am335x evm: Initial support for AM335x GP EVM Profiles
The AM335x GP EVM can have one of 8 different profiles selected. Each profile has a different set of peripherals and requires different pinmux configurations that conflict with other profiles. i2c1 is an example of a conflicted mux currently. Signed-off-by: Tom Rini <trini@ti.com>
This commit is contained in:
parent
38d4a6042b
commit
036fd65a8c
@ -17,6 +17,7 @@
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/io.h>
|
||||
#include <i2c.h>
|
||||
|
||||
#define MUX_CFG(value, offset) \
|
||||
__raw_writel(value, (CTRL_BASE + offset));
|
||||
@ -364,22 +365,59 @@ void enable_i2c0_pin_mux(void)
|
||||
configure_module_pin_mux(i2c0_pin_mux);
|
||||
}
|
||||
|
||||
/*
|
||||
* The AM335x GP EVM, if daughter card(s) are connected, can have 8
|
||||
* different profiles. These profiles determine what peripherals are
|
||||
* valid and need pinmux to be configured.
|
||||
*/
|
||||
#define PROFILE_NONE 0x0
|
||||
#define PROFILE_0 (1 << 0)
|
||||
#define PROFILE_1 (1 << 1)
|
||||
#define PROFILE_2 (1 << 2)
|
||||
#define PROFILE_3 (1 << 3)
|
||||
#define PROFILE_4 (1 << 4)
|
||||
#define PROFILE_5 (1 << 5)
|
||||
#define PROFILE_6 (1 << 6)
|
||||
#define PROFILE_7 (1 << 7)
|
||||
#define PROFILE_MASK 0x7
|
||||
#define PROFILE_ALL 0xFF
|
||||
|
||||
/* CPLD registers */
|
||||
#define I2C_CPLD_ADDR 0x35
|
||||
#define CFG_REG 0x10
|
||||
|
||||
static unsigned short detect_daughter_board_profile(void)
|
||||
{
|
||||
unsigned short val;
|
||||
|
||||
if (i2c_probe(I2C_CPLD_ADDR))
|
||||
return PROFILE_NONE;
|
||||
|
||||
if (i2c_read(I2C_CPLD_ADDR, CFG_REG, 1, (unsigned char *)(&val), 2))
|
||||
return PROFILE_NONE;
|
||||
|
||||
return (1 << (val & PROFILE_MASK));
|
||||
}
|
||||
|
||||
void enable_board_pin_mux(struct am335x_baseboard_id *header)
|
||||
{
|
||||
/* Enable pinmux that is common to all TI boards. */
|
||||
configure_module_pin_mux(i2c1_pin_mux);
|
||||
|
||||
/* Now do board-specific muxes. */
|
||||
/* Do board-specific muxes. */
|
||||
if (!strncmp(header->name, "A335BONE", HDR_NAME_LEN)) {
|
||||
/* Beaglebone pinmux */
|
||||
configure_module_pin_mux(i2c1_pin_mux);
|
||||
configure_module_pin_mux(mii1_pin_mux);
|
||||
configure_module_pin_mux(mmc0_pin_mux);
|
||||
} else if (!strncmp(header->config, "SKU#01", 6)) {
|
||||
/* General Purpose EVM */
|
||||
unsigned short profile = detect_daughter_board_profile();
|
||||
configure_module_pin_mux(rgmii1_pin_mux);
|
||||
configure_module_pin_mux(mmc0_pin_mux);
|
||||
/* In profile #2 i2c1 and spi0 conflict. */
|
||||
if (profile & ~PROFILE_2)
|
||||
configure_module_pin_mux(i2c1_pin_mux);
|
||||
} else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) {
|
||||
/* Starter Kit EVM */
|
||||
configure_module_pin_mux(i2c1_pin_mux);
|
||||
configure_module_pin_mux(gpio0_7_pin_mux);
|
||||
configure_module_pin_mux(rgmii1_pin_mux);
|
||||
configure_module_pin_mux(mmc0_pin_mux_sk_evm);
|
||||
|
Loading…
Reference in New Issue
Block a user