leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

Browse Source
This commit is contained in:
Tom Rini 2013-02-18 09:57:06 -05:00
commit 1671ba7c0d
15 changed files with 226 additions and 79 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
board/keymile/common/common.c
View File

@ -38,9 +38,7 @@
#include "post.h"
#endif
#include "common.h"
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
#include <i2c.h>
#endif
#if !defined(CONFIG_MPC83xx)
static void i2c_write_start_seq(void);
@ -185,17 +183,6 @@ void i2c_init_board(void)
}
#endif
#if !defined(MACH_TYPE_KM_KIRKWOOD)
int ethernet_present(void)
{
struct km_bec_fpga *base =
(struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
return in_8(&base->bprth) & PIGGY_PRESENT;
}
#endif
int board_eth_init(bd_t *bis)
{
if (ethernet_present())

48
board/keymile/common/ivm.c
View File

@ -201,6 +201,22 @@ static int ivm_check_crc(unsigned char *buf, int block)
return 0;
}
static int calculate_mac_offset(unsigned char *valbuf, unsigned char *buf,
int offset)
{
unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6];
if (offset == 0)
return 0;
val += offset;
buf[4] = (val >> 16) & 0xff;
buf[5] = (val >> 8) & 0xff;
buf[6] = val & 0xff;
sprintf((char *)valbuf, "%pM", buf + 1);
return 0;
}
static int ivm_analyze_block2(unsigned char *buf, int len)
{
unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
@ -210,24 +226,20 @@ static int ivm_analyze_block2(unsigned char *buf, int len)
sprintf((char *)valbuf, "%pM", buf + 1);
ivm_set_value("IVM_MacAddress", (char *)valbuf);
/* if an offset is defined, add it */
#if defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET)
if (CONFIG_PIGGY_MAC_ADRESS_OFFSET > 0) {
unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6];
val += CONFIG_PIGGY_MAC_ADRESS_OFFSET;
buf[4] = (val >> 16) & 0xff;
buf[5] = (val >> 8) & 0xff;
buf[6] = val & 0xff;
sprintf((char *)valbuf, "%pM", buf + 1);
}
#endif
calculate_mac_offset(buf, valbuf, CONFIG_PIGGY_MAC_ADRESS_OFFSET);
#ifdef MACH_TYPE_KM_KIRKWOOD
setenv((char *)"ethaddr", (char *)valbuf);
#else
if (getenv("ethaddr") == NULL)
setenv((char *)"ethaddr", (char *)valbuf);
#endif
#ifdef CONFIG_KMVECT1
/* KMVECT1 has two ethernet interfaces */
if (getenv("eth1addr") == NULL) {
calculate_mac_offset(buf, valbuf, 1);
setenv((char *)"eth1addr", (char *)valbuf);
}
#endif
/* IVM_MacCount */
count = (buf[10] << 24) +
(buf[11] << 16) +
@ -312,27 +324,15 @@ int ivm_read_eeprom(void)
#if defined(CONFIG_I2C_MUX)
/* First init the Bus, select the Bus */
#if defined(CONFIG_SYS_I2C_IVM_BUS)
dev = i2c_mux_ident_muxstring((uchar *)CONFIG_SYS_I2C_IVM_BUS);
#else
buf = (unsigned char *) getenv("EEprom_ivm");
if (buf != NULL)
dev = i2c_mux_ident_muxstring(buf);
#endif
if (dev == NULL) {
printf("Error couldnt add Bus for IVM\n");
return -1;
}
i2c_set_bus_num(dev->busid);
#endif
buf = (unsigned char *) getenv("EEprom_ivm_addr");
if (buf != NULL) {
ret = strict_strtoul((char *)buf, 16, &dev_addr);
if (ret != 0)
return -3;
}
/* add deblocking here */
i2c_make_abort();

8
board/keymile/km82xx/km82xx.c
View File

@ -385,6 +385,14 @@ void handle_mgcoge3un_reset(void)
}
#endif
int ethernet_present(void)
{
struct km_bec_fpga *base =
(struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
return in_8(&base->bprth) & PIGGY_PRESENT;
}
/*
* Early board initalization.
*/

103
board/keymile/km83xx/km83xx.c
View File

@ -98,17 +98,13 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
static int board_init_i2c_busses(void)
{
I2C_MUX_DEVICE *dev = NULL;
uchar *buf;
uchar *dtt_bus = (uchar *)"pca9547:70:a";
/* Set up the Bus for the DTTs */
buf = (unsigned char *) getenv("dtt_bus");
if (buf != NULL)
dev = i2c_mux_ident_muxstring(buf);
if (dev == NULL) {
dev = i2c_mux_ident_muxstring(dtt_bus);
if (dev == NULL)
printf("Error couldn't add Bus for DTT\n");
printf("please setup dtt_bus to where your\n");
printf("DTT is found.\n");
}
return 0;
}
@ -133,6 +129,28 @@ const uint upma_table[] = {
};
#endif
static int piggy_present(void)
{
struct km_bec_fpga __iomem *base =
(struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE;
return in_8(&base->bprth) & PIGGY_PRESENT;
}
#if defined(CONFIG_KMVECT1)
int ethernet_present(void)
{
/* ethernet port connected to simple switch without piggy */
return 1;
}
#else
int ethernet_present(void)
{
return piggy_present();
}
#endif
int board_early_init_r(void)
{
struct km_bec_fpga *base =
@ -193,8 +211,75 @@ int misc_init_r(void)
return 0;
}
#if defined(CONFIG_KMVECT1)
#include <mv88e6352.h>
/* Marvell MV88E6122 switch configuration */
static struct mv88e_sw_reg extsw_conf[] = {
/* port 1, FRONT_MDI, autoneg */
{ PORT(1), PORT_PHY, NO_SPEED_FOR },
{ PORT(1), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
{ PHY(1), PHY_1000_CTRL, NO_ADV },
{ PHY(1), PHY_SPEC_CTRL, AUTO_MDIX_EN },
{ PHY(1), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST |
FULL_DUPLEX },
/* port 2, unused */
{ PORT(2), PORT_CTRL, PORT_DIS },
{ PHY(2), PHY_CTRL, PHY_PWR_DOWN },
{ PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
/* port 3, BP_MII (CPU), PHY mode, 100BASE */
{ PORT(3), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
/* port 4, ESTAR to slot 11, SerDes, 1000BASE-X */
{ PORT(4), PORT_STATUS, NO_PHY_DETECT },
{ PORT(4), PORT_PHY, SPEED_1000_FOR },
{ PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
/* port 5, ESTAR to slot 13, SerDes, 1000BASE-X */
{ PORT(5), PORT_STATUS, NO_PHY_DETECT },
{ PORT(5), PORT_PHY, SPEED_1000_FOR },
{ PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
/*
* Errata Fix: 1.9V Output from Internal 1.8V Regulator,
* acc . MV-S300889-00D.pdf , clause 4.5
*/
{ PORT(5), 0x1A, 0xADB1 },
/* port 6, unused, this port has no phy */
{ PORT(6), PORT_CTRL, PORT_DIS },
};
#endif
int last_stage_init(void)
{
#if defined(CONFIG_KMVECT1)
struct km_bec_fpga __iomem *base =
(struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE;
u8 tmp_reg;
/* Release mv88e6122 from reset */
tmp_reg = in_8(&base->res1[0]) | 0x10; /* DIRECT3 register */
out_8(&base->res1[0], tmp_reg); /* GP28 as output */
tmp_reg = in_8(&base->gprt3) | 0x10; /* GP28 to high */
out_8(&base->gprt3, tmp_reg);
/* configure MV88E6122 switch */
char *name = "UEC2";
if (miiphy_set_current_dev(name))
return 0;
mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf,
ARRAY_SIZE(extsw_conf));
mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR);
if (piggy_present()) {
setenv("ethact", "UEC2");
setenv("netdev", "eth1");
puts("using PIGGY for network boot\n");
} else {
setenv("netdev", "eth0");
puts("using frontport for network boot\n");
}
#endif
#if defined(CONFIG_KMCOGE5NE)
struct bfticu_iomap *base =
(struct bfticu_iomap *)CONFIG_SYS_BFTIC3_BASE;
@ -280,7 +365,7 @@ int checkboard(void)
{
puts("Board: Keymile " CONFIG_KM_BOARD_NAME);
if (ethernet_present())
if (piggy_present())
puts(" with PIGGY.");
puts("\n");
return 0;

5
board/keymile/scripts/develop-common.txt
View File

@ -1,8 +1,9 @@
altbootcmd=run ${subbootcmds}
bootcmd=run ${subbootcmds}
configure=km_setboardid && saveenv && reset
configure=run set_uimage; km_setboardid && saveenv && reset
subbootcmds=tftpfdt tftpkernel nfsargs add_default boot
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${toolchain}/${arch}
tftpkernel=tftpboot ${load_addr_r} ${hostname}/uImage
tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
toolchain=/opt/eldk
rootfssize=0
set_uimage=printenv uimage || setenv uimage uImage

5
board/keymile/scripts/ramfs-common.txt
View File

@ -4,8 +4,9 @@ altbootcmd=run ${subbootcmds}
bootcmd=run ${subbootcmds}
subbootcmds=tftpfdt tftpkernel setrootfsaddr tftpramfs flashargs add_default addpanic addramfs boot
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
configure=km_setboardid && saveenv && reset
configure=run set_uimage; km_setboardid && saveenv && reset
rootfsfile=${hostname}/rootfsImage
setrootfsaddr=setexpr value ${pnvramaddr} - ${rootfssize} && setenv rootfsaddr 0x${value}
tftpkernel=tftpboot ${load_addr_r} ${hostname}/uImage
tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
tftpramfs=tftpboot ${rootfsaddr} ${hostname}/rootfsImage
set_uimage=printenv uimage || setenv uimage uImage

7
boards.cfg
View File

@ -705,9 +705,10 @@ SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon
TQM834x powerpc mpc83xx tqm834x tqc
suvd3 powerpc mpc83xx km83xx keymile - suvd3:SUVD3
kmvect1 powerpc mpc83xx km83xx keymile - suvd3:KMVECT1
tuge1 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,TUGE1
tuxx1 powerpc mpc83xx km83xx keymile
kmsupx5 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,KMSUPX5
tuge1 powerpc mpc83xx km83xx keymile - tuxx1:TUGE1
tuxx1 powerpc mpc83xx km83xx keymile - tuxx1:TUXX1
kmopti2 powerpc mpc83xx km83xx keymile - tuxx1:KMOPTI2
kmsupx5 powerpc mpc83xx km83xx keymile - tuxx1:KMSUPX5
sbc8548 powerpc mpc85xx sbc8548 - - sbc8548
sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33
sbc8548_PCI_33_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,33,PCIE

4
drivers/mtd/nand/kmeter1_nand.c
View File

@ -119,7 +119,11 @@ static int kpn_nand_dev_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
#if defined(CONFIG_NAND_ECC_BCH)
nand->ecc.mode = NAND_ECC_SOFT_BCH;
#else
nand->ecc.mode = NAND_ECC_SOFT;
#endif
/* Reference hardware control function */
nand->cmd_ctrl = kpn_nand_hwcontrol;

12
include/configs/km/keymile-common.h
View File

@ -148,6 +148,14 @@
"ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
#endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
#ifdef CONFIG_NAND_ECC_BCH
#define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0"
#define CONFIG_KM_ECC_MODE " eccmode=bch"
#else
#define CONFIG_KM_UIMAGE_NAME "uImage\0"
#define CONFIG_KM_ECC_MODE
#endif
/*
* boottargets
* - set 'subbootcmds'
@ -184,6 +192,7 @@
":${hostname}:${netdev}:off3" \
" console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \
" mem=${kernelmem} init=${init}" \
CONFIG_KM_ECC_MODE \
" phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\
" " CONFIG_KM_UBI_LINUX_MTD " " \
CONFIG_KM_DEF_BOOT_ARGS_CPU \
@ -210,9 +219,10 @@
*/
#define CONFIG_KM_DEF_ENV_FLASH_BOOT \
"cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0" \
"cramfsloadkernel=cramfsload ${load_addr_r} uImage\0" \
"cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0" \
"ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR) \
" bootfs${boot_bank}\0" \
"uimage=" CONFIG_KM_UIMAGE_NAME \
CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
/*

4
include/configs/km/km8309-common.h
View File

@ -22,7 +22,7 @@
#define CONFIG_MPC830x 1 /* MPC830x family */
#define CONFIG_MPC8309 1 /* MPC8309 CPU specific */
#define CONFIG_KM_DEF_ARCH "arch=ppc_8xx\0"
#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0"
#define CONFIG_CMD_DIAG 1
/* include common defines/options for all 83xx Keymile boards */
@ -33,8 +33,6 @@
/* at end of uboot partition, before env */
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xF00B0000
#define CONFIG_MISC_INIT_R
/*
* System IO Config
*/

2
include/configs/km/km8321-common.h
View File

@ -38,8 +38,6 @@
/* include common defines/options for all 83xx Keymile boards */
#include "km83xx-common.h"
#define CONFIG_MISC_INIT_R
/*
* System IO Config
*/

9
include/configs/km/km83xx-common.h
View File

@ -165,19 +165,15 @@
#define CONFIG_UEC_ETH
#define CONFIG_ETHPRIME "UEC0"
#if !defined(CONFIG_MPC8309)
#define CONFIG_UEC_ETH1 /* GETH1 */
#define UEC_VERBOSE_DEBUG 1
#endif
#ifdef CONFIG_UEC_ETH1
#if defined(CONFIG_MPC8309)
#define CONFIG_SYS_UEC1_UCC_NUM 2 /* UCC3 */
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12
#else
#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
#endif
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
@ -316,7 +312,6 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_KM_DEF_ENV \
CONFIG_KM_DEF_ARCH \
"dtt_bus=pca9547:70:a\0" \
"EEprom_ivm=pca9547:70:9\0" \
"newenv=" \
"prot off 0xF00C0000 +0x40000 && " \

2
include/configs/km8360.h
View File

@ -25,6 +25,8 @@
#define CONFIG_KM_BOARD_NAME "kmcoge5ne"
#define CONFIG_KM_DEF_NETDEV "netdev=eth1\0"
#define CONFIG_CMD_NAND
#define CONFIG_NAND_ECC_BCH
#define CONFIG_BCH
#define CONFIG_NAND_KMETER1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS 1

37
include/configs/suvd3.h
View File

@ -110,4 +110,41 @@
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
/*
* QE UEC ethernet configuration
*/
#if defined(CONFIG_KMVECT1)
#define CONFIG_MV88E6352_SWITCH
#define CONFIG_KM_MVEXTSW_ADDR 0x10
/* ethernet port connected to simple switch 88e6122 (UEC0) */
#define CONFIG_UEC_ETH1
#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
#define CONFIG_FIXED_PHY 0xFFFFFFFF
#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */
#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
{devnum, speed, duplex}
#define CONFIG_SYS_FIXED_PHY_PORTS \
CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
/* ethernet port connected to piggy (UEC2) */
#define CONFIG_HAS_ETH1
#define CONFIG_UEC_ETH2
#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */
#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0
#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif /* CONFIG_KMVECT1 */
#endif /* __CONFIG_H */

46
include/configs/tuxx1.h
View File

@ -11,7 +11,7 @@
* (C) Copyright 2008
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* (C) Copyright 2010-2012
* (C) Copyright 2010-2013
* Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com
* Holger Brunck, Keymile GmbH, holger.bruncl@keymile.com
*
@ -27,16 +27,20 @@
/*
* High Level Configuration Options
*/
#ifdef CONFIG_KMSUPX5
#if defined(CONFIG_KMSUPX5)
#define CONFIG_KM_BOARD_NAME "kmsupx5"
#define CONFIG_HOSTNAME kmsupx5
#elif defined CONFIG_TUGE1
#elif defined(CONFIG_TUGE1)
#define CONFIG_KM_BOARD_NAME "tuge1"
#define CONFIG_HOSTNAME tuge1
#else
#define CONFIG_TUXXX /* TUXX1 board (tuxa1/tuda1) specific */
#elif defined(CONFIG_TUXX1) /* TUXX1 board (tuxa1/tuda1) specific */
#define CONFIG_KM_BOARD_NAME "tuxx1"
#define CONFIG_HOSTNAME tuxx1
#elif defined(CONFIG_KMOPTI2)
#define CONFIG_KM_BOARD_NAME "kmopti2"
#define CONFIG_HOSTNAME kmopti2
#else
#error ("Board not supported")
#endif
#define CONFIG_SYS_TEXT_BASE 0xF0000000
@ -46,18 +50,18 @@
#define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#ifndef CONFIG_KM_DISABLE_APP2
#if defined(CONFIG_TUXX1) || defined(CONFIG_KMOPTI2)
#define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */
#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */
#endif
/*
* Init Local Bus Memory Controller:
*
* Bank Bus Machine PortSz Size Device on TUDA1 TUXA1 TUGE1 KMSUPX4
* ---- --- ------- ------ ----- ---------------------------------------
* 2 Local GPCM 8 bit 256MB PAXG LPXF PAXI LPXF
* 3 Local GPCM 8 bit 256MB PINC3 PINC2 unused unused
* Device on
* Bank Bus Machine PortSz Size TUDA1 TUXA1 TUGE1 KMSUPX4 KMOPTI2
* ---- --- ------- ------ ----- ---------------------------------------
* 2 Local GPCM 8 bit 256MB PAXG LPXF PAXI LPXF PAXE
* 3 Local GPCM 8 bit 256MB PINC3 PINC2 unused unused OPI2(16 bit)
*
*/
@ -81,7 +85,7 @@
OR_GPCM_TRLX_SET | \
OR_GPCM_EHTR_CLEAR | \
OR_GPCM_EAD)
#ifndef CONFIG_KM_DISABLE_APP2
#if defined(CONFIG_TUXX1)
/*
* Configuration for C3 on the local bus
*/
@ -107,6 +111,22 @@
MxMR_WLFx_2X)
#endif
#if defined(CONFIG_KMOPTI2)
/*
* Configuration for C3 on the local bus
*/
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE
#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
BR_PS_16 | \
BR_MS_GPCM | \
BR_V)
#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
OR_GPCM_SCY_4 | \
OR_GPCM_TRLX_CLEAR | \
OR_GPCM_EHTR_CLEAR)
#endif
/*
* MMU Setup
*/
@ -125,7 +145,7 @@
BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
#ifdef CONFIG_KM_DISABLE_APP2
#if defined(CONFIG_TUGE1) || defined(CONFIG_KMSUPX5)
#define CONFIG_SYS_IBAT6L (0)
#define CONFIG_SYS_IBAT6U (0)
#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L