Revert "powerpc: ppc4xx: remove lwmon5 support"
This reverts commit 8fe11b8901.
I'll add support to lwmon5 in the next patch and will remove
support for the broken lcd4_lwmon5 as well.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit is contained in:
Stefan Roese
Tom Rini
parent
1254b44a9f
commit
04386f656b
@ -8,6 +8,10 @@ choice
|
||||
prompt "Target select"
|
||||
optional
|
||||
|
||||
config TARGET_LWMON5
|
||||
bool "Support lwmon5"
|
||||
select SUPPORT_SPL
|
||||
|
||||
config TARGET_T3CORP
|
||||
bool "Support t3corp"
|
||||
|
||||
@ -165,6 +169,7 @@ source "board/gdsys/405ex/Kconfig"
|
||||
source "board/gdsys/dlvision/Kconfig"
|
||||
source "board/gdsys/gdppc440etx/Kconfig"
|
||||
source "board/gdsys/intip/Kconfig"
|
||||
source "board/lwmon5/Kconfig"
|
||||
source "board/mosaixtech/icon/Kconfig"
|
||||
source "board/mpl/mip405/Kconfig"
|
||||
source "board/mpl/pip405/Kconfig"
|
||||
|
||||
@ -106,6 +106,12 @@ struct arch_global_data {
|
||||
#ifdef CONFIG_SYS_FPGA_COUNT
|
||||
unsigned fpga_state[CONFIG_SYS_FPGA_COUNT];
|
||||
#endif
|
||||
#if defined(CONFIG_WD_MAX_RATE)
|
||||
unsigned long long wdt_last; /* trace watch-dog triggering rate */
|
||||
#endif
|
||||
#if defined(CONFIG_LWMON5)
|
||||
unsigned long kbd_status;
|
||||
#endif
|
||||
};
|
||||
|
||||
#include <asm-generic/global_data.h>
|
||||
|
||||
9
board/lwmon5/Kconfig
Normal file
9
board/lwmon5/Kconfig
Normal file
@ -0,0 +1,9 @@
|
||||
if TARGET_LWMON5
|
||||
|
||||
config SYS_BOARD
|
||||
default "lwmon5"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "lwmon5"
|
||||
|
||||
endif
|
||||
7
board/lwmon5/MAINTAINERS
Normal file
7
board/lwmon5/MAINTAINERS
Normal file
@ -0,0 +1,7 @@
|
||||
LWMON5 BOARD
|
||||
M: Stefan Roese <sr@denx.de>
|
||||
S: Maintained
|
||||
F: board/lwmon5/
|
||||
F: include/configs/lwmon5.h
|
||||
F: configs/lcd4_lwmon5_defconfig
|
||||
F: configs/lwmon5_defconfig
|
||||
9
board/lwmon5/Makefile
Normal file
9
board/lwmon5/Makefile
Normal file
@ -0,0 +1,9 @@
|
||||
#
|
||||
# (C) Copyright 2002-2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y = lwmon5.o kbd.o sdram.o
|
||||
extra-y += init.o
|
||||
18
board/lwmon5/config.mk
Normal file
18
board/lwmon5/config.mk
Normal file
@ -0,0 +1,18 @@
|
||||
#
|
||||
# (C) Copyright 2002
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
# lwmon5 (440EPx)
|
||||
#
|
||||
|
||||
PLATFORM_CPPFLAGS += -DCONFIG_440=1
|
||||
|
||||
ifeq ($(debug),1)
|
||||
PLATFORM_CPPFLAGS += -DDEBUG
|
||||
endif
|
||||
|
||||
ifeq ($(dbcr),1)
|
||||
PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
|
||||
endif
|
||||
75
board/lwmon5/init.S
Normal file
75
board/lwmon5/init.S
Normal file
@ -0,0 +1,75 @@
|
||||
/*
|
||||
* (C) Copyright 2007
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <asm-offsets.h>
|
||||
#include <ppc_asm.tmpl>
|
||||
#include <config.h>
|
||||
#include <asm/mmu.h>
|
||||
|
||||
/**************************************************************************
|
||||
* TLB TABLE
|
||||
*
|
||||
* This table is used by the cpu boot code to setup the initial tlb
|
||||
* entries. Rather than make broad assumptions in the cpu source tree,
|
||||
* this table lets each board set things up however they like.
|
||||
*
|
||||
* Pointer to the table is returned in r1
|
||||
*
|
||||
*************************************************************************/
|
||||
.section .bootpg,"ax"
|
||||
.globl tlbtab
|
||||
|
||||
tlbtab:
|
||||
tlbtab_start
|
||||
|
||||
/*
|
||||
* BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
|
||||
* speed up boot process. It is patched after relocation to enable SA_I
|
||||
*/
|
||||
tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G)
|
||||
|
||||
/*
|
||||
* TLB entries for SDRAM are not needed on this platform.
|
||||
* They are dynamically generated in the SPD DDR(2) detection
|
||||
* routine.
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_SYS_INIT_RAM_DCACHE
|
||||
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
|
||||
tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G)
|
||||
#endif
|
||||
|
||||
/* TLB-entry for PCI Memory */
|
||||
tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_RW | SA_IG)
|
||||
tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_RW | SA_IG)
|
||||
tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_RW | SA_IG)
|
||||
tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_RW | SA_IG)
|
||||
|
||||
/* TLB-entry for the FPGA Chip select 2 */
|
||||
tlbentry(CONFIG_SYS_FPGA_BASE_0, SZ_1M, CONFIG_SYS_FPGA_BASE_0, 1, AC_RWX | SA_I|SA_G)
|
||||
|
||||
/* TLB-entry for the FPGA Chip select 3 */
|
||||
tlbentry(CONFIG_SYS_FPGA_BASE_1, SZ_1M, CONFIG_SYS_FPGA_BASE_1, 1,AC_RWX | SA_I|SA_G)
|
||||
|
||||
/* TLB-entry for the LIME Controller */
|
||||
tlbentry(CONFIG_SYS_LIME_BASE_0, SZ_16M, CONFIG_SYS_LIME_BASE_0, 1, AC_RWX | SA_I|SA_G)
|
||||
tlbentry(CONFIG_SYS_LIME_BASE_1, SZ_16M, CONFIG_SYS_LIME_BASE_1, 1, AC_RWX | SA_I|SA_G)
|
||||
tlbentry(CONFIG_SYS_LIME_BASE_2, SZ_16M, CONFIG_SYS_LIME_BASE_2, 1, AC_RWX | SA_I|SA_G)
|
||||
tlbentry(CONFIG_SYS_LIME_BASE_3, SZ_16M, CONFIG_SYS_LIME_BASE_3, 1, AC_RWX | SA_I|SA_G)
|
||||
|
||||
/* TLB-entry for Internal Registers & OCM */
|
||||
tlbentry(0xe0000000, SZ_16M, 0xe0000000, 0, AC_RWX | SA_I)
|
||||
|
||||
/*TLB-entry PCI registers*/
|
||||
tlbentry(0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_RWX | SA_IG)
|
||||
|
||||
/* TLB-entry for peripherals */
|
||||
tlbentry(0xEF000000, SZ_16M, 0xEF000000, 1, AC_RWX | SA_IG)
|
||||
|
||||
tlbtab_end
|
||||
490
board/lwmon5/kbd.c
Normal file
490
board/lwmon5/kbd.c
Normal file
@ -0,0 +1,490 @@
|
||||
/*
|
||||
* (C) Copyright 2007
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* (C) Copyright 2001, 2002
|
||||
* DENX Software Engineering
|
||||
* Wolfgang Denk, wd@denx.de
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/* define DEBUG for debugging output (obviously ;-)) */
|
||||
#if 0
|
||||
#define DEBUG
|
||||
#endif
|
||||
|
||||
#include <common.h>
|
||||
#include <i2c.h>
|
||||
#include <command.h>
|
||||
#include <post.h>
|
||||
#include <serial.h>
|
||||
#include <malloc.h>
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/string.h> /* for strdup */
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
static void kbd_init (void);
|
||||
static int compare_magic (uchar *kbd_data, uchar *str);
|
||||
|
||||
/*--------------------- Local macros and constants --------------------*/
|
||||
#define _NOT_USED_ 0xFFFFFFFF
|
||||
|
||||
/*------------------------- dspic io expander -----------------------*/
|
||||
#define DSPIC_PON_STATUS_REG 0x80A
|
||||
#define DSPIC_PON_INV_STATUS_REG 0x80C
|
||||
#define DSPIC_PON_KEY_REG 0x810
|
||||
/*------------------------- Keyboard controller -----------------------*/
|
||||
/* command codes */
|
||||
#define KEYBD_CMD_READ_KEYS 0x01
|
||||
#define KEYBD_CMD_READ_VERSION 0x02
|
||||
#define KEYBD_CMD_READ_STATUS 0x03
|
||||
#define KEYBD_CMD_RESET_ERRORS 0x10
|
||||
|
||||
/* status codes */
|
||||
#define KEYBD_STATUS_MASK 0x3F
|
||||
#define KEYBD_STATUS_H_RESET 0x20
|
||||
#define KEYBD_STATUS_BROWNOUT 0x10
|
||||
#define KEYBD_STATUS_WD_RESET 0x08
|
||||
#define KEYBD_STATUS_OVERLOAD 0x04
|
||||
#define KEYBD_STATUS_ILLEGAL_WR 0x02
|
||||
#define KEYBD_STATUS_ILLEGAL_RD 0x01
|
||||
|
||||
/* Number of bytes returned from Keyboard Controller */
|
||||
#define KEYBD_VERSIONLEN 2 /* version information */
|
||||
|
||||
/*
|
||||
* This is different from the "old" lwmon dsPIC kbd controller
|
||||
* implementation. Now the controller still answers with 9 bytes,
|
||||
* but the last 3 bytes are always "0x06 0x07 0x08". So we just
|
||||
* set the length to compare to 6 instead of 9.
|
||||
*/
|
||||
#define KEYBD_DATALEN 6 /* normal key scan data */
|
||||
|
||||
/* maximum number of "magic" key codes that can be assigned */
|
||||
|
||||
static uchar kbd_addr = CONFIG_SYS_I2C_KEYBD_ADDR;
|
||||
static uchar dspic_addr = CONFIG_SYS_I2C_DSPIC_IO_ADDR;
|
||||
|
||||
static uchar *key_match (uchar *);
|
||||
|
||||
#define KEYBD_SET_DEBUGMODE '#' /* Magic key to enable debug output */
|
||||
|
||||
/***********************************************************************
|
||||
F* Function: int board_postclk_init (void) P*A*Z*
|
||||
*
|
||||
P* Parameters: none
|
||||
P*
|
||||
P* Returnvalue: int
|
||||
P* - 0 is always returned.
|
||||
*
|
||||
Z* Intention: This function is the board_postclk_init() method implementation
|
||||
Z* for the lwmon board.
|
||||
*
|
||||
***********************************************************************/
|
||||
int board_postclk_init (void)
|
||||
{
|
||||
kbd_init();
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static void kbd_init (void)
|
||||
{
|
||||
uchar kbd_data[KEYBD_DATALEN];
|
||||
uchar tmp_data[KEYBD_DATALEN];
|
||||
uchar val, errcd;
|
||||
int i;
|
||||
|
||||
i2c_set_bus_num(0);
|
||||
|
||||
gd->arch.kbd_status = 0;
|
||||
|
||||
/* Forced by PIC. Delays <= 175us loose */
|
||||
udelay(1000);
|
||||
|
||||
/* Read initial keyboard error code */
|
||||
val = KEYBD_CMD_READ_STATUS;
|
||||
i2c_write (kbd_addr, 0, 0, &val, 1);
|
||||
i2c_read (kbd_addr, 0, 0, &errcd, 1);
|
||||
/* clear unused bits */
|
||||
errcd &= KEYBD_STATUS_MASK;
|
||||
/* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */
|
||||
errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT);
|
||||
if (errcd) {
|
||||
gd->arch.kbd_status |= errcd << 8;
|
||||
}
|
||||
/* Reset error code and verify */
|
||||
val = KEYBD_CMD_RESET_ERRORS;
|
||||
i2c_write (kbd_addr, 0, 0, &val, 1);
|
||||
udelay(1000); /* delay NEEDED by keyboard PIC !!! */
|
||||
|
||||
val = KEYBD_CMD_READ_STATUS;
|
||||
i2c_write (kbd_addr, 0, 0, &val, 1);
|
||||
i2c_read (kbd_addr, 0, 0, &val, 1);
|
||||
|
||||
val &= KEYBD_STATUS_MASK; /* clear unused bits */
|
||||
if (val) { /* permanent error, report it */
|
||||
gd->arch.kbd_status |= val;
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* Read current keyboard state.
|
||||
*
|
||||
* After the error reset it may take some time before the
|
||||
* keyboard PIC picks up a valid keyboard scan - the total
|
||||
* scan time is approx. 1.6 ms (information by Martin Rajek,
|
||||
* 28 Sep 2002). We read a couple of times for the keyboard
|
||||
* to stabilize, using a big enough delay.
|
||||
* 10 times should be enough. If the data is still changing,
|
||||
* we use what we get :-(
|
||||
*/
|
||||
|
||||
memset (tmp_data, 0xFF, KEYBD_DATALEN); /* impossible value */
|
||||
for (i=0; i<10; ++i) {
|
||||
val = KEYBD_CMD_READ_KEYS;
|
||||
i2c_write (kbd_addr, 0, 0, &val, 1);
|
||||
i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
|
||||
|
||||
if (memcmp(kbd_data, tmp_data, KEYBD_DATALEN) == 0) {
|
||||
/* consistent state, done */
|
||||
break;
|
||||
}
|
||||
/* remeber last state, delay, and retry */
|
||||
memcpy (tmp_data, kbd_data, KEYBD_DATALEN);
|
||||
udelay (5000);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/* Read a register from the dsPIC. */
|
||||
int _dspic_read(ushort reg, ushort *data)
|
||||
{
|
||||
uchar buf[sizeof(*data)];
|
||||
int rval;
|
||||
|
||||
if (i2c_read(dspic_addr, reg, 2, buf, 2))
|
||||
return -1;
|
||||
|
||||
rval = i2c_read(dspic_addr, reg, sizeof(reg), buf, sizeof(*data));
|
||||
*data = (buf[0] << 8) | buf[1];
|
||||
|
||||
return rval;
|
||||
}
|
||||
|
||||
|
||||
/***********************************************************************
|
||||
F* Function: int misc_init_r (void) P*A*Z*
|
||||
*
|
||||
P* Parameters: none
|
||||
P*
|
||||
P* Returnvalue: int
|
||||
P* - 0 is always returned, even in the case of a keyboard
|
||||
P* error.
|
||||
*
|
||||
Z* Intention: This function is the misc_init_r() method implementation
|
||||
Z* for the lwmon board.
|
||||
Z* The keyboard controller is initialized and the result
|
||||
Z* of a read copied to the environment variable "keybd".
|
||||
Z* If KEYBD_SET_DEBUGMODE is defined, a check is made for
|
||||
Z* this key, and if found display to the LCD will be enabled.
|
||||
Z* The keys in "keybd" are checked against the magic
|
||||
Z* keycommands defined in the environment.
|
||||
Z* See also key_match().
|
||||
*
|
||||
D* Design: wd@denx.de
|
||||
C* Coding: wd@denx.de
|
||||
V* Verification: dzu@denx.de
|
||||
***********************************************************************/
|
||||
int misc_init_r_kbd (void)
|
||||
{
|
||||
uchar kbd_data[KEYBD_DATALEN];
|
||||
char keybd_env[2 * KEYBD_DATALEN + 1];
|
||||
uchar kbd_init_status = gd->arch.kbd_status >> 8;
|
||||
uchar kbd_status = gd->arch.kbd_status;
|
||||
uchar val;
|
||||
ushort data, inv_data;
|
||||
char *str;
|
||||
int i;
|
||||
|
||||
if (kbd_init_status) {
|
||||
printf ("KEYBD: Error %02X\n", kbd_init_status);
|
||||
}
|
||||
if (kbd_status) { /* permanent error, report it */
|
||||
printf ("*** Keyboard error code %02X ***\n", kbd_status);
|
||||
sprintf (keybd_env, "%02X", kbd_status);
|
||||
setenv ("keybd", keybd_env);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Now we know that we have a working keyboard, so disable
|
||||
* all output to the LCD except when a key press is detected.
|
||||
*/
|
||||
|
||||
if ((console_assign (stdout, "serial") < 0) ||
|
||||
(console_assign (stderr, "serial") < 0)) {
|
||||
printf ("Can't assign serial port as output device\n");
|
||||
}
|
||||
|
||||
/* Read Version */
|
||||
val = KEYBD_CMD_READ_VERSION;
|
||||
i2c_write (kbd_addr, 0, 0, &val, 1);
|
||||
i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_VERSIONLEN);
|
||||
printf ("KEYBD: Version %d.%d\n", kbd_data[0], kbd_data[1]);
|
||||
|
||||
/* Read current keyboard state */
|
||||
val = KEYBD_CMD_READ_KEYS;
|
||||
i2c_write (kbd_addr, 0, 0, &val, 1);
|
||||
i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
|
||||
|
||||
/* read out start key from bse01 received via can */
|
||||
_dspic_read(DSPIC_PON_STATUS_REG, &data);
|
||||
/* check highbyte from status register */
|
||||
if (data > 0xFF) {
|
||||
_dspic_read(DSPIC_PON_INV_STATUS_REG, &inv_data);
|
||||
|
||||
/* check inverse data */
|
||||
if ((data+inv_data) == 0xFFFF) {
|
||||
/* don't overwrite local key */
|
||||
if (kbd_data[1] == 0) {
|
||||
/* read key value */
|
||||
_dspic_read(DSPIC_PON_KEY_REG, &data);
|
||||
str = (char *)&data;
|
||||
/* swap bytes */
|
||||
kbd_data[1] = str[1];
|
||||
kbd_data[2] = str[0];
|
||||
printf("CAN received startkey: 0x%X\n", data);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
for (i = 0; i < KEYBD_DATALEN; ++i) {
|
||||
sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
|
||||
}
|
||||
|
||||
setenv ("keybd", keybd_env);
|
||||
|
||||
str = strdup ((char *)key_match (kbd_data)); /* decode keys */
|
||||
#ifdef KEYBD_SET_DEBUGMODE
|
||||
if (kbd_data[0] == KEYBD_SET_DEBUGMODE) { /* set debug mode */
|
||||
if ((console_assign (stdout, "lcd") < 0) ||
|
||||
(console_assign (stderr, "lcd") < 0)) {
|
||||
printf ("Can't assign LCD display as output device\n");
|
||||
}
|
||||
}
|
||||
#endif /* KEYBD_SET_DEBUGMODE */
|
||||
#ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */
|
||||
setenv ("preboot", str); /* set or delete definition */
|
||||
#endif /* CONFIG_PREBOOT */
|
||||
if (str != NULL) {
|
||||
free (str);
|
||||
}
|
||||
return (0);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PREBOOT
|
||||
|
||||
static uchar kbd_magic_prefix[] = "key_magic";
|
||||
static uchar kbd_command_prefix[] = "key_cmd";
|
||||
|
||||
static int compare_magic (uchar *kbd_data, uchar *str)
|
||||
{
|
||||
uchar compare[KEYBD_DATALEN-1];
|
||||
char *nxt;
|
||||
int i;
|
||||
|
||||
/* Don't include modifier byte */
|
||||
memcpy (compare, kbd_data+1, KEYBD_DATALEN-1);
|
||||
|
||||
for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) {
|
||||
uchar c;
|
||||
int k;
|
||||
|
||||
c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16);
|
||||
|
||||
if (str == (uchar *)nxt) { /* invalid character */
|
||||
break;
|
||||
}
|
||||
|
||||
/*
|
||||
* Check if this key matches the input.
|
||||
* Set matches to zero, so they match only once
|
||||
* and we can find duplicates or extra keys
|
||||
*/
|
||||
for (k = 0; k < sizeof(compare); ++k) {
|
||||
if (compare[k] == '\0') /* only non-zero entries */
|
||||
continue;
|
||||
if (c == compare[k]) { /* found matching key */
|
||||
compare[k] = '\0';
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (k == sizeof(compare)) {
|
||||
return -1; /* unmatched key */
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* A full match leaves no keys in the `compare' array,
|
||||
*/
|
||||
for (i = 0; i < sizeof(compare); ++i) {
|
||||
if (compare[i])
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/***********************************************************************
|
||||
F* Function: static uchar *key_match (uchar *kbd_data) P*A*Z*
|
||||
*
|
||||
P* Parameters: uchar *kbd_data
|
||||
P* - The keys to match against our magic definitions
|
||||
P*
|
||||
P* Returnvalue: uchar *
|
||||
P* - != NULL: Pointer to the corresponding command(s)
|
||||
P* NULL: No magic is about to happen
|
||||
*
|
||||
Z* Intention: Check if pressed key(s) match magic sequence,
|
||||
Z* and return the command string associated with that key(s).
|
||||
Z*
|
||||
Z* If no key press was decoded, NULL is returned.
|
||||
Z*
|
||||
Z* Note: the first character of the argument will be
|
||||
Z* overwritten with the "magic charcter code" of the
|
||||
Z* decoded key(s), or '\0'.
|
||||
Z*
|
||||
Z* Note: the string points to static environment data
|
||||
Z* and must be saved before you call any function that
|
||||
Z* modifies the environment.
|
||||
*
|
||||
D* Design: wd@denx.de
|
||||
C* Coding: wd@denx.de
|
||||
V* Verification: dzu@denx.de
|
||||
***********************************************************************/
|
||||
static uchar *key_match (uchar *kbd_data)
|
||||
{
|
||||
char magic[sizeof (kbd_magic_prefix) + 1];
|
||||
uchar *suffix;
|
||||
char *kbd_magic_keys;
|
||||
|
||||
/*
|
||||
* The following string defines the characters that can pe appended
|
||||
* to "key_magic" to form the names of environment variables that
|
||||
* hold "magic" key codes, i. e. such key codes that can cause
|
||||
* pre-boot actions. If the string is empty (""), then only
|
||||
* "key_magic" is checked (old behaviour); the string "125" causes
|
||||
* checks for "key_magic1", "key_magic2" and "key_magic5", etc.
|
||||
*/
|
||||
if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
|
||||
kbd_magic_keys = "";
|
||||
|
||||
/* loop over all magic keys;
|
||||
* use '\0' suffix in case of empty string
|
||||
*/
|
||||
for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) {
|
||||
sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
|
||||
debug ("### Check magic \"%s\"\n", magic);
|
||||
if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) {
|
||||
char cmd_name[sizeof (kbd_command_prefix) + 1];
|
||||
char *cmd;
|
||||
|
||||
sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
|
||||
|
||||
cmd = getenv (cmd_name);
|
||||
debug ("### Set PREBOOT to $(%s): \"%s\"\n",
|
||||
cmd_name, cmd ? cmd : "<<NULL>>");
|
||||
*kbd_data = *suffix;
|
||||
return ((uchar *)cmd);
|
||||
}
|
||||
}
|
||||
debug ("### Delete PREBOOT\n");
|
||||
*kbd_data = '\0';
|
||||
return (NULL);
|
||||
}
|
||||
#endif /* CONFIG_PREBOOT */
|
||||
|
||||
/***********************************************************************
|
||||
F* Function: int do_kbd (cmd_tbl_t *cmdtp, int flag,
|
||||
F* int argc, char * const argv[]) P*A*Z*
|
||||
*
|
||||
P* Parameters: cmd_tbl_t *cmdtp
|
||||
P* - Pointer to our command table entry
|
||||
P* int flag
|
||||
P* - If the CMD_FLAG_REPEAT bit is set, then this call is
|
||||
P* a repetition
|
||||
P* int argc
|
||||
P* - Argument count
|
||||
P* char * const argv[]
|
||||
P* - Array of the actual arguments
|
||||
P*
|
||||
P* Returnvalue: int
|
||||
P* - 0 is always returned.
|
||||
*
|
||||
Z* Intention: Implement the "kbd" command.
|
||||
Z* The keyboard status is read. The result is printed on
|
||||
Z* the console and written into the "keybd" environment
|
||||
Z* variable.
|
||||
*
|
||||
D* Design: wd@denx.de
|
||||
C* Coding: wd@denx.de
|
||||
V* Verification: dzu@denx.de
|
||||
***********************************************************************/
|
||||
int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||
{
|
||||
uchar kbd_data[KEYBD_DATALEN];
|
||||
char keybd_env[2 * KEYBD_DATALEN + 1];
|
||||
uchar val;
|
||||
int i;
|
||||
|
||||
#if 0 /* Done in kbd_init */
|
||||
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
||||
#endif
|
||||
|
||||
/* Read keys */
|
||||
val = KEYBD_CMD_READ_KEYS;
|
||||
i2c_write (kbd_addr, 0, 0, &val, 1);
|
||||
i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
|
||||
|
||||
puts ("Keys:");
|
||||
for (i = 0; i < KEYBD_DATALEN; ++i) {
|
||||
sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
|
||||
printf (" %02x", kbd_data[i]);
|
||||
}
|
||||
putc ('\n');
|
||||
setenv ("keybd", keybd_env);
|
||||
return 0;
|
||||
}
|
||||
|
||||
U_BOOT_CMD(
|
||||
kbd, 1, 1, do_kbd,
|
||||
"read keyboard status",
|
||||
""
|
||||
);
|
||||
|
||||
/*----------------------------- Utilities -----------------------------*/
|
||||
|
||||
#ifdef CONFIG_POST
|
||||
/*
|
||||
* Returns 1 if keys pressed to start the power-on long-running tests
|
||||
* Called from board_init_f().
|
||||
*/
|
||||
int post_hotkeys_pressed(void)
|
||||
{
|
||||
uchar kbd_data[KEYBD_DATALEN];
|
||||
uchar val;
|
||||
|
||||
/* Read keys */
|
||||
val = KEYBD_CMD_READ_KEYS;
|
||||
i2c_write (kbd_addr, 0, 0, &val, 1);
|
||||
i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
|
||||
|
||||
return (compare_magic(kbd_data, (uchar *)CONFIG_POST_KEY_MAGIC) == 0);
|
||||
}
|
||||
#endif
|
||||
558
board/lwmon5/lwmon5.c
Normal file
558
board/lwmon5/lwmon5.c
Normal file
@ -0,0 +1,558 @@
|
||||
/*
|
||||
* (C) Copyright 2007-2013
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <command.h>
|
||||
#include <asm/ppc440.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/ppc4xx-gpio.h>
|
||||
#include <asm/io.h>
|
||||
#include <post.h>
|
||||
#include <flash.h>
|
||||
#include <mtd/cfi_flash.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
static phys_addr_t lwmon5_cfi_flash_bank_addr[2] = CONFIG_SYS_FLASH_BANKS_LIST;
|
||||
|
||||
ulong flash_get_size(ulong base, int banknum);
|
||||
int misc_init_r_kbd(void);
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
u32 sdr0_pfc1, sdr0_pfc2;
|
||||
u32 reg;
|
||||
|
||||
/* PLB Write pipelining disabled. Denali Core workaround */
|
||||
mtdcr(PLB4A0_ACR, 0xDE000000);
|
||||
mtdcr(PLB4A1_ACR, 0xDE000000);
|
||||
|
||||
/*--------------------------------------------------------------------
|
||||
* Setup the interrupt controller polarities, triggers, etc.
|
||||
*-------------------------------------------------------------------*/
|
||||
mtdcr(UIC0SR, 0xffffffff); /* clear all. if write with 1 then the status is cleared */
|
||||
mtdcr(UIC0ER, 0x00000000); /* disable all */
|
||||
mtdcr(UIC0CR, 0x00000000); /* we have not critical interrupts at the moment */
|
||||
mtdcr(UIC0PR, 0xFFBFF1EF); /* Adjustment of the polarity */
|
||||
mtdcr(UIC0TR, 0x00000900); /* per ref-board manual */
|
||||
mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
|
||||
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
||||
|
||||
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
||||
mtdcr(UIC1ER, 0x00000000); /* disable all */
|
||||
mtdcr(UIC1CR, 0x00000000); /* all non-critical */
|
||||
mtdcr(UIC1PR, 0xFFFFC6A5); /* Adjustment of the polarity */
|
||||
mtdcr(UIC1TR, 0x60000040); /* per ref-board manual */
|
||||
mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
|
||||
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
||||
|
||||
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
||||
mtdcr(UIC2ER, 0x00000000); /* disable all */
|
||||
mtdcr(UIC2CR, 0x00000000); /* all non-critical */
|
||||
mtdcr(UIC2PR, 0x27C00000); /* Adjustment of the polarity */
|
||||
mtdcr(UIC2TR, 0x3C000000); /* per ref-board manual */
|
||||
mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
|
||||
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
||||
|
||||
/* Trace Pins are disabled. SDR0_PFC0 Register */
|
||||
mtsdr(SDR0_PFC0, 0x0);
|
||||
|
||||
/* select Ethernet pins */
|
||||
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
||||
/* SMII via ZMII */
|
||||
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
|
||||
SDR0_PFC1_SELECT_CONFIG_6;
|
||||
mfsdr(SDR0_PFC2, sdr0_pfc2);
|
||||
sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
|
||||
SDR0_PFC2_SELECT_CONFIG_6;
|
||||
|
||||
/* enable SPI (SCP) */
|
||||
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL;
|
||||
|
||||
mtsdr(SDR0_PFC2, sdr0_pfc2);
|
||||
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
||||
|
||||
mtsdr(SDR0_PFC4, 0x80000000);
|
||||
|
||||
/* PCI arbiter disabled */
|
||||
/* PCI Host Configuration disbaled */
|
||||
mfsdr(SDR0_PCI0, reg);
|
||||
reg = 0;
|
||||
mtsdr(SDR0_PCI0, 0x00000000 | reg);
|
||||
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1);
|
||||
|
||||
#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
|
||||
/* enable the LSB transmitter */
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_LSB_ENABLE, 1);
|
||||
/* enable the CAN transmitter */
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_CAN_ENABLE, 1);
|
||||
|
||||
reg = 0; /* reuse as counter */
|
||||
out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
|
||||
in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR)
|
||||
& ~CONFIG_SYS_DSPIC_TEST_MASK);
|
||||
while (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) {
|
||||
udelay(1000);
|
||||
}
|
||||
if (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY)) {
|
||||
/* set "boot error" flag */
|
||||
out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
|
||||
in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) |
|
||||
CONFIG_SYS_DSPIC_TEST_MASK);
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Reset PHY's:
|
||||
* The PHY's need a 2nd reset pulse, since the MDIO address is latched
|
||||
* upon reset, and with the first reset upon powerup, the addresses are
|
||||
* not latched reliable, since the IRQ line is multiplexed with an
|
||||
* MDIO address. A 2nd reset at this time will make sure, that the
|
||||
* correct address is latched.
|
||||
*/
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
|
||||
udelay(1000);
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 0);
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 0);
|
||||
udelay(1000);
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Override weak default with board specific version
|
||||
*/
|
||||
phys_addr_t cfi_flash_bank_addr(int bank)
|
||||
{
|
||||
return lwmon5_cfi_flash_bank_addr[bank];
|
||||
}
|
||||
|
||||
/*
|
||||
* Override the weak default mapping function with a board specific one
|
||||
*/
|
||||
u32 flash_get_bank_size(int cs, int idx)
|
||||
{
|
||||
return flash_info[idx].size;
|
||||
}
|
||||
|
||||
int board_early_init_r(void)
|
||||
{
|
||||
u32 val0, val1;
|
||||
|
||||
/*
|
||||
* lwmon5 is manufactured in 2 different board versions:
|
||||
* The lwmon5a board has 64MiB NOR flash instead of the
|
||||
* 128MiB of the original lwmon5. Unfortunately the CFI driver
|
||||
* will report 2 banks of 64MiB even for the smaller flash
|
||||
* chip, since the bank is mirrored. To fix this, we bring
|
||||
* one bank into CFI query mode and read its response. This
|
||||
* enables us to detect the real number of flash devices/
|
||||
* banks which will be used later on by the common CFI driver.
|
||||
*/
|
||||
|
||||
/* Put bank 0 into CFI command mode and read */
|
||||
out_be32((void *)CONFIG_SYS_FLASH0, 0x00980098);
|
||||
val0 = in_be32((void *)CONFIG_SYS_FLASH0 + FLASH_OFFSET_CFI_RESP);
|
||||
val1 = in_be32((void *)CONFIG_SYS_FLASH1 + FLASH_OFFSET_CFI_RESP);
|
||||
|
||||
/* Reset flash again out of query mode */
|
||||
out_be32((void *)CONFIG_SYS_FLASH0, 0x00f000f0);
|
||||
|
||||
/* When not identical, we have 2 different flash devices/banks */
|
||||
if (val0 != val1)
|
||||
return 0;
|
||||
|
||||
/*
|
||||
* Now we're sure that we're running on a LWMON5a board with
|
||||
* only 64MiB NOR flash in one bank:
|
||||
*
|
||||
* Set flash base address and bank count for CFI driver probing.
|
||||
*/
|
||||
cfi_flash_num_flash_banks = 1;
|
||||
lwmon5_cfi_flash_bank_addr[0] = CONFIG_SYS_FLASH0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int misc_init_r(void)
|
||||
{
|
||||
u32 pbcr;
|
||||
int size_val = 0;
|
||||
u32 reg;
|
||||
#ifndef CONFIG_LCD4_LWMON5
|
||||
unsigned long usb2d0cr = 0;
|
||||
unsigned long usb2phy0cr, usb2h0cr = 0;
|
||||
unsigned long sdr0_pfc1, sdr0_srst;
|
||||
#endif
|
||||
|
||||
/*
|
||||
* FLASH stuff...
|
||||
*/
|
||||
|
||||
/* Re-do sizing to get full correct info */
|
||||
|
||||
/* adjust flash start and offset */
|
||||
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
|
||||
gd->bd->bi_flashoffset = 0;
|
||||
|
||||
mfebc(PB0CR, pbcr);
|
||||
size_val = ffs(gd->bd->bi_flashsize) - 21;
|
||||
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
|
||||
mtebc(PB0CR, pbcr);
|
||||
|
||||
/*
|
||||
* Re-check to get correct base address
|
||||
*/
|
||||
flash_get_size(gd->bd->bi_flashstart, 0);
|
||||
|
||||
/* Monitor protection ON by default */
|
||||
flash_protect(FLAG_PROTECT_SET, -CONFIG_SYS_MONITOR_LEN, 0xffffffff,
|
||||
&flash_info[cfi_flash_num_flash_banks - 1]);
|
||||
|
||||
/* Env protection ON by default */
|
||||
flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
|
||||
CONFIG_ENV_ADDR_REDUND + 2 * CONFIG_ENV_SECT_SIZE - 1,
|
||||
&flash_info[cfi_flash_num_flash_banks - 1]);
|
||||
|
||||
#ifndef CONFIG_LCD4_LWMON5
|
||||
/*
|
||||
* USB suff...
|
||||
*/
|
||||
|
||||
/* Reset USB */
|
||||
/* Reset of USB2PHY0 must be active at least 10 us */
|
||||
mtsdr(SDR0_SRST0, SDR0_SRST0_USB2H | SDR0_SRST0_USB2D);
|
||||
udelay(2000);
|
||||
|
||||
mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY | SDR0_SRST1_USB2HUTMI |
|
||||
SDR0_SRST1_USB2HPHY | SDR0_SRST1_OPBA2 |
|
||||
SDR0_SRST1_PLB42OPB1 | SDR0_SRST1_OPB2PLB40);
|
||||
udelay(2000);
|
||||
|
||||
/* Errata CHIP_6 */
|
||||
|
||||
/* 1. Set internal PHY configuration */
|
||||
/* SDR Setting */
|
||||
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
||||
mfsdr(SDR0_USB0, usb2d0cr);
|
||||
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
||||
mfsdr(SDR0_USB2H0CR, usb2h0cr);
|
||||
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
|
||||
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
|
||||
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
|
||||
|
||||
/*
|
||||
* An 8-bit/60MHz interface is the only possible alternative
|
||||
* when connecting the Device to the PHY
|
||||
*/
|
||||
usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
|
||||
usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
|
||||
|
||||
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
||||
mtsdr(SDR0_USB0, usb2d0cr);
|
||||
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
||||
mtsdr(SDR0_USB2H0CR, usb2h0cr);
|
||||
|
||||
/* 2. De-assert internal PHY reset */
|
||||
mfsdr(SDR0_SRST1, sdr0_srst);
|
||||
sdr0_srst = sdr0_srst & ~SDR0_SRST1_USB20PHY;
|
||||
mtsdr(SDR0_SRST1, sdr0_srst);
|
||||
|
||||
/* 3. Wait for more than 1 ms */
|
||||
udelay(2000);
|
||||
|
||||
/* 4. De-assert USB 2.0 Host main reset */
|
||||
mfsdr(SDR0_SRST0, sdr0_srst);
|
||||
sdr0_srst = sdr0_srst &~ SDR0_SRST0_USB2H;
|
||||
mtsdr(SDR0_SRST0, sdr0_srst);
|
||||
udelay(1000);
|
||||
|
||||
/* 5. De-assert reset of OPB2 cores */
|
||||
mfsdr(SDR0_SRST1, sdr0_srst);
|
||||
sdr0_srst = sdr0_srst &~ SDR0_SRST1_PLB42OPB1;
|
||||
sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPB2PLB40;
|
||||
sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPBA2;
|
||||
mtsdr(SDR0_SRST1, sdr0_srst);
|
||||
udelay(1000);
|
||||
|
||||
/* 6. Set EHCI Configure FLAG */
|
||||
|
||||
/* 7. Reassert internal PHY reset: */
|
||||
mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY);
|
||||
udelay(1000);
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Clear resets
|
||||
*/
|
||||
mtsdr(SDR0_SRST1, 0x00000000);
|
||||
mtsdr(SDR0_SRST0, 0x00000000);
|
||||
|
||||
#ifndef CONFIG_LCD4_LWMON5
|
||||
printf("USB: Host(int phy) Device(ext phy)\n");
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Clear PLB4A0_ACR[WRP]
|
||||
* This fix will make the MAL burst disabling patch for the Linux
|
||||
* EMAC driver obsolete.
|
||||
*/
|
||||
reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
|
||||
mtdcr(PLB4A0_ACR, reg);
|
||||
|
||||
#ifndef CONFIG_LCD4_LWMON5
|
||||
/*
|
||||
* Init matrix keyboard
|
||||
*/
|
||||
misc_init_r_kbd();
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
char buf[64];
|
||||
int i = getenv_f("serial#", buf, sizeof(buf));
|
||||
|
||||
printf("Board: %s", __stringify(CONFIG_HOSTNAME));
|
||||
|
||||
if (i > 0) {
|
||||
puts(", serial# ");
|
||||
puts(buf);
|
||||
}
|
||||
putc('\n');
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
void hw_watchdog_reset(void)
|
||||
{
|
||||
int val;
|
||||
#if defined(CONFIG_WD_MAX_RATE)
|
||||
unsigned long long ct = get_ticks();
|
||||
|
||||
/*
|
||||
* Don't allow watch-dog triggering more frequently than
|
||||
* the predefined value CONFIG_WD_MAX_RATE [ticks].
|
||||
*/
|
||||
if (ct >= gd->arch.wdt_last) {
|
||||
if ((ct - gd->arch.wdt_last) < CONFIG_WD_MAX_RATE)
|
||||
return;
|
||||
} else {
|
||||
/* Time base counter had been reset */
|
||||
if (((unsigned long long)(-1) - gd->arch.wdt_last + ct) <
|
||||
CONFIG_WD_MAX_RATE)
|
||||
return;
|
||||
}
|
||||
gd->arch.wdt_last = get_ticks();
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Toggle watchdog output
|
||||
*/
|
||||
val = gpio_read_out_bit(CONFIG_SYS_GPIO_WATCHDOG) == 0 ? 1 : 0;
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_WATCHDOG, val);
|
||||
}
|
||||
|
||||
int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||
{
|
||||
if (argc < 2)
|
||||
return cmd_usage(cmdtp);
|
||||
|
||||
if ((strcmp(argv[1], "on") == 0))
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 1);
|
||||
else if ((strcmp(argv[1], "off") == 0))
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 0);
|
||||
else
|
||||
return cmd_usage(cmdtp);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
U_BOOT_CMD(
|
||||
eepromwp, 2, 0, do_eeprom_wp,
|
||||
"eeprom write protect off/on",
|
||||
"<on|off> - enable (on) or disable (off) I2C EEPROM write protect"
|
||||
);
|
||||
|
||||
#if defined(CONFIG_VIDEO)
|
||||
#include <video_fb.h>
|
||||
#include <mb862xx.h>
|
||||
|
||||
extern GraphicDevice mb862xx;
|
||||
|
||||
static const gdc_regs init_regs [] = {
|
||||
{ 0x0100, 0x00000f00 },
|
||||
{ 0x0020, 0x801401df },
|
||||
{ 0x0024, 0x00000000 },
|
||||
{ 0x0028, 0x00000000 },
|
||||
{ 0x002c, 0x00000000 },
|
||||
{ 0x0110, 0x00000000 },
|
||||
{ 0x0114, 0x00000000 },
|
||||
{ 0x0118, 0x01df0280 },
|
||||
{ 0x0004, 0x031f0000 },
|
||||
{ 0x0008, 0x027f027f },
|
||||
{ 0x000c, 0x015f028f },
|
||||
{ 0x0010, 0x020c0000 },
|
||||
{ 0x0014, 0x01df01ea },
|
||||
{ 0x0018, 0x00000000 },
|
||||
{ 0x001c, 0x01e00280 },
|
||||
{ 0x0100, 0x80010f00 },
|
||||
{ 0x0, 0x0 }
|
||||
};
|
||||
|
||||
const gdc_regs *board_get_regs(void)
|
||||
{
|
||||
return init_regs;
|
||||
}
|
||||
|
||||
/* Returns Lime base address */
|
||||
unsigned int board_video_init(void)
|
||||
{
|
||||
/*
|
||||
* Reset Lime controller
|
||||
*/
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1);
|
||||
udelay(500);
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1);
|
||||
|
||||
mb862xx.winSizeX = 640;
|
||||
mb862xx.winSizeY = 480;
|
||||
mb862xx.gdfBytesPP = 2;
|
||||
mb862xx.gdfIndex = GDF_15BIT_555RGB;
|
||||
|
||||
return CONFIG_SYS_LIME_BASE_0;
|
||||
}
|
||||
|
||||
#define DEFAULT_BRIGHTNESS 0x64
|
||||
|
||||
static void board_backlight_brightness(int brightness)
|
||||
{
|
||||
if (brightness > 0) {
|
||||
/* pwm duty, lamp on */
|
||||
out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), brightness);
|
||||
out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x701);
|
||||
} else {
|
||||
/* lamp off */
|
||||
out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), 0x00);
|
||||
out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x00);
|
||||
}
|
||||
}
|
||||
|
||||
void board_backlight_switch(int flag)
|
||||
{
|
||||
char * param;
|
||||
int rc;
|
||||
|
||||
if (flag) {
|
||||
param = getenv("brightness");
|
||||
rc = param ? simple_strtol(param, NULL, 10) : -1;
|
||||
if (rc < 0)
|
||||
rc = DEFAULT_BRIGHTNESS;
|
||||
} else {
|
||||
rc = 0;
|
||||
}
|
||||
board_backlight_brightness(rc);
|
||||
}
|
||||
|
||||
#if defined(CONFIG_CONSOLE_EXTRA_INFO)
|
||||
/*
|
||||
* Return text to be printed besides the logo.
|
||||
*/
|
||||
void video_get_info_str(int line_number, char *info)
|
||||
{
|
||||
if (line_number == 1)
|
||||
strcpy(info, " Board: Lwmon5 (Liebherr Elektronik GmbH)");
|
||||
else
|
||||
info [0] = '\0';
|
||||
}
|
||||
#endif /* CONFIG_CONSOLE_EXTRA_INFO */
|
||||
#endif /* CONFIG_VIDEO */
|
||||
|
||||
void board_reset(void)
|
||||
{
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_BOARD_RESET, 1);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SPL_OS_BOOT
|
||||
/*
|
||||
* lwmon5 specific implementation of spl_start_uboot()
|
||||
*
|
||||
* RETURN
|
||||
* 0 if booting into OS is selected (default)
|
||||
* 1 if booting into U-Boot is selected
|
||||
*/
|
||||
int spl_start_uboot(void)
|
||||
{
|
||||
char s[8];
|
||||
|
||||
env_init();
|
||||
getenv_f("boot_os", s, sizeof(s));
|
||||
if ((s != NULL) && (strcmp(s, "yes") == 0))
|
||||
return 0;
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
/*
|
||||
* This function is called from the SPL U-Boot version for
|
||||
* early init stuff, that needs to be done for OS (e.g. Linux)
|
||||
* booting. Doing it later in the real U-Boot would not work
|
||||
* in case that the SPL U-Boot boots Linux directly.
|
||||
*/
|
||||
void spl_board_init(void)
|
||||
{
|
||||
const gdc_regs *regs = board_get_regs();
|
||||
|
||||
/*
|
||||
* Setup PFC registers, mainly for ethernet support
|
||||
* later on in Linux
|
||||
*/
|
||||
board_early_init_f();
|
||||
|
||||
/* enable the LSB transmitter */
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_LSB_ENABLE, 1);
|
||||
|
||||
/*
|
||||
* Clear resets
|
||||
*/
|
||||
mtsdr(SDR0_SRST1, 0x00000000);
|
||||
mtsdr(SDR0_SRST0, 0x00000000);
|
||||
|
||||
/*
|
||||
* Reset Lime controller
|
||||
*/
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1);
|
||||
udelay(500);
|
||||
gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1);
|
||||
|
||||
out_be32((void *)CONFIG_SYS_LIME_SDRAM_CLOCK, CONFIG_SYS_MB862xx_CCF);
|
||||
udelay(300);
|
||||
out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_MB862xx_MMR);
|
||||
|
||||
while (regs->index) {
|
||||
out_be32((void *)(CONFIG_SYS_LIME_BASE_0 + GC_DISP_BASE) +
|
||||
regs->index, regs->value);
|
||||
regs++;
|
||||
}
|
||||
|
||||
board_backlight_brightness(DEFAULT_BRIGHTNESS);
|
||||
}
|
||||
#endif
|
||||
247
board/lwmon5/sdram.c
Normal file
247
board/lwmon5/sdram.c
Normal file
@ -0,0 +1,247 @@
|
||||
/*
|
||||
* (C) Copyright 2006
|
||||
* Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
|
||||
* Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
|
||||
* Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
|
||||
* Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
|
||||
* Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
|
||||
*
|
||||
* (C) Copyright 2007-2013
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/* define DEBUG for debugging output (obviously ;-)) */
|
||||
#if 0
|
||||
#define DEBUG
|
||||
#endif
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/mmu.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/cache.h>
|
||||
#include <asm/ppc440.h>
|
||||
#include <watchdog.h>
|
||||
|
||||
/*
|
||||
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
|
||||
* region. Right now the cache should still be disabled in U-Boot because of the
|
||||
* EMAC driver, that need it's buffer descriptor to be located in non cached
|
||||
* memory.
|
||||
*
|
||||
* If at some time this restriction doesn't apply anymore, just define
|
||||
* CONFIG_4xx_DCACHE in the board config file and this code should setup
|
||||
* everything correctly.
|
||||
*/
|
||||
#ifdef CONFIG_4xx_DCACHE
|
||||
#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
|
||||
#else
|
||||
#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------------+
|
||||
* Prototypes
|
||||
*-----------------------------------------------------------------------------*/
|
||||
extern int denali_wait_for_dlllock(void);
|
||||
extern void denali_core_search_data_eye(void);
|
||||
extern void dcbz_area(u32 start_address, u32 num_bytes);
|
||||
|
||||
static u32 is_ecc_enabled(void)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
mfsdram(DDR0_22, val);
|
||||
val &= DDR0_22_CTRL_RAW_MASK;
|
||||
if (val)
|
||||
return 1;
|
||||
else
|
||||
return 0;
|
||||
}
|
||||
|
||||
void board_add_ram_info(int use_default)
|
||||
{
|
||||
PPC4xx_SYS_INFO board_cfg;
|
||||
u32 val;
|
||||
|
||||
if (is_ecc_enabled())
|
||||
puts(" (ECC");
|
||||
else
|
||||
puts(" (ECC not");
|
||||
|
||||
get_sys_info(&board_cfg);
|
||||
printf(" enabled, %ld MHz", (board_cfg.freqPLB * 2) / 1000000);
|
||||
|
||||
mfsdram(DDR0_03, val);
|
||||
val = DDR0_03_CASLAT_DECODE(val);
|
||||
printf(", CL%d)", val);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_DDR_ECC
|
||||
static void wait_ddr_idle(void)
|
||||
{
|
||||
/*
|
||||
* Controller idle status cannot be determined for Denali
|
||||
* DDR2 code. Just return here.
|
||||
*/
|
||||
}
|
||||
|
||||
static void program_ecc(u32 start_address,
|
||||
u32 num_bytes,
|
||||
u32 tlb_word2_i_value)
|
||||
{
|
||||
u32 val;
|
||||
u32 current_addr = start_address;
|
||||
u32 size;
|
||||
int bytes_remaining;
|
||||
|
||||
sync();
|
||||
wait_ddr_idle();
|
||||
|
||||
/*
|
||||
* Because of 440EPx errata CHIP 11, we don't touch the last 256
|
||||
* bytes of SDRAM.
|
||||
*/
|
||||
bytes_remaining = num_bytes - CONFIG_SYS_MEM_TOP_HIDE;
|
||||
|
||||
/*
|
||||
* We have to write the ECC bytes by zeroing and flushing in smaller
|
||||
* steps, since the whole 256MByte takes too long for the external
|
||||
* watchdog.
|
||||
*/
|
||||
while (bytes_remaining > 0) {
|
||||
size = min((64 << 20), bytes_remaining);
|
||||
|
||||
/* Write zero's to SDRAM */
|
||||
dcbz_area(current_addr, size);
|
||||
|
||||
/* Write modified dcache lines back to memory */
|
||||
clean_dcache_range(current_addr, current_addr + size);
|
||||
|
||||
current_addr += 64 << 20;
|
||||
bytes_remaining -= 64 << 20;
|
||||
WATCHDOG_RESET();
|
||||
}
|
||||
|
||||
sync();
|
||||
wait_ddr_idle();
|
||||
|
||||
/* Clear error status */
|
||||
mfsdram(DDR0_00, val);
|
||||
mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
|
||||
|
||||
/* Set 'int_mask' parameter to functionnal value */
|
||||
mfsdram(DDR0_01, val);
|
||||
mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF));
|
||||
|
||||
sync();
|
||||
wait_ddr_idle();
|
||||
}
|
||||
#endif
|
||||
|
||||
/*************************************************************************
|
||||
*
|
||||
* initdram -- 440EPx's DDR controller is a DENALI Core
|
||||
*
|
||||
************************************************************************/
|
||||
phys_size_t initdram (int board_type)
|
||||
{
|
||||
#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_LCD4_LWMON5)
|
||||
/* CL=4 */
|
||||
mtsdram(DDR0_02, 0x00000000);
|
||||
|
||||
mtsdram(DDR0_00, 0x0000190A);
|
||||
mtsdram(DDR0_01, 0x01000000);
|
||||
mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */
|
||||
|
||||
mtsdram(DDR0_04, 0x0B030300);
|
||||
mtsdram(DDR0_05, 0x02020308);
|
||||
mtsdram(DDR0_06, 0x0003C812);
|
||||
mtsdram(DDR0_07, 0x00090100);
|
||||
mtsdram(DDR0_08, 0x03c80001);
|
||||
mtsdram(DDR0_09, 0x00011D5F);
|
||||
mtsdram(DDR0_10, 0x00000100);
|
||||
mtsdram(DDR0_11, 0x000CC800);
|
||||
mtsdram(DDR0_12, 0x00000003);
|
||||
mtsdram(DDR0_14, 0x00000000);
|
||||
mtsdram(DDR0_17, 0x1e000000);
|
||||
mtsdram(DDR0_18, 0x1e1e1e1e);
|
||||
mtsdram(DDR0_19, 0x1e1e1e1e);
|
||||
mtsdram(DDR0_20, 0x0B0B0B0B);
|
||||
mtsdram(DDR0_21, 0x0B0B0B0B);
|
||||
#ifdef CONFIG_DDR_ECC
|
||||
mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */
|
||||
#else
|
||||
mtsdram(DDR0_22, 0x00267F0B);
|
||||
#endif
|
||||
|
||||
mtsdram(DDR0_23, 0x01000000);
|
||||
mtsdram(DDR0_24, 0x01010001);
|
||||
|
||||
mtsdram(DDR0_26, 0x2D93028A);
|
||||
mtsdram(DDR0_27, 0x0784682B);
|
||||
|
||||
mtsdram(DDR0_28, 0x00000080);
|
||||
mtsdram(DDR0_31, 0x00000000);
|
||||
mtsdram(DDR0_42, 0x01000008);
|
||||
|
||||
mtsdram(DDR0_43, 0x050A0200);
|
||||
mtsdram(DDR0_44, 0x00000005);
|
||||
mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
|
||||
|
||||
denali_wait_for_dlllock();
|
||||
|
||||
#if defined(CONFIG_DDR_DATA_EYE)
|
||||
/* -----------------------------------------------------------+
|
||||
* Perform data eye search if requested.
|
||||
* ----------------------------------------------------------*/
|
||||
program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
|
||||
TLB_WORD2_I_ENABLE);
|
||||
denali_core_search_data_eye();
|
||||
remove_tlb(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20);
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Program tlb entries for this size (dynamic)
|
||||
*/
|
||||
program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
|
||||
MY_TLB_WORD2_I_ENABLE);
|
||||
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
#if defined(CONFIG_4xx_DCACHE)
|
||||
/*
|
||||
* If ECC is enabled, initialize the parity bits.
|
||||
*/
|
||||
program_ecc(0, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
|
||||
#else /* CONFIG_4xx_DCACHE */
|
||||
/*
|
||||
* Setup 2nd TLB with same physical address but different virtual address
|
||||
* with cache enabled. This is done for fast ECC generation.
|
||||
*/
|
||||
program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
|
||||
|
||||
/*
|
||||
* If ECC is enabled, initialize the parity bits.
|
||||
*/
|
||||
program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
|
||||
|
||||
/*
|
||||
* Now after initialization (auto-calibration and ECC generation)
|
||||
* remove the TLB entries with caches enabled and program again with
|
||||
* desired cache functionality
|
||||
*/
|
||||
remove_tlb(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20);
|
||||
#endif /* CONFIG_4xx_DCACHE */
|
||||
#endif /* CONFIG_DDR_ECC */
|
||||
|
||||
/*
|
||||
* Clear possible errors resulting from data-eye-search.
|
||||
* If not done, then we could get an interrupt later on when
|
||||
* exceptions are enabled.
|
||||
*/
|
||||
set_mcsr(get_mcsr());
|
||||
#endif /* CONFIG_SPL_BUILD */
|
||||
|
||||
return (CONFIG_SYS_MBYTES_SDRAM << 20);
|
||||
}
|
||||
6
configs/lcd4_lwmon5_defconfig
Normal file
6
configs/lcd4_lwmon5_defconfig
Normal file
@ -0,0 +1,6 @@
|
||||
CONFIG_PPC=y
|
||||
CONFIG_4xx=y
|
||||
CONFIG_TARGET_LWMON5=y
|
||||
CONFIG_SPL=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="LCD4_LWMON5"
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
4
configs/lwmon5_defconfig
Normal file
4
configs/lwmon5_defconfig
Normal file
@ -0,0 +1,4 @@
|
||||
CONFIG_PPC=y
|
||||
CONFIG_4xx=y
|
||||
CONFIG_TARGET_LWMON5=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
@ -19,7 +19,6 @@ zeus powerpc ppc4xx - - Stefan Roese
|
||||
sbc405 powerpc ppc4xx - -
|
||||
pcs440ep powerpc ppc4xx - - Stefan Roese <sr@denx.de>
|
||||
p3p440 powerpc ppc4xx - - Stefan Roese <sr@denx.de>
|
||||
lwmon5 powerpc ppc4xx - - Stefan Roese <sr@denx.de>
|
||||
csb272/csb472 powerpc ppc4xx - - Tolunay Orkun <torkun@nextio.com>
|
||||
alpr powerpc ppc4xx - - Stefan Roese <sr@denx.de>
|
||||
cam_enc_4xx arm arm926ejs 8d775763 2015-08-20 Heiko Schocher <hs@denx.de>
|
||||
|
||||
@ -419,7 +419,8 @@ void *video_hw_init (void)
|
||||
board_disp_init ();
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SOCRATES) && !(CONFIG_POST & CONFIG_SYS_POST_SYSMON)
|
||||
#if (defined(CONFIG_LWMON5) || \
|
||||
defined(CONFIG_SOCRATES)) && !(CONFIG_POST & CONFIG_SYS_POST_SYSMON)
|
||||
/* Lamp on */
|
||||
board_backlight_switch (1);
|
||||
#endif
|
||||
|
||||
692
include/configs/lwmon5.h
Normal file
692
include/configs/lwmon5.h
Normal file
@ -0,0 +1,692 @@
|
||||
/*
|
||||
* (C) Copyright 2007-2013
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/*
|
||||
* lwmon5.h - configuration for lwmon5 board
|
||||
*/
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* Liebherr extra version info
|
||||
*/
|
||||
#define CONFIG_IDENT_STRING " - v2.0"
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
*/
|
||||
#define CONFIG_LWMON5 1 /* Board is lwmon5 */
|
||||
#define CONFIG_440EPX 1 /* Specific PPC440EPx */
|
||||
#define CONFIG_440 1 /* ... PPC440 family */
|
||||
|
||||
#ifdef CONFIG_LCD4_LWMON5
|
||||
#define CONFIG_SYS_TEXT_BASE 0x01000000 /* SPL U-Boot TEXT_BASE */
|
||||
#define CONFIG_HOSTNAME lcd4_lwmon5
|
||||
#else
|
||||
#define CONFIG_SYS_TEXT_BASE 0xFFF80000
|
||||
#define CONFIG_HOSTNAME lwmon5
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */
|
||||
|
||||
#define CONFIG_4xx_DCACHE /* enable cache in SDRAM */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */
|
||||
#define CONFIG_BOARD_EARLY_INIT_R /* Call board_early_init_r */
|
||||
#define CONFIG_BOARD_POSTCLK_INIT /* Call board_postclk_init */
|
||||
#define CONFIG_MISC_INIT_R /* Call misc_init_r */
|
||||
#define CONFIG_BOARD_RESET /* Call board_reset */
|
||||
|
||||
/*
|
||||
* Base addresses -- Note these are effective addresses where the
|
||||
* actual resources get mapped (not physical addresses)
|
||||
*/
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */
|
||||
#define CONFIG_SYS_MONITOR_LEN 0x80000
|
||||
#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Reserved for malloc */
|
||||
|
||||
#define CONFIG_SYS_BOOT_BASE_ADDR 0xf0000000
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */
|
||||
#define CONFIG_SYS_LIME_BASE_0 0xc0000000
|
||||
#define CONFIG_SYS_LIME_BASE_1 0xc1000000
|
||||
#define CONFIG_SYS_LIME_BASE_2 0xc2000000
|
||||
#define CONFIG_SYS_LIME_BASE_3 0xc3000000
|
||||
#define CONFIG_SYS_FPGA_BASE_0 0xc4000000
|
||||
#define CONFIG_SYS_FPGA_BASE_1 0xc4200000
|
||||
#define CONFIG_SYS_OCM_BASE 0xe0010000 /* ocm */
|
||||
#define CONFIG_SYS_PCI_BASE 0xe0000000 /* Internal PCI regs */
|
||||
#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
|
||||
#define CONFIG_SYS_PCI_MEMBASE1 (CONFIG_SYS_PCI_MEMBASE + 0x10000000)
|
||||
#define CONFIG_SYS_PCI_MEMBASE2 (CONFIG_SYS_PCI_MEMBASE1 + 0x10000000)
|
||||
#define CONFIG_SYS_PCI_MEMBASE3 (CONFIG_SYS_PCI_MEMBASE2 + 0x10000000)
|
||||
|
||||
#ifndef CONFIG_LCD4_LWMON5
|
||||
#define CONFIG_SYS_USB2D0_BASE 0xe0000100
|
||||
#define CONFIG_SYS_USB_DEVICE 0xe0000000
|
||||
#define CONFIG_SYS_USB_HOST 0xe0000400
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Initial RAM & stack pointer
|
||||
*
|
||||
* On LWMON5 we use D-cache as init-ram and stack pointer. We also move
|
||||
* the POST_WORD from OCM to a 440EPx register that preserves it's
|
||||
* content during reset (GPT0_COMP6). This way we reserve the OCM (16k)
|
||||
* for logbuffer only. (GPT0_COMP1-COMP5 are reserved for logbuffer header.)
|
||||
*/
|
||||
#ifndef CONFIG_LCD4_LWMON5
|
||||
#define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10)
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
||||
#else
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10)
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
|
||||
#endif
|
||||
/* unused GPT0 COMP reg */
|
||||
#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
|
||||
#define CONFIG_SYS_OCM_SIZE (16 << 10)
|
||||
/* 440EPx errata CHIP 11: don't use last 4kbytes */
|
||||
#define CONFIG_SYS_MEM_TOP_HIDE (4 << 10)
|
||||
|
||||
/* Additional registers for watchdog timer post test */
|
||||
#define CONFIG_SYS_WATCHDOG_TIME_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_MASK2)
|
||||
#define CONFIG_SYS_WATCHDOG_FLAGS_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_MASK1)
|
||||
#define CONFIG_SYS_DSPIC_TEST_ADDR CONFIG_SYS_WATCHDOG_FLAGS_ADDR
|
||||
#define CONFIG_SYS_OCM_STATUS_ADDR CONFIG_SYS_WATCHDOG_FLAGS_ADDR
|
||||
#define CONFIG_SYS_WATCHDOG_MAGIC 0x12480000
|
||||
#define CONFIG_SYS_WATCHDOG_MAGIC_MASK 0xFFFF0000
|
||||
#define CONFIG_SYS_DSPIC_TEST_MASK 0x00000001
|
||||
#define CONFIG_SYS_OCM_STATUS_OK 0x00009A00
|
||||
#define CONFIG_SYS_OCM_STATUS_FAIL 0x0000A300
|
||||
#define CONFIG_SYS_OCM_STATUS_MASK 0x0000FF00
|
||||
|
||||
/*
|
||||
* Serial Port
|
||||
*/
|
||||
#define CONFIG_CONS_INDEX 2 /* Use UART1 */
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
||||
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
|
||||
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external clock provided */
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */
|
||||
|
||||
/*
|
||||
* FLASH related
|
||||
*/
|
||||
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
|
||||
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
||||
|
||||
#define CONFIG_SYS_FLASH0 0xFC000000
|
||||
#define CONFIG_SYS_FLASH1 0xF8000000
|
||||
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 }
|
||||
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2 /* max number of memory banks */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
|
||||
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
||||
|
||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
|
||||
#define CONFIG_SYS_FLASH_PROTECTION /* use hardware flash protection */
|
||||
|
||||
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
||||
#define CONFIG_SYS_FLASH_QUIET_TEST /* don't warn upon unknown flash */
|
||||
|
||||
#define CONFIG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
|
||||
#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN) - CONFIG_ENV_SECT_SIZE)
|
||||
#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
|
||||
|
||||
/* Address and size of Redundant Environment Sector */
|
||||
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
|
||||
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
||||
|
||||
/*
|
||||
* DDR SDRAM
|
||||
*/
|
||||
#define CONFIG_SYS_MBYTES_SDRAM 256
|
||||
#define CONFIG_SYS_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */
|
||||
#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */
|
||||
#ifndef CONFIG_LCD4_LWMON5
|
||||
#define CONFIG_DDR_ECC /* enable ECC */
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_LCD4_LWMON5
|
||||
/* POST support */
|
||||
#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \
|
||||
CONFIG_SYS_POST_CPU | \
|
||||
CONFIG_SYS_POST_ECC | \
|
||||
CONFIG_SYS_POST_ETHER | \
|
||||
CONFIG_SYS_POST_FPU | \
|
||||
CONFIG_SYS_POST_I2C | \
|
||||
CONFIG_SYS_POST_MEMORY | \
|
||||
CONFIG_SYS_POST_OCM | \
|
||||
CONFIG_SYS_POST_RTC | \
|
||||
CONFIG_SYS_POST_SPR | \
|
||||
CONFIG_SYS_POST_UART | \
|
||||
CONFIG_SYS_POST_SYSMON | \
|
||||
CONFIG_SYS_POST_WATCHDOG | \
|
||||
CONFIG_SYS_POST_DSP | \
|
||||
CONFIG_SYS_POST_BSPEC1 | \
|
||||
CONFIG_SYS_POST_BSPEC2 | \
|
||||
CONFIG_SYS_POST_BSPEC3 | \
|
||||
CONFIG_SYS_POST_BSPEC4 | \
|
||||
CONFIG_SYS_POST_BSPEC5)
|
||||
|
||||
/* Define here the base-addresses of the UARTs to test in POST */
|
||||
#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \
|
||||
CONFIG_SYS_NS16550_COM2 }
|
||||
|
||||
#define CONFIG_POST_UART { \
|
||||
"UART test", \
|
||||
"uart", \
|
||||
"This test verifies the UART operation.", \
|
||||
POST_RAM | POST_SLOWTEST | POST_ALWAYS | POST_MANUAL, \
|
||||
&uart_post_test, \
|
||||
NULL, \
|
||||
NULL, \
|
||||
CONFIG_SYS_POST_UART \
|
||||
}
|
||||
|
||||
#define CONFIG_POST_WATCHDOG { \
|
||||
"Watchdog timer test", \
|
||||
"watchdog", \
|
||||
"This test checks the watchdog timer.", \
|
||||
POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT, \
|
||||
&lwmon5_watchdog_post_test, \
|
||||
NULL, \
|
||||
NULL, \
|
||||
CONFIG_SYS_POST_WATCHDOG \
|
||||
}
|
||||
|
||||
#define CONFIG_POST_BSPEC1 { \
|
||||
"dsPIC init test", \
|
||||
"dspic_init", \
|
||||
"This test returns result of dsPIC READY test run earlier.", \
|
||||
POST_RAM | POST_ALWAYS, \
|
||||
&dspic_init_post_test, \
|
||||
NULL, \
|
||||
NULL, \
|
||||
CONFIG_SYS_POST_BSPEC1 \
|
||||
}
|
||||
|
||||
#define CONFIG_POST_BSPEC2 { \
|
||||
"dsPIC test", \
|
||||
"dspic", \
|
||||
"This test gets result of dsPIC POST and dsPIC version.", \
|
||||
POST_RAM | POST_ALWAYS, \
|
||||
&dspic_post_test, \
|
||||
NULL, \
|
||||
NULL, \
|
||||
CONFIG_SYS_POST_BSPEC2 \
|
||||
}
|
||||
|
||||
#define CONFIG_POST_BSPEC3 { \
|
||||
"FPGA test", \
|
||||
"fpga", \
|
||||
"This test checks FPGA registers and memory.", \
|
||||
POST_RAM | POST_ALWAYS | POST_MANUAL, \
|
||||
&fpga_post_test, \
|
||||
NULL, \
|
||||
NULL, \
|
||||
CONFIG_SYS_POST_BSPEC3 \
|
||||
}
|
||||
|
||||
#define CONFIG_POST_BSPEC4 { \
|
||||
"GDC test", \
|
||||
"gdc", \
|
||||
"This test checks GDC registers and memory.", \
|
||||
POST_RAM | POST_ALWAYS | POST_MANUAL,\
|
||||
&gdc_post_test, \
|
||||
NULL, \
|
||||
NULL, \
|
||||
CONFIG_SYS_POST_BSPEC4 \
|
||||
}
|
||||
|
||||
#define CONFIG_POST_BSPEC5 { \
|
||||
"SYSMON1 test", \
|
||||
"sysmon1", \
|
||||
"This test checks GPIO_62_EPX pin indicating power failure.", \
|
||||
POST_RAM | POST_MANUAL | POST_NORMAL | POST_SLOWTEST, \
|
||||
&sysmon1_post_test, \
|
||||
NULL, \
|
||||
NULL, \
|
||||
CONFIG_SYS_POST_BSPEC5 \
|
||||
}
|
||||
|
||||
#define CONFIG_SYS_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */
|
||||
#define CONFIG_LOGBUFFER
|
||||
/* Reserve GPT0_COMP1-COMP5 for logbuffer header */
|
||||
#define CONFIG_ALT_LH_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP1)
|
||||
#define CONFIG_ALT_LB_ADDR (CONFIG_SYS_OCM_BASE)
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* I2C
|
||||
*/
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_PPC4XX
|
||||
#define CONFIG_SYS_I2C_PPC4XX_CH0
|
||||
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000
|
||||
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
|
||||
|
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* RTC */
|
||||
#define CONFIG_SYS_I2C_EEPROM_CPU_ADDR 0x52 /* EEPROM (CPU Modul) */
|
||||
#define CONFIG_SYS_I2C_EEPROM_MB_ADDR 0x53 /* EEPROM AT24C128 (MainBoard) */
|
||||
#define CONFIG_SYS_I2C_DSPIC_ADDR 0x54 /* dsPIC */
|
||||
#define CONFIG_SYS_I2C_DSPIC_2_ADDR 0x55 /* dsPIC */
|
||||
#define CONFIG_SYS_I2C_DSPIC_KEYB_ADDR 0x56 /* dsPIC */
|
||||
#define CONFIG_SYS_I2C_DSPIC_IO_ADDR 0x57 /* dsPIC */
|
||||
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel AT24C128 has */
|
||||
/* 64 byte page write mode using*/
|
||||
/* last 6 bits of the address */
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
|
||||
|
||||
#define CONFIG_RTC_PCF8563 /* enable Philips PCF8563 RTC */
|
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */
|
||||
#define CONFIG_SYS_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */
|
||||
#define CONFIG_SYS_I2C_DSPIC_IO_ADDR 0x57 /* PIC I/O addr */
|
||||
|
||||
#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_RTC_ADDR, \
|
||||
CONFIG_SYS_I2C_EEPROM_CPU_ADDR,\
|
||||
CONFIG_SYS_I2C_EEPROM_MB_ADDR, \
|
||||
CONFIG_SYS_I2C_DSPIC_ADDR, \
|
||||
CONFIG_SYS_I2C_DSPIC_2_ADDR, \
|
||||
CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,\
|
||||
CONFIG_SYS_I2C_DSPIC_IO_ADDR }
|
||||
|
||||
/*
|
||||
* Pass open firmware flat tree
|
||||
*/
|
||||
#define CONFIG_OF_LIBFDT
|
||||
#define CONFIG_OF_BOARD_SETUP
|
||||
/* Update size in "reg" property of NOR FLASH device tree nodes */
|
||||
#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
|
||||
|
||||
#define CONFIG_FIT /* enable FIT image support */
|
||||
|
||||
#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */
|
||||
|
||||
#define CONFIG_PREBOOT "setenv bootdelay 15"
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"hostname=lwmon5\0" \
|
||||
"netdev=eth0\0" \
|
||||
"unlock=yes\0" \
|
||||
"logversion=2\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
":${hostname}:${netdev}:off panic=1\0" \
|
||||
"addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\
|
||||
"addmisc=setenv bootargs ${bootargs} rtc-pcf8563.probe=0,0x51\0"\
|
||||
"flash_nfs=run nfsargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr}\0" \
|
||||
"flash_self=run ramargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
||||
"net_nfs=tftp 200000 ${bootfile};" \
|
||||
"run nfsargs addip addtty addmisc;bootm\0" \
|
||||
"rootpath=/opt/eldk/ppc_4xxFP\0" \
|
||||
"bootfile=/tftpboot/lwmon5/uImage\0" \
|
||||
"kernel_addr=FC000000\0" \
|
||||
"ramdisk_addr=FC180000\0" \
|
||||
"load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \
|
||||
"update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \
|
||||
"cp.b 200000 FFF80000 80000\0" \
|
||||
"upd=run load update\0" \
|
||||
"lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \
|
||||
"autoscr 200000\0" \
|
||||
""
|
||||
#define CONFIG_BOOTCOMMAND "run flash_self"
|
||||
|
||||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
#define CONFIG_PPC4xx_EMAC
|
||||
#define CONFIG_IBM_EMAC4_V4 1
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */
|
||||
|
||||
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
|
||||
#define CONFIG_PHY_RESET_DELAY 300
|
||||
|
||||
#define CONFIG_HAS_ETH0
|
||||
#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
|
||||
|
||||
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
|
||||
#define CONFIG_PHY1_ADDR 1
|
||||
|
||||
/* Video console */
|
||||
#define CONFIG_VIDEO
|
||||
#define CONFIG_VIDEO_MB862xx
|
||||
#define CONFIG_VIDEO_MB862xx_ACCEL
|
||||
#define CONFIG_CFB_CONSOLE
|
||||
#define CONFIG_VIDEO_LOGO
|
||||
#define CONFIG_CONSOLE_EXTRA_INFO
|
||||
#define VIDEO_FB_16BPP_PIXEL_SWAP
|
||||
#define VIDEO_FB_16BPP_WORD_SWAP
|
||||
|
||||
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
||||
#define CONFIG_VIDEO_SW_CURSOR
|
||||
#define CONFIG_SPLASH_SCREEN
|
||||
|
||||
#ifndef CONFIG_LCD4_LWMON5
|
||||
/*
|
||||
* USB/EHCI
|
||||
*/
|
||||
#define CONFIG_USB_EHCI /* Enable EHCI USB support */
|
||||
#define CONFIG_USB_EHCI_PPC4XX /* on PPC4xx platform */
|
||||
#define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300
|
||||
#define CONFIG_EHCI_MMIO_BIG_ENDIAN
|
||||
#define CONFIG_EHCI_DESC_BIG_ENDIAN
|
||||
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
|
||||
#define CONFIG_USB_STORAGE
|
||||
|
||||
/* Partitions */
|
||||
#define CONFIG_MAC_PARTITION
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_ISO_PARTITION
|
||||
#endif
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#define CONFIG_CMD_ASKENV
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_DIAG
|
||||
#define CONFIG_CMD_EEPROM
|
||||
#define CONFIG_CMD_ELF
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_IRQ
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_REGINFO
|
||||
#define CONFIG_CMD_SDRAM
|
||||
|
||||
#ifdef CONFIG_VIDEO
|
||||
#define CONFIG_CMD_BMP
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_LCD4_LWMON5
|
||||
#ifdef CONFIG_440EPX
|
||||
#define CONFIG_CMD_USB
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SUPPORT_VFAT
|
||||
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
|
||||
#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
||||
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
||||
#define CONFIG_LOOPW 1 /* enable loopw command */
|
||||
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
|
||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
||||
|
||||
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
|
||||
|
||||
#ifndef CONFIG_LCD4_LWMON5
|
||||
#ifndef DEBUG
|
||||
#define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */
|
||||
#endif
|
||||
#define CONFIG_WD_PERIOD 40000 /* in usec */
|
||||
#define CONFIG_WD_MAX_RATE 66600 /* in ticks */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 16 MB of memory, since this is
|
||||
* the maximum mapped by the 40x Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */
|
||||
#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
|
||||
|
||||
/*
|
||||
* External Bus Controller (EBC) Setup
|
||||
*/
|
||||
#define CONFIG_SYS_FLASH CONFIG_SYS_FLASH_BASE
|
||||
|
||||
/* Memory Bank 0 (NOR-FLASH) initialization */
|
||||
#define CONFIG_SYS_EBC_PB0AP 0x03000280
|
||||
#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH | 0xfc000)
|
||||
|
||||
/* Memory Bank 1 (Lime) initialization */
|
||||
#define CONFIG_SYS_EBC_PB1AP 0x01004380
|
||||
#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_LIME_BASE_0 | 0xbc000)
|
||||
|
||||
/* Memory Bank 2 (FPGA) initialization */
|
||||
#define CONFIG_SYS_EBC_PB2AP 0x01004400
|
||||
#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FPGA_BASE_0 | 0x1c000)
|
||||
|
||||
/* Memory Bank 3 (FPGA2) initialization */
|
||||
#define CONFIG_SYS_EBC_PB3AP 0x01004400
|
||||
#define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_FPGA_BASE_1 | 0x1c000)
|
||||
|
||||
#define CONFIG_SYS_EBC_CFG 0xb8400000
|
||||
|
||||
/*
|
||||
* Graphics (Fujitsu Lime)
|
||||
*/
|
||||
/* SDRAM Clock frequency adjustment register */
|
||||
#define CONFIG_SYS_LIME_SDRAM_CLOCK 0xC1FC0038
|
||||
#if 1 /* 133MHz is not tested enough, use 100MHz for now */
|
||||
/* Lime Clock frequency is to set 100MHz */
|
||||
#define CONFIG_SYS_LIME_CLOCK_100MHZ 0x00000
|
||||
#else
|
||||
/* Lime Clock frequency for 133MHz */
|
||||
#define CONFIG_SYS_LIME_CLOCK_133MHZ 0x10000
|
||||
#endif
|
||||
|
||||
/* SDRAM Parameter register */
|
||||
#define CONFIG_SYS_LIME_MMR 0xC1FCFFFC
|
||||
/*
|
||||
* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars
|
||||
* and pixel flare on display when 133MHz was configured. According to
|
||||
* SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed
|
||||
* Grade
|
||||
*/
|
||||
#ifdef CONFIG_SYS_LIME_CLOCK_133MHZ
|
||||
#define CONFIG_SYS_MB862xx_MMR 0x414FB7F3
|
||||
#define CONFIG_SYS_MB862xx_CCF CONFIG_SYS_LIME_CLOCK_133MHZ
|
||||
#else
|
||||
#define CONFIG_SYS_MB862xx_MMR 0x414FB7F2
|
||||
#define CONFIG_SYS_MB862xx_CCF CONFIG_SYS_LIME_CLOCK_100MHZ
|
||||
#endif
|
||||
|
||||
/*
|
||||
* GPIO Setup
|
||||
*/
|
||||
#define CONFIG_SYS_GPIO_PHY1_RST 12
|
||||
#define CONFIG_SYS_GPIO_FLASH_WP 14
|
||||
#define CONFIG_SYS_GPIO_PHY0_RST 22
|
||||
#define CONFIG_SYS_GPIO_PERM_VOLT_FEED 49
|
||||
#define CONFIG_SYS_GPIO_DSPIC_READY 51
|
||||
#define CONFIG_SYS_GPIO_CAN_ENABLE 53
|
||||
#define CONFIG_SYS_GPIO_LSB_ENABLE 54
|
||||
#define CONFIG_SYS_GPIO_EEPROM_EXT_WP 55
|
||||
#define CONFIG_SYS_GPIO_HIGHSIDE 56
|
||||
#define CONFIG_SYS_GPIO_EEPROM_INT_WP 57
|
||||
#define CONFIG_SYS_GPIO_BOARD_RESET 58
|
||||
#define CONFIG_SYS_GPIO_LIME_S 59
|
||||
#define CONFIG_SYS_GPIO_LIME_RST 60
|
||||
#define CONFIG_SYS_GPIO_SYSMON_STATUS 62
|
||||
#define CONFIG_SYS_GPIO_WATCHDOG 63
|
||||
|
||||
/* On LCD4, GPIO49 has to be configured to 0 instead of 1 */
|
||||
#ifdef CONFIG_LCD4_LWMON5
|
||||
#define GPIO49_VAL 0
|
||||
#else
|
||||
#define GPIO49_VAL 1
|
||||
#endif
|
||||
|
||||
/*
|
||||
* PPC440 GPIO Configuration
|
||||
*/
|
||||
#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
|
||||
{ \
|
||||
/* GPIO Core 0 */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO15 */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMCTxD(7) */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 GMCTxD(2) */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 GMCTxD(3) */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \
|
||||
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \
|
||||
{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \
|
||||
}, \
|
||||
{ \
|
||||
/* GPIO Core 1 */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO49_VAL}, /* GPIO49 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \
|
||||
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
|
||||
} \
|
||||
}
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* SPL related defines
|
||||
*/
|
||||
#ifdef CONFIG_LCD4_LWMON5
|
||||
#define CONFIG_SPL_FRAMEWORK
|
||||
#define CONFIG_SPL_BOARD_INIT
|
||||
#define CONFIG_SPL_NOR_SUPPORT
|
||||
#define CONFIG_SPL_TEXT_BASE 0xffff0000 /* last 64 KiB for SPL */
|
||||
#define CONFIG_SYS_SPL_MAX_LEN (64 << 10)
|
||||
#define CONFIG_UBOOT_PAD_TO 458752 /* decimal for 'dd' */
|
||||
#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
|
||||
#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
|
||||
#define CONFIG_SPL_SERIAL_SUPPORT
|
||||
|
||||
/* Place BSS for SPL near end of SDRAM */
|
||||
#define CONFIG_SPL_BSS_START_ADDR ((256 - 1) << 20)
|
||||
#define CONFIG_SPL_BSS_MAX_SIZE (64 << 10)
|
||||
|
||||
#define CONFIG_SPL_OS_BOOT
|
||||
/* Place patched DT blob (fdt) at this address */
|
||||
#define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000
|
||||
|
||||
#define CONFIG_SPL_TARGET "u-boot-img-spl-at-end.bin"
|
||||
|
||||
/* Settings for real U-Boot to be loaded from NOR flash */
|
||||
#define CONFIG_SYS_UBOOT_BASE (-CONFIG_SYS_MONITOR_LEN)
|
||||
#define CONFIG_SYS_UBOOT_START 0x01002100
|
||||
|
||||
#define CONFIG_SYS_OS_BASE 0xf8000000
|
||||
#define CONFIG_SYS_FDT_BASE 0xf87c0000
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue
Block a user