.globl ext_bus_cntlr_init
ext_bus_cntlr_init:
/*
* DDR2 setup
*/
/* Following the DDR Core Manual, here is the initialization */
/* Step 1 */
/* Step 2 */
/* Step 3 */
/* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
mtsdram_as(SDRAM_MB0CF, 0x00005201);
/* base=08000000, size=128MByte (5), mode=2 (n*10*4) */
mtsdram_as(SDRAM_MB1CF, (0x08000000 >> 3) | 0x5201);
/* SDRAM_CLKTR: Adv Addr clock by 180 deg */
mtsdram_as(SDRAM_CLKTR,0x80000000);
/* Refresh Time register (0x30) Refresh every 7.8125uS */
mtsdram_as(SDRAM_RTR, 0x06180000);
/* SDRAM_SDTR1 */
mtsdram_as(SDRAM_SDTR1, 0x80201000);
/* SDRAM_SDTR2 */
mtsdram_as(SDRAM_SDTR2, 0x32204232);
/* SDRAM_SDTR3 */
mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
mtsdram_as(SDRAM_MMODE, 0x00000442);
mtsdram_as(SDRAM_MEMODE, 0x00000404);
/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
mtsdram_as(SDRAM_MCOPT1, 0x04322000);
/* NOP */
mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
/* precharge 3 DDR clock cycle */
mtsdram_as(SDRAM_INITPLR1, 0x81900400);
/* EMR2 twr = 2tck */
mtsdram_as(SDRAM_INITPLR2, 0x81020000);
/* EMR3 twr = 2tck */
mtsdram_as(SDRAM_INITPLR3, 0x81030000);
/* EMR DLL ENABLE twr = 2tck */
mtsdram_as(SDRAM_INITPLR4, 0x81010404);
/* MR w/ DLL reset
* Note: 5 is CL. May need to be changed
*/
mtsdram_as(SDRAM_INITPLR5, 0x81000542);
/* precharge 3 DDR clock cycle */
mtsdram_as(SDRAM_INITPLR6, 0x81900400);
/* Auto-refresh trfc = 26tck */
mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
/* Auto-refresh trfc = 26tck */
mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
/* Auto-refresh */
mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
/* Auto-refresh */
mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
mtsdram_as(SDRAM_INITPLR11, 0x81000442);
mtsdram_as(SDRAM_INITPLR12, 0x81010780);
mtsdram_as(SDRAM_INITPLR13, 0x81010400);
mtsdram_as(SDRAM_INITPLR14, 0x00000000);
mtsdram_as(SDRAM_INITPLR15, 0x00000000);
/* SET MCIF0_CODT Die Termination On */
mtsdram_as(SDRAM_CODT, 0x0080f837);
mtsdram_as(SDRAM_MODT0, 0x01800000);
#if 0 /* test-only: not sure if 0 is ok when 2nd bank is used */
mtsdram_as(SDRAM_MODT1, 0x00000000);
#endif
mtsdram_as(SDRAM_WRDTR, 0x00000000);
/* SDRAM0_MCOPT2 (0X21) Start initialization */
mtsdram_as(SDRAM_MCOPT2, 0x20000000);
/* Step 5 */
lis r3,0x1 /* 400000 = wait 100ms */
mtctr r3
pll_wait:
bdnz pll_wait
/* Step 6 */
/* SDRAM_DLCR */
mtsdram_as(SDRAM_DLCR, 0x030000a5);
/* SDRAM_RDCC */
mtsdram_as(SDRAM_RDCC, 0x40000000);
/* SDRAM_RQDC */
mtsdram_as(SDRAM_RQDC, 0x80000038);
/* SDRAM_RFDC */
mtsdram_as(SDRAM_RFDC, 0x00000209);
/* Enable memory controller */
mtsdram_as(SDRAM_MCOPT2, 0x28000000);
blr

188
board/amcc/makalu/memory.c
View File

@ -1,188 +0,0 @@
/*
* (C) Copyright 2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
void sdram_init(void)
{
return;
}
long int initdram(int board_type)
{
/*
* Same as on Kilauea, Makalu generates exception 0x200
* (machine check) after trap_init() in board_init_f,
* when SDRAM is initialized here (late) and d-cache is
* used earlier as INIT_RAM.
* So for now, initialize DDR2 in init.S very early and
* also use it for INIT_RAM. Then this exception doesn't
* occur.
*/
#if 0
u32 val;
/* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
mtsdram(SDRAM_MB0CF, 0x00005201);
/* SET SDRAM_MB1CF - Not enabled */
mtsdram(SDRAM_MB1CF, 0x00000000);
/* SET SDRAM_MB2CF - Not enabled */
mtsdram(SDRAM_MB2CF, 0x00000000);
/* SET SDRAM_MB3CF - Not enabled */
mtsdram(SDRAM_MB3CF, 0x00000000);
/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
mtsdram(SDRAM_CLKTR, 0x80000000);
/* Refresh Time register (0x30) Refresh every 7.8125uS */
mtsdram(SDRAM_RTR, 0x06180000);
/* SDRAM_SDTR1 */
mtsdram(SDRAM_SDTR1, 0x80201000);
/* SDRAM_SDTR2 */
mtsdram(SDRAM_SDTR2, 0x32204232);
/* SDRAM_SDTR3 */
mtsdram(SDRAM_SDTR3, 0x080b0d1a);
mtsdram(SDRAM_MMODE, 0x00000442);
mtsdram(SDRAM_MEMODE, 0x00000404);
/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
mtsdram(SDRAM_MCOPT1, 0x04322000);
/* NOP */
mtsdram(SDRAM_INITPLR0, 0xa8380000);
/* precharge 3 DDR clock cycle */
mtsdram(SDRAM_INITPLR1, 0x81900400);
/* EMR2 twr = 2tck */
mtsdram(SDRAM_INITPLR2, 0x81020000);
/* EMR3 twr = 2tck */
mtsdram(SDRAM_INITPLR3, 0x81030000);
/* EMR DLL ENABLE twr = 2tck */
mtsdram(SDRAM_INITPLR4, 0x81010404);
/* MR w/ DLL reset
* Note: 5 is CL. May need to be changed
*/
mtsdram(SDRAM_INITPLR5, 0x81000542);
/* precharge 3 DDR clock cycle */
mtsdram(SDRAM_INITPLR6, 0x81900400);
/* Auto-refresh trfc = 26tck */
mtsdram(SDRAM_INITPLR7, 0x8D080000);
/* Auto-refresh trfc = 26tck */
mtsdram(SDRAM_INITPLR8, 0x8D080000);
/* Auto-refresh */
mtsdram(SDRAM_INITPLR9, 0x8D080000);
/* Auto-refresh */
mtsdram(SDRAM_INITPLR10, 0x8D080000);
/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
mtsdram(SDRAM_INITPLR11, 0x81000442);
mtsdram(SDRAM_INITPLR12, 0x81010780);
mtsdram(SDRAM_INITPLR13, 0x81010400);
mtsdram(SDRAM_INITPLR14, 0x00000000);
mtsdram(SDRAM_INITPLR15, 0x00000000);
/* SET MCIF0_CODT Die Termination On */
mtsdram(SDRAM_CODT, 0x0080f837);
mtsdram(SDRAM_MODT0, 0x01800000);
mtsdram(SDRAM_MODT1, 0x00000000);
mtsdram(SDRAM_WRDTR, 0x00000000);
/* SDRAM0_MCOPT2 (0X21) Start initialization */
mtsdram(SDRAM_MCOPT2, 0x20000000);
/* Step 5 */
do {
mfsdram(SDRAM_MCSTAT, val);
} while ((val & SDRAM_MCSTAT_MIC_COMP) != SDRAM_MCSTAT_MIC_COMP);
/* Step 6 */
/* SDRAM_DLCR */
mtsdram(SDRAM_DLCR, 0x030000a5);
/* SDRAM_RDCC */
mtsdram(SDRAM_RDCC, 0x40000000);
/* SDRAM_RQDC */
mtsdram(SDRAM_RQDC, 0x80000038);
/* SDRAM_RFDC */
mtsdram(SDRAM_RFDC, 0x00000209);
/* Enable memory controller */
mfsdram(SDRAM_MCOPT2, val);
val |= SDRAM_MCOPT2_DCEN_ENABLE;
mtsdram(SDRAM_MCOPT2, val);
#endif
return (CFG_MBYTES_SDRAM << 20);
}
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
printf ("testdram\n");
#if defined (CONFIG_NAND_U_BOOT)
return 0;
#endif
uint *pstart = (uint *) 0x00000000;
uint *pend = (uint *) 0x00001000;
uint *p;
for (p = pstart; p < pend; p++) {
*p = 0xaaaaaaaa;
}
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
#if !defined (CONFIG_NAND_SPL)
printf ("SDRAM test fails at: %08x\n", (uint) p);
#endif
return 1;
}
}
for (p = pstart; p < pend; p++) {
*p = 0x55555555;
}
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
#if !defined (CONFIG_NAND_SPL)
printf ("SDRAM test fails at: %08x\n", (uint) p);
#endif
return 1;
}
}
#if !defined (CONFIG_NAND_SPL)
printf ("SDRAM test passed!!!\n");
#endif
return 0;
}
#endif

30
board/amcc/ocotea/ocotea.c
View File

@ -214,36 +214,6 @@ long int initdram (int board_type)
}
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
uint *pstart = (uint *) 0x00000000;
uint *pend = (uint *) 0x08000000;
uint *p;
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
for (p = pstart; p < pend; p++)
*p = 0x55555555;
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
return 0;
}
#endif
#if !defined(CONFIG_SPD_EEPROM)
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.

4
board/amcc/sequoia/config.mk
View File

@ -28,6 +28,10 @@ sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
TEXT_BASE = 0xFFFA0000
#
# When defining CONFIG_VIDEO, TEXT_BASE needs to be 0xFFF80000
# TEXT_BASE = 0xFFF80000
#
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1

38
board/amcc/sequoia/sequoia.c
View File

@ -329,44 +329,6 @@ int checkboard(void)
return (0);
}
#if defined(CFG_DRAM_TEST)
int testdram(void)
{
unsigned long *mem = (unsigned long *)0;
const unsigned long kend = (1024 / sizeof(unsigned long));
unsigned long k, n;
mtmsr(0);
for (k = 0; k < CFG_MBYTES_SDRAM;
++k, mem += (1024 / sizeof(unsigned long))) {
if ((k & 1023) == 0) {
printf("%3d MB\r", k / 1024);
}
memset(mem, 0xaaaaaaaa, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0xaaaaaaaa) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
memset(mem, 0x55555555, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0x55555555) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
}
printf("SDRAM test passes\n");
return 0;
}
#endif
#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
/*
* Assign interrupts to PCI devices.

42
board/amcc/taihu/taihu.c
View File

@ -200,45 +200,3 @@ int pci_pre_init(struct pci_controller *hose)
return 1;
}
#endif /* CONFIG_PCI */
#ifdef CFG_DRAM_TEST
int testdram(void)
{
unsigned long *mem = (unsigned long *)0;
const unsigned long kend = (1024 / sizeof(unsigned long));
unsigned long k, n;
unsigned long msr;
unsigned long total_kbytes = CFG_SDRAM_SIZE_PER_BANK * CFG_SDRAM_BANKS / 1024;
msr = mfmsr();
mtmsr(msr & ~(MSR_EE));
for (k = 0; k < total_kbytes ;
++k, mem += (1024 / sizeof(unsigned long))) {
if ((k & 1023) == 0)
printf("%3d MB\r", k / 1024);
memset(mem, 0xaaaaaaaa, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0xaaaaaaaa) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
memset(mem, 0x55555555, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0x55555555) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
}
printf("SDRAM test passes\n");
mtmsr(msr);
return 0;
}
#endif /* CFG_DRAM_TEST */

30
board/amcc/taishan/taishan.c
View File

@ -196,36 +196,6 @@ int checkboard (void)
return (0);
}
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
uint *pstart = (uint *) 0x04000000;
uint *pend = (uint *) 0x0fc00000;
uint *p;
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
for (p = pstart; p < pend; p++)
*p = 0x55555555;
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
return 0;
}
#endif
/*************************************************************************
* pci_pre_init
*

16
board/amcc/walnut/walnut.c
View File

@ -85,14 +85,6 @@ int checkboard(void)
return (0);
}
/*
* sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
*/
void sdram_init(void)
{
return;
}
/*
* initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
* the necessary info for SDRAM controller configuration
@ -101,11 +93,3 @@ long int initdram(int board_type)
{
return spd_sdram();
}
int testdram(void)
{
/* TODO: XXX XXX XXX */
printf("test: xxx MB - ok\n");
return (0);
}

52
board/amcc/yosemite/yosemite.c
View File

@ -200,7 +200,7 @@ int checkboard(void)
}
/*************************************************************************
* sdram_init -- doesn't use serial presence detect.
* initdram -- doesn't use serial presence detect.
*
* Assumes: 256 MB, ECC, non-registered
* PLB @ 133 MHz
@ -281,7 +281,7 @@ void sdram_tr1_set(int ram_address, int* tr1_value)
*tr1_value = (first_good + last_bad) / 2;
}
void sdram_init(void)
long int initdram(int board)
{
register uint reg;
int tr1_bank1, tr1_bank2;
@ -327,57 +327,11 @@ void sdram_init(void)
sdram_tr1_set(0x00000000, &tr1_bank1);
sdram_tr1_set(0x08000000, &tr1_bank2);
mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) );
}
mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800));
/*************************************************************************
* long int initdram
*
************************************************************************/
long int initdram(int board)
{
sdram_init();
return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */
}
#if defined(CFG_DRAM_TEST)
int testdram(void)
{
unsigned long *mem = (unsigned long *)0;
const unsigned long kend = (1024 / sizeof(unsigned long));
unsigned long k, n;
mtmsr(0);
for (k = 0; k < CFG_KBYTES_SDRAM;
++k, mem += (1024 / sizeof(unsigned long))) {
if ((k & 1023) == 0) {
printf("%3d MB\r", k / 1024);
}
memset(mem, 0xaaaaaaaa, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0xaaaaaaaa) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
memset(mem, 0x55555555, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0x55555555) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
}
printf("SDRAM test passes\n");
return 0;
}
#endif
/*************************************************************************
* pci_pre_init
*

30
board/amcc/yucca/yucca.c
View File

@ -586,36 +586,6 @@ u32 ddr_clktr(u32 default_val) {
return default_val;
}
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
uint *pstart = (uint *) 0x00000000;
uint *pend = (uint *) 0x08000000;
uint *p;
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
for (p = pstart; p < pend; p++)
*p = 0x55555555;
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
return 0;
}
#endif
/*************************************************************************
* pci_pre_init
*

4
board/amirix/ap1000/init.S
View File

@ -28,7 +28,3 @@
.globl ext_bus_cntlr_init
ext_bus_cntlr_init:
blr
.globl sdram_init
sdram_init:
blr

11
board/cray/L1/init.S
View File

@ -134,14 +134,3 @@ ext_bus_cntlr_init:
mtdcr ebccfgd,r4
blr
/*----------------------------------------------------------------------------- */
/* Function: sdram_init */
/* Description: Configures SDRAM memory banks. */
/* NOTE: for CrayL1 we have ECC memory, so enable it. */
/*....now done in C in L1.c:init_sdram for readability. */
/*----------------------------------------------------------------------------- */
.globl sdram_init
sdram_init:
blr

9
board/csb272/csb272.c
View File

@ -27,6 +27,8 @@
#include <miiphy.h>
#include <ppc4xx_enet.h>
void sdram_init(void);
/*
* Configuration data for AMIS FS6377-01 Programmable 3-PLL Clock Generator
*
@ -124,6 +126,13 @@ long initdram (int board_type)
ulong bank_size;
ulong tmp;
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
* in cpu/ppc4xx
*/
sdram_init();
tot_size = 0;
mtdcr (memcfga, mem_mb0cf);

9
board/csb472/csb472.c
View File

@ -27,6 +27,8 @@
#include <miiphy.h>
#include <ppc4xx_enet.h>
void sdram_init(void);
/*
* board_early_init_f: do early board initialization
*
@ -92,6 +94,13 @@ long initdram (int board_type)
ulong bank_size;
ulong tmp;
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
* in cpu/ppc4xx
*/
sdram_init();
tot_size = 0;
mtdcr (memcfga, mem_mb0cf);

8
board/eric/eric.c
View File

@ -31,6 +31,8 @@
#define PPC405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */
#define PPC405GP_GPIO0_IR 0xef60071c /* GPIO Input */
void sdram_init(void);
int board_early_init_f (void)
{
@ -127,6 +129,12 @@ long int initdram (int board_type)
int TotalSize;
#endif
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
* in cpu/ppc4xx
*/
sdram_init();
#ifdef CONFIG_ERIC
/*

22
board/esd/ar405/ar405.c
View File

@ -190,28 +190,6 @@ int checkboard (void)
return 0;
}
/* ------------------------------------------------------------------------- */
long int initdram (int board_type)
{
unsigned long val;
mtdcr(memcfga, mem_mb0cf);
val = mfdcr(memcfgd);
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
}
/* ------------------------------------------------------------------------- */
int testdram (void)
{
/* TODO: XXX XXX XXX */
printf ("test: 16 MB - ok\n");
return (0);
}
#if 1 /* test-only: some internal test routines... */
/*

19
board/esd/canbt/canbt.c
View File

@ -181,22 +181,3 @@ int checkboard (void)
return 0;
}
/* ------------------------------------------------------------------------- */
long int initdram (int board_type)
{
return (16 * 1024 * 1024);
}
/* ------------------------------------------------------------------------- */
int testdram (void)
{
/* TODO: XXX XXX XXX */
printf ("test: 16 MB - ok\n");
return (0);
}
/* ------------------------------------------------------------------------- */

9
board/exbitgen/exbitgen.c
View File

@ -3,6 +3,8 @@
#include <common.h>
#include "exbitgen.h"
void sdram_init(void);
/* ************************************************************************ */
int board_early_init_f (void)
/* ------------------------------------------------------------------------ --
@ -83,6 +85,13 @@ long int initdram (int board_type)
ulong bank_size;
ulong tmp;
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
* in cpu/ppc4xx
*/
sdram_init();
tot_size = 0;
mtdcr (memcfga, mem_mb0cf);

35
board/g2000/g2000.c
View File

@ -149,41 +149,6 @@ long int initdram (int board_type)
}
#if 1 /* test-only */
void sdram_init(void)
{
init_sdram_static_settings();
}
#endif
#if 0 /* test-only */
long int initdram (int board_type)
{
unsigned long val;
mtdcr(memcfga, mem_mb0cf);
val = mfdcr(memcfgd);
#if 0
printf("\nmb0cf=%x\n", val); /* test-only */
printf("strap=%x\n", mfdcr(strap)); /* test-only */
#endif
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
}
#endif
int testdram (void)
{
/* TODO: XXX XXX XXX */
printf ("test: 16 MB - ok\n");
return (0);
}
#if defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand_legacy.h>
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];

10
board/jse/init.S
View File

@ -93,13 +93,3 @@ ext_bus_cntlr_init:
mtdcr ebccfgd,r4
blr
/*----------------------------------------------------------------------- */
/* Function: sdram_init */
/* Description: This function is called by cpu/ppc4xx/start.S code */
/* to get the SDRAM initialized. */
/*----------------------------------------------------------------------- */
.globl sdram_init
sdram_init:
blr

38
board/lwmon5/lwmon5.c
View File

@ -275,44 +275,6 @@ int checkboard(void)
return (0);
}
#if defined(CFG_DRAM_TEST)
int testdram(void)
{
unsigned long *mem = (unsigned long *)0;
const unsigned long kend = (1024 / sizeof(unsigned long));
unsigned long k, n;
mtmsr(0);
for (k = 0; k < CFG_MBYTES_SDRAM;
++k, mem += (1024 / sizeof(unsigned long))) {
if ((k & 1023) == 0) {
printf("%3d MB\r", k / 1024);
}
memset(mem, 0xaaaaaaaa, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0xaaaaaaaa) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
memset(mem, 0x55555555, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0x55555555) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
}
printf("SDRAM test passes\n");
return 0;
}
#endif
/*************************************************************************
* pci_pre_init
*

4
board/ml2/init.S
View File

@ -28,7 +28,3 @@
.globl ext_bus_cntlr_init
ext_bus_cntlr_init:
blr
.globl sdram_init
sdram_init:
blr

13
board/mpl/mip405/init.S
View File

@ -178,19 +178,6 @@ ext_bus_cntlr_init:
nop /* pass2 DCR errata #8 */
blr
/*-----------------------------------------------------------------------------
* Function: sdram_init
* Description: Configures the internal SRAM memory. and setup the
* Stackpointer in it.
*----------------------------------------------------------------------------- */
.globl sdram_init
sdram_init:
blr
#if defined(CONFIG_BOOT_PCI)
.section .bootpg,"ax"
.globl _start_pci

13
board/mpl/pip405/init.S
View File

@ -175,19 +175,6 @@
nop /* pass2 DCR errata #8 */
blr
/*-----------------------------------------------------------------------------
* Function: sdram_init
* Description: Configures the internal SRAM memory. and setup the
* Stackpointer in it.
*----------------------------------------------------------------------------- */
.globl sdram_init
sdram_init:
blr
#if defined(CONFIG_BOOT_PCI)
.section .bootpg,"ax"
.globl _start_pci

9
board/netstal/hcu4/hcu4.c
View File

@ -120,15 +120,6 @@ void hcu_led_set(u32 value)
out_be32((u32 *)GPIO0_OR, tmp);
}
/*
* sdram_init - Dummy implementation for start.S, spd_sdram or initdram
* used for HCUx
*/
void sdram_init(void)
{
return;
}
/*
* hcu_get_slot
*/

26
board/netstal/hcu5/sdram.c
View File

@ -40,28 +40,6 @@
void hcu_led_set(u32 value);
void dcbz_area(u32 start_address, u32 num_bytes);
#define DDR_DCR_BASE 0x10
#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */
#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */
#define DDR0_01_INT_MASK_MASK 0x000000FF
#define DDR0_00_INT_ACK_ALL 0x7F000000
#define DDR0_01_INT_MASK_ALL_ON 0x000000FF
#define DDR0_01_INT_MASK_ALL_OFF 0x00000000
#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */
#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000
#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000
#define DDR0_22 0x16
/* ECC */
#define DDR0_22_CTRL_RAW_MASK 0x03000000
#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not enabled */
#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC no correction */
#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* Not a ECC RAM*/
#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC correcting on */
#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
#define ECC_RAM 0x03267F0B
#define NO_ECC_RAM 0x00267F0B
@ -111,11 +89,11 @@ static int wait_for_dlllock(void)
/* -----------------------------------------------------------+
* Wait for the DCC master delay line to finish calibration
* ----------------------------------------------------------*/
mtdcr(ddrcfga, DDR0_17);
mtdcr(memcfga, DDR0_17);
val = DDR0_17_DLLLOCKREG_UNLOCKED;
while (wait != 0xffff) {
val = mfdcr(ddrcfgd);
val = mfdcr(memcfgd);
if ((val & DDR0_17_DLLLOCKREG_MASK) ==
DDR0_17_DLLLOCKREG_LOCKED)
/* dlllockreg bit on */

9
board/netstal/mcu25/mcu25.c
View File

@ -127,15 +127,6 @@ void hcu_led_set(u32 value)
out_be16((u16 *)MCU25_LED_REGISTER_ADDRESS, value);
}
/*
* sdram_init - Dummy implementation for start.S, spd_sdram or initdram
* used for HCUx
*/
void sdram_init(void)
{
return;
}
/*
* hcu_get_slot
*/

38
board/pcs440ep/pcs440ep.c
View File

@ -553,44 +553,6 @@ long int initdram (int board_type)
return dram_size;
}
#if defined(CFG_DRAM_TEST)
int testdram(void)
{
unsigned long *mem = (unsigned long *)0;
const unsigned long kend = (1024 / sizeof(unsigned long));
unsigned long k, n;
mtmsr(0);
for (k = 0; k < CFG_KBYTES_SDRAM;
++k, mem += (1024 / sizeof(unsigned long))) {
if ((k & 1023) == 0) {
printf("%3d MB\r", k / 1024);
}
memset(mem, 0xaaaaaaaa, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0xaaaaaaaa) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
memset(mem, 0x55555555, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0x55555555) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
}
printf("SDRAM test passes\n");
return 0;
}
#endif
/*************************************************************************
* pci_pre_init
*

30
board/prodrive/alpr/alpr.c
View File

@ -132,36 +132,6 @@ int checkboard (void)
return (0);
}
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
uint *pstart = (uint *) 0x00000000;
uint *pend = (uint *) 0x08000000;
uint *p;
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
for (p = pstart; p < pend; p++)
*p = 0x55555555;
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
return 0;
}
#endif
/*************************************************************************
* pci_pre_init
*

8
board/w7o/w7o.c
View File

@ -31,6 +31,7 @@
#include <watchdog.h>
unsigned long get_dram_size (void);
void sdram_init(void);
/*
* Macros to transform values
@ -153,6 +154,13 @@ int checkboard (void)
long int initdram (int board_type)
{
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
* in cpu/ppc4xx
*/
sdram_init();
return get_dram_size ();
}

4
board/xilinx/ml300/init.S
View File

@ -42,7 +42,3 @@
.globl ext_bus_cntlr_init
ext_bus_cntlr_init:
blr
.globl sdram_init
sdram_init:
blr

45
board/zeus/zeus.c
View File

@ -213,51 +213,6 @@ long int initdram (int board_type)
return detect_sdram_size();
}
#if defined(CFG_DRAM_TEST)
int testdram(void)
{
unsigned long *mem = (unsigned long *)0;
const unsigned long kend = (1024 / sizeof(unsigned long));
unsigned long k, n;
unsigned long msr;
unsigned long total_kbytes;
total_kbytes = detect_sdram_size();
msr = mfmsr();
mtmsr(msr & ~(MSR_EE));
for (k = 0; k < total_kbytes ;
++k, mem += (1024 / sizeof(unsigned long))) {
if ((k & 1023) == 0) {
printf("%3d MB\r", k / 1024);
}
memset(mem, 0xaaaaaaaa, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0xaaaaaaaa) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
memset(mem, 0x55555555, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0x55555555) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
}
printf("SDRAM test passes\n");
mtmsr(msr);
return 0;
}
#endif
static int default_env_var(char *buf, char *var)
{
char *ptr;

200
cpu/ppc4xx/44x_spd_ddr.c
View File

@ -53,6 +53,8 @@
#include <ppc4xx.h>
#include <asm/mmu.h>
#include "ecc.h"
#if defined(CONFIG_SPD_EEPROM) && \
(defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR))
@ -79,157 +81,6 @@ void __spd_ddr_init_hang (void)
}
void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
/*-----------------------------------------------------------------------------
| Memory Controller Options 0
+-----------------------------------------------------------------------------*/
#define SDRAM_CFG0_DCEN 0x80000000 /* SDRAM Controller Enable */
#define SDRAM_CFG0_MCHK_MASK 0x30000000 /* Memory data errchecking mask */
#define SDRAM_CFG0_MCHK_NON 0x00000000 /* No ECC generation */
#define SDRAM_CFG0_MCHK_GEN 0x20000000 /* ECC generation */
#define SDRAM_CFG0_MCHK_CHK 0x30000000 /* ECC generation and checking */
#define SDRAM_CFG0_RDEN 0x08000000 /* Registered DIMM enable */
#define SDRAM_CFG0_PMUD 0x04000000 /* Page management unit */
#define SDRAM_CFG0_DMWD_MASK 0x02000000 /* DRAM width mask */
#define SDRAM_CFG0_DMWD_32 0x00000000 /* 32 bits */
#define SDRAM_CFG0_DMWD_64 0x02000000 /* 64 bits */
#define SDRAM_CFG0_UIOS_MASK 0x00C00000 /* Unused IO State */
#define SDRAM_CFG0_PDP 0x00200000 /* Page deallocation policy */
/*-----------------------------------------------------------------------------
| Memory Controller Options 1
+-----------------------------------------------------------------------------*/
#define SDRAM_CFG1_SRE 0x80000000 /* Self-Refresh Entry */
#define SDRAM_CFG1_PMEN 0x40000000 /* Power Management Enable */
/*-----------------------------------------------------------------------------+
| SDRAM DEVPOT Options
+-----------------------------------------------------------------------------*/
#define SDRAM_DEVOPT_DLL 0x80000000
#define SDRAM_DEVOPT_DS 0x40000000
/*-----------------------------------------------------------------------------+
| SDRAM MCSTS Options
+-----------------------------------------------------------------------------*/
#define SDRAM_MCSTS_MRSC 0x80000000
#define SDRAM_MCSTS_SRMS 0x40000000
#define SDRAM_MCSTS_CIS 0x20000000
/*-----------------------------------------------------------------------------
| SDRAM Refresh Timer Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RTR_RINT_MASK 0xFFFF0000
#define SDRAM_RTR_RINT_ENCODE(n) (((n) << 16) & SDRAM_RTR_RINT_MASK)
#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
/*-----------------------------------------------------------------------------+
| SDRAM UABus Base Address Reg
+-----------------------------------------------------------------------------*/
#define SDRAM_UABBA_UBBA_MASK 0x0000000F
/*-----------------------------------------------------------------------------+
| Memory Bank 0-7 configuration
+-----------------------------------------------------------------------------*/
#define SDRAM_BXCR_SDBA_MASK 0xff800000 /* Base address */
#define SDRAM_BXCR_SDSZ_MASK 0x000e0000 /* Size */
#define SDRAM_BXCR_SDSZ_8 0x00020000 /* 8M */
#define SDRAM_BXCR_SDSZ_16 0x00040000 /* 16M */
#define SDRAM_BXCR_SDSZ_32 0x00060000 /* 32M */
#define SDRAM_BXCR_SDSZ_64 0x00080000 /* 64M */
#define SDRAM_BXCR_SDSZ_128 0x000a0000 /* 128M */
#define SDRAM_BXCR_SDSZ_256 0x000c0000 /* 256M */
#define SDRAM_BXCR_SDSZ_512 0x000e0000 /* 512M */
#define SDRAM_BXCR_SDAM_MASK 0x0000e000 /* Addressing mode */
#define SDRAM_BXCR_SDAM_1 0x00000000 /* Mode 1 */
#define SDRAM_BXCR_SDAM_2 0x00002000 /* Mode 2 */
#define SDRAM_BXCR_SDAM_3 0x00004000 /* Mode 3 */
#define SDRAM_BXCR_SDAM_4 0x00006000 /* Mode 4 */
#define SDRAM_BXCR_SDBE 0x00000001 /* Memory Bank Enable */
/*-----------------------------------------------------------------------------+
| SDRAM TR0 Options
+-----------------------------------------------------------------------------*/
#define SDRAM_TR0_SDWR_MASK 0x80000000
#define SDRAM_TR0_SDWR_2_CLK 0x00000000
#define SDRAM_TR0_SDWR_3_CLK 0x80000000
#define SDRAM_TR0_SDWD_MASK 0x40000000
#define SDRAM_TR0_SDWD_0_CLK 0x00000000
#define SDRAM_TR0_SDWD_1_CLK 0x40000000
#define SDRAM_TR0_SDCL_MASK 0x01800000
#define SDRAM_TR0_SDCL_2_0_CLK 0x00800000
#define SDRAM_TR0_SDCL_2_5_CLK 0x01000000
#define SDRAM_TR0_SDCL_3_0_CLK 0x01800000
#define SDRAM_TR0_SDPA_MASK 0x000C0000
#define SDRAM_TR0_SDPA_2_CLK 0x00040000
#define SDRAM_TR0_SDPA_3_CLK 0x00080000
#define SDRAM_TR0_SDPA_4_CLK 0x000C0000
#define SDRAM_TR0_SDCP_MASK 0x00030000
#define SDRAM_TR0_SDCP_2_CLK 0x00000000
#define SDRAM_TR0_SDCP_3_CLK 0x00010000
#define SDRAM_TR0_SDCP_4_CLK 0x00020000
#define SDRAM_TR0_SDCP_5_CLK 0x00030000
#define SDRAM_TR0_SDLD_MASK 0x0000C000
#define SDRAM_TR0_SDLD_1_CLK 0x00000000
#define SDRAM_TR0_SDLD_2_CLK 0x00004000
#define SDRAM_TR0_SDRA_MASK 0x0000001C
#define SDRAM_TR0_SDRA_6_CLK 0x00000000
#define SDRAM_TR0_SDRA_7_CLK 0x00000004
#define SDRAM_TR0_SDRA_8_CLK 0x00000008
#define SDRAM_TR0_SDRA_9_CLK 0x0000000C
#define SDRAM_TR0_SDRA_10_CLK 0x00000010
#define SDRAM_TR0_SDRA_11_CLK 0x00000014
#define SDRAM_TR0_SDRA_12_CLK 0x00000018
#define SDRAM_TR0_SDRA_13_CLK 0x0000001C
#define SDRAM_TR0_SDRD_MASK 0x00000003
#define SDRAM_TR0_SDRD_2_CLK 0x00000001
#define SDRAM_TR0_SDRD_3_CLK 0x00000002
#define SDRAM_TR0_SDRD_4_CLK 0x00000003
/*-----------------------------------------------------------------------------+
| SDRAM TR1 Options
+-----------------------------------------------------------------------------*/
#define SDRAM_TR1_RDSS_MASK 0xC0000000
#define SDRAM_TR1_RDSS_TR0 0x00000000
#define SDRAM_TR1_RDSS_TR1 0x40000000
#define SDRAM_TR1_RDSS_TR2 0x80000000
#define SDRAM_TR1_RDSS_TR3 0xC0000000
#define SDRAM_TR1_RDSL_MASK 0x00C00000
#define SDRAM_TR1_RDSL_STAGE1 0x00000000
#define SDRAM_TR1_RDSL_STAGE2 0x00400000
#define SDRAM_TR1_RDSL_STAGE3 0x00800000
#define SDRAM_TR1_RDCD_MASK 0x00000800
#define SDRAM_TR1_RDCD_RCD_0_0 0x00000000
#define SDRAM_TR1_RDCD_RCD_1_2 0x00000800
#define SDRAM_TR1_RDCT_MASK 0x000001FF
#define SDRAM_TR1_RDCT_ENCODE(x) (((x) << 0) & SDRAM_TR1_RDCT_MASK)
#define SDRAM_TR1_RDCT_DECODE(x) (((x) & SDRAM_TR1_RDCT_MASK) >> 0)
#define SDRAM_TR1_RDCT_MIN 0x00000000
#define SDRAM_TR1_RDCT_MAX 0x000001FF
/*-----------------------------------------------------------------------------+
| SDRAM WDDCTR Options
+-----------------------------------------------------------------------------*/
#define SDRAM_WDDCTR_WRCP_MASK 0xC0000000
#define SDRAM_WDDCTR_WRCP_0DEG 0x00000000
#define SDRAM_WDDCTR_WRCP_90DEG 0x40000000
#define SDRAM_WDDCTR_WRCP_180DEG 0x80000000
#define SDRAM_WDDCTR_DCD_MASK 0x000001FF
/*-----------------------------------------------------------------------------+
| SDRAM CLKTR Options
+-----------------------------------------------------------------------------*/
#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
#define SDRAM_CLKTR_CLKP_0DEG 0x00000000
#define SDRAM_CLKTR_CLKP_90DEG 0x40000000
#define SDRAM_CLKTR_CLKP_180DEG 0x80000000
#define SDRAM_CLKTR_DCDT_MASK 0x000001FF
/*-----------------------------------------------------------------------------+
| SDRAM DLYCAL Options
+-----------------------------------------------------------------------------*/
#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
/*-----------------------------------------------------------------------------+
| General Definition
+-----------------------------------------------------------------------------*/
@ -296,10 +147,6 @@ static void program_tr0(unsigned long *dimm_populated,
unsigned long num_dimm_banks);
static void program_tr1(void);
#ifdef CONFIG_DDR_ECC
static void program_ecc(unsigned long num_bytes);
#endif
static unsigned long program_bxcr(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks);
@ -418,7 +265,7 @@ long int spd_sdram(void) {
/*
* If ecc is enabled, initialize the parity bits.
*/
program_ecc(total_size);
ecc_init(CFG_SDRAM_BASE, total_size);
#endif
return total_size;
@ -1402,45 +1249,4 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
return(bank_base_addr);
}
#ifdef CONFIG_DDR_ECC
static void program_ecc(unsigned long num_bytes)
{
unsigned long bank_base_addr;
unsigned long current_address;
unsigned long end_address;
unsigned long address_increment;
unsigned long cfg0;
/*
* get Memory Controller Options 0 data
*/
mfsdram(mem_cfg0, cfg0);
/*
* reset the bank_base address
*/
bank_base_addr = CFG_SDRAM_BASE;
if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) {
mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_GEN);
if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32)
address_increment = 4;
else
address_increment = 8;
current_address = (unsigned long)(bank_base_addr);
end_address = (unsigned long)(bank_base_addr) + num_bytes;
while (current_address < end_address) {
*((unsigned long*)current_address) = 0x00000000;
current_address += address_increment;
}
mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
SDRAM_CFG0_MCHK_CHK);
}
}
#endif /* CONFIG_DDR_ECC */
#endif /* CONFIG_SPD_EEPROM */

131
cpu/ppc4xx/44x_spd_ddr2.c
View File

@ -3,9 +3,12 @@
* This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
* DDR2 controller (non Denali Core). Those currently are:
*
* 405: 405EX
* 405: 405EX(r)
* 440/460: 440SP/440SPe/460EX/460GT
*
* Copyright (c) 2008 Nuovation System Designs, LLC
* Grant Erickson <gerickson@nuovations.com>
* (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
@ -45,6 +48,8 @@
#include <asm/mmu.h>
#include <asm/cache.h>
#include "ecc.h"
#if defined(CONFIG_SPD_EEPROM) && \
(defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT))
@ -3064,9 +3069,127 @@ static void ppc440sp_sdram_register_dump(void)
dcr_data = mfdcr(SDRAM_R3BAS);
printf(" MQ3_B0BAS = 0x%08X\n", dcr_data);
}
#else
#else /* !defined(DEBUG) */
static void ppc440sp_sdram_register_dump(void)
{
}
#endif
#endif /* CONFIG_SPD_EEPROM */
#endif /* defined(DEBUG) */
#elif defined(CONFIG_405EX)
/*-----------------------------------------------------------------------------
* Function: initdram
* Description: Configures the PPC405EX(r) DDR1/DDR2 SDRAM memory
* banks. The configuration is performed using static, compile-
* time parameters.
*---------------------------------------------------------------------------*/
long initdram(int board_type)
{
/*
* Only run this SDRAM init code once. For NAND booting
* targets like Kilauea, we call initdram() early from the
* 4k NAND booting image (CONFIG_NAND_SPL) from nand_boot().
* Later on the NAND U-Boot image runs (CONFIG_NAND_U_BOOT)
* which calls initdram() again. This time the controller
* mustn't be reconfigured again since we're already running
* from SDRAM.
*/
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
unsigned long val;
/* Set Memory Bank Configuration Registers */
mtsdram(SDRAM_MB0CF, CFG_SDRAM0_MB0CF);
mtsdram(SDRAM_MB1CF, CFG_SDRAM0_MB1CF);
mtsdram(SDRAM_MB2CF, CFG_SDRAM0_MB2CF);
mtsdram(SDRAM_MB3CF, CFG_SDRAM0_MB3CF);
/* Set Memory Clock Timing Register */
mtsdram(SDRAM_CLKTR, CFG_SDRAM0_CLKTR);
/* Set Refresh Time Register */
mtsdram(SDRAM_RTR, CFG_SDRAM0_RTR);
/* Set SDRAM Timing Registers */
mtsdram(SDRAM_SDTR1, CFG_SDRAM0_SDTR1);
mtsdram(SDRAM_SDTR2, CFG_SDRAM0_SDTR2);
mtsdram(SDRAM_SDTR3, CFG_SDRAM0_SDTR3);
/* Set Mode and Extended Mode Registers */
mtsdram(SDRAM_MMODE, CFG_SDRAM0_MMODE);
mtsdram(SDRAM_MEMODE, CFG_SDRAM0_MEMODE);
/* Set Memory Controller Options 1 Register */
mtsdram(SDRAM_MCOPT1, CFG_SDRAM0_MCOPT1);
/* Set Manual Initialization Control Registers */
mtsdram(SDRAM_INITPLR0, CFG_SDRAM0_INITPLR0);
mtsdram(SDRAM_INITPLR1, CFG_SDRAM0_INITPLR1);
mtsdram(SDRAM_INITPLR2, CFG_SDRAM0_INITPLR2);
mtsdram(SDRAM_INITPLR3, CFG_SDRAM0_INITPLR3);
mtsdram(SDRAM_INITPLR4, CFG_SDRAM0_INITPLR4);
mtsdram(SDRAM_INITPLR5, CFG_SDRAM0_INITPLR5);
mtsdram(SDRAM_INITPLR6, CFG_SDRAM0_INITPLR6);
mtsdram(SDRAM_INITPLR7, CFG_SDRAM0_INITPLR7);
mtsdram(SDRAM_INITPLR8, CFG_SDRAM0_INITPLR8);
mtsdram(SDRAM_INITPLR9, CFG_SDRAM0_INITPLR9);
mtsdram(SDRAM_INITPLR10, CFG_SDRAM0_INITPLR10);
mtsdram(SDRAM_INITPLR11, CFG_SDRAM0_INITPLR11);
mtsdram(SDRAM_INITPLR12, CFG_SDRAM0_INITPLR12);
mtsdram(SDRAM_INITPLR13, CFG_SDRAM0_INITPLR13);
mtsdram(SDRAM_INITPLR14, CFG_SDRAM0_INITPLR14);
mtsdram(SDRAM_INITPLR15, CFG_SDRAM0_INITPLR15);
/* Set On-Die Termination Registers */
mtsdram(SDRAM_CODT, CFG_SDRAM0_CODT);
mtsdram(SDRAM_MODT0, CFG_SDRAM0_MODT0);
mtsdram(SDRAM_MODT1, CFG_SDRAM0_MODT1);
/* Set Write Timing Register */
mtsdram(SDRAM_WRDTR, CFG_SDRAM0_WRDTR);
/*
* Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and
* SDRAM0_MCOPT2[IPTR] = 1
*/
mtsdram(SDRAM_MCOPT2, (SDRAM_MCOPT2_SREN_EXIT |
SDRAM_MCOPT2_IPTR_EXECUTE));
/*
* Poll SDRAM0_MCSTAT[MIC] for assertion to indicate the
* completion of initialization.
*/
do {
mfsdram(SDRAM_MCSTAT, val);
} while ((val & SDRAM_MCSTAT_MIC_MASK) != SDRAM_MCSTAT_MIC_COMP);
/* Set Delay Control Registers */
mtsdram(SDRAM_DLCR, CFG_SDRAM0_DLCR);
mtsdram(SDRAM_RDCC, CFG_SDRAM0_RDCC);
mtsdram(SDRAM_RQDC, CFG_SDRAM0_RQDC);
mtsdram(SDRAM_RFDC, CFG_SDRAM0_RFDC);
/*
* Enable Controller by SDRAM0_MCOPT2[DCEN] = 1:
*/
mfsdram(SDRAM_MCOPT2, val);
mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE);
#if defined(CONFIG_DDR_ECC)
ecc_init(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20);
#endif /* defined(CONFIG_DDR_ECC) */
#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
return (CFG_MBYTES_SDRAM << 20);
}
#endif /* defined(CONFIG_SPD_EEPROM) && defined(CONFIG_440SP) || ... */

10
cpu/ppc4xx/4xx_uart.c
View File

@ -98,14 +98,14 @@ DECLARE_GLOBAL_DATA_PTR;
#define UDIV_SUBTRACT 0
#define UART0_SDR sdr_uart0
#define UART1_SDR sdr_uart1
#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPe) || \
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define UART2_SDR sdr_uart2
#endif
#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define UART3_SDR sdr_uart3
#endif

1
cpu/ppc4xx/Makefile
View File

@ -45,6 +45,7 @@ COBJS += cpu.o
COBJS += cpu_init.o
COBJS += denali_data_eye.o
COBJS += denali_spd_ddr2.o
COBJS += ecc.o
COBJS += fdt.o
COBJS += gpio.o
COBJS += i2c.o

85
cpu/ppc4xx/cpu_init.c
View File

@ -32,73 +32,6 @@
DECLARE_GLOBAL_DATA_PTR;
#endif
#ifdef CFG_INIT_DCACHE_CS
# if (CFG_INIT_DCACHE_CS == 0)
# define PBxAP pb0ap
# define PBxCR pb0cr
# if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
# define PBxAP_VAL CFG_EBC_PB0AP
# define PBxCR_VAL CFG_EBC_PB0CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 1)
# define PBxAP pb1ap
# define PBxCR pb1cr
# if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR))
# define PBxAP_VAL CFG_EBC_PB1AP
# define PBxCR_VAL CFG_EBC_PB1CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 2)
# define PBxAP pb2ap
# define PBxCR pb2cr
# if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR))
# define PBxAP_VAL CFG_EBC_PB2AP
# define PBxCR_VAL CFG_EBC_PB2CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 3)
# define PBxAP pb3ap
# define PBxCR pb3cr
# if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR))
# define PBxAP_VAL CFG_EBC_PB3AP
# define PBxCR_VAL CFG_EBC_PB3CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 4)
# define PBxAP pb4ap
# define PBxCR pb4cr
# if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR))
# define PBxAP_VAL CFG_EBC_PB4AP
# define PBxCR_VAL CFG_EBC_PB4CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 5)
# define PBxAP pb5ap
# define PBxCR pb5cr
# if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR))
# define PBxAP_VAL CFG_EBC_PB5AP
# define PBxCR_VAL CFG_EBC_PB5CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 6)
# define PBxAP pb6ap
# define PBxCR pb6cr
# if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR))
# define PBxAP_VAL CFG_EBC_PB6AP
# define PBxCR_VAL CFG_EBC_PB6CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 7)
# define PBxAP pb7ap
# define PBxCR pb7cr
# if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR))
# define PBxAP_VAL CFG_EBC_PB7AP
# define PBxCR_VAL CFG_EBC_PB7CR
# endif
# endif
#endif /* CFG_INIT_DCACHE_CS */
#ifndef CFG_PLL_RECONFIG
#define CFG_PLL_RECONFIG 0
#endif
@ -353,24 +286,6 @@ int cpu_init_r (void)
uint pvr = get_pvr();
#endif
#ifdef CFG_INIT_DCACHE_CS
/*
* Flush and invalidate dcache, then disable CS for temporary stack.
* Afterwards, this CS can be used for other purposes
*/
dcache_disable(); /* flush and invalidate dcache */
mtebc(PBxAP, 0);
mtebc(PBxCR, 0); /* disable CS for temporary stack */
#if (defined(PBxAP_VAL) && defined(PBxCR_VAL))
/*
* Write new value into CS register
*/
mtebc(PBxAP, PBxAP_VAL);
mtebc(PBxCR, PBxCR_VAL);
#endif
#endif /* CFG_INIT_DCACHE_CS */
/*
* Write Ethernetaddress into on-chip register
*/

122
cpu/ppc4xx/ecc.c Normal file
View File

@ -0,0 +1,122 @@
/*
* Copyright (c) 2008 Nuovation System Designs, LLC
* Grant Erickson <gerickson@nuovations.com>
*
* (C) Copyright 2005-2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2002
* Jun Gu, Artesyn Technology, jung@artesyncp.com
*
* (C) Copyright 2001
* Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will abe useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* Description:
* This file implements generic DRAM ECC initialization for
* PowerPC processors using a SDRAM DDR/DDR2 controller,
* including the 405EX(r), 440GP/GX/EP/GR, 440SP(E), and
* 460EX/GT.
*/
#include <common.h>
#include <ppc4xx.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/processor.h>
#include <asm/io.h>
#include "ecc.h"
#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \
defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
#if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC)
/*
* void ecc_init()
*
* Description:
* This routine initializes a range of DRAM ECC memory with known
* data and enables ECC checking.
*
* TO DO:
* - Improve performance by utilizing cache.
* - Further generalize to make usable by other 4xx variants (e.g.
* 440EPx, et al).
*
* Input(s):
* start - A pointer to the start of memory covered by ECC requiring
* initialization.
* size - The size, in bytes, of the memory covered by ECC requiring
* initialization.
*
* Output(s):
* start - A pointer to the start of memory covered by ECC with
* CFG_ECC_PATTERN written to all locations and ECC data
* primed.
*
* Returns:
* N/A
*/
void ecc_init(unsigned long * const start, unsigned long size)
{
const unsigned long pattern = CFG_ECC_PATTERN;
unsigned long * const end = (unsigned long * const)((long)start + size);
unsigned long * current = start;
unsigned long mcopt1;
long increment;
if (start >= end)
return;
mfsdram(SDRAM_ECC_CFG, mcopt1);
/* Enable ECC generation without checking or reporting */
mtsdram(SDRAM_ECC_CFG, ((mcopt1 & ~SDRAM_ECC_CFG_MCHK_MASK) |
SDRAM_ECC_CFG_MCHK_GEN));
increment = sizeof(u32);
#if defined(CONFIG_440)
/*
* Look at the geometry of SDRAM (data width) to determine whether we
* can skip words when writing.
*/
if ((mcopt1 & SDRAM_ECC_CFG_DMWD_MASK) != SDRAM_ECC_CFG_DMWD_32)
increment = sizeof(u64);
#endif /* defined(CONFIG_440) */
while (current < end) {
*current = pattern;
current = (unsigned long *)((long)current + increment);
}
/* Wait until the writes are finished. */
sync();
/* Enable ECC generation with checking and no reporting */
mtsdram(SDRAM_ECC_CFG, ((mcopt1 & ~SDRAM_ECC_CFG_MCHK_MASK) |
SDRAM_ECC_CFG_MCHK_CHK));
}
#endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */
#endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */

69
cpu/ppc4xx/ecc.h Normal file
View File

@ -0,0 +1,69 @@
/*
* Copyright (c) 2008 Nuovation System Designs, LLC
* Grant Erickson <gerickson@nuovations.com>
*
* Copyright (c) 2007 DENX Software Engineering, GmbH
* Stefan Roese <sr@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will abe useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* Description:
* This file implements ECC initialization for PowerPC processors
* using the SDRAM DDR2 controller, including the 405EX(r),
* 440SP(E), 460EX and 460GT.
*
*/
#ifndef _ECC_H_
#define _ECC_H_
#if !defined(CFG_ECC_PATTERN)
#define CFG_ECC_PATTERN 0x00000000
#endif /* !defined(CFG_ECC_PATTERN) */
/*
* Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
* compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
* we need to make some processor dependant defines used later on by the
* driver.
*/
/* For 440GP/GX/EP/GR */
#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
#define SDRAM_ECC_CFG SDRAM_CFG0
#define SDRAM_ECC_CFG_MCHK_MASK SDRAM_CFG0_MCHK_MASK
#define SDRAM_ECC_CFG_MCHK_GEN SDRAM_CFG0_MCHK_GEN
#define SDRAM_ECC_CFG_MCHK_CHK SDRAM_CFG0_MCHK_CHK
#define SDRAM_ECC_CFG_DMWD_MASK SDRAM_CFG0_DMWD_MASK
#define SDRAM_ECC_CFG_DMWD_32 SDRAM_CFG0_DMWD_32
#endif
/* For 405EX/440SP/SPe/460EX/GT */
#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
#define SDRAM_ECC_CFG SDRAM_MCOPT1
#define SDRAM_ECC_CFG_MCHK_MASK SDRAM_MCOPT1_MCHK_MASK
#define SDRAM_ECC_CFG_MCHK_GEN SDRAM_MCOPT1_MCHK_GEN
#define SDRAM_ECC_CFG_MCHK_CHK SDRAM_MCOPT1_MCHK_CHK
#define SDRAM_ECC_CFG_DMWD_MASK SDRAM_MCOPT1_DMWD_MASK
#define SDRAM_ECC_CFG_DMWD_32 SDRAM_MCOPT1_DMWD_32
#endif
extern void ecc_init(unsigned long * const start, unsigned long size);
#endif /* _ECC_H_ */

54
cpu/ppc4xx/sdram.c
View File

@ -31,6 +31,7 @@
#include <ppc4xx.h>
#include <asm/processor.h>
#include "sdram.h"
#include "ecc.h"
#ifdef CONFIG_SDRAM_BANK0
@ -163,7 +164,7 @@ static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
/*
* Autodetect onboard SDRAM on 405 platforms
*/
void sdram_init(void)
long int initdram(int board_type)
{
ulong speed;
ulong sdtr1;
@ -231,9 +232,15 @@ void sdram_init(void)
mtsdram(mem_mcopt1, 0);
}
#endif
return;
/*
* OK, size detected -> all done
*/
return mb0cf[i].size;
}
}
return 0;
}
#else /* CONFIG_440 */
@ -332,49 +339,6 @@ static void sdram_tr1_set(int ram_address, int* tr1_value)
*tr1_value = (first_good + last_bad) / 2;
}
#ifdef CONFIG_SDRAM_ECC
static void ecc_init(ulong start, ulong size)
{
ulong current_addr; /* current byte address */
ulong end_addr; /* end of memory region */
ulong addr_inc; /* address skip between writes */
ulong cfg0_reg; /* for restoring ECC state */
/*
* TODO: Enable dcache before running this test (speedup)
*/
mfsdram(mem_cfg0, cfg0_reg);
mtsdram(mem_cfg0, (cfg0_reg & ~SDRAM_CFG0_MEMCHK) | SDRAM_CFG0_MEMCHK_GEN);
/*
* look at geometry of SDRAM (data width) to determine whether we
* can skip words when writing
*/
if ((cfg0_reg & SDRAM_CFG0_DRAMWDTH) == SDRAM_CFG0_DRAMWDTH_32)
addr_inc = 4;
else
addr_inc = 8;
current_addr = start;
end_addr = start + size;
while (current_addr < end_addr) {
*((ulong *)current_addr) = 0x00000000;
current_addr += addr_inc;
}
/*
* TODO: Flush dcache and disable it again
*/
/*
* Enable ecc checking and parity errors
*/
mtsdram(mem_cfg0, (cfg0_reg & ~SDRAM_CFG0_MEMCHK) | SDRAM_CFG0_MEMCHK_CHK);
}
#endif
/*
* Autodetect onboard DDR SDRAM on 440 platforms
*

522
cpu/ppc4xx/start.S
View File

@ -3,6 +3,8 @@
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
* Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
* Copyright (C) 2007 Stefan Roese <sr@denx.de>, DENX Software Engineering
* Copyright (c) 2008 Nuovation System Designs, LLC
* Grant Erickson <gerickson@nuovations.com>
*
* See file CREDITS for list of people who contributed to this
* project.
@ -79,34 +81,100 @@
# if (CFG_INIT_DCACHE_CS == 0)
# define PBxAP pb0ap
# define PBxCR pb0cr
# if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
# define PBxAP_VAL CFG_EBC_PB0AP
# define PBxCR_VAL CFG_EBC_PB0CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 1)
# define PBxAP pb1ap
# define PBxCR pb1cr
# if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR))
# define PBxAP_VAL CFG_EBC_PB1AP
# define PBxCR_VAL CFG_EBC_PB1CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 2)
# define PBxAP pb2ap
# define PBxCR pb2cr
# if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR))
# define PBxAP_VAL CFG_EBC_PB2AP
# define PBxCR_VAL CFG_EBC_PB2CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 3)
# define PBxAP pb3ap
# define PBxCR pb3cr
# if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR))
# define PBxAP_VAL CFG_EBC_PB3AP
# define PBxCR_VAL CFG_EBC_PB3CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 4)
# define PBxAP pb4ap
# define PBxCR pb4cr
# if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR))
# define PBxAP_VAL CFG_EBC_PB4AP
# define PBxCR_VAL CFG_EBC_PB4CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 5)
# define PBxAP pb5ap
# define PBxCR pb5cr
# if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR))
# define PBxAP_VAL CFG_EBC_PB5AP
# define PBxCR_VAL CFG_EBC_PB5CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 6)
# define PBxAP pb6ap
# define PBxCR pb6cr
# if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR))
# define PBxAP_VAL CFG_EBC_PB6AP
# define PBxCR_VAL CFG_EBC_PB6CR
# endif
# endif
# if (CFG_INIT_DCACHE_CS == 7)
# define PBxAP pb7ap
# define PBxCR pb7cr
# if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR))
# define PBxAP_VAL CFG_EBC_PB7AP
# define PBxCR_VAL CFG_EBC_PB7CR
# endif
# endif
# ifndef PBxAP_VAL
# define PBxAP_VAL 0
# endif
# ifndef PBxCR_VAL
# define PBxCR_VAL 0
# endif
/*
* Memory Bank x (nothingness) initialization CFG_INIT_RAM_ADDR + 64 MiB
* used as temporary stack pointer for the primordial stack
*/
# ifndef CFG_INIT_DCACHE_PBxAR
# define CFG_INIT_DCACHE_PBxAR (EBC_BXAP_BME_DISABLED | \
EBC_BXAP_TWT_ENCODE(7) | \
EBC_BXAP_BCE_DISABLE | \
EBC_BXAP_BCT_2TRANS | \
EBC_BXAP_CSN_ENCODE(0) | \
EBC_BXAP_OEN_ENCODE(0) | \
EBC_BXAP_WBN_ENCODE(0) | \
EBC_BXAP_WBF_ENCODE(0) | \
EBC_BXAP_TH_ENCODE(2) | \
EBC_BXAP_RE_DISABLED | \
EBC_BXAP_SOR_NONDELAYED | \
EBC_BXAP_BEM_WRITEONLY | \
EBC_BXAP_PEN_DISABLED)
# endif /* CFG_INIT_DCACHE_PBxAR */
# ifndef CFG_INIT_DCACHE_PBxCR
# define CFG_INIT_DCACHE_PBxCR (EBC_BXCR_BAS_ENCODE(CFG_INIT_RAM_ADDR) | \
EBC_BXCR_BS_64MB | \
EBC_BXCR_BU_RW | \
EBC_BXCR_BW_16BIT)
# endif /* CFG_INIT_DCACHE_PBxCR */
# ifndef CFG_INIT_RAM_PATTERN
# define CFG_INIT_RAM_PATTERN 0xDEADDEAD
# endif
#endif /* CFG_INIT_DCACHE_CS */
@ -114,6 +182,27 @@
#error Only 4k of init-ram is supported - please adjust CFG_INIT_RAM_END!
#endif
/*
* Unless otherwise overriden, enable two 128MB cachable instruction regions
* at CFG_SDRAM_BASE and another 128MB cacheable instruction region covering
* NOR flash at CFG_FLASH_BASE. Disable all cacheable data regions.
*/
#if !defined(CFG_FLASH_BASE)
/* If not already defined, set it to the "last" 128MByte region */
# define CFG_FLASH_BASE 0xf8000000
#endif
#if !defined(CFG_ICACHE_SACR_VALUE)
# define CFG_ICACHE_SACR_VALUE \
(PPC_128MB_SACR_VALUE(CFG_SDRAM_BASE + ( 0 << 20)) | \
PPC_128MB_SACR_VALUE(CFG_SDRAM_BASE + (128 << 20)) | \
PPC_128MB_SACR_VALUE(CFG_FLASH_BASE))
#endif /* !defined(CFG_ICACHE_SACR_VALUE) */
#if !defined(CFG_DCACHE_SACR_VALUE)
# define CFG_DCACHE_SACR_VALUE \
(0x00000000)
#endif /* !defined(CFG_DCACHE_SACR_VALUE) */
#define function_prolog(func_name) .text; \
.align 2; \
.globl func_name; \
@ -128,7 +217,6 @@
.extern ext_bus_cntlr_init
.extern sdram_init
#ifdef CONFIG_NAND_U_BOOT
.extern reconfig_tlb0
#endif
@ -401,97 +489,6 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/
/* Continue from 'normal' start */
/*----------------------------------------------------------------*/
2:
#if defined(CONFIG_NAND_SPL)
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
/*
* Enable internal SRAM (only on 440EPx/GRx, 440EP/GR have no OCM)
*/
lis r2,0x7fff
ori r2,r2,0xffff
mfdcr r1,isram0_dpc
and r1,r1,r2 /* Disable parity check */
mtdcr isram0_dpc,r1
mfdcr r1,isram0_pmeg
and r1,r1,r2 /* Disable pwr mgmt */
mtdcr isram0_pmeg,r1
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
lis r1,0x4000 /* BAS = 8000_0000 */
ori r1,r1,0x4580 /* 16k */
mtdcr isram0_sb0cr,r1
#endif
#endif
#if defined(CONFIG_440EP)
/*
* On 440EP with no internal SRAM, we setup SDRAM very early
* and copy the NAND_SPL to SDRAM and jump to it
*/
/* Clear Dcache to use as RAM */
addis r3,r0,CFG_INIT_RAM_ADDR@h
ori r3,r3,CFG_INIT_RAM_ADDR@l
addis r4,r0,CFG_INIT_RAM_END@h
ori r4,r4,CFG_INIT_RAM_END@l
rlwinm. r5,r4,0,27,31
rlwinm r5,r4,27,5,31
beq ..d_ran3
addi r5,r5,0x0001
..d_ran3:
mtctr r5
..d_ag3:
dcbz r0,r3
addi r3,r3,32
bdnz ..d_ag3
/*----------------------------------------------------------------*/
/* Setup the stack in internal SRAM */
/*----------------------------------------------------------------*/
lis r1,CFG_INIT_RAM_ADDR@h
ori r1,r1,CFG_INIT_SP_OFFSET@l
li r0,0
stwu r0,-4(r1)
stwu r0,-4(r1) /* Terminate call chain */
stwu r1,-8(r1) /* Save back chain and move SP */
lis r0,RESET_VECTOR@h /* Address of reset vector */
ori r0,r0, RESET_VECTOR@l
stwu r1,-8(r1) /* Save back chain and move SP */
stw r0,+12(r1) /* Save return addr (underflow vect) */
sync
bl early_sdram_init
sync
#endif /* CONFIG_440EP */
/*
* Copy SPL from cache into internal SRAM
*/
li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
mtctr r4
lis r2,CFG_NAND_BOOT_SPL_SRC@h
ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l
lis r3,CFG_NAND_BOOT_SPL_DST@h
ori r3,r3,CFG_NAND_BOOT_SPL_DST@l
spl_loop:
lwzu r4,4(r2)
stwu r4,4(r3)
bdnz spl_loop
/*
* Jump to code in RAM
*/
bl 00f
00: mflr r10
lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
sub r10,r10,r3
addi r10,r10,28
mtlr r10
blr
start_ram:
sync
isync
#endif /* CONFIG_NAND_SPL */
bl 3f
b _start
@ -746,7 +743,7 @@ _start:
stw r0,+12(r1) /* Save return addr (underflow vect) */
#ifdef CONFIG_NAND_SPL
bl nand_boot /* will not return */
bl nand_boot_common /* will not return */
#else
GET_GOT
@ -840,16 +837,16 @@ _start:
/* make sure above stores all comlete before going on */
sync
/*----------------------------------------------------------------------- */
/* Enable two 128MB cachable regions. */
/*----------------------------------------------------------------------- */
addis r1,r0,0xc000
addi r1,r1,0x0001
mticcr r1 /* instruction cache */
/* Set-up icache cacheability. */
lis r1, CFG_ICACHE_SACR_VALUE@h
ori r1, r1, CFG_ICACHE_SACR_VALUE@l
mticcr r1
isync
addis r1,r0,0x0000
addi r1,r1,0x0000
mtdccr r1 /* data cache */
/* Set-up dcache cacheability. */
lis r1, CFG_DCACHE_SACR_VALUE@h
ori r1, r1, CFG_DCACHE_SACR_VALUE@l
mtdccr r1
addis r1,r0,CFG_INIT_RAM_ADDR@h
ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack to SDRAM */
@ -892,39 +889,33 @@ _start:
/* dbsr is cleared by setting bits to 1) */
mtdbsr r4 /* clear/reset the dbsr */
/*----------------------------------------------------------------------- */
/* Invalidate I and D caches. Enable I cache for defined memory regions */
/* to speed things up. Leave the D cache disabled for now. It will be */
/* enabled/left disabled later based on user selected menu options. */
/* Be aware that the I cache may be disabled later based on the menu */
/* options as well. See miscLib/main.c. */
/*----------------------------------------------------------------------- */
/* Invalidate the i- and d-caches. */
bl invalidate_icache
bl invalidate_dcache
/*----------------------------------------------------------------------- */
/* Enable two 128MB cachable regions. */
/*----------------------------------------------------------------------- */
lis r4,0xc000
ori r4,r4,0x0001
mticcr r4 /* instruction cache */
/* Set-up icache cacheability. */
lis r4, CFG_ICACHE_SACR_VALUE@h
ori r4, r4, CFG_ICACHE_SACR_VALUE@l
mticcr r4
isync
lis r4,0x0000
ori r4,r4,0x0000
mtdccr r4 /* data cache */
/* Set-up dcache cacheability. */
lis r4, CFG_DCACHE_SACR_VALUE@h
ori r4, r4, CFG_DCACHE_SACR_VALUE@l
mtdccr r4
#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) || defined(CONFIG_405EX)
#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
/*----------------------------------------------------------------------- */
/* Tune the speed and size for flash CS0 */
/*----------------------------------------------------------------------- */
bl ext_bus_cntlr_init
#endif
#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM))
/*
* Boards like the Kilauea (405EX) don't have OCM and can't use
* DCache for init-ram. So setup stack here directly after the
* SDRAM is initialized.
* For boards that don't have OCM and can't use the data cache
* for their primordial stack, setup stack here directly after the
* SDRAM is initialized in ext_bus_cntlr_init.
*/
lis r1, CFG_INIT_RAM_ADDR@h
ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */
@ -1007,83 +998,90 @@ _start:
#endif /* CONFIG_405EZ */
#endif
#ifdef CONFIG_NAND_SPL
/*
* Copy SPL from cache into internal SRAM
*/
li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
mtctr r4
lis r2,CFG_NAND_BOOT_SPL_SRC@h
ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l
lis r3,CFG_NAND_BOOT_SPL_DST@h
ori r3,r3,CFG_NAND_BOOT_SPL_DST@l
spl_loop:
lwzu r4,4(r2)
stwu r4,4(r3)
bdnz spl_loop
/*
* Jump to code in RAM
*/
bl 00f
00: mflr r10
lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
sub r10,r10,r3
addi r10,r10,28
mtlr r10
blr
start_ram:
sync
isync
#endif /* CONFIG_NAND_SPL */
/*----------------------------------------------------------------------- */
/* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
/*----------------------------------------------------------------------- */
#ifdef CFG_INIT_DCACHE_CS
/*----------------------------------------------------------------------- */
/* Memory Bank x (nothingness) initialization 1GB+64MEG */
/* used as temporary stack pointer for stage0 */
/*----------------------------------------------------------------------- */
li r4,PBxAP
mtdcr ebccfga,r4
lis r4,0x0380
ori r4,r4,0x0480
mtdcr ebccfgd,r4
li r4, PBxAP
mtdcr ebccfga, r4
lis r4, CFG_INIT_DCACHE_PBxAR@h
ori r4, r4, CFG_INIT_DCACHE_PBxAR@l
mtdcr ebccfgd, r4
addi r4,0,PBxCR
mtdcr ebccfga,r4
lis r4,0x400D
ori r4,r4,0xa000
mtdcr ebccfgd,r4
addi r4, 0, PBxCR
mtdcr ebccfga, r4
lis r4, CFG_INIT_DCACHE_PBxCR@h
ori r4, r4, CFG_INIT_DCACHE_PBxCR@l
mtdcr ebccfgd, r4
/* turn on data cache for this region */
lis r4,0x0080
/*
* Enable the data cache for the 128MB storage access control region
* at CFG_INIT_RAM_ADDR.
*/
mfdccr r4
oris r4, r4, PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@h
ori r4, r4, PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@l
mtdccr r4
/* set stack pointer and clear stack to known value */
/*
* Preallocate data cache lines to be used to avoid a subsequent
* cache miss and an ensuing machine check exception when exceptions
* are enabled.
*/
li r0, 0
lis r1,CFG_INIT_RAM_ADDR@h
ori r1,r1,CFG_INIT_SP_OFFSET@l
lis r3, CFG_INIT_RAM_ADDR@h
ori r3, r3, CFG_INIT_RAM_ADDR@l
li r4,2048 /* we store 2048 words to stack */
lis r4, CFG_INIT_RAM_END@h
ori r4, r4, CFG_INIT_RAM_END@l
/*
* Convert the size, in bytes, to the number of cache lines/blocks
* to preallocate.
*/
clrlwi. r5, r4, (32 - L1_CACHE_SHIFT)
srwi r5, r4, L1_CACHE_SHIFT
beq ..load_counter
addi r5, r5, 0x0001
..load_counter:
mtctr r5
/* Preallocate the computed number of cache blocks. */
..alloc_dcache_block:
dcba r0, r3
addi r3, r3, L1_CACHE_BYTES
bdnz ..alloc_dcache_block
sync
/*
* Load the initial stack pointer and data area and convert the size,
* in bytes, to the number of words to initialize to a known value.
*/
lis r1, CFG_INIT_RAM_ADDR@h
ori r1, r1, CFG_INIT_SP_OFFSET@l
lis r4, (CFG_INIT_RAM_END >> 2)@h
ori r4, r4, (CFG_INIT_RAM_END >> 2)@l
mtctr r4
lis r2,CFG_INIT_RAM_ADDR@h /* we also clear data area */
ori r2,r2,CFG_INIT_RAM_END@l /* so cant copy value from r1 */
lis r2, CFG_INIT_RAM_ADDR@h
ori r2, r2, CFG_INIT_RAM_END@l
lis r4,0xdead /* we store 0xdeaddead in the stack */
ori r4,r4,0xdead
lis r4, CFG_INIT_RAM_PATTERN@h
ori r4, r4, CFG_INIT_RAM_PATTERN@l
..stackloop:
stwu r4,-4(r2)
stwu r4, -4(r2)
bdnz ..stackloop
li r0, 0 /* Make room for stack frame header and */
stwu r0, -4(r1) /* clear final stack frame so that */
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
/*
* Make room for stack frame header and clear final stack frame so
* that stack backtraces terminate cleanly.
*/
stwu r0, -4(r1)
stwu r0, -4(r1)
/*
* Set up a dummy frame to store reset vector as return address.
* this causes stack underflow to reset board.
@ -1120,13 +1118,8 @@ start_ram:
stw r0, +12(r1) /* Save return addr (underflow vect) */
#endif /* CFG_INIT_DCACHE_CS */
/*----------------------------------------------------------------------- */
/* Initialize SDRAM Controller */
/*----------------------------------------------------------------------- */
bl sdram_init
#ifdef CONFIG_NAND_SPL
bl nand_boot /* will not return */
bl nand_boot_common /* will not return */
#else
GET_GOT /* initialize GOT access */
@ -1328,33 +1321,72 @@ in32r:
* This "function" does not return, instead it continues in RAM
* after relocating the monitor code.
*
* r3 = dest
* r4 = src
* r5 = length in bytes
* r6 = cachelinesize
* r3 = Relocated stack pointer
* r4 = Relocated global data pointer
* r5 = Relocated text pointer
*/
.globl relocate_code
relocate_code:
#ifdef CONFIG_4xx_DCACHE
#if defined(CONFIG_4xx_DCACHE) || defined(CFG_INIT_DCACHE_CS)
/*
* We need to flush the Init Data before the dcache will be
* invalidated
* We need to flush the initial global data (gd_t) before the dcache
* will be invalidated.
*/
/* save regs */
mr r9,r3
mr r10,r4
mr r11,r5
/* Save registers */
mr r9, r3
mr r10, r4
mr r11, r5
mr r3,r4
addi r4,r4,0x200 /* should be enough for init data */
/* Flush initial global data range */
mr r3, r4
addi r4, r4, CFG_GBL_DATA_SIZE@l
bl flush_dcache_range
/* restore regs */
mr r3,r9
mr r4,r10
mr r5,r11
#endif
#if defined(CFG_INIT_DCACHE_CS)
/*
* Undo the earlier data cache set-up for the primordial stack and
* data area. First, invalidate the data cache and then disable data
* cacheability for that area. Finally, restore the EBC values, if
* any.
*/
/* Invalidate the primordial stack and data area in cache */
lis r3, CFG_INIT_RAM_ADDR@h
ori r3, r3, CFG_INIT_RAM_ADDR@l
lis r4, CFG_INIT_RAM_END@h
ori r4, r4, CFG_INIT_RAM_END@l
add r4, r4, r3
bl invalidate_dcache_range
/* Disable cacheability for the region */
mfdccr r3
lis r4, ~PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@h
ori r4, r4, ~PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@l
and r3, r3, r4
mtdccr r3
/* Restore the EBC parameters */
li r3, PBxAP
mtdcr ebccfga, r3
lis r3, PBxAP_VAL@h
ori r3, r3, PBxAP_VAL@l
mtdcr ebccfgd, r3
li r3, PBxCR
mtdcr ebccfga, r3
lis r3, PBxCR_VAL@h
ori r3, r3, PBxCR_VAL@l
mtdcr ebccfgd, r3
#endif /* defined(CFG_INIT_DCACHE_CS) */
/* Restore registers */
mr r3, r9
mr r4, r10
mr r5, r11
#endif /* defined(CONFIG_4xx_DCACHE) || defined(CFG_INIT_DCACHE_CS) */
#ifdef CFG_INIT_RAM_DCACHE
/*
@ -1396,13 +1428,13 @@ relocate_code:
addi r1,r0,CFG_TLB_FOR_BOOT_FLASH /* Use defined TLB */
#else
addi r1,r0,0x0000 /* Default TLB entry is #0 */
#endif
#endif /* CFG_TLB_FOR_BOOT_FLASH */
tlbre r0,r1,0x0002 /* Read contents */
ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
tlbwe r0,r1,0x0002 /* Save it out */
sync
isync
#endif
#endif /* defined(CONFIG_440EP) || ... || defined(CONFIG_460GT) */
mr r1, r3 /* Set new stack pointer */
mr r9, r4 /* Save copy of Init Data pointer */
mr r10, r5 /* Save copy of Destination Address */
@ -1425,7 +1457,7 @@ relocate_code:
/* First our own GOT */
add r14, r14, r15
/* the the one used by the C code */
/* then the one used by the C code */
add r30, r30, r15
/*
@ -2024,3 +2056,75 @@ pll_wait:
blr
function_epilog(mftlb1)
#endif /* CONFIG_440 */
#if defined(CONFIG_NAND_SPL)
/*
* void nand_boot_relocate(dst, src, bytes)
*
* r3 = Destination address to copy code to (in SDRAM)
* r4 = Source address to copy code from
* r5 = size to copy in bytes
*/
nand_boot_relocate:
mr r6,r3
mr r7,r4
mflr r8
/*
* Copy SPL from icache into SDRAM
*/
subi r3,r3,4
subi r4,r4,4
srwi r5,r5,2
mtctr r5
..spl_loop:
lwzu r0,4(r4)
stwu r0,4(r3)
bdnz ..spl_loop
/*
* Calculate "corrected" link register, so that we "continue"
* in execution in destination range
*/
sub r3,r7,r6 /* r3 = src - dst */
sub r8,r8,r3 /* r8 = link-reg - (src - dst) */
mtlr r8
blr
nand_boot_common:
/*
* First initialize SDRAM. It has to be available *before* calling
* nand_boot().
*/
lis r3,CFG_SDRAM_BASE@h
ori r3,r3,CFG_SDRAM_BASE@l
bl initdram
/*
* Now copy the 4k SPL code into SDRAM and continue execution
* from there.
*/
lis r3,CFG_NAND_BOOT_SPL_DST@h
ori r3,r3,CFG_NAND_BOOT_SPL_DST@l
lis r4,CFG_NAND_BOOT_SPL_SRC@h
ori r4,r4,CFG_NAND_BOOT_SPL_SRC@l
lis r5,CFG_NAND_BOOT_SPL_SIZE@h
ori r5,r5,CFG_NAND_BOOT_SPL_SIZE@l
bl nand_boot_relocate
/*
* We're running from SDRAM now!!!
*
* It is necessary for 4xx systems to relocate from running at
* the original location (0xfffffxxx) to somewhere else (SDRAM
* preferably). This is because CS0 needs to be reconfigured for
* NAND access. And we can't reconfigure this CS when currently
* "running" from it.
*/
/*
* Finally call nand_boot() to load main NAND U-Boot image from
* NAND and jump to it.
*/
bl nand_boot /* will not return */
#endif /* CONFIG_NAND_SPL */

9
cpu/ppc4xx/traps.c
View File

@ -170,7 +170,7 @@ MachineCheckException(struct pt_regs *regs)
val = get_esr();
#if !defined(CONFIG_440)
#if !defined(CONFIG_440) && !defined(CONFIG_405EX)
if (val& ESR_IMCP) {
printf("Instruction");
mtspr(ESR, val & ~ESR_IMCP);
@ -179,7 +179,7 @@ MachineCheckException(struct pt_regs *regs)
}
printf(" machine check.\n");
#elif defined(CONFIG_440)
#elif defined(CONFIG_440) || defined(CONFIG_405EX)
if (val& ESR_IMCP){
printf("Instruction Synchronous Machine Check exception\n");
mtspr(SPRN_ESR, val & ~ESR_IMCP);
@ -187,10 +187,15 @@ MachineCheckException(struct pt_regs *regs)
val = mfspr(MCSR);
if (val & MCSR_IB)
printf("Instruction Read PLB Error\n");
#if defined(CONFIG_440)
if (val & MCSR_DRB)
printf("Data Read PLB Error\n");
if (val & MCSR_DWB)
printf("Data Write PLB Error\n");
#else
if (val & MCSR_DB)
printf("Data PLB Error\n");
#endif
if (val & MCSR_TLBP)
printf("TLB Parity Error\n");
if (val & MCSR_ICP){

1156
include/asm-ppc/ppc4xx-sdram.h Normal file
View File

File diff suppressed because it is too large Load Diff

6
include/asm-ppc/processor.h
View File

@ -460,17 +460,19 @@
#define SPRN_PID2 0x27a /* Process ID Register 2 */
#define SPRN_MCSR 0x23c /* Machine Check Syndrome register */
#define SPRN_MCAR 0x23d /* Machine Check Address register */
#ifdef CONFIG_440
#define MCSR_MCS 0x80000000 /* Machine Check Summary */
#define MCSR_IB 0x40000000 /* Instruction PLB Error */
#if defined(CONFIG_440)
#define MCSR_DRB 0x20000000 /* Data Read PLB Error */
#define MCSR_DWB 0x10000000 /* Data Write PLB Error */
#else
#define MCSR_DB 0x20000000 /* Data PLB Error */
#endif /* defined(CONFIG_440) */
#define MCSR_TLBP 0x08000000 /* TLB Parity Error */
#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */
#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */
#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */
#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */
#endif
#define ESR_ST 0x00800000 /* Store Operation */
#if defined(CONFIG_MPC86xx)

38
include/configs/CPCI4052.h
View File

@ -88,32 +88,17 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_ELF
#define CONFIG_CMD_DATE
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_BSP
#define CONFIG_CMD_EEPROM
#if 0 /* test-only */
#define CONFIG_NETCONSOLE
#define CONFIG_NET_MULTI
#ifdef CONFIG_NET_MULTI
#define CONFIG_PHY1_ADDR 1 /* PHY address: for NetConsole */
#endif
#endif
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
#if 0 /* test-only */
#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */
#endif
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
@ -256,29 +241,6 @@
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
/*
* JFFS2 partitions
*/
/* No command line, one static partition, use whole device */
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nor0"
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
/* mtdparts command line support */
/* Use first bank for JFFS2, second bank contains U-Boot.
*
* Note: fake mtd_id's used, no linux mtd map file.
*/
/*
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT "nor0=cpci4052-0"
#define MTDPARTS_DEFAULT "mtdparts=cpci4052-0:-(jffs2)"
*/
#if 0 /* Use NVRAM for environment variables */
/*-----------------------------------------------------------------------
* NVRAM organization

22
include/configs/CPCI405AB.h
View File

@ -88,7 +88,6 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_ELF
#define CONFIG_CMD_DATE
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
@ -238,27 +237,6 @@
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
/*
* JFFS2 partitions
*/
/* No command line, one static partition */
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nor0"
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
/* mtdparts command line support */
/* Use first bank for JFFS2, second bank contains U-Boot.
*
* Note: fake mtd_id's used, no linux mtd map file.
*/
/*
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT "nor0=cpci405ab-0"
#define MTDPARTS_DEFAULT "mtdparts=cpci405ab-0:-(jffs2)"
*/
/*-----------------------------------------------------------------------
* I2C EEPROM (CAT24WC32) for environment
*/

33
include/configs/CPCI405DT.h
View File

@ -87,23 +87,12 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_ELF
#define CONFIG_CMD_DATE
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_BSP
#define CONFIG_CMD_EEPROM
#if 0 /* test-only */
#define CONFIG_NETCONSOLE
#define CONFIG_NET_MULTI
#ifdef CONFIG_NET_MULTI
#define CONFIG_PHY1_ADDR 1 /* PHY address: for NetConsole */
#endif
#endif
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@ -260,27 +249,6 @@
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
/*
* JFFS2 partitions
*/
/* No command line, one static partition */
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nor0"
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
/* mtdparts command line support */
/* Use first bank for JFFS2, second bank contains U-Boot.
*
* Note: fake mtd_id's used, no linux mtd map file.
*/
/*
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT "nor0=cpci405dt-0"
#define MTDPARTS_DEFAULT "mtdparts=cpci405dt-0:-(jffs2)"
*/
#if 0 /* Use NVRAM for environment variables */
/*-----------------------------------------------------------------------
* NVRAM organization
@ -416,7 +384,6 @@
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
/*
* Internal Definitions
*

169
include/configs/acadia.h
View File

@ -34,6 +34,13 @@
#define CONFIG_ACADIA 1 /* Board is Acadia */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_405EZ 1 /* Specifc 405EZ support*/
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME acadia
#include "amcc-common.h"
/* Detect Acadia PLL input clock automatically via CPLD bit */
#define CONFIG_SYS_CLK_FREQ ((in8(CFG_CPLD_BASE + 0) == 0x0c) ? \
66666666 : 33333000)
@ -59,16 +66,11 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0xfe000000
#define CFG_CPLD_BASE 0x80000000
#define CFG_NAND_ADDR 0xd0000000
#define CFG_USB_HOST 0xef603000 /* USB OHCI 1.1 controller */
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_MONITOR_LEN (0xFFFFFFFF - CFG_MONITOR_BASE + 1)
#define CFG_MALLOC_LEN (512 * 1024)/* Reserve 512 kB for malloc() */
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer
*----------------------------------------------------------------------*/
@ -89,12 +91,6 @@
*----------------------------------------------------------------------*/
#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
#define CFG_BASE_BAUD 691200
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI 1
/* The following table includes the supported baudrates */
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
/*-----------------------------------------------------------------------
* Environment
@ -202,10 +198,7 @@
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
@ -222,77 +215,24 @@
#define CFG_DTT_LOW_TEMP -30
#define CFG_DTT_HYSTERESIS 3
#if 0 /* test-only... */
/*-----------------------------------------------------------------------
* SPI stuff - Define to include SPI control
*-----------------------------------------------------------------------
*/
#define CONFIG_SPI
#endif
/*-----------------------------------------------------------------------
* Ethernet
*----------------------------------------------------------------------*/
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_NET_MULTI 1
#define CFG_RX_ETH_BUFFER 16 /* # of rx buffers & descriptors*/
#define CONFIG_HAS_ETH0 1
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define xstr(s) str(s)
#define str(s) #s
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=acadia\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=acadia/uImage\0" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_PPC \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
CONFIG_AMCC_DEF_ENV_NAND_UPD \
"kernel_addr=fff10000\0" \
"ramdisk_addr=fff20000\0" \
"initrd_high=30000000\0" \
"load=tftp 200000 acadia/u-boot.bin\0" \
"update=protect off " xstr(CFG_MONITOR_BASE) " FFFFFFFF;" \
"era " xstr(CFG_MONITOR_BASE) " FFFFFFFF;" \
"cp.b ${fileaddr} " xstr(CFG_MONITOR_BASE) " ${filesize};" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
"nload=tftp 200000 acadia/u-boot-nand.bin\0" \
"nupdate=nand erase 0 60000;nand write 200000 0 60000;" \
"setenv filesize;saveenv\0" \
"nupd=run nload nupdate\0" \
"kozio=bootm ffc60000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
@ -305,35 +245,10 @@
#define CONFIG_SUPPORT_VFAT
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DTT
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_USB
/*
@ -344,43 +259,6 @@
#undef CONFIG_CMD_IMLS
#endif
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*-----------------------------------------------------------------------
* Miscellaneous configurable options
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* NAND FLASH
*----------------------------------------------------------------------*/
@ -493,21 +371,4 @@
#define CFG_GPIO1_TSRL 0x00000000
#define CFG_GPIO1_TSRH 0x00000000
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

1
include/configs/alpr.h
View File

@ -33,7 +33,6 @@
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
#define CONFIG_4xx_DCACHE /* Enable i- and d-cache */

259
include/configs/amcc-common.h Normal file
View File

@ -0,0 +1,259 @@
/*
* (C) Copyright 2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* Common configuration options for all AMCC boards
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __AMCC_COMMON_H
#define __AMCC_COMMON_H
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_MONITOR_BASE TEXT_BASE /* Start of U-Boot */
#define CFG_MONITOR_LEN (0xFFFFFFFF - CFG_MONITOR_BASE + 1)
#define CFG_MALLOC_LEN (1 << 20) /* Reserved for malloc */
/*
* UART
*/
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
/*
* I2C
*/
#define CONFIG_HARD_I2C /* I2C with hardware support */
#define CFG_I2C_SLAVE 0x7F
/*
* Ethernet/EMAC/PHY
*/
#define CONFIG_MII /* MII PHY management */
#define CONFIG_NET_MULTI
#define CONFIG_NETCONSOLE /* include NetConsole support */
#if defined(CONFIG_440)
#define CFG_RX_ETH_BUFFER 32 /* number of eth rx buffers */
#else
#define CFG_RX_ETH_BUFFER 16 /* number of eth rx buffers */
#endif
/*
* Commands
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#if defined(CONFIG_440)
#define CONFIG_CMD_CACHE
#endif
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_LOOPW /* enable loopw command */
#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE /* include version env variable */
#define CFG_CONSOLE_INFO_QUIET /* don't print console @ startup*/
#define CFG_HUSH_PARSER /* Use the HUSH parser */
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_SUBNETMASK
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Internal Definitions
*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
* Pass open firmware flat tree
*/
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
/*
* Booting and default environment
*/
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#define CONFIG_BOOTCOMMAND "run flash_self"
/*
* Only very few boards have default console not on ttyS0 (like Taishan)
*/
#if !defined(CONFIG_USE_TTY)
#define CONFIG_USE_TTY ttyS0
#endif
/*
* Only some 4xx PPC's are equipped with an FPU
*/
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
#else
#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
#endif
/*
* Only some boards need to extend the bootargs by some additional
* parameters (like Makalu)
*/
#if !defined(CONFIG_ADDMISC)
#define CONFIG_ADDMISC "addmisc=setenv bootargs ${bootargs}\0"
#endif
#define xstr(s) str(s)
#define str(s) #s
/*
* General common environment variables shared on all AMCC eval boards
*/
#define CONFIG_AMCC_DEF_ENV \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs}" \
" console=" xstr(CONFIG_USE_TTY) ",${baudrate}\0" \
CONFIG_ADDMISC \
"initrd_high=30000000\0" \
"kernel_addr_r=400000\0" \
"fdt_addr_r=800000\0" \
"hostname=" xstr(CONFIG_HOSTNAME) "\0" \
"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
CONFIG_AMCC_DEF_ENV_ROOTPATH
/*
* Default environment for arch/powerpc booting
* for boards that are ported to arch/powerpc
*/
#define CONFIG_AMCC_DEF_ENV_POWERPC \
"flash_self=run ramargs addip addtty addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
"flash_nfs=run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr} - ${fdt_addr}\0" \
"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
"tftp ${fdt_addr_r} ${fdt_file}; " \
"run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
"fdt_file=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0"
/*
* Default environment for arch/ppc booting,
* for boards that are not ported to arch/powerpc yet
*/
#define CONFIG_AMCC_DEF_ENV_PPC \
"flash_self=run ramargs addip addtty addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_nfs=run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr}\0" \
"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
"run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr_r}\0"
/*
* Default environment for arch/ppc booting (old version),
* for boards that are ported to arch/ppc and arch/powerpc
*/
#define CONFIG_AMCC_DEF_ENV_PPC_OLD \
"flash_self_old=run ramargs addip addtty addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_nfs_old=run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr}\0" \
"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
"run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr_r}\0"
#define CONFIG_AMCC_DEF_ENV_NOR_UPD \
"load=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"update=protect off " xstr(CFG_MONITOR_BASE) " FFFFFFFF;" \
"era " xstr(CFG_MONITOR_BASE) " FFFFFFFF;" \
"cp.b ${fileaddr} " xstr(CFG_MONITOR_BASE) " ${filesize};" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
#define CONFIG_AMCC_DEF_ENV_NAND_UPD \
"nload=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0" \
"nupdate=nand erase 0 100000;nand write 200000 0 100000;" \
"setenv filesize;saveenv\0" \
"nupd=run nload nupdate\0"
#endif /* __AMCC_COMMON_H */

171
include/configs/bamboo.h
View File

@ -36,6 +36,12 @@
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME bamboo
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
/*
@ -49,10 +55,6 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */
#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/
#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
@ -84,14 +86,9 @@
* Serial Port
*----------------------------------------------------------------------*/
#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI 1
/* define this if you want console on UART1 */
#undef CONFIG_UART1_CONSOLE
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
* NVRAM/RTC
*
@ -223,15 +220,11 @@
#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51}
#define CFG_MBYTES_SDRAM (64) /* 64MB fixed size for early-sdram-init */
#define CONFIG_PROG_SDRAM_TLB
#undef CFG_DRAM_TEST
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
@ -245,54 +238,20 @@
#define CFG_ENV_OFFSET 0x0
#endif /* CFG_ENV_IS_IN_EEPROM */
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=bamboo\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/bamboo/uImage\0" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_POWERPC \
CONFIG_AMCC_DEF_ENV_PPC_OLD \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
CONFIG_AMCC_DEF_ENV_NAND_UPD \
"kernel_addr=fff00000\0" \
"ramdisk_addr=fff10000\0" \
"initrd_high=30000000\0" \
"load=tftp 100000 /tftpboot/bamboo/u-boot.bin\0" \
"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \
"cp.b 100000 fffa0000 60000;" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_HAS_ETH0
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
#define CONFIG_PHY1_ADDR 1
@ -300,16 +259,6 @@
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#endif /* CONFIG_BAMBOO_NAND */
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI 1 /* required for netconsole */
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
#ifdef CONFIG_440EP
/* USB */
#define CONFIG_USB_OHCI
@ -319,77 +268,27 @@
#define USB_2_0_DEVICE
#endif /*CONFIG_440EP*/
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_ELF
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_USB
#ifdef CONFIG_BAMBOO_NAND
#define CONFIG_CMD_NAND
#endif
#define CONFIG_SUPPORT_VFAT
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_LYNXKDI 1 /* support kdi files */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*-----------------------------------------------------------------------
* PCI stuff
@ -408,28 +307,4 @@
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

150
include/configs/bubinga.h
View File

@ -37,6 +37,12 @@
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
#define CONFIG_BUBINGA 1 /* ...on a BUBINGA board */
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME bubinga
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
@ -80,117 +86,34 @@
#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
#endif
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=bubinga\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/bubinga/uImage\0" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_PPC \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
"kernel_addr=fff80000\0" \
"ramdisk_addr=fff90000\0" \
"initrd_high=30000000\0" \
"load=tftp 100000 /tftpboot/bubinga/u-boot.bin\0" \
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
"cp.b 100000 fffc0000 40000;" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
""
#define CONFIG_BOOTCOMMAND "run net_nfs"
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_PHY1_ADDR 2 /* EMAC1 PHY address */
#define CONFIG_NET_MULTI 1
#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Bubinga */
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
/*
* If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
* If CFG_405_UART_ERRATA_59, then UART divisor is 31.
@ -205,29 +128,11 @@
#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
#define CFG_BASE_BAUD 691200
/* The following table includes the supported baudrates */
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*-----------------------------------------------------------------------
* I2C stuff
*-----------------------------------------------------------------------
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES { 0x69 } /* avoid iprobe hangup (why?) */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */
@ -272,21 +177,9 @@
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_SRAM_BASE 0xFFF00000
#define CFG_FLASH_BASE 0xFFF80000
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
@ -423,21 +316,4 @@
#define FPGA_REG1_OFFB_FLASH 0x02 /* Off board flash */
#define FPGA_REG1_SRAM_BOOT 0x01 /* SRAM at 0xFFF80000 not Flash */
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

173
include/configs/canyonlands.h
View File

@ -30,12 +30,19 @@
/* This config file is used for Canyonlands (460EX) and Glacier (460GT) */
#ifndef CONFIG_CANYONLANDS
#define CONFIG_460GT 1 /* Specific PPC460GT */
#define CONFIG_HOSTNAME glacier
#else
#define CONFIG_460EX 1 /* Specific PPC460EX */
#define CONFIG_HOSTNAME canyonlands
#endif
#define CONFIG_440 1
#define CONFIG_4xx 1 /* ... PPC4xx family */
/*
* Include common defines/options for all AMCC eval boards
*/
#include "amcc-common.h"
#define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
@ -47,8 +54,6 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_PCI_MEMBASE 0x80000000 /* mapped PCI memory */
#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
#define CFG_PCI_TARGBASE CFG_PCI_MEMBASE
@ -86,10 +91,6 @@
#define CFG_AHB_BASE 0xE2000000 /* internal AHB peripherals */
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc()*/
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in OCM)
*----------------------------------------------------------------------*/
@ -102,13 +103,8 @@
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI 1
#undef CONFIG_UART1_CONSOLE /* define this if you want console on UART1 */
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
@ -242,10 +238,7 @@
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_SPEED 400000 /* I2C speed */
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
@ -270,7 +263,6 @@
* Ethernet
*----------------------------------------------------------------------*/
#define CONFIG_IBM_EMAC4_V4 1
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
#define CONFIG_PHY1_ADDR 1
#define CONFIG_HAS_ETH0
@ -282,14 +274,11 @@
#define CONFIG_HAS_ETH2
#define CONFIG_HAS_ETH3
#endif
#define CONFIG_NET_MULTI 1
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CONFIG_PHY_DYNAMIC_ANEG 1
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
/*-----------------------------------------------------------------------
* USB-OHCI
*----------------------------------------------------------------------*/
@ -305,104 +294,30 @@
#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
#endif
/*-----------------------------------------------------------------------
* Default environment
*----------------------------------------------------------------------*/
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
/* Setup some board specific values for the default environment variables */
#ifdef CONFIG_CANYONLANDS
#define CONFIG_HOSTNAME canyonlands
#define CFG_BOOTFILE "bootfile=canyonlands/uImage\0"
#define CFG_DTBFILE "fdt_file=canyonlands/canyonlands.dtb\0"
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
#else
#define CONFIG_HOSTNAME glacier
#define CFG_BOOTFILE "bootfile=glacier/uImage\0"
#define CFG_DTBFILE "fdt_file=glacier/glacier.dtb\0"
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
#endif
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
CFG_BOOTFILE \
CFG_DTBFILE \
CFG_ROOTPATH \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr} - ${fdt_addr}\0" \
"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
"tftp ${fdt_addr_r} ${fdt_file}; " \
"run nfsargs addip addtty;" \
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
"kernel_addr_r=400000\0" \
"fdt_addr_r=800000\0" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_POWERPC \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
CONFIG_AMCC_DEF_ENV_NAND_UPD \
"kernel_addr=fc000000\0" \
"fdt_addr=fc1e0000\0" \
"ramdisk_addr=fc200000\0" \
"initrd_high=30000000\0" \
"load=tftp 200000 ${hostname}/u-boot.bin\0" \
"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \
"cp.b ${fileaddr} fffa0000 ${filesize};" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
"nload=tftp 200000 ${hostname}/u-boot-nand.bin\0" \
"nupdate=nand erase 0 100000;nand write 200000 0 100000;" \
"setenv filesize;saveenv\0" \
"nupd=run nload nupdate\0" \
"pciconfighost=1\0" \
"pcie_mode=RP:RP\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_SUBNETMASK
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DTT
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#ifdef CONFIG_460EX
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
@ -414,41 +329,6 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
/*-----------------------------------------------------------------------
* Miscellaneous configurable options
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/*-----------------------------------------------------------------------
* PCI stuff
*----------------------------------------------------------------------*/
@ -465,21 +345,6 @@
#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Internal Definitions
*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
@ -671,8 +536,4 @@
}
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

152
include/configs/ebony.h
View File

@ -35,9 +35,14 @@
#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME ebony
#include "amcc-common.h"
/*
* Define here the location of the environment variables (FLASH or NVRAM).
* Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
@ -55,7 +60,6 @@
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xff800000 /* start of FLASH */
#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
@ -74,18 +78,11 @@
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
/*-----------------------------------------------------------------------
* NVRAM/RTC
@ -141,10 +138,7 @@
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
@ -153,125 +147,31 @@
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=ebony\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/ebony/uImage\0" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_POWERPC \
CONFIG_AMCC_DEF_ENV_PPC_OLD \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
"kernel_addr=ff800000\0" \
"ramdisk_addr=ff810000\0" \
"initrd_high=30000000\0" \
"load=tftp 100000 /tftpboot/ebony/u-boot.bin\0" \
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
"cp.b 100000 fffc0000 40000;" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 8 /* PHY address */
#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_PHY1_ADDR 9 /* EMAC1 PHY address */
#define CONFIG_NET_MULTI 1
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_NETCONSOLE /* include NetConsole support */
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_ELF
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
@ -288,28 +188,4 @@
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

163
include/configs/katmai.h
View File

@ -37,8 +37,14 @@
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_440SPE 1 /* Specifc SPe support */
#undef CFG_DRAM_TEST /* Disable-takes long time */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
#define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME katmai
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
@ -48,7 +54,6 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xff000000 /* start of FLASH */
#define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */
#define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */
@ -78,10 +83,6 @@
#define CFG_ACE_BASE 0xfe000000 /* Xilinx ACE controller - Compact Flash */
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_MONITOR_LEN (0xFFFFFFFF - CFG_MONITOR_BASE + 1)
#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in internal SRAM)
*----------------------------------------------------------------------*/
@ -98,12 +99,8 @@
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#define CONFIG_SERIAL_MULTI 1
#undef CONFIG_UART1_CONSOLE
#undef CFG_EXT_SERIAL_CLOCK
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
* DDR SDRAM
@ -117,10 +114,7 @@
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
@ -172,139 +166,36 @@
*----------------------------------------------------------------------*/
#define CFG_ENV_IS_IN_FLASH 1 /* Environment uses flash */
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define xstr(s) str(s)
#define str(s) #s
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=katmai\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"net_nfs_fdt=tftp 200000 ${bootfile};" \
"tftp ${fdt_addr} ${fdt_file};" \
"run nfsargs addip addtty;" \
"bootm 200000 - ${fdt_addr}\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=katmai/uImage\0" \
"fdt_file=katmai/katmai.dtb\0" \
"fdt_addr=400000\0" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_POWERPC \
CONFIG_AMCC_DEF_ENV_PPC_OLD \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
"kernel_addr=fff10000\0" \
"ramdisk_addr=fff20000\0" \
"initrd_high=30000000\0" \
"load=tftp 200000 katmai/u-boot.bin\0" \
"update=protect off " xstr(CFG_MONITOR_BASE) " FFFFFFFF;" \
"era " xstr(CFG_MONITOR_BASE) " FFFFFFFF;" \
"cp.b ${fileaddr} " xstr(CFG_MONITOR_BASE) " ${filesize};" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
"kozio=bootm ffc60000\0" \
"pciconfighost=1\0" \
"pcie_mode=RP:RP:RP\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_DTT
#define CONFIG_CMD_ELF
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#define CONFIG_IBM_EMAC4_V4 1 /* 440SPe has this EMAC version */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#define CONFIG_HAS_ETH0
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
#define CONFIG_PHY_RESET_DELAY 1000
#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* needed for NetConsole */
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */
/*-----------------------------------------------------------------------
* FLASH related
@ -436,28 +327,4 @@
#define CFG_GPIO_TCR GPIO_VAL(CFG_GPIO_RS232_FORCEOFF)
#define CFG_GPIO_ODR 0
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /*Initial Memory map for Linux*/
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

276
include/configs/kilauea.h
View File

@ -1,4 +1,7 @@
/*
* Copyright (c) 2008 Nuovation System Designs, LLC
* Grant Erickson <gerickson@nuovations.com>
*
* (C) Copyright 2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
@ -36,6 +39,12 @@
#define CONFIG_405EX 1 /* Specifc 405EX support*/
#define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME kilauea
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
#define CONFIG_BOARD_EMAC_COUNT
@ -44,43 +53,70 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0xFC000000
#define CFG_NAND_ADDR 0xF8000000
#define CFG_FPGA_BASE 0xF0000000
#define CFG_PERIPHERAL_BASE 0xEF600000 /* internal peripherals*/
#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc() */
#define CFG_MONITOR_BASE (TEXT_BASE)
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer
*----------------------------------------------------------------------*/
#define CFG_INIT_RAM_ADDR 0x02000000 /* inside of SDRAM */
#define CFG_INIT_RAM_END (4 << 10)
* Initial RAM & Stack Pointer Configuration Options
*
* There are traditionally three options for the primordial
* (i.e. initial) stack usage on the 405-series:
*
* 1) On-chip Memory (OCM) (i.e. SRAM)
* 2) Data cache
* 3) SDRAM
*
* For the 405EX(r), there is no OCM, so we are left with (2) or (3)
* the latter of which is less than desireable since it requires
* setting up the SDRAM and ECC in assembly code.
*
* To use (2), define 'CFG_INIT_DCACHE_CS' to be an unused chip
* select on the External Bus Controller (EBC) and then select a
* value for 'CFG_INIT_RAM_ADDR' outside of the range of valid,
* physical SDRAM. Otherwise, undefine 'CFG_INIT_DCACHE_CS' and
* select a value for 'CFG_INIT_RAM_ADDR' within the range of valid,
* physical SDRAM to use (3).
*-----------------------------------------------------------------------*/
#define CFG_INIT_DCACHE_CS 4
#if defined(CFG_INIT_DCACHE_CS)
#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */
#else
#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + (32 << 20)) /* 32 MiB */
#endif /* defined(CFG_INIT_DCACHE_CS) */
#define CFG_INIT_RAM_END (4 << 10) /* 4 KiB */
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
/* reserve some memory for POST and BOOT limit info */
#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16)
/* extra data in init-ram */
#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
#define CFG_POST_MAGIC (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 8)
#define CFG_POST_VAL (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 12)
#define CFG_OCM_DATA_ADDR CFG_INIT_RAM_ADDR /* for commproc.c */
/*
* If the data cache is being used for the primordial stack and global
* data area, the POST word must be placed somewhere else. The General
* Purpose Timer (GPT) is unused by u-boot and the kernel and preserves
* its compare and mask register contents across reset, so it is used
* for the POST word.
*/
#if defined(CFG_INIT_DCACHE_CS)
# define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
# define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6)
#else
# define CFG_INIT_EXTRA_SIZE 16
# define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - CFG_INIT_EXTRA_SIZE)
# define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
# define CFG_OCM_DATA_ADDR CFG_INIT_RAM_ADDR
#endif /* defined(CFG_INIT_DCACHE_CS) */
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI 1
/* define this if you want console on UART1 */
#undef CONFIG_UART1_CONSOLE
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
@ -131,9 +167,9 @@
* This NAND U-Boot (NUB) is a special U-Boot version which can be started
* from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
*
* On 440EPx the SPL is copied to SDRAM before the NAND controller is
* set up. While still running from cache, I experienced problems accessing
* the NAND controller. sr - 2006-08-25
* On 405EX the SPL is copied to SDRAM before the NAND controller is
* set up. While still running from location 0xfffff000...0xffffffff the
* NAND controller cannot be accessed since it is attached to CS0 too.
*/
#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
@ -187,12 +223,54 @@
*----------------------------------------------------------------------*/
#define CFG_MBYTES_SDRAM (256) /* 256MB */
#define CFG_SDRAM0_MB0CF_BASE (( 0 << 20) + CFG_SDRAM_BASE)
/* DDR1/2 SDRAM Device Control Register Data Values */
#define CFG_SDRAM0_MB0CF ((CFG_SDRAM0_MB0CF_BASE >> 3) | \
SDRAM_RXBAS_SDSZ_256MB | \
SDRAM_RXBAS_SDAM_MODE7 | \
SDRAM_RXBAS_SDBE_ENABLE)
#define CFG_SDRAM0_MB1CF SDRAM_RXBAS_SDBE_DISABLE
#define CFG_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
#define CFG_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
#define CFG_SDRAM0_MCOPT1 0x04322000
#define CFG_SDRAM0_MCOPT2 0x00000000
#define CFG_SDRAM0_MODT0 0x01800000
#define CFG_SDRAM0_MODT1 0x00000000
#define CFG_SDRAM0_CODT 0x0080f837
#define CFG_SDRAM0_RTR 0x06180000
#define CFG_SDRAM0_INITPLR0 0xa8380000
#define CFG_SDRAM0_INITPLR1 0x81900400
#define CFG_SDRAM0_INITPLR2 0x81020000
#define CFG_SDRAM0_INITPLR3 0x81030000
#define CFG_SDRAM0_INITPLR4 0x81010404
#define CFG_SDRAM0_INITPLR5 0x81000542
#define CFG_SDRAM0_INITPLR6 0x81900400
#define CFG_SDRAM0_INITPLR7 0x8D080000
#define CFG_SDRAM0_INITPLR8 0x8D080000
#define CFG_SDRAM0_INITPLR9 0x8D080000
#define CFG_SDRAM0_INITPLR10 0x8D080000
#define CFG_SDRAM0_INITPLR11 0x81000442
#define CFG_SDRAM0_INITPLR12 0x81010780
#define CFG_SDRAM0_INITPLR13 0x81010400
#define CFG_SDRAM0_INITPLR14 0x00000000
#define CFG_SDRAM0_INITPLR15 0x00000000
#define CFG_SDRAM0_RQDC 0x80000038
#define CFG_SDRAM0_RFDC 0x00000209
#define CFG_SDRAM0_RDCC 0x40000000
#define CFG_SDRAM0_DLCR 0x030000a5
#define CFG_SDRAM0_CLKTR 0x80000000
#define CFG_SDRAM0_WRDTR 0x00000000
#define CFG_SDRAM0_SDTR1 0x80201000
#define CFG_SDRAM0_SDTR2 0x32204232
#define CFG_SDRAM0_SDTR3 0x080b0d1a
#define CFG_SDRAM0_MMODE 0x00000442
#define CFG_SDRAM0_MEMODE 0x00000404
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */
#define CFG_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */
@ -212,7 +290,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_M88E1111_PHY 1
#define CONFIG_IBM_EMAC4_V4 1
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
@ -220,107 +297,37 @@
#define CONFIG_HAS_ETH0 1
#define CONFIG_NET_MULTI 1
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#define CONFIG_PHY1_ADDR 2
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_POWERPC \
CONFIG_AMCC_DEF_ENV_PPC_OLD \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
CONFIG_AMCC_DEF_ENV_NAND_UPD \
"logversion=2\0" \
"netdev=eth0\0" \
"hostname=kilauea\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"flash_self_old=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
"flash_nfs_old=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr} - ${fdt_addr}\0" \
"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
"run nfsargs addip addtty;bootm ${kernel_addr_r}\0" \
"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
"tftp ${fdt_addr_r} ${fdt_file}; " \
"run nfsargs addip addtty;" \
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=kilauea/uImage\0" \
"fdt_file=kilauea/kilauea.dtb\0" \
"kernel_addr_r=400000\0" \
"fdt_addr_r=800000\0" \
"kernel_addr=fc000000\0" \
"fdt_addr=fc1e0000\0" \
"ramdisk_addr=fc200000\0" \
"initrd_high=30000000\0" \
"load=tftp 200000 kilauea/u-boot.bin\0" \
"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \
"cp.b ${fileaddr} fffa0000 ${filesize};" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
"nload=tftp 200000 kilauea/u-boot-nand.bin\0" \
"nupdate=nand erase 0 60000;nand write 200000 0 60000;" \
"setenv filesize;saveenv\0" \
"nupd=run nload nupdate\0" \
"pciconfighost=1\0" \
"pcie_mode=RP:RP\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_SUBNETMASK
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_LOG
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SNTP
/* POST support */
#define CONFIG_POST (CFG_POST_MEMORY | \
CFG_POST_CACHE | \
#define CONFIG_POST (CFG_POST_CACHE | \
CFG_POST_CPU | \
CFG_POST_ETHER | \
CFG_POST_I2C | \
@ -335,37 +342,6 @@
#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*-----------------------------------------------------------------------
* Miscellaneous configurable options
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
/*-----------------------------------------------------------------------
* PCI stuff
*----------------------------------------------------------------------*/
@ -394,13 +370,6 @@
/* base address of inbound PCIe window */
#define CFG_PCIE_INBOUND_BASE 0x0000000000000000ULL
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
@ -429,7 +398,7 @@
/* Memory Bank 2 (FPGA) initialization */
#define CFG_EBC_PB2AP 0x9400C800
#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0x800,BS=1MB,BU=R/W,BW=8bit */
#define CFG_EBC_PB2CR (CFG_FPGA_BASE | 0x18000)
#define CFG_EBC_CFG 0x7FC00000 /* EBC0_CFG */
@ -474,19 +443,6 @@
} \
}
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*-----------------------------------------------------------------------
* Some Kilauea stuff..., mainly fpga registers
*/
@ -522,8 +478,4 @@
#define CFG_FPGA_USER_LED0 0x00000200
#define CFG_FPGA_USER_LED1 0x00000100
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

148
include/configs/luan.h
View File

@ -37,6 +37,12 @@
#define CONFIG_440 1
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME luan
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
@ -44,11 +50,6 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc */
#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
#define CFG_SDRAM_BASE 0x00000000 /* MUST be zero */
#define CFG_LARGE_FLASH 0xffc00000 /* 4MB flash address CS0 */
#define CFG_SMALL_FLASH 0xff900000 /* 1MB flash address CS2 */
#define CFG_SRAM_BASE 0xff800000 /* 1MB SRAM address CS2 */
@ -68,7 +69,6 @@
#define CFG_FLASH_BASE CFG_SMALL_FLASH
#endif
#undef CFG_DRAM_TEST
#if CFG_SRAM_BASE
#define CFG_KBYTES_SDRAM 1024*2
#else
@ -88,13 +88,8 @@
* Serial Port
*----------------------------------------------------------------------*/
#define CFG_EXT_SERIAL_CLOCK 11059200 /* external 11.059MHz clk */
#define CONFIG_BAUDRATE 115200
#undef CONFIG_SERIAL_MULTI
#undef CONFIG_UART1_CONSOLE /* define if you want console on UART1 */
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
@ -139,10 +134,7 @@
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
@ -151,61 +143,22 @@
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=luan\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
":$(hostname):$(netdev):off panic=1\0" \
"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm $(kernel_addr)\0" \
"flash_self=run ramargs addip addtty;" \
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/luan/uImage\0" \
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_PPC \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
"kernel_addr=fc000000\0" \
"ramdisk_addr=fc100000\0" \
"initrd_high=30000000\0" \
"load=tftp 100000 /tftpboot/luan/u-boot.bin\0" \
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
"cp.b 100000 fffc0000 40000;" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_HAS_ETH0
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1
#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* needed for NetConsole */
#ifdef DEBUG
#define CONFIG_PANIC_HANG
#else
@ -213,60 +166,11 @@
#endif
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#undef CONFIG_LYNXKDI /* support kdi files */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
@ -287,28 +191,4 @@
#endif
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

272
include/configs/makalu.h
View File

@ -1,4 +1,7 @@
/*
* Copyright (c) 2008 Nuovation System Designs, LLC
* Grant Erickson <gerickson@nuovations.com>
*
* (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
@ -36,6 +39,13 @@
#define CONFIG_405EX 1 /* Specifc 405EX support*/
#define CONFIG_SYS_CLK_FREQ 33330000 /* ext frequency to pll */
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME makalu
#define CONFIG_ADDMISC "addmisc=setenv bootargs ${bootargs} rtc-x1205.probe=0,0x6f\0"
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
@ -43,42 +53,69 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0xFC000000
#define CFG_FPGA_BASE 0xF0000000
#define CFG_PERIPHERAL_BASE 0xEF600000 /* internal peripherals*/
#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc() */
#define CFG_MONITOR_BASE (TEXT_BASE)
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer
*----------------------------------------------------------------------*/
#define CFG_INIT_RAM_ADDR 0x02000000 /* inside of SDRAM */
#define CFG_INIT_RAM_END (4 << 10)
* Initial RAM & Stack Pointer Configuration Options
*
* There are traditionally three options for the primordial
* (i.e. initial) stack usage on the 405-series:
*
* 1) On-chip Memory (OCM) (i.e. SRAM)
* 2) Data cache
* 3) SDRAM
*
* For the 405EX(r), there is no OCM, so we are left with (2) or (3)
* the latter of which is less than desireable since it requires
* setting up the SDRAM and ECC in assembly code.
*
* To use (2), define 'CFG_INIT_DCACHE_CS' to be an unused chip
* select on the External Bus Controller (EBC) and then select a
* value for 'CFG_INIT_RAM_ADDR' outside of the range of valid,
* physical SDRAM. Otherwise, undefine 'CFG_INIT_DCACHE_CS' and
* select a value for 'CFG_INIT_RAM_ADDR' within the range of valid,
* physical SDRAM to use (3).
*-----------------------------------------------------------------------*/
#define CFG_INIT_DCACHE_CS 4
#if defined(CFG_INIT_DCACHE_CS)
#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */
#else
#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + (32 << 20)) /* 32 MiB */
#endif /* defined(CFG_INIT_DCACHE_CS) */
#define CFG_INIT_RAM_END (4 << 10) /* 4 KiB */
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
/* reserve some memory for POST and BOOT limit info */
#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16)
/* extra data in init-ram */
#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
#define CFG_POST_MAGIC (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 8)
#define CFG_POST_VAL (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 12)
#define CFG_OCM_DATA_ADDR CFG_INIT_RAM_ADDR /* for commproc.c */
/*
* If the data cache is being used for the primordial stack and global
* data area, the POST word must be placed somewhere else. The General
* Purpose Timer (GPT) is unused by u-boot and the kernel and preserves
* its compare and mask register contents across reset, so it is used
* for the POST word.
*/
#if defined(CFG_INIT_DCACHE_CS)
# define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
# define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6)
#else
# define CFG_INIT_EXTRA_SIZE 16
# define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - CFG_INIT_EXTRA_SIZE)
# define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
# define CFG_OCM_DATA_ADDR CFG_INIT_RAM_ADDR
#endif /* defined(CFG_INIT_DCACHE_CS) */
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#undef CFG_EXT_SERIAL_CLOCK /* no ext. clk */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI 1
/* define this if you want console on UART1 */
#undef CONFIG_UART1_CONSOLE
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
@ -113,14 +150,60 @@
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
#define CFG_MBYTES_SDRAM 256
#define CFG_MBYTES_SDRAM (256) /* 256MB */
#define CFG_SDRAM0_MB0CF_BASE (( 0 << 20) + CFG_SDRAM_BASE)
#define CFG_SDRAM0_MB1CF_BASE ((128 << 20) + CFG_SDRAM_BASE)
/* DDR1/2 SDRAM Device Control Register Data Values */
#define CFG_SDRAM0_MB0CF ((CFG_SDRAM0_MB0CF_BASE >> 3) | \
SDRAM_RXBAS_SDSZ_128MB | \
SDRAM_RXBAS_SDAM_MODE2 | \
SDRAM_RXBAS_SDBE_ENABLE)
#define CFG_SDRAM0_MB1CF ((CFG_SDRAM0_MB1CF_BASE >> 3) | \
SDRAM_RXBAS_SDSZ_128MB | \
SDRAM_RXBAS_SDAM_MODE2 | \
SDRAM_RXBAS_SDBE_ENABLE)
#define CFG_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
#define CFG_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
#define CFG_SDRAM0_MCOPT1 0x04322000
#define CFG_SDRAM0_MCOPT2 0x00000000
#define CFG_SDRAM0_MODT0 0x01800000
#define CFG_SDRAM0_MODT1 0x00000000
#define CFG_SDRAM0_CODT 0x0080f837
#define CFG_SDRAM0_RTR 0x06180000
#define CFG_SDRAM0_INITPLR0 0xa8380000
#define CFG_SDRAM0_INITPLR1 0x81900400
#define CFG_SDRAM0_INITPLR2 0x81020000
#define CFG_SDRAM0_INITPLR3 0x81030000
#define CFG_SDRAM0_INITPLR4 0x81010404
#define CFG_SDRAM0_INITPLR5 0x81000542
#define CFG_SDRAM0_INITPLR6 0x81900400
#define CFG_SDRAM0_INITPLR7 0x8D080000
#define CFG_SDRAM0_INITPLR8 0x8D080000
#define CFG_SDRAM0_INITPLR9 0x8D080000
#define CFG_SDRAM0_INITPLR10 0x8D080000
#define CFG_SDRAM0_INITPLR11 0x81000442
#define CFG_SDRAM0_INITPLR12 0x81010780
#define CFG_SDRAM0_INITPLR13 0x81010400
#define CFG_SDRAM0_INITPLR14 0x00000000
#define CFG_SDRAM0_INITPLR15 0x00000000
#define CFG_SDRAM0_RQDC 0x80000038
#define CFG_SDRAM0_RFDC 0x00000209
#define CFG_SDRAM0_RDCC 0x40000000
#define CFG_SDRAM0_DLCR 0x030000a5
#define CFG_SDRAM0_CLKTR 0x80000000
#define CFG_SDRAM0_WRDTR 0x00000000
#define CFG_SDRAM0_SDTR1 0x80201000
#define CFG_SDRAM0_SDTR2 0x32204232
#define CFG_SDRAM0_SDTR3 0x080b0d1a
#define CFG_SDRAM0_MMODE 0x00000442
#define CFG_SDRAM0_MEMODE 0x00000404
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */
#define CFG_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */
@ -140,7 +223,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_M88E1111_PHY 1
#define CONFIG_IBM_EMAC4_V4 1
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 6 /* PHY address, See schematics */
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
@ -148,104 +230,35 @@
#define CONFIG_HAS_ETH0 1
#define CONFIG_NET_MULTI 1
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#define CONFIG_PHY1_ADDR 0
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"logversion=2\0" \
"netdev=eth0\0" \
"hostname=makalu\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"addmisc=setenv bootargs ${bootargs} rtc-x1205.probe=0,0x6f\0" \
"flash_self_old=run ramargs addip addtty addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_self=run ramargs addip addtty addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
"flash_nfs_old=run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr}\0" \
"flash_nfs=run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr} - ${fdt_addr}\0" \
"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
"run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr_r}\0" \
"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
"tftp ${fdt_addr_r} ${fdt_file}; " \
"run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=makalu/uImage\0" \
"fdt_file=makalu/makalu.dtb\0" \
"kernel_addr_r=400000\0" \
"fdt_addr_r=800000\0" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_POWERPC \
CONFIG_AMCC_DEF_ENV_PPC_OLD \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
"kernel_addr=fc000000\0" \
"fdt_addr=fc1e0000\0" \
"ramdisk_addr=fc200000\0" \
"initrd_high=30000000\0" \
"load=tftp 200000 makalu/u-boot.bin\0" \
"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \
"cp.b ${fileaddr} fffa0000 ${filesize};" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
"pciconfighost=1\0" \
"pcie_mode=RP:RP\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_SUBNETMASK
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_LOG
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SNTP
/* POST support */
#define CONFIG_POST (CFG_POST_MEMORY | \
CFG_POST_CACHE | \
#define CONFIG_POST (CFG_POST_CACHE | \
CFG_POST_CPU | \
CFG_POST_ETHER | \
CFG_POST_I2C | \
@ -260,37 +273,6 @@
#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*-----------------------------------------------------------------------
* Miscellaneous configurable options
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
/*-----------------------------------------------------------------------
* PCI stuff
*----------------------------------------------------------------------*/
@ -319,13 +301,6 @@
/* base address of inbound PCIe window */
#define CFG_PCIE_INBOUND_BASE 0x0000000000000000ULL
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
@ -384,21 +359,4 @@
#define CFG_GPIO_PCIE_CLKREQ 27
#define CFG_GPIO_PCIE_WAKE 28
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

152
include/configs/ocotea.h
View File

@ -44,16 +44,19 @@
#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME ocotea
#include "amcc-common.h"
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xff800000 /* start of FLASH */
#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
@ -75,18 +78,11 @@
#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
* Environment
@ -156,10 +152,7 @@
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
@ -168,54 +161,17 @@
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=ocotea\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/ocotea/uImage\0" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_PPC \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
"kernel_addr=fff00000\0" \
"ramdisk_addr=fff10000\0" \
"initrd_high=30000000\0" \
"load=tftp 100000 /tftpboot/ocotea/u-boot.bin\0" \
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
"cp.b 100000 fffc0000 40000;" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_NET_MULTI 1
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#define CONFIG_PHY1_ADDR 2
#define CONFIG_PHY2_ADDR 0x10
@ -228,73 +184,15 @@
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
#define CONFIG_PHY_RESET_DELAY 1000
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_NETCONSOLE /* include NetConsole support */
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_ELF
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
@ -311,28 +209,4 @@
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

173
include/configs/sequoia.h
View File

@ -34,11 +34,19 @@
/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */
#ifndef CONFIG_RAINIER
#define CONFIG_440EPX 1 /* Specific PPC440EPx */
#define CONFIG_HOSTNAME sequoia
#else
#define CONFIG_440GRX 1 /* Specific PPC440GRx */
#define CONFIG_HOSTNAME rainier
#endif
#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
/*
* Include common defines/options for all AMCC eval boards
*/
#include "amcc-common.h"
/* Detect Sequoia PLL input clock automatically via CPLD bit */
#define CONFIG_SYS_CLK_FREQ ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \
33333333 : 33000000)
@ -64,19 +72,9 @@
* Base addresses -- Note these are effective addresses where the actual
* resources get mapped (not physical addresses).
*/
#ifndef CONFIG_VIDEO
#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kiB for Monitor */
#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kiB for malloc() */
#else
#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
#define CFG_MALLOC_LEN (1024 * 1024) /* Reserve 1024 kB for malloc() */
#endif
#define CFG_TLB_FOR_BOOT_FLASH 0x0003
#define CFG_BOOT_BASE_ADDR 0xf0000000
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */
#define CFG_OCM_BASE 0xe0010000 /* ocm */
#define CFG_OCM_DATA_ADDR CFG_OCM_BASE
@ -108,14 +106,9 @@
* Serial Port
*/
#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI 1
/* define this if you want console on UART1 */
#undef CONFIG_UART1_CONSOLE
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*
* Environment
*/
@ -227,10 +220,7 @@
/*
* I2C
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
@ -247,80 +237,27 @@
#define CFG_DTT_LOW_TEMP -30
#define CFG_DTT_HYSTERESIS 3
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
/* Setup some board specific values for the default environment variables */
#ifndef CONFIG_RAINIER
#define CONFIG_HOSTNAME sequoia
#define CFG_BOOTFILE "bootfile=sequoia/uImage\0"
#define CFG_DTBFILE "fdt_file=sequoia/sequoia.dtb\0"
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
#else
#define CONFIG_HOSTNAME rainier
#define CFG_BOOTFILE "bootfile=rainier/uImage\0"
#define CFG_DTBFILE "fdt_file=rainier/rainier.dtb\0"
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
#endif
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
CFG_BOOTFILE \
CFG_ROOTPATH \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"addmisc=setenv bootargs ${bootargs}\0" \
"flash_nfs=run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};" \
"run nfsargs addip addtty addmisc;" \
"bootm\0" \
"fdt_file=sequoia/sequoia.dtb\0" \
"fdt_addr=400000\0" \
"net_nfs_fdt=tftp 200000 ${bootfile};" \
"tftp ${fdt_addr} ${fdt_file};" \
"run nfsargs addip addtty addmisc;" \
"bootm 200000 - ${fdt_addr}\0" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_POWERPC \
CONFIG_AMCC_DEF_ENV_PPC_OLD \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
CONFIG_AMCC_DEF_ENV_NAND_UPD \
"kernel_addr=FC000000\0" \
"ramdisk_addr=FC180000\0" \
"load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \
"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
"cp.b 200000 FFFA0000 60000\0" \
"upd=run load update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_M88E1111_PHY 1
#define CONFIG_IBM_EMAC4_V4 1
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CONFIG_HAS_ETH0
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx */
/* buffers & descriptors */
#define CONFIG_NET_MULTI 1
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#define CONFIG_PHY1_ADDR 1
@ -347,35 +284,12 @@
#define CONFIG_ISO_PARTITION
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_SUBNETMASK
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DTT
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#ifdef CONFIG_440EPX
@ -406,35 +320,6 @@
#define CONFIG_SUPPORT_VFAT
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
/* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*
* PCI stuff
*/
@ -452,13 +337,6 @@
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data have to be in the
* first 8 MB of memory, since this is the maximum mapped by the Linux kernel
* during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* External Bus Controller (EBC) Setup
*/
@ -577,23 +455,6 @@
} \
}
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#ifdef CONFIG_VIDEO
#define CONFIG_BIOSEMU /* x86 bios emulator for vga bios */
#define CONFIG_ATI_RADEON_FB /* use radeon framebuffer driver */

146
include/configs/taihu.h
View File

@ -32,6 +32,12 @@
#define CONFIG_4xx 1 /* member of PPC4xx family */
#define CONFIG_TAIHU 1 /* on a taihu board */
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME taihu
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f */
#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
@ -70,87 +76,31 @@
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootfile=/tftpboot/taihu/uImage\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"netdev=eth0\0" \
"hostname=taihu\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_PPC \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
"kernel_addr=FC000000\0" \
"ramdisk_addr=FC180000\0" \
"load=tftp 200000 /tftpboot/taihu/u-boot.bin\0" \
"update=protect off FFFC0000 FFFFFFFF;era FFFC0000 FFFFFFFF;" \
"cp.b 200000 FFFC0000 40000\0" \
"upd=run load update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0x14 /* PHY address */
#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_PHY1_ADDR 0x10 /* EMAC1 PHY address */
#define CONFIG_NET_MULTI 1
#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_PHY_RESET 1
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SPI
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_SPD_EEPROM /* use SPD EEPROM for setup */
#define CFG_SDRAM_SIZE_PER_BANK 0x04000000 /* 64MB */
#define CFG_SDRAM_BANKS 2
@ -168,23 +118,6 @@
#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
#define CFG_SDRAM_tRFC 66 /* Auto refresh period */
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
/*
* If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
* If CFG_405_UART_ERRATA_59, then UART divisor is 31.
@ -198,35 +131,13 @@
#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
#define CFG_BASE_BAUD 691200
#define CONFIG_BAUDRATE 115200
#define CONFIG_UART1_CONSOLE 1
/* The following table includes the supported baudrates */
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
/*-----------------------------------------------------------------------
* I2C stuff
*-----------------------------------------------------------------------
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES { 0x69 } /* avoid iprobe hangup (why?) */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */
@ -278,25 +189,12 @@ unsigned char spi_read(void);
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0xFFE00000
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
@ -421,21 +319,5 @@ unsigned char spi_read(void);
#define CPLD_REG0_ADDR 0x50100000
#define CPLD_REG1_ADDR 0x50100001
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

161
include/configs/taishan.h
View File

@ -32,9 +32,15 @@
#define CONFIG_440GX 1 /* Specifc GX support */
#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME taishan
#define CONFIG_USE_TTY ttyS1
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
@ -42,9 +48,7 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
@ -70,19 +74,11 @@
#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/
#define CFG_MALLOC_LEN (1024 * 1024) /* Reserve 1024 kB for malloc*/
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#define CONFIG_UART1_CONSOLE 1 /* use of UART1 as console */
#define CONFIG_SERIAL_MULTI 1 /* enable serial multi support */
#define CFG_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
* Environment
@ -138,10 +134,7 @@
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#undef CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR 0x50
@ -159,65 +152,23 @@
#define CFG_DTT_LOW_TEMP -30
#define CFG_DTT_HYSTERESIS 3
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=taishan\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/taishan/uImage\0" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_POWERPC \
CONFIG_AMCC_DEF_ENV_PPC_OLD \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
"kernel_addr=fc000000\0" \
"ramdisk_addr=fc180000\0" \
"initrd_high=30000000\0" \
"load=tftp 100000 /tftpboot/taishan/u-boot.bin\0" \
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
"cp.b 100000 fffc0000 40000;" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
"fixedip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \
"$(gatewayip):$(netmask):$(hostname):$(netdev):off panic=1\0" \
"dhcp=setenv bootargs $(bootargs) ip=dhcp\0" \
"kozio=bootm 0xffe00000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
/*-----------------------------------------------------------------------
* Networking
*----------------------------------------------------------------------*/
#define CONFIG_EMAC_NR_START 2 /* start with EMAC 2 (skip 0&1) */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_NET_MULTI 1
#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
#define CONFIG_PHY2_ADDR 0x1
@ -230,70 +181,12 @@
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
#define CONFIG_PHY_RESET_DELAY 1000
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_NETCONSOLE /* include NetConsole support */
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_DTT
#define CONFIG_CMD_ELF
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*-----------------------------------------------------------------------
* Miscellaneous configurable options
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*-----------------------------------------------------------------------
* PCI stuff
@ -312,28 +205,4 @@
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

155
include/configs/walnut.h
View File

@ -38,121 +38,43 @@
#define CONFIG_WALNUT 1 /* ...on a WALNUT board */
/* ...and on a SYCAMORE board */
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME walnut
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=walnut\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/walnut/uImage\0" \
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_POWERPC \
CONFIG_AMCC_DEF_ENV_PPC_OLD \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
"kernel_addr=fff80000\0" \
"ramdisk_addr=fff80000\0" \
"initrd_high=30000000\0" \
"load=tftp 100000 /tftpboot/walnut/u-boot.bin\0" \
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
"cp.b 100000 fffc0000 40000;" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
""
#define CONFIG_BOOTCOMMAND "run net_nfs"
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
#define CONFIG_HAS_ETH0 1
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* needed for NetConsole */
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
/*
* If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
* If CFG_405_UART_ERRATA_59, then UART divisor is 31.
@ -167,29 +89,11 @@
#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
#define CFG_BASE_BAUD 691200
/* The following table includes the supported baudrates */
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*-----------------------------------------------------------------------
* I2C stuff
*-----------------------------------------------------------------------
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
@ -224,13 +128,8 @@
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0xFFF80000
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
/*
* Define here the location of the environment variables (FLASH or NVRAM).
@ -243,13 +142,6 @@
#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
#endif
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
@ -335,21 +227,4 @@
*/
#define SPD_EEPROM_ADDRESS 0x50
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

164
include/configs/yosemite.h
View File

@ -42,6 +42,11 @@
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
/*
* Include common defines/options for all AMCC eval boards
*/
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
#define CONFIG_BOARD_RESET 1 /* call board_reset() */
@ -50,10 +55,6 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/
#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
@ -84,14 +85,9 @@
* Serial Port
*----------------------------------------------------------------------*/
#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SERIAL_MULTI 1
/*define this if you want console on UART1*/
#undef CONFIG_UART1_CONSOLE
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
@ -142,10 +138,7 @@
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
@ -167,72 +160,22 @@
#define CFG_DTT_LOW_TEMP -30
#define CFG_DTT_HYSTERESIS 3
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
/* Setup some board specific values for the default environment variables */
#ifndef CONFIG_YELLOWSTONE
#define CONFIG_HOSTNAME yosemite
#define CFG_BOOTFILE "bootfile=/tftpboot/yosemite/uImage\0"
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
#else
#define CONFIG_HOSTNAME yellowstone
#define CFG_BOOTFILE "bootfile=/tftpboot/yellowstone/uImage\0"
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
#endif
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
CFG_BOOTFILE \
CFG_ROOTPATH \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"bootfile=/tftpboot/${hostname}/uImage\0" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_POWERPC \
CONFIG_AMCC_DEF_ENV_PPC_OLD \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
"kernel_addr=fc000000\0" \
"ramdisk_addr=fc180000\0" \
"load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \
"update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \
"cp.b 200000 fff80000 80000;" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_NET_MULTI 1 /* required for netconsole */
#define CONFIG_PHY1_ADDR 3
#define CONFIG_HAS_ETH0 1 /* add support for "ethaddr" */
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_PHY1_ADDR 3
/* Partitions */
#define CONFIG_MAC_PARTITION
@ -263,36 +206,11 @@
#define CONFIG_HW_WATCHDOG /* watchdog */
#endif
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_DTT
#define CONFIG_CMD_ELF
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#ifdef CONFIG_440EP
#define CONFIG_CMD_USB
@ -300,36 +218,6 @@
#define CONFIG_CMD_EXT2
#endif
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_LYNXKDI 1 /* support kdi files */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
@ -347,13 +235,6 @@
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
@ -370,21 +251,4 @@
#define CFG_BCSR5_PCI66EN 0x80
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

152
include/configs/yucca.h
View File

@ -38,13 +38,18 @@
#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_440SPE 1 /* Specifc SPe support */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* Disable-takes long time */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
#define EXTCLK_33_33 33333333
#define EXTCLK_66_66 66666666
#define EXTCLK_50 50000000
#define EXTCLK_83 83333333
/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME yucca
#include "amcc-common.h"
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
#undef CONFIG_SHOW_BOOT_PROGRESS
#undef CONFIG_STRESS
@ -53,9 +58,7 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */
#define CFG_MONITOR_BASE 0xfffb0000 /* start of monitor */
#define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */
#define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */
@ -99,24 +102,15 @@
#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
#define CFG_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Mon */
#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#define CONFIG_SERIAL_MULTI 1
#undef CONFIG_UART1_CONSOLE
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#undef CFG_EXT_SERIAL_CLOCK
/* #define CFG_EXT_SERIAL_CLOCK (1843200 * 6) */ /* Ext clk @ 11.059 MHz */
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
@ -127,10 +121,7 @@
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define IIC0_BOOTPROM_ADDR 0x50
#define IIC0_ALT_BOOTPROM_ADDR 0x54
@ -153,123 +144,32 @@
#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=yucca\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=yucca/uImage\0" \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_PPC \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
"kernel_addr=E7F10000\0" \
"ramdisk_addr=E7F20000\0" \
"initrd_high=30000000\0" \
"load=tftp 100000 yuca/u-boot.bin\0" \
"update=protect off 2:4-7;era 2:4-7;" \
"cp.b ${fileaddr} FFFB0000 ${filesize};" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
"pciconfighost=1\0" \
"pcie_mode=RP:EP:EP\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
/*
* BOOTP options
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_ELF
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#define CONFIG_IBM_EMAC4_V4 1
#define CONFIG_MII 1 /* MII PHY management */
#undef CONFIG_NET_MULTI
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#define CONFIG_HAS_ETH0
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
#define CONFIG_PHY_RESET_DELAY 1000
#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* needed for NetConsole */
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*-----------------------------------------------------------------------
* FLASH related
@ -318,26 +218,6 @@
/* Support for Intel 82557/82559/82559ER chips. */
#define CONFIG_EEPRO100
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /*Initial Memory map for Linux*/
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* FB Divisor selection */
#define FPGA_FB_DIV_6 6
#define FPGA_FB_DIV_10 10
@ -539,10 +419,4 @@
#define PERIOD_33_33MHZ 30000 /* 30ns */
#define PERIOD_25_00MHZ 40000 /* 40ns */
/*---------------------------------------------------------------------------*/
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */

527
include/ppc405.h
View File

@ -22,6 +22,10 @@
#ifndef __PPC405_H__
#define __PPC405_H__
/* Define bits and masks for real-mode storage attribute control registers */
#define PPC_128MB_SACR_BIT(addr) ((addr) >> 27)
#define PPC_128MB_SACR_VALUE(addr) PPC_REG_VAL(PPC_128MB_SACR_BIT(addr),1)
#ifndef CONFIG_IOP480
#define CFG_DCACHE_SIZE (16 << 10) /* For AMCC 405 CPUs */
#else
@ -363,31 +367,118 @@
#endif /* defined(CONFIG_405EZ) */
/******************************************************************************
* SDRAM Controller
******************************************************************************/
/* values for memcfga register - indirect addressing of these regs */
#ifndef CONFIG_405EP
#define mem_besra 0x00 /* bus error syndrome reg a */
#define mem_besrsa 0x04 /* bus error syndrome reg set a */
#define mem_besrb 0x08 /* bus error syndrome reg b */
#define mem_besrsb 0x0c /* bus error syndrome reg set b */
#define mem_bear 0x10 /* bus error address reg */
#endif
#define mem_mcopt1 0x20 /* memory controller options 1 */
#define mem_status 0x24 /* memory status */
#define mem_rtr 0x30 /* refresh timer reg */
#define mem_pmit 0x34 /* power management idle timer */
#define mem_mb0cf 0x40 /* memory bank 0 configuration */
#define mem_mb1cf 0x44 /* memory bank 1 configuration */
#ifndef CONFIG_405EP
#define mem_mb2cf 0x48 /* memory bank 2 configuration */
#define mem_mb3cf 0x4c /* memory bank 3 configuration */
#endif
#define mem_sdtr1 0x80 /* timing reg 1 */
#ifndef CONFIG_405EP
#define mem_ecccf 0x94 /* ECC configuration */
#define mem_eccerr 0x98 /* ECC error status */
#endif
* External Bus Controller (EBC)
*****************************************************************************/
/* Bank Configuration Register */
#define EBC_BXCR_BAS_MASK PPC_REG_VAL(11, 0xFFF)
#define EBC_BXCR_BAS_ENCODE(n) (((static_cast(unsigned long, n)) & \
EBC_BXCR_BAS_MASK) << 0)
#define EBC_BXCR_BS_MASK PPC_REG_VAL(14, 0x7)
#define EBC_BXCR_BS_1MB PPC_REG_VAL(14, 0x0)
#define EBC_BXCR_BS_2MB PPC_REG_VAL(14, 0x1)
#define EBC_BXCR_BS_4MB PPC_REG_VAL(14, 0x2)
#define EBC_BXCR_BS_8MB PPC_REG_VAL(14, 0x3)
#define EBC_BXCR_BS_16MB PPC_REG_VAL(14, 0x4)
#define EBC_BXCR_BS_32MB PPC_REG_VAL(14, 0x5)
#define EBC_BXCR_BS_64MB PPC_REG_VAL(14, 0x6)
#define EBC_BXCR_BS_128MB PPC_REG_VAL(14, 0x7)
#define EBC_BXCR_BU_MASK PPC_REG_VAL(16, 0x3)
#define EBC_BXCR_BU_NONE PPC_REG_VAL(16, 0x0)
#define EBC_BXCR_BU_R PPC_REG_VAL(16, 0x1)
#define EBC_BXCR_BU_W PPC_REG_VAL(16, 0x2)
#define EBC_BXCR_BU_RW PPC_REG_VAL(16, 0x3)
#define EBC_BXCR_BW_MASK PPC_REG_VAL(18, 0x3)
#define EBC_BXCR_BW_8BIT PPC_REG_VAL(18, 0x0)
#define EBC_BXCR_BW_16BIT PPC_REG_VAL(18, 0x1)
#define EBC_BXCR_BW_32BIT PPC_REG_VAL(18, 0x3)
/* Bank Access Parameter Register */
#define EBC_BXAP_BME_ENABLED PPC_REG_VAL(0, 0x1)
#define EBC_BXAP_BME_DISABLED PPC_REG_VAL(0, 0x0)
#define EBC_BXAP_TWT_ENCODE(n) PPC_REG_VAL(8, \
(static_cast(unsigned long, n)) \
& 0xFF)
#define EBC_BXAP_FWT_ENCODE(n) PPC_REG_VAL(5, \
(static_cast(unsigned long, n)) \
& 0x1F)
#define EBC_BXAP_BWT_ENCODE(n) PPC_REG_VAL(8, \
(static_cast(unsigned long, n)) \
& 0x7)
#define EBC_BXAP_BCE_DISABLE PPC_REG_VAL(9, 0x0)
#define EBC_BXAP_BCE_ENABLE PPC_REG_VAL(9, 0x1)
#define EBC_BXAP_BCT_MASK PPC_REG_VAL(11, 0x3)
#define EBC_BXAP_BCT_2TRANS PPC_REG_VAL(11, 0x0)
#define EBC_BXAP_BCT_4TRANS PPC_REG_VAL(11, 0x1)
#define EBC_BXAP_BCT_8TRANS PPC_REG_VAL(11, 0x2)
#define EBC_BXAP_BCT_16TRANS PPC_REG_VAL(11, 0x3)
#define EBC_BXAP_CSN_ENCODE(n) PPC_REG_VAL(13, \
(static_cast(unsigned long, n)) \
& 0x3)
#define EBC_BXAP_OEN_ENCODE(n) PPC_REG_VAL(15, \
(static_cast(unsigned long, n)) \
& 0x3)
#define EBC_BXAP_WBN_ENCODE(n) PPC_REG_VAL(17, \
(static_cast(unsigned long, n)) \
& 0x3)
#define EBC_BXAP_WBF_ENCODE(n) PPC_REG_VAL(19, \
(static_cast(unsigned long, n)) \
& 0x3)
#define EBC_BXAP_TH_ENCODE(n) PPC_REG_VAL(22, \
(static_cast(unsigned long, n)) \
& 0x7)
#define EBC_BXAP_RE_ENABLED PPC_REG_VAL(23, 0x1)
#define EBC_BXAP_RE_DISABLED PPC_REG_VAL(23, 0x0)
#define EBC_BXAP_SOR_DELAYED PPC_REG_VAL(24, 0x0)
#define EBC_BXAP_SOR_NONDELAYED PPC_REG_VAL(24, 0x1)
#define EBC_BXAP_BEM_WRITEONLY PPC_REG_VAL(25, 0x0)
#define EBC_BXAP_BEM_RW PPC_REG_VAL(25, 0x1)
#define EBC_BXAP_PEN_DISABLED PPC_REG_VAL(26, 0x0)
#define EBC_BXAP_PEN_ENABLED PPC_REG_VAL(26, 0x1)
/* Configuration Register */
#define EBC_CFG_LE_MASK PPC_REG_VAL(0, 0x1)
#define EBC_CFG_LE_UNLOCK PPC_REG_VAL(0, 0x0)
#define EBC_CFG_LE_LOCK PPC_REG_VAL(0, 0x1)
#define EBC_CFG_PTD_MASK PPC_REG_VAL(1, 0x1)
#define EBC_CFG_PTD_ENABLE PPC_REG_VAL(1, 0x0)
#define EBC_CFG_PTD_DISABLE PPC_REG_VAL(1, 0x1)
#define EBC_CFG_RTC_MASK PPC_REG_VAL(4, 0x7)
#define EBC_CFG_RTC_16PERCLK PPC_REG_VAL(4, 0x0)
#define EBC_CFG_RTC_32PERCLK PPC_REG_VAL(4, 0x1)
#define EBC_CFG_RTC_64PERCLK PPC_REG_VAL(4, 0x2)
#define EBC_CFG_RTC_128PERCLK PPC_REG_VAL(4, 0x3)
#define EBC_CFG_RTC_256PERCLK PPC_REG_VAL(4, 0x4)
#define EBC_CFG_RTC_512PERCLK PPC_REG_VAL(4, 0x5)
#define EBC_CFG_RTC_1024PERCLK PPC_REG_VAL(4, 0x6)
#define EBC_CFG_RTC_2048PERCLK PPC_REG_VAL(4, 0x7)
#define EBC_CFG_ATC_MASK PPC_REG_VAL(5, 0x1)
#define EBC_CFG_ATC_HI PPC_REG_VAL(5, 0x0)
#define EBC_CFG_ATC_PREVIOUS PPC_REG_VAL(5, 0x1)
#define EBC_CFG_DTC_MASK PPC_REG_VAL(6, 0x1)
#define EBC_CFG_DTC_HI PPC_REG_VAL(6, 0x0)
#define EBC_CFG_DTC_PREVIOUS PPC_REG_VAL(6, 0x1)
#define EBC_CFG_CTC_MASK PPC_REG_VAL(7, 0x1)
#define EBC_CFG_CTC_HI PPC_REG_VAL(7, 0x0)
#define EBC_CFG_CTC_PREVIOUS PPC_REG_VAL(7, 0x1)
#define EBC_CFG_OEO_MASK PPC_REG_VAL(8, 0x1)
#define EBC_CFG_OEO_DISABLE PPC_REG_VAL(8, 0x0)
#define EBC_CFG_OEO_ENABLE PPC_REG_VAL(8, 0x1)
#define EBC_CFG_EMC_MASK PPC_REG_VAL(9, 0x1)
#define EBC_CFG_EMC_NONDEFAULT PPC_REG_VAL(9, 0x0)
#define EBC_CFG_EMC_DEFAULT PPC_REG_VAL(9, 0x1)
#define EBC_CFG_PME_MASK PPC_REG_VAL(14, 0x1)
#define EBC_CFG_PME_DISABLE PPC_REG_VAL(14, 0x0)
#define EBC_CFG_PME_ENABLE PPC_REG_VAL(14, 0x1)
#define EBC_CFG_PMT_MASK PPC_REG_VAL(19, 0x1F)
#define EBC_CFG_PMT_ENCODE(n) PPC_REG_VAL(19, \
(static_cast(unsigned long, n)) \
& 0x1F)
#define EBC_CFG_PR_MASK PPC_REG_VAL(21, 0x3)
#define EBC_CFG_PR_16 PPC_REG_VAL(21, 0x0)
#define EBC_CFG_PR_32 PPC_REG_VAL(21, 0x1)
#define EBC_CFG_PR_64 PPC_REG_VAL(21, 0x2)
#define EBC_CFG_PR_128 PPC_REG_VAL(21, 0x3)
#ifndef CONFIG_405EP
/******************************************************************************
@ -1163,369 +1254,6 @@
#if defined(CONFIG_405EX)
#define SDR0_SRST 0x0200
#define SDRAM_BESR0 0x00
#define SDRAM_BEARL 0x02
#define SDRAM_BEARU 0x03
#define SDRAM_WMIRQ 0x06 /**/
#define SDRAM_PLBOPT 0x08 /**/
#define SDRAM_PUABA 0x09 /**/
#define SDRAM_MCSTAT 0x1F /* memory controller status */
#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */
#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */
#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */
#define SDRAM_CODT 0x26 /* on die termination for controller */
#define SDRAM_VVPR 0x27 /* variable VRef programmming */
#define SDRAM_OPARS 0x28 /* on chip driver control setup */
#define SDRAM_OPART 0x29 /* on chip driver control trigger */
#define SDRAM_RTR 0x30 /* refresh timer */
#define SDRAM_PMIT 0x34 /* power management idle timer */
#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */
#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */
#define SDRAM_MB2CF 0x48 /* memory bank 2 configuration */
#define SDRAM_MB3CF 0x4C /* memory bank 3 configuration */
#define SDRAM_INITPLR0 0x50 /* manual initialization control */
#define SDRAM_INITPLR1 0x51 /* manual initialization control */
#define SDRAM_INITPLR2 0x52 /* manual initialization control */
#define SDRAM_INITPLR3 0x53 /* manual initialization control */
#define SDRAM_INITPLR4 0x54 /* manual initialization control */
#define SDRAM_INITPLR5 0x55 /* manual initialization control */
#define SDRAM_INITPLR6 0x56 /* manual initialization control */
#define SDRAM_INITPLR7 0x57 /* manual initialization control */
#define SDRAM_INITPLR8 0x58 /* manual initialization control */
#define SDRAM_INITPLR9 0x59 /* manual initialization control */
#define SDRAM_INITPLR10 0x5a /* manual initialization control */
#define SDRAM_INITPLR11 0x5b /* manual initialization control */
#define SDRAM_INITPLR12 0x5c /* manual initialization control */
#define SDRAM_INITPLR13 0x5d /* manual initialization control */
#define SDRAM_INITPLR14 0x5e /* manual initialization control */
#define SDRAM_INITPLR15 0x5f /* manual initialization control */
#define SDRAM_RQDC 0x70 /* read DQS delay control */
#define SDRAM_RFDC 0x74 /* read feedback delay control */
#define SDRAM_RDCC 0x78 /* read data capture control */
#define SDRAM_DLCR 0x7A /* delay line calibration */
#define SDRAM_CLKTR 0x80 /* DDR clock timing */
#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */
#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */
#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */
#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */
#define SDRAM_MMODE 0x88 /* memory mode */
#define SDRAM_MEMODE 0x89 /* memory extended mode */
#define SDRAM_ECCCR 0x98 /* ECC error status */
#define SDRAM_RID 0xF8 /* revision ID */
/*-----------------------------------------------------------------------------+
| Memory Bank 0-7 configuration
+-----------------------------------------------------------------------------*/
#define SDRAM_RXBAS_SDSZ_4 0x00000000 /* 4M */
#define SDRAM_RXBAS_SDSZ_8 0x00001000 /* 8M */
#define SDRAM_RXBAS_SDSZ_16 0x00002000 /* 16M */
#define SDRAM_RXBAS_SDSZ_32 0x00003000 /* 32M */
#define SDRAM_RXBAS_SDSZ_64 0x00004000 /* 64M */
#define SDRAM_RXBAS_SDSZ_128 0x00005000 /* 128M */
#define SDRAM_RXBAS_SDSZ_256 0x00006000 /* 256M */
#define SDRAM_RXBAS_SDSZ_512 0x00007000 /* 512M */
#define SDRAM_RXBAS_SDSZ_1024 0x00008000 /* 1024M */
#define SDRAM_RXBAS_SDSZ_2048 0x00009000 /* 2048M */
#define SDRAM_RXBAS_SDSZ_4096 0x0000a000 /* 4096M */
#define SDRAM_RXBAS_SDSZ_8192 0x0000b000 /* 8192M */
/*-----------------------------------------------------------------------------+
| Memory Controller Status
+-----------------------------------------------------------------------------*/
#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
#define SDRAM_MCSTAT_SRMS_MASK 0x80000000 /* Mem self refresh stat mask */
#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
#define SDRAM_MCSTAT_SRMS_SF 0x80000000 /* Mem in self refresh */
/*-----------------------------------------------------------------------------+
| Memory Controller Options 1
+-----------------------------------------------------------------------------*/
#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask */
#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */
#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */
#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */
#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/
#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((unsigned long)(n))>>28)&0x3)
#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */
#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */
#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */
#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */
#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */
#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */
#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */
#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */
#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */
#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */
#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */
#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */
#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */
#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */
#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */
#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */
#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */
#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */
#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */
#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */
#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */
#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */
#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */
#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */
#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */
#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */
#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */
#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */
#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */
/*-----------------------------------------------------------------------------+
| Memory Controller Options 2
+-----------------------------------------------------------------------------*/
#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */
#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */
#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */
#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */
#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */
#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */
#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */
#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */
#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */
#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */
#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */
#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */
#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */
#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */
#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */
#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/
#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */
#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */
/*-----------------------------------------------------------------------------+
| SDRAM Refresh Timer Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RTR_RINT_MASK 0xFFF80000
#define SDRAM_RTR_RINT_ENCODE(n) ((((unsigned long)(n))&0xFFF8)<<16)
#define SDRAM_RTR_RINT_DECODE(n) ((((unsigned long)(n))>>16)&0xFFF8)
/*-----------------------------------------------------------------------------+
| SDRAM Read DQS Delay Control Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RQDC_RQDE_MASK 0x80000000
#define SDRAM_RQDC_RQDE_DISABLE 0x00000000
#define SDRAM_RQDC_RQDE_ENABLE 0x80000000
#define SDRAM_RQDC_RQFD_MASK 0x000001FF
#define SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
#define SDRAM_RQDC_RQFD_MAX 0xFF
/*-----------------------------------------------------------------------------+
| SDRAM Read Data Capture Control Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RDCC_RDSS_MASK 0xC0000000
#define SDRAM_RDCC_RDSS_T1 0x00000000
#define SDRAM_RDCC_RDSS_T2 0x40000000
#define SDRAM_RDCC_RDSS_T3 0x80000000
#define SDRAM_RDCC_RDSS_T4 0xC0000000
#define SDRAM_RDCC_RSAE_MASK 0x00000001
#define SDRAM_RDCC_RSAE_DISABLE 0x00000001
#define SDRAM_RDCC_RSAE_ENABLE 0x00000000
/*-----------------------------------------------------------------------------+
| SDRAM Read Feedback Delay Control Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RFDC_ARSE_MASK 0x80000000
#define SDRAM_RFDC_ARSE_DISABLE 0x80000000
#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
#define SDRAM_RFDC_RFOS_MASK 0x007F0000
#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
#define SDRAM_RFDC_RFFD_MASK 0x000003FF
#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
#define SDRAM_RFDC_RFFD_MAX 0x4FF
/*-----------------------------------------------------------------------------+
| SDRAM Delay Line Calibration Register
+-----------------------------------------------------------------------------*/
#define SDRAM_DLCR_DCLM_MASK 0x80000000
#define SDRAM_DLCR_DCLM_MANUEL 0x80000000
#define SDRAM_DLCR_DCLM_AUTO 0x00000000
#define SDRAM_DLCR_DLCR_MASK 0x08000000
#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000
#define SDRAM_DLCR_DLCR_IDLE 0x00000000
#define SDRAM_DLCR_DLCS_MASK 0x07000000
#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000
#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000
#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000
#define SDRAM_DLCR_DLCS_ERROR 0x04000000
#define SDRAM_DLCR_DLCV_MASK 0x000001FF
#define SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
#define SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF)
/*-----------------------------------------------------------------------------+
| SDRAM Controller On Die Termination Register
+-----------------------------------------------------------------------------*/
#define SDRAM_CODT_ODT_ON 0x80000000
#define SDRAM_CODT_ODT_OFF 0x00000000
#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK 0x00000020
#define SDRAM_CODT_DQS_2_5_V_DDR1 0x00000000
#define SDRAM_CODT_DQS_1_8_V_DDR2 0x00000020
#define SDRAM_CODT_DQS_MASK 0x00000010
#define SDRAM_CODT_DQS_DIFFERENTIAL 0x00000000
#define SDRAM_CODT_DQS_SINGLE_END 0x00000010
#define SDRAM_CODT_CKSE_DIFFERENTIAL 0x00000000
#define SDRAM_CODT_CKSE_SINGLE_END 0x00000008
#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004
#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002
#define SDRAM_CODT_IO_HIZ 0x00000000
#define SDRAM_CODT_IO_NMODE 0x00000001
/*-----------------------------------------------------------------------------+
| SDRAM Mode Register
+-----------------------------------------------------------------------------*/
#define SDRAM_MMODE_WR_MASK 0x00000E00
#define SDRAM_MMODE_WR_DDR1 0x00000000
#define SDRAM_MMODE_WR_DDR2_3_CYC 0x00000400
#define SDRAM_MMODE_WR_DDR2_4_CYC 0x00000600
#define SDRAM_MMODE_WR_DDR2_5_CYC 0x00000800
#define SDRAM_MMODE_WR_DDR2_6_CYC 0x00000A00
#define SDRAM_MMODE_DCL_MASK 0x00000070
#define SDRAM_MMODE_DCL_DDR1_2_0_CLK 0x00000020
#define SDRAM_MMODE_DCL_DDR1_2_5_CLK 0x00000060
#define SDRAM_MMODE_DCL_DDR1_3_0_CLK 0x00000030
#define SDRAM_MMODE_DCL_DDR2_2_0_CLK 0x00000020
#define SDRAM_MMODE_DCL_DDR2_3_0_CLK 0x00000030
#define SDRAM_MMODE_DCL_DDR2_4_0_CLK 0x00000040
#define SDRAM_MMODE_DCL_DDR2_5_0_CLK 0x00000050
#define SDRAM_MMODE_DCL_DDR2_6_0_CLK 0x00000060
#define SDRAM_MMODE_DCL_DDR2_7_0_CLK 0x00000070
/*-----------------------------------------------------------------------------+
| SDRAM Extended Mode Register
+-----------------------------------------------------------------------------*/
#define SDRAM_MEMODE_DIC_MASK 0x00000002
#define SDRAM_MEMODE_DIC_NORMAL 0x00000000
#define SDRAM_MEMODE_DIC_WEAK 0x00000002
#define SDRAM_MEMODE_DLL_MASK 0x00000001
#define SDRAM_MEMODE_DLL_DISABLE 0x00000001
#define SDRAM_MEMODE_DLL_ENABLE 0x00000000
#define SDRAM_MEMODE_RTT_MASK 0x00000044
#define SDRAM_MEMODE_RTT_DISABLED 0x00000000
#define SDRAM_MEMODE_RTT_75OHM 0x00000004
#define SDRAM_MEMODE_RTT_150OHM 0x00000040
#define SDRAM_MEMODE_DQS_MASK 0x00000400
#define SDRAM_MEMODE_DQS_DISABLE 0x00000400
#define SDRAM_MEMODE_DQS_ENABLE 0x00000000
/*-----------------------------------------------------------------------------+
| SDRAM Clock Timing Register
+-----------------------------------------------------------------------------*/
#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
/*-----------------------------------------------------------------------------+
| SDRAM Write Timing Register
+-----------------------------------------------------------------------------*/
#define SDRAM_WRDTR_WDTP_1_CYC 0x80000000
#define SDRAM_WRDTR_LLWP_MASK 0x10000000
#define SDRAM_WRDTR_LLWP_DIS 0x10000000
#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
#define SDRAM_WRDTR_WTR_MASK 0x0E000000
#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
/*-----------------------------------------------------------------------------+
| SDRAM SDTR1 Options
+-----------------------------------------------------------------------------*/
#define SDRAM_SDTR1_LDOF_MASK 0x80000000
#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000
#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000
#define SDRAM_SDTR1_RTW_MASK 0x00F00000
#define SDRAM_SDTR1_RTW_2_CLK 0x00200000
#define SDRAM_SDTR1_RTW_3_CLK 0x00300000
#define SDRAM_SDTR1_WTWO_MASK 0x000F0000
#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000
#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000
#define SDRAM_SDTR1_RTRO_MASK 0x0000F000
#define SDRAM_SDTR1_RTRO_1_CLK 0x00000000
#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000
/*-----------------------------------------------------------------------------+
| SDRAM SDTR2 Options
+-----------------------------------------------------------------------------*/
#define SDRAM_SDTR2_RCD_MASK 0xF0000000
#define SDRAM_SDTR2_RCD_1_CLK 0x10000000
#define SDRAM_SDTR2_RCD_2_CLK 0x20000000
#define SDRAM_SDTR2_RCD_3_CLK 0x30000000
#define SDRAM_SDTR2_RCD_4_CLK 0x40000000
#define SDRAM_SDTR2_RCD_5_CLK 0x50000000
#define SDRAM_SDTR2_WTR_MASK 0x0F000000
#define SDRAM_SDTR2_WTR_1_CLK 0x01000000
#define SDRAM_SDTR2_WTR_2_CLK 0x02000000
#define SDRAM_SDTR2_WTR_3_CLK 0x03000000
#define SDRAM_SDTR2_WTR_4_CLK 0x04000000
#define SDRAM_SDTR3_WTR_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000
#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000
#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000
#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000
#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000
#define SDRAM_SDTR2_WPC_MASK 0x0000F000
#define SDRAM_SDTR2_WPC_2_CLK 0x00002000
#define SDRAM_SDTR2_WPC_3_CLK 0x00003000
#define SDRAM_SDTR2_WPC_4_CLK 0x00004000
#define SDRAM_SDTR2_WPC_5_CLK 0x00005000
#define SDRAM_SDTR2_WPC_6_CLK 0x00006000
#define SDRAM_SDTR3_WPC_ENCODE(n) ((((unsigned long)(n))&0xF)<<12)
#define SDRAM_SDTR2_RPC_MASK 0x00000F00
#define SDRAM_SDTR2_RPC_2_CLK 0x00000200
#define SDRAM_SDTR2_RPC_3_CLK 0x00000300
#define SDRAM_SDTR2_RPC_4_CLK 0x00000400
#define SDRAM_SDTR2_RP_MASK 0x000000F0
#define SDRAM_SDTR2_RP_3_CLK 0x00000030
#define SDRAM_SDTR2_RP_4_CLK 0x00000040
#define SDRAM_SDTR2_RP_5_CLK 0x00000050
#define SDRAM_SDTR2_RP_6_CLK 0x00000060
#define SDRAM_SDTR2_RP_7_CLK 0x00000070
#define SDRAM_SDTR2_RRD_MASK 0x0000000F
#define SDRAM_SDTR2_RRD_2_CLK 0x00000002
#define SDRAM_SDTR2_RRD_3_CLK 0x00000003
/*-----------------------------------------------------------------------------+
| SDRAM SDTR3 Options
+-----------------------------------------------------------------------------*/
#define SDRAM_SDTR3_RAS_MASK 0x1F000000
#define SDRAM_SDTR3_RAS_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
#define SDRAM_SDTR3_RC_MASK 0x001F0000
#define SDRAM_SDTR3_RC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
#define SDRAM_SDTR3_XCS_MASK 0x00001F00
#define SDRAM_SDTR3_XCS 0x00000D00
#define SDRAM_SDTR3_RFC_MASK 0x0000003F
#define SDRAM_SDTR3_RFC_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
/*-----------------------------------------------------------------------------+
| Memory Bank 0-1 configuration
+-----------------------------------------------------------------------------*/
#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */
#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */
#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */
#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */
#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */
#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */
#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */
#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */
#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */
#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */
#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */
#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */
#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
#define sdr_uart0 0x0120 /* UART0 Config */
#define sdr_uart1 0x0121 /* UART1 Config */
#define sdr_mfr 0x4300 /* SDR0_MFR reg */
@ -1612,4 +1340,27 @@
#define SDR0_PFC1_GPT_FREQ 0x0000000f
#endif
/* General Purpose Timer (GPT) Register Offsets */
#define GPT0_TBC 0x00000000
#define GPT0_IM 0x00000018
#define GPT0_ISS 0x0000001C
#define GPT0_ISC 0x00000020
#define GPT0_IE 0x00000024
#define GPT0_COMP0 0x00000080
#define GPT0_COMP1 0x00000084
#define GPT0_COMP2 0x00000088
#define GPT0_COMP3 0x0000008C
#define GPT0_COMP4 0x00000090
#define GPT0_COMP5 0x00000094
#define GPT0_COMP6 0x00000098
#define GPT0_MASK0 0x000000C0
#define GPT0_MASK1 0x000000C4
#define GPT0_MASK2 0x000000C8
#define GPT0_MASK3 0x000000CC
#define GPT0_MASK4 0x000000D0
#define GPT0_MASK5 0x000000D4
#define GPT0_MASK6 0x000000D8
#define GPT0_DCT0 0x00000110
#define GPT0_DCIS 0x0000011C
#endif /* __PPC405_H__ */

896
include/ppc440.h
View File

@ -210,36 +210,6 @@
#define sdr_plbtr 0x4200
#define sdr_mfr 0x4300 /* SDR0_MFR reg */
/*-----------------------------------------------------------------------------
| SDRAM Controller
+----------------------------------------------------------------------------*/
/* values for memcfga register - indirect addressing of these regs */
#define mem_besr0_clr 0x0000 /* bus error status reg 0 (clr) */
#define mem_besr0_set 0x0004 /* bus error status reg 0 (set) */
#define mem_besr1_clr 0x0008 /* bus error status reg 1 (clr) */
#define mem_besr1_set 0x000c /* bus error status reg 1 (set) */
#define mem_bear 0x0010 /* bus error address reg */
#define mem_mirq_clr 0x0011 /* bus master interrupt (clr) */
#define mem_mirq_set 0x0012 /* bus master interrupt (set) */
#define mem_slio 0x0018 /* ddr sdram slave interface options */
#define mem_cfg0 0x0020 /* ddr sdram options 0 */
#define mem_cfg1 0x0021 /* ddr sdram options 1 */
#define mem_devopt 0x0022 /* ddr sdram device options */
#define mem_mcsts 0x0024 /* memory controller status */
#define mem_rtr 0x0030 /* refresh timer register */
#define mem_pmit 0x0034 /* power management idle timer */
#define mem_uabba 0x0038 /* plb UABus base address */
#define mem_b0cr 0x0040 /* ddr sdram bank 0 configuration */
#define mem_b1cr 0x0044 /* ddr sdram bank 1 configuration */
#define mem_b2cr 0x0048 /* ddr sdram bank 2 configuration */
#define mem_b3cr 0x004c /* ddr sdram bank 3 configuration */
#define mem_tr0 0x0080 /* sdram timing register 0 */
#define mem_tr1 0x0081 /* sdram timing register 1 */
#define mem_clktr 0x0082 /* ddr clock timing register */
#define mem_wddctr 0x0083 /* write data/dm/dqs clock timing reg */
#define mem_dlycal 0x0084 /* delay line calibration register */
#define mem_eccesr 0x0098 /* ECC error status */
#ifdef CONFIG_440GX
#define sdr_amp 0x0240
#define sdr_xpllc 0x01c1
@ -380,872 +350,6 @@
#define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */
#endif /* CONFIG_440SPE */
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
/*----------------------------------------------------------------------------+
| SDRAM Controller
+----------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------+
| SDRAM DLYCAL Options
+-----------------------------------------------------------------------------*/
#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
/*----------------------------------------------------------------------------+
| Memory queue defines
+----------------------------------------------------------------------------*/
/* A REVOIR versus RWC - SG*/
#define SDRAMQ_DCR_BASE 0x040
#define SDRAM_R0BAS (SDRAMQ_DCR_BASE+0x0) /* rank 0 base address & size */
#define SDRAM_R1BAS (SDRAMQ_DCR_BASE+0x1) /* rank 1 base address & size */
#define SDRAM_R2BAS (SDRAMQ_DCR_BASE+0x2) /* rank 2 base address & size */
#define SDRAM_R3BAS (SDRAMQ_DCR_BASE+0x3) /* rank 3 base address & size */
#define SDRAM_CONF1HB (SDRAMQ_DCR_BASE+0x5) /* configuration 1 HB */
#define SDRAM_ERRSTATHB (SDRAMQ_DCR_BASE+0x7) /* error status HB */
#define SDRAM_ERRADDUHB (SDRAMQ_DCR_BASE+0x8) /* error address upper 32 HB */
#define SDRAM_ERRADDLHB (SDRAMQ_DCR_BASE+0x9) /* error address lower 32 HB */
#define SDRAM_PLBADDULL (SDRAMQ_DCR_BASE+0xA) /* PLB base address upper 32 LL */
#define SDRAM_CONF1LL (SDRAMQ_DCR_BASE+0xB) /* configuration 1 LL */
#define SDRAM_ERRSTATLL (SDRAMQ_DCR_BASE+0xC) /* error status LL */
#define SDRAM_ERRADDULL (SDRAMQ_DCR_BASE+0xD) /* error address upper 32 LL */
#define SDRAM_ERRADDLLL (SDRAMQ_DCR_BASE+0xE) /* error address lower 32 LL */
#define SDRAM_CONFPATHB (SDRAMQ_DCR_BASE+0xF) /* configuration between paths */
#define SDRAM_PLBADDUHB (SDRAMQ_DCR_BASE+0x10) /* PLB base address upper 32 LL */
/*-----------------------------------------------------------------------------+
| Memory Bank 0-7 configuration
+-----------------------------------------------------------------------------*/
#if defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */
#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFFE00000)>>2)
#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFFE00000)<<2)
#endif /* CONFIG_440SPE */
#if defined(CONFIG_440SP)
#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */
#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFF800000))
#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFF800000))
#endif /* CONFIG_440SP */
#define SDRAM_RXBAS_SDSZ_MASK 0x0000FFC0 /* Size */
#define SDRAM_RXBAS_SDSZ_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<6)
#define SDRAM_RXBAS_SDSZ_DECODE(n) ((((unsigned long)(n))>>6)&0x3FF)
#define SDRAM_RXBAS_SDSZ_0 0x00000000 /* 0M */
#define SDRAM_RXBAS_SDSZ_8 0x0000FFC0 /* 8M */
#define SDRAM_RXBAS_SDSZ_16 0x0000FF80 /* 16M */
#define SDRAM_RXBAS_SDSZ_32 0x0000FF00 /* 32M */
#define SDRAM_RXBAS_SDSZ_64 0x0000FE00 /* 64M */
#define SDRAM_RXBAS_SDSZ_128 0x0000FC00 /* 128M */
#define SDRAM_RXBAS_SDSZ_256 0x0000F800 /* 256M */
#define SDRAM_RXBAS_SDSZ_512 0x0000F000 /* 512M */
#define SDRAM_RXBAS_SDSZ_1024 0x0000E000 /* 1024M */
#define SDRAM_RXBAS_SDSZ_2048 0x0000C000 /* 2048M */
#define SDRAM_RXBAS_SDSZ_4096 0x00008000 /* 4096M */
/*----------------------------------------------------------------------------+
| Memory controller defines
+----------------------------------------------------------------------------*/
/* A REVOIR versus specs 4 bank - SG*/
#define SDRAM_MCSTAT 0x14 /* memory controller status */
#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */
#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */
#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */
#define SDRAM_CODT 0x26 /* on die termination for controller */
#define SDRAM_VVPR 0x27 /* variable VRef programmming */
#define SDRAM_OPARS 0x28 /* on chip driver control setup */
#define SDRAM_OPART 0x29 /* on chip driver control trigger */
#define SDRAM_RTR 0x30 /* refresh timer */
#define SDRAM_PMIT 0x34 /* power management idle timer */
#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */
#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */
#define SDRAM_MB2CF 0x48
#define SDRAM_MB3CF 0x4C
#define SDRAM_INITPLR0 0x50 /* manual initialization control */
#define SDRAM_INITPLR1 0x51 /* manual initialization control */
#define SDRAM_INITPLR2 0x52 /* manual initialization control */
#define SDRAM_INITPLR3 0x53 /* manual initialization control */
#define SDRAM_INITPLR4 0x54 /* manual initialization control */
#define SDRAM_INITPLR5 0x55 /* manual initialization control */
#define SDRAM_INITPLR6 0x56 /* manual initialization control */
#define SDRAM_INITPLR7 0x57 /* manual initialization control */
#define SDRAM_INITPLR8 0x58 /* manual initialization control */
#define SDRAM_INITPLR9 0x59 /* manual initialization control */
#define SDRAM_INITPLR10 0x5a /* manual initialization control */
#define SDRAM_INITPLR11 0x5b /* manual initialization control */
#define SDRAM_INITPLR12 0x5c /* manual initialization control */
#define SDRAM_INITPLR13 0x5d /* manual initialization control */
#define SDRAM_INITPLR14 0x5e /* manual initialization control */
#define SDRAM_INITPLR15 0x5f /* manual initialization control */
#define SDRAM_RQDC 0x70 /* read DQS delay control */
#define SDRAM_RFDC 0x74 /* read feedback delay control */
#define SDRAM_RDCC 0x78 /* read data capture control */
#define SDRAM_DLCR 0x7A /* delay line calibration */
#define SDRAM_CLKTR 0x80 /* DDR clock timing */
#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */
#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */
#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */
#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */
#define SDRAM_MMODE 0x88 /* memory mode */
#define SDRAM_MEMODE 0x89 /* memory extended mode */
#define SDRAM_ECCCR 0x98 /* ECC error status */
#define SDRAM_CID 0xA4 /* core ID */
#define SDRAM_RID 0xA8 /* revision ID */
#define SDRAM_RTSR 0xB1 /* run time status tracking */
/*-----------------------------------------------------------------------------+
| Memory Controller Status
+-----------------------------------------------------------------------------*/
#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
#define SDRAM_MCSTAT_SRMS_MASK 0x40000000 /* Mem self refresh stat mask */
#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
#define SDRAM_MCSTAT_SRMS_SF 0x40000000 /* Mem in self refresh */
#define SDRAM_MCSTAT_IDLE_MASK 0x20000000 /* Mem self refresh stat mask */
#define SDRAM_MCSTAT_IDLE_NOT 0x00000000 /* Mem contr not idle */
#define SDRAM_MCSTAT_IDLE 0x20000000 /* Mem contr idle */
/*-----------------------------------------------------------------------------+
| Memory Controller Options 1
+-----------------------------------------------------------------------------*/
#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask*/
#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */
#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */
#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */
#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/
#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((unsigned long)(n))>>28)&0x3)
#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */
#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */
#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */
#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */
#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */
#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */
#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */
#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */
#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */
#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */
#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */
#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */
#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */
#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */
#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */
#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */
#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */
#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */
#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */
#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */
#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */
#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */
#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */
#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */
#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */
#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */
#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */
#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */
#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */
/*-----------------------------------------------------------------------------+
| Memory Controller Options 2
+-----------------------------------------------------------------------------*/
#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */
#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */
#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */
#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */
#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */
#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */
#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */
#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */
#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */
#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */
#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */
#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */
#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */
#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */
#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */
#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/
#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */
#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */
/*-----------------------------------------------------------------------------+
| SDRAM Refresh Timer Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RTR_RINT_MASK 0xFFF80000
#define SDRAM_RTR_RINT_ENCODE(n) ((((unsigned long)(n))&0xFFF8)<<16)
#define SDRAM_RTR_RINT_DECODE(n) ((((unsigned long)(n))>>16)&0xFFF8)
/*-----------------------------------------------------------------------------+
| SDRAM Read DQS Delay Control Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RQDC_RQDE_MASK 0x80000000
#define SDRAM_RQDC_RQDE_DISABLE 0x00000000
#define SDRAM_RQDC_RQDE_ENABLE 0x80000000
#define SDRAM_RQDC_RQFD_MASK 0x000001FF
#define SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
#define SDRAM_RQDC_RQFD_MAX 0x1FF
/*-----------------------------------------------------------------------------+
| SDRAM Read Data Capture Control Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RDCC_RDSS_MASK 0xC0000000
#define SDRAM_RDCC_RDSS_T1 0x00000000
#define SDRAM_RDCC_RDSS_T2 0x40000000
#define SDRAM_RDCC_RDSS_T3 0x80000000
#define SDRAM_RDCC_RDSS_T4 0xC0000000
#define SDRAM_RDCC_RSAE_MASK 0x00000001
#define SDRAM_RDCC_RSAE_DISABLE 0x00000001
#define SDRAM_RDCC_RSAE_ENABLE 0x00000000
/*-----------------------------------------------------------------------------+
| SDRAM Read Feedback Delay Control Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RFDC_ARSE_MASK 0x80000000
#define SDRAM_RFDC_ARSE_DISABLE 0x80000000
#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
#define SDRAM_RFDC_RFOS_MASK 0x007F0000
#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
#define SDRAM_RFDC_RFFD_MASK 0x000007FF
#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x7FF)<<0)
#define SDRAM_RFDC_RFFD_MAX 0x7FF
/*-----------------------------------------------------------------------------+
| SDRAM Delay Line Calibration Register
+-----------------------------------------------------------------------------*/
#define SDRAM_DLCR_DCLM_MASK 0x80000000
#define SDRAM_DLCR_DCLM_MANUEL 0x80000000
#define SDRAM_DLCR_DCLM_AUTO 0x00000000
#define SDRAM_DLCR_DLCR_MASK 0x08000000
#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000
#define SDRAM_DLCR_DLCR_IDLE 0x00000000
#define SDRAM_DLCR_DLCS_MASK 0x07000000
#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000
#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000
#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000
#define SDRAM_DLCR_DLCS_ERROR 0x04000000
#define SDRAM_DLCR_DLCV_MASK 0x000001FF
#define SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
#define SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF)
/*-----------------------------------------------------------------------------+
| SDRAM Controller On Die Termination Register
+-----------------------------------------------------------------------------*/
#define SDRAM_CODT_ODT_ON 0x80000000
#define SDRAM_CODT_ODT_OFF 0x00000000
#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK 0x00000020
#define SDRAM_CODT_DQS_2_5_V_DDR1 0x00000000
#define SDRAM_CODT_DQS_1_8_V_DDR2 0x00000020
#define SDRAM_CODT_DQS_MASK 0x00000010
#define SDRAM_CODT_DQS_DIFFERENTIAL 0x00000000
#define SDRAM_CODT_DQS_SINGLE_END 0x00000010
#define SDRAM_CODT_CKSE_DIFFERENTIAL 0x00000000
#define SDRAM_CODT_CKSE_SINGLE_END 0x00000008
#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004
#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002
#define SDRAM_CODT_IO_HIZ 0x00000000
#define SDRAM_CODT_IO_NMODE 0x00000001
/*-----------------------------------------------------------------------------+
| SDRAM Mode Register
+-----------------------------------------------------------------------------*/
#define SDRAM_MMODE_WR_MASK 0x00000E00
#define SDRAM_MMODE_WR_DDR1 0x00000000
#define SDRAM_MMODE_WR_DDR2_3_CYC 0x00000400
#define SDRAM_MMODE_WR_DDR2_4_CYC 0x00000600
#define SDRAM_MMODE_WR_DDR2_5_CYC 0x00000800
#define SDRAM_MMODE_WR_DDR2_6_CYC 0x00000A00
#define SDRAM_MMODE_DCL_MASK 0x00000070
#define SDRAM_MMODE_DCL_DDR1_2_0_CLK 0x00000020
#define SDRAM_MMODE_DCL_DDR1_2_5_CLK 0x00000060
#define SDRAM_MMODE_DCL_DDR1_3_0_CLK 0x00000030
#define SDRAM_MMODE_DCL_DDR2_2_0_CLK 0x00000020
#define SDRAM_MMODE_DCL_DDR2_3_0_CLK 0x00000030
#define SDRAM_MMODE_DCL_DDR2_4_0_CLK 0x00000040
#define SDRAM_MMODE_DCL_DDR2_5_0_CLK 0x00000050
#define SDRAM_MMODE_DCL_DDR2_6_0_CLK 0x00000060
#define SDRAM_MMODE_DCL_DDR2_7_0_CLK 0x00000070
/*-----------------------------------------------------------------------------+
| SDRAM Extended Mode Register
+-----------------------------------------------------------------------------*/
#define SDRAM_MEMODE_DIC_MASK 0x00000002
#define SDRAM_MEMODE_DIC_NORMAL 0x00000000
#define SDRAM_MEMODE_DIC_WEAK 0x00000002
#define SDRAM_MEMODE_DLL_MASK 0x00000001
#define SDRAM_MEMODE_DLL_DISABLE 0x00000001
#define SDRAM_MEMODE_DLL_ENABLE 0x00000000
#define SDRAM_MEMODE_RTT_MASK 0x00000044
#define SDRAM_MEMODE_RTT_DISABLED 0x00000000
#define SDRAM_MEMODE_RTT_75OHM 0x00000004
#define SDRAM_MEMODE_RTT_150OHM 0x00000040
#define SDRAM_MEMODE_DQS_MASK 0x00000400
#define SDRAM_MEMODE_DQS_DISABLE 0x00000400
#define SDRAM_MEMODE_DQS_ENABLE 0x00000000
/*-----------------------------------------------------------------------------+
| SDRAM Clock Timing Register
+-----------------------------------------------------------------------------*/
#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
#define SDRAM_CLKTR_CLKP_90_DEG_ADV 0x40000000
#define SDRAM_CLKTR_CLKP_270_DEG_ADV 0xC0000000
/*-----------------------------------------------------------------------------+
| SDRAM Write Timing Register
+-----------------------------------------------------------------------------*/
#define SDRAM_WRDTR_LLWP_MASK 0x10000000
#define SDRAM_WRDTR_LLWP_DIS 0x10000000
#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
#define SDRAM_WRDTR_WTR_MASK 0x0E000000
#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
#define SDRAM_WRDTR_WTR_90_DEG_ADV 0x04000000
#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
/*-----------------------------------------------------------------------------+
| SDRAM SDTR1 Options
+-----------------------------------------------------------------------------*/
#define SDRAM_SDTR1_LDOF_MASK 0x80000000
#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000
#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000
#define SDRAM_SDTR1_RTW_MASK 0x00F00000
#define SDRAM_SDTR1_RTW_2_CLK 0x00200000
#define SDRAM_SDTR1_RTW_3_CLK 0x00300000
#define SDRAM_SDTR1_WTWO_MASK 0x000F0000
#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000
#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000
#define SDRAM_SDTR1_RTRO_MASK 0x0000F000
#define SDRAM_SDTR1_RTRO_1_CLK 0x00001000
#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000
/*-----------------------------------------------------------------------------+
| SDRAM SDTR2 Options
+-----------------------------------------------------------------------------*/
#define SDRAM_SDTR2_RCD_MASK 0xF0000000
#define SDRAM_SDTR2_RCD_1_CLK 0x10000000
#define SDRAM_SDTR2_RCD_2_CLK 0x20000000
#define SDRAM_SDTR2_RCD_3_CLK 0x30000000
#define SDRAM_SDTR2_RCD_4_CLK 0x40000000
#define SDRAM_SDTR2_RCD_5_CLK 0x50000000
#define SDRAM_SDTR2_WTR_MASK 0x0F000000
#define SDRAM_SDTR2_WTR_1_CLK 0x01000000
#define SDRAM_SDTR2_WTR_2_CLK 0x02000000
#define SDRAM_SDTR2_WTR_3_CLK 0x03000000
#define SDRAM_SDTR2_WTR_4_CLK 0x04000000
#define SDRAM_SDTR3_WTR_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000
#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000
#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000
#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000
#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000
#define SDRAM_SDTR2_WPC_MASK 0x0000F000
#define SDRAM_SDTR2_WPC_2_CLK 0x00002000
#define SDRAM_SDTR2_WPC_3_CLK 0x00003000
#define SDRAM_SDTR2_WPC_4_CLK 0x00004000
#define SDRAM_SDTR2_WPC_5_CLK 0x00005000
#define SDRAM_SDTR2_WPC_6_CLK 0x00006000
#define SDRAM_SDTR3_WPC_ENCODE(n) ((((unsigned long)(n))&0xF)<<12)
#define SDRAM_SDTR2_RPC_MASK 0x00000F00
#define SDRAM_SDTR2_RPC_2_CLK 0x00000200
#define SDRAM_SDTR2_RPC_3_CLK 0x00000300
#define SDRAM_SDTR2_RPC_4_CLK 0x00000400
#define SDRAM_SDTR2_RP_MASK 0x000000F0
#define SDRAM_SDTR2_RP_3_CLK 0x00000030
#define SDRAM_SDTR2_RP_4_CLK 0x00000040
#define SDRAM_SDTR2_RP_5_CLK 0x00000050
#define SDRAM_SDTR2_RP_6_CLK 0x00000060
#define SDRAM_SDTR2_RP_7_CLK 0x00000070
#define SDRAM_SDTR2_RRD_MASK 0x0000000F
#define SDRAM_SDTR2_RRD_2_CLK 0x00000002
#define SDRAM_SDTR2_RRD_3_CLK 0x00000003
/*-----------------------------------------------------------------------------+
| SDRAM SDTR3 Options
+-----------------------------------------------------------------------------*/
#define SDRAM_SDTR3_RAS_MASK 0x1F000000
#define SDRAM_SDTR3_RAS_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
#define SDRAM_SDTR3_RC_MASK 0x001F0000
#define SDRAM_SDTR3_RC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
#define SDRAM_SDTR3_XCS_MASK 0x00001F00
#define SDRAM_SDTR3_XCS 0x00000D00
#define SDRAM_SDTR3_RFC_MASK 0x0000003F
#define SDRAM_SDTR3_RFC_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
/*-----------------------------------------------------------------------------+
| Memory Bank 0-1 configuration
+-----------------------------------------------------------------------------*/
#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */
#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */
#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */
#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */
#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */
#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */
#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */
#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */
#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */
#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */
#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */
#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */
#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
#define SDRAM_RTSR_TRK1SM_MASK 0xC0000000 /* Tracking State Mach 1*/
#define SDRAM_RTSR_TRK1SM_ATBASE 0x00000000 /* atbase state */
#define SDRAM_RTSR_TRK1SM_MISSED 0x40000000 /* missed state */
#define SDRAM_RTSR_TRK1SM_ATPLS1 0x80000000 /* atpls1 state */
#define SDRAM_RTSR_TRK1SM_RESET 0xC0000000 /* reset state */
#define SDR0_MFR_FIXD 0x10000000 /* Workaround for PCI/DMA */
#endif /* CONFIG_440SPE */
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/*-----------------------------------------------------------------------------
| SDRAM Controller
+----------------------------------------------------------------------------*/
#define DDR0_00 0x00
#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */
#define DDR0_00_INT_ACK_ALL 0x7F000000
#define DDR0_00_INT_ACK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
#define DDR0_00_INT_ACK_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
/* Status */
#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */
/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
#define DDR0_00_INT_STATUS_BIT0 0x00010000
/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
#define DDR0_00_INT_STATUS_BIT1 0x00020000
/* Bit2. Single correctable ECC event detected */
#define DDR0_00_INT_STATUS_BIT2 0x00040000
/* Bit3. Multiple correctable ECC events detected. */
#define DDR0_00_INT_STATUS_BIT3 0x00080000
/* Bit4. Single uncorrectable ECC event detected. */
#define DDR0_00_INT_STATUS_BIT4 0x00100000
/* Bit5. Multiple uncorrectable ECC events detected. */
#define DDR0_00_INT_STATUS_BIT5 0x00200000
/* Bit6. DRAM initialization complete. */
#define DDR0_00_INT_STATUS_BIT6 0x00400000
/* Bit7. Logical OR of all lower bits. */
#define DDR0_00_INT_STATUS_BIT7 0x00800000
#define DDR0_00_INT_STATUS_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
#define DDR0_00_INT_STATUS_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00
#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
#define DDR0_00_DLL_START_POINT_MASK 0x0000007F
#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
#define DDR0_00_DLL_START_POINT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
#define DDR0_01 0x01
#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000
#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000
#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */
#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
#define DDR0_01_INT_MASK_MASK 0x000000FF
#define DDR0_01_INT_MASK_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
#define DDR0_01_INT_MASK_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
#define DDR0_01_INT_MASK_ALL_ON 0x000000FF
#define DDR0_01_INT_MASK_ALL_OFF 0x00000000
#define DDR0_02 0x02
#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */
#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((unsigned long)(n))&0x2)<<24)
#define DDR0_02_MAX_CS_REG_DECODE(n) ((((unsigned long)(n))>>24)&0x2)
#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */
#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
#define DDR0_02_MAX_COL_REG_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */
#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
#define DDR0_02_START_MASK 0x00000001
#define DDR0_02_START_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
#define DDR0_02_START_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
#define DDR0_02_START_OFF 0x00000000
#define DDR0_02_START_ON 0x00000001
#define DDR0_03 0x03
#define DDR0_03_BSTLEN_MASK 0x07000000
#define DDR0_03_BSTLEN_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
#define DDR0_03_BSTLEN_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
#define DDR0_03_CASLAT_MASK 0x00070000
#define DDR0_03_CASLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
#define DDR0_03_CASLAT_LIN_MASK 0x00000F00
#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
#define DDR0_03_CASLAT_LIN_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
#define DDR0_03_INITAREF_MASK 0x0000000F
#define DDR0_03_INITAREF_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
#define DDR0_03_INITAREF_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
#define DDR0_04 0x04
#define DDR0_04_TRC_MASK 0x1F000000
#define DDR0_04_TRC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
#define DDR0_04_TRC_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
#define DDR0_04_TRRD_MASK 0x00070000
#define DDR0_04_TRRD_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
#define DDR0_04_TRRD_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
#define DDR0_04_TRTP_MASK 0x00000700
#define DDR0_04_TRTP_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
#define DDR0_04_TRTP_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
#define DDR0_05 0x05
#define DDR0_05_TMRD_MASK 0x1F000000
#define DDR0_05_TMRD_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
#define DDR0_05_TMRD_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
#define DDR0_05_TEMRS_MASK 0x00070000
#define DDR0_05_TEMRS_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
#define DDR0_05_TEMRS_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
#define DDR0_05_TRP_MASK 0x00000F00
#define DDR0_05_TRP_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
#define DDR0_05_TRP_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
#define DDR0_05_TRAS_MIN_MASK 0x000000FF
#define DDR0_05_TRAS_MIN_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
#define DDR0_05_TRAS_MIN_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
#define DDR0_06 0x06
#define DDR0_06_WRITEINTERP_MASK 0x01000000
#define DDR0_06_WRITEINTERP_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
#define DDR0_06_WRITEINTERP_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
#define DDR0_06_TWTR_MASK 0x00070000
#define DDR0_06_TWTR_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
#define DDR0_06_TWTR_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
#define DDR0_06_TDLL_MASK 0x0000FF00
#define DDR0_06_TDLL_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
#define DDR0_06_TDLL_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
#define DDR0_06_TRFC_MASK 0x0000007F
#define DDR0_06_TRFC_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
#define DDR0_06_TRFC_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
#define DDR0_07 0x07
#define DDR0_07_NO_CMD_INIT_MASK 0x01000000
#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
#define DDR0_07_TFAW_MASK 0x001F0000
#define DDR0_07_TFAW_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
#define DDR0_07_TFAW_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100
#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
#define DDR0_07_AREFRESH_MASK 0x00000001
#define DDR0_07_AREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
#define DDR0_07_AREFRESH_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
#define DDR0_08 0x08
#define DDR0_08_WRLAT_MASK 0x07000000
#define DDR0_08_WRLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
#define DDR0_08_WRLAT_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
#define DDR0_08_TCPD_MASK 0x00FF0000
#define DDR0_08_TCPD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
#define DDR0_08_TCPD_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
#define DDR0_08_DQS_N_EN_MASK 0x00000100
#define DDR0_08_DQS_N_EN_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
#define DDR0_08_DQS_N_EN_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001
#define DDR0_08_DDRII_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
#define DDR0_08_DDRII_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
#define DDR0_09 0x09
#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000
#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
#define DDR0_09_RTT_0_MASK 0x00030000
#define DDR0_09_RTT_0_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
#define DDR0_09_RTT_0_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00
#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F
#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
#define DDR0_10 0x0A
#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */
#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
#define DDR0_10_CS_MAP_MASK 0x00000300
#define DDR0_10_CS_MAP_NO_MEM 0x00000000
#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100
#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200
#define DDR0_10_CS_MAP_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
#define DDR0_10_CS_MAP_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F
#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
#define DDR0_11 0x0B
#define DDR0_11_SREFRESH_MASK 0x01000000
#define DDR0_11_SREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
#define DDR0_11_SREFRESH_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
#define DDR0_11_TXSNR_MASK 0x00FF0000
#define DDR0_11_TXSNR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
#define DDR0_11_TXSNR_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
#define DDR0_11_TXSR_MASK 0x0000FF00
#define DDR0_11_TXSR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
#define DDR0_11_TXSR_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
#define DDR0_12 0x0C
#define DDR0_12_TCKE_MASK 0x0000007
#define DDR0_12_TCKE_ENCODE(n) ((((unsigned long)(n))&0x7)<<0)
#define DDR0_12_TCKE_DECODE(n) ((((unsigned long)(n))>>0)&0x7)
#define DDR0_14 0x0E
#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000
#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
#define DDR0_14_REDUC_MASK 0x00010000
#define DDR0_14_REDUC_64BITS 0x00000000
#define DDR0_14_REDUC_32BITS 0x00010000
#define DDR0_14_REDUC_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
#define DDR0_14_REDUC_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100
#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
#define DDR0_17 0x11
#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000
#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */
#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000
#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000
#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
#define DDR0_17_DLLLOCKREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */
#define DDR0_17_DLL_LOCK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
#define DDR0_17_DLL_LOCK_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
#define DDR0_18 0x12
#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000
#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000
#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00
#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F
#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
#define DDR0_19 0x13
#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000
#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000
#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00
#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F
#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
#define DDR0_20 0x14
#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000
#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000
#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00
#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F
#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
#define DDR0_21 0x15
#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000
#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000
#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00
#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F
#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
#define DDR0_22 0x16
#define DDR0_22_CTRL_RAW_MASK 0x03000000
#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not being used */
#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC checking is on, but no attempts to correct */
#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* No ECC RAM storage available */
#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC checking and correcting on */
#define DDR0_22_CTRL_RAW_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
#define DDR0_22_CTRL_RAW_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00
#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F
#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
#define DDR0_23 0x17
#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000
#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */
#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
#define DDR0_23_ECC_C_SYND_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */
#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
#define DDR0_23_ECC_U_SYND_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
#define DDR0_23_FWC_MASK 0x00000001 /* Write only */
#define DDR0_23_FWC_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
#define DDR0_23_FWC_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
#define DDR0_24 0x18
#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000
#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000
#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300
#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003
#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<0)
#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>0)&0x3)
#define DDR0_25 0x19
#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */
#define DDR0_25_VERSION_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
#define DDR0_25_VERSION_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */
#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
#define DDR0_26 0x1A
#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000
#define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
#define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
#define DDR0_26_TREF_MASK 0x00003FFF
#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0)
#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF)
#define DDR0_27 0x1B
#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000
#define DDR0_27_EMRS_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
#define DDR0_27_EMRS_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
#define DDR0_27_TINIT_MASK 0x0000FFFF
#define DDR0_27_TINIT_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
#define DDR0_27_TINIT_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
#define DDR0_28 0x1C
#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000
#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
#define DDR0_28_EMRS3_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF
#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0)
#define DDR0_28_EMRS2_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF)
#define DDR0_31 0x1F
#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF
#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
#define DDR0_32 0x20
#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */
#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
#define DDR0_33 0x21
#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */
#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
#define DDR0_34 0x22
#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */
#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
#define DDR0_35 0x23
#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */
#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
#define DDR0_36 0x24
#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
#define DDR0_36_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
#define DDR0_37 0x25
#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
#define DDR0_37_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
#define DDR0_38 0x26
#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */
#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
#define DDR0_39 0x27
#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */
#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
#define DDR0_40 0x28
#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
#define DDR0_40_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
#define DDR0_41 0x29
#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
#define DDR0_41_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
#define DDR0_42 0x2A
#define DDR0_42_ADDR_PINS_MASK 0x07000000
#define DDR0_42_ADDR_PINS_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
#define DDR0_42_ADDR_PINS_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F
#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
#define DDR0_43 0x2B
#define DDR0_43_TWR_MASK 0x07000000
#define DDR0_43_TWR_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
#define DDR0_43_TWR_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
#define DDR0_43_APREBIT_MASK 0x000F0000
#define DDR0_43_APREBIT_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
#define DDR0_43_APREBIT_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
#define DDR0_43_COLUMN_SIZE_MASK 0x00000700
#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001
#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001
#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000
#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
#define DDR0_44 0x2C
#define DDR0_44_TRCD_MASK 0x000000FF
#define DDR0_44_TRCD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
#define DDR0_44_TRCD_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
#endif /* CONFIG_440EPX */
/*-----------------------------------------------------------------------------
| External Bus Controller
+----------------------------------------------------------------------------*/

40
include/ppc4xx.h
View File

@ -22,12 +22,52 @@
#ifndef __PPC4XX_H__
#define __PPC4XX_H__
/*
* Configure which SDRAM/DDR/DDR2 controller is equipped
*/
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP) || \
defined(CONFIG_AP1000) || defined(CONFIG_ML2)
#define CONFIG_SDRAM_PPC4xx_IBM_SDRAM /* IBM SDRAM controller */
#endif
#if defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define CONFIG_SDRAM_PPC4xx_IBM_DDR /* IBM DDR controller */
#endif
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define CONFIG_SDRAM_PPC4xx_DENALI_DDR2 /* Denali DDR(2) controller */
#endif
#if defined(CONFIG_405EX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
#endif
#if defined(CONFIG_440)
#include <ppc440.h>
#else
#include <ppc405.h>
#endif
#include <asm/ppc4xx-sdram.h>
/*
* Macro for generating register field mnemonics
*/
#define PPC_REG_BITS 32
#define PPC_REG_VAL(bit, value) ((value) << ((PPC_REG_BITS - 1) - (bit)))
/*
* Elide casts when assembling register mnemonics
*/
#ifndef __ASSEMBLY__
#define static_cast(type, val) (type)(val)
#else
#define static_cast(type, val) (val)
#endif
/*
* Common stuff for 4xx (405 and 440)
*/

2
nand_spl/board/amcc/acadia/Makefile
View File

@ -51,7 +51,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS)
cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl

2
nand_spl/board/amcc/bamboo/Makefile
View File

@ -50,7 +50,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS)
cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl

10
nand_spl/board/amcc/bamboo/sdram.c
View File

@ -36,7 +36,7 @@ static void wait_init_complete(void)
}
/*
* early_sdram_init()
* long int initdram(int board_type)
*
* As the name already indicates, this function is called very early
* from start.S and configures the SDRAM with fixed values. This is needed,
@ -51,7 +51,7 @@ static void wait_init_complete(void)
* modules are still plugged in. So it is recommended to remove the DIMM
* modules while using the NAND booting code with the fixed SDRAM setup!
*/
void early_sdram_init(void)
long int initdram(int board_type)
{
/*
* Soft-reset SDRAM controller.
@ -87,12 +87,6 @@ void early_sdram_init(void)
*/
mtsdram(mem_cfg0, 0x80000000); /* DCEN=1, PMUD=0*/
wait_init_complete();
}
long int initdram(int board_type)
{
/*
* Nothing to do here, just return size of fixed SDRAM setup
*/
return CFG_MBYTES_SDRAM << 20;
}

2
nand_spl/board/amcc/canyonlands/Makefile
View File

@ -55,7 +55,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS)
cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl

23
nand_spl/board/amcc/kilauea/Makefile
View File

@ -29,8 +29,8 @@ LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
SOBJS = start.o init.o resetvec.o cache.o
COBJS = memory.o nand_boot.o nand_ecc.o ndfc.o
SOBJS = start.o resetvec.o cache.o
COBJS = 44x_spd_ddr2.o nand_boot.o nand_ecc.o ndfc.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
@ -50,17 +50,25 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS)
cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
# create symbolic links for common files
# from cpu directory
$(obj)44x_spd_ddr2.c: ecc.h
@rm -f $(obj)44x_spd_ddr2.c
ln -s $(SRCTREE)/cpu/ppc4xx/44x_spd_ddr2.c $(obj)44x_spd_ddr2.c
$(obj)cache.S:
@rm -f $(obj)cache.S
ln -s $(SRCTREE)/cpu/ppc4xx/cache.S $(obj)cache.S
$(obj)ecc.h:
@rm -f $(obj)ecc.h
ln -s $(SRCTREE)/cpu/ppc4xx/ecc.h $(obj)ecc.h
$(obj)ndfc.c:
@rm -f $(obj)ndfc.c
ln -s $(SRCTREE)/cpu/ppc4xx/ndfc.c $(obj)ndfc.c
@ -73,15 +81,6 @@ $(obj)start.S:
@rm -f $(obj)start.S
ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S
# from board directory
$(obj)init.S:
@rm -f $(obj)init.S
ln -s $(SRCTREE)/board/amcc/kilauea/init.S $(obj)init.S
$(obj)memory.c:
@rm -f $(obj)memory.c
ln -s $(SRCTREE)/board/amcc/kilauea/memory.c $(obj)memory.c
# from nand_spl directory
$(obj)nand_boot.c:
@rm -f $(obj)nand_boot.c

5
nand_spl/board/amcc/kilauea/config.mk
View File

@ -29,8 +29,9 @@
#
# On 4xx platforms the SPL is located at 0xfffff000...0xffffffff,
# in the last 4kBytes of memory space in cache.
# We will copy this SPL into instruction-cache in start.S. So we set
# TEXT_BASE to starting address in i-cache here.
# We will copy this SPL into SDRAM since we can't access the NAND
# controller at CS0 while running from this location. So we set
# TEXT_BASE to starting address in SDRAM here.
#
TEXT_BASE = 0x00800000

1
nand_spl/board/amcc/kilauea/u-boot.lds
View File

@ -32,7 +32,6 @@ SECTIONS
.text :
{
start.o (.text)
init.o (.text)
nand_boot.o (.text)
ndfc.o (.text)

2
nand_spl/board/amcc/sequoia/Makefile
View File

@ -50,7 +50,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(nandobj)u-boot-spl: $(OBJS)
cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl

11
nand_spl/nand_boot.c
View File

@ -221,19 +221,18 @@ static int nand_load(struct mtd_info *mtd, int offs, int uboot_size, uchar *dst)
return 0;
}
/*
* The main entry for NAND booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
* from NAND into SDRAM and starts it from there.
*/
void nand_boot(void)
{
ulong mem_size;
struct nand_chip nand_chip;
nand_info_t nand_info;
int ret;
void (*uboot)(void);
/*
* Init sdram, so we have access to memory
*/
mem_size = initdram(0);
/*
* Init board specific nand support
*/

10
post/cpu/ppc4xx/uart.c
View File

@ -79,13 +79,13 @@
#define UDIV_SUBTRACT 0
#define UART0_SDR sdr_uart0
#define UART1_SDR sdr_uart1
#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPe)
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define UART2_SDR sdr_uart2
#endif
#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
defined(CONFIG_440GR) || defined(CONFIG_440GRx)
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
defined(CONFIG_440GR) || defined(CONFIG_440GRX)
#define UART3_SDR sdr_uart3
#endif
#define MFREG(a, d) mfsdr(a, d)