[PPC440SPe] Convert machine check exceptions handling
Convert using fixup mechanism to suppressing MCK for the duration of config read/write transaction: while fixups work fine with the case of a precise exception, we identified a major drawback with this approach when there's an imprecise case. In this scenario there is the following race condition: the fixup is (by design) set to catch the instruction following the one actually causing the exception; if an interrupt (e.g. decrementer) happens between those two instructions, the ISR code is executed before the fixup handler the machine check is no longer protected by the fixup handler as it appears as within the ISR code. In consequence the fixup approach is being phased out and replaced with explicit suppressing of MCK during a PCIe config read/write cycle. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
This commit is contained in:
parent
a89cbbd27a
commit
15ee4734e4
@ -40,31 +40,24 @@ enum {
|
||||
LNKW_X8 = 0x8
|
||||
};
|
||||
|
||||
static inline int pcie_in_8(const volatile unsigned char __iomem *addr)
|
||||
static void pcie_dmer_disable(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
PCIE_IN(lbzx, ret, addr);
|
||||
|
||||
return ret;
|
||||
mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE),
|
||||
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
|
||||
mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
|
||||
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
|
||||
mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
|
||||
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
|
||||
}
|
||||
|
||||
static inline int pcie_in_le16(const volatile unsigned short __iomem *addr)
|
||||
static void pcie_dmer_enable(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
PCIE_IN(lhbrx, ret, addr)
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static inline unsigned pcie_in_le32(const volatile unsigned __iomem *addr)
|
||||
{
|
||||
unsigned ret;
|
||||
|
||||
PCIE_IN(lwbrx, ret, addr);
|
||||
|
||||
return ret;
|
||||
mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE0_BASE),
|
||||
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
|
||||
mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
|
||||
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
|
||||
mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
|
||||
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
|
||||
}
|
||||
|
||||
|
||||
@ -81,17 +74,27 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
|
||||
devfn = PCI_BDF(0,0,0);
|
||||
offset += devfn << 4;
|
||||
|
||||
/*
|
||||
* Reading from configuration space of non-existing device can
|
||||
* generate transaction errors. For the read duration we suppress
|
||||
* assertion of machine check exceptions to avoid those.
|
||||
*/
|
||||
pcie_dmer_disable ();
|
||||
|
||||
switch (len) {
|
||||
case 1:
|
||||
*val = pcie_in_8(hose->cfg_data + offset);
|
||||
*val = in_8(hose->cfg_data + offset);
|
||||
break;
|
||||
case 2:
|
||||
*val = pcie_in_le16((u16 *)(hose->cfg_data + offset));
|
||||
*val = in_le16((u16 *)(hose->cfg_data + offset));
|
||||
break;
|
||||
default:
|
||||
*val = pcie_in_le32((u32*)(hose->cfg_data + offset));
|
||||
*val = in_le32((u32*)(hose->cfg_data + offset));
|
||||
break;
|
||||
}
|
||||
|
||||
pcie_dmer_enable ();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -107,6 +110,11 @@ static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
|
||||
devfn = PCI_BDF(0,0,0);
|
||||
offset += devfn << 4;
|
||||
|
||||
/*
|
||||
* Suppress MCK exceptions, similar to pcie_read_config()
|
||||
*/
|
||||
pcie_dmer_disable ();
|
||||
|
||||
switch (len) {
|
||||
case 1:
|
||||
out_8(hose->cfg_data + offset, val);
|
||||
@ -118,6 +126,9 @@ static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
|
||||
out_le32((u32 *)(hose->cfg_data + offset), val);
|
||||
break;
|
||||
}
|
||||
|
||||
pcie_dmer_enable ();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -38,6 +38,7 @@
|
||||
#define DCRN_PEGPL_REGBAL(base) (base + 0x13)
|
||||
#define DCRN_PEGPL_REGMSK(base) (base + 0x14)
|
||||
#define DCRN_PEGPL_SPECIAL(base) (base + 0x15)
|
||||
#define DCRN_PEGPL_CFG(base) (base + 0x16)
|
||||
|
||||
/*
|
||||
* System DCRs (SDRs)
|
||||
@ -161,20 +162,7 @@
|
||||
mtdcr(DCRN_SDR0_CFGADDR, offset); \
|
||||
mtdcr(DCRN_SDR0_CFGDATA,data);})
|
||||
|
||||
#define PCIE_IN(opcode, ret, addr) \
|
||||
__asm__ __volatile__( \
|
||||
"sync\n" \
|
||||
#opcode " %0,0,%1\n" \
|
||||
"1: twi 0,%0,0\n" \
|
||||
"isync\n" \
|
||||
"b 3f\n" \
|
||||
"2: li %0,-1\n" \
|
||||
"3:\n" \
|
||||
".section __ex_table,\"a\"\n" \
|
||||
".balign 4\n" \
|
||||
".long 1b,2b\n" \
|
||||
".previous\n" \
|
||||
: "=r" (ret) : "r" (addr), "m" (*addr));
|
||||
#define GPL_DMER_MASK_DISA 0x02000000
|
||||
|
||||
int ppc440spe_init_pcie(void);
|
||||
int ppc440spe_init_pcie_rootport(int port);
|
||||
|
@ -151,12 +151,6 @@ MachineCheckException(struct pt_regs *regs)
|
||||
int uncorr_ecc = 0;
|
||||
#endif
|
||||
|
||||
/* Probing PCI(E) using config cycles may cause this exception
|
||||
* when a device is not present. To gracefully recover in such
|
||||
* scenarios config read/write routines need to be instrumented in
|
||||
* order to return via fixup handler. For examples refer to
|
||||
* pcie_in_8(), pcie_in_le16() and pcie_in_le32()
|
||||
*/
|
||||
if ((fixup = search_exception_table(regs->nip)) != 0) {
|
||||
regs->nip = fixup;
|
||||
val = mfspr(MCSR);
|
||||
|
Loading…
Reference in New Issue
Block a user