arm64: mvebu: Add Armada 3700 db-88f3720 development board support
This patch adds basic support for the Marvell Armada 3700 DB-88F3720 development board. Supported are the following interfaces: - UART - SPI (incl. SPI NOR) - I2C - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
This commit is contained in:
Stefan Roese
parent
f61aefc150
commit
01e62c7f11
@ -56,6 +56,10 @@ config TARGET_CLEARFOG
|
||||
bool "Support ClearFog"
|
||||
select 88F6820
|
||||
|
||||
config TARGET_MVEBU_DB_88F3720
|
||||
bool "Support DB-88F3720 Armada 3720"
|
||||
select ARMADA_3700
|
||||
|
||||
config TARGET_DB_88F6720
|
||||
bool "Support DB-88F6720 Armada 375"
|
||||
select ARMADA_375
|
||||
@ -88,6 +92,7 @@ endchoice
|
||||
|
||||
config SYS_BOARD
|
||||
default "clearfog" if TARGET_CLEARFOG
|
||||
default "mvebu_db-88f3720" if TARGET_MVEBU_DB_88F3720
|
||||
default "db-88f6720" if TARGET_DB_88F6720
|
||||
default "db-88f6820-gp" if TARGET_DB_88F6820_GP
|
||||
default "db-88f6820-amc" if TARGET_DB_88F6820_AMC
|
||||
@ -98,6 +103,7 @@ config SYS_BOARD
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "clearfog" if TARGET_CLEARFOG
|
||||
default "mvebu_db-88f3720" if TARGET_MVEBU_DB_88F3720
|
||||
default "db-88f6720" if TARGET_DB_88F6720
|
||||
default "db-88f6820-gp" if TARGET_DB_88F6820_GP
|
||||
default "db-88f6820-amc" if TARGET_DB_88F6820_AMC
|
||||
@ -108,6 +114,7 @@ config SYS_CONFIG_NAME
|
||||
|
||||
config SYS_VENDOR
|
||||
default "Marvell" if TARGET_DB_MV784MP_GP
|
||||
default "Marvell" if TARGET_MVEBU_DB_88F3720
|
||||
default "Marvell" if TARGET_DB_88F6720
|
||||
default "Marvell" if TARGET_DB_88F6820_GP
|
||||
default "Marvell" if TARGET_DB_88F6820_AMC
|
||||
|
||||
6
board/Marvell/mvebu_db-88f3720/MAINTAINERS
Normal file
6
board/Marvell/mvebu_db-88f3720/MAINTAINERS
Normal file
@ -0,0 +1,6 @@
|
||||
MVEBU_DB_88F3720 BOARD
|
||||
M: Stefan Roese <sr@denx.de>
|
||||
S: Maintained
|
||||
F: board/Marvell/mvebu_db-88f3720/
|
||||
F: include/configs/mvebu_db-88f3720.h
|
||||
F: configs/mvebu_db-88f3720_defconfig
|
||||
7
board/Marvell/mvebu_db-88f3720/Makefile
Normal file
7
board/Marvell/mvebu_db-88f3720/Makefile
Normal file
@ -0,0 +1,7 @@
|
||||
#
|
||||
# Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := board.o
|
||||
134
board/Marvell/mvebu_db-88f3720/board.c
Normal file
134
board/Marvell/mvebu_db-88f3720/board.c
Normal file
@ -0,0 +1,134 @@
|
||||
/*
|
||||
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <i2c.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/soc.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
/* IO expander I2C device */
|
||||
#define I2C_IO_EXP_ADDR 0x22
|
||||
#define I2C_IO_CFG_REG_0 0x6
|
||||
#define I2C_IO_DATA_OUT_REG_0 0x2
|
||||
#define I2C_IO_REG_0_SATA_OFF 2
|
||||
#define I2C_IO_REG_0_USB_H_OFF 1
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
/* Nothing to do (yet), perhaps later some pin-muxing etc */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* adress of boot parameters */
|
||||
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Board specific AHCI / SATA enable code */
|
||||
int board_ahci_enable(void)
|
||||
{
|
||||
struct udevice *dev;
|
||||
int ret;
|
||||
u8 buf[8];
|
||||
|
||||
/* Configure IO exander PCA9555: 7bit address 0x22 */
|
||||
ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev);
|
||||
if (ret) {
|
||||
printf("Cannot find PCA9555: %d\n", ret);
|
||||
return 0;
|
||||
}
|
||||
|
||||
ret = dm_i2c_read(dev, I2C_IO_CFG_REG_0, buf, 1);
|
||||
if (ret) {
|
||||
printf("Failed to read IO expander value via I2C\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
/*
|
||||
* Enable SATA power via IO expander connected via I2C by setting
|
||||
* the corresponding bit to output mode to enable power for SATA
|
||||
*/
|
||||
buf[0] &= ~(1 << I2C_IO_REG_0_SATA_OFF);
|
||||
ret = dm_i2c_write(dev, I2C_IO_CFG_REG_0, buf, 1);
|
||||
if (ret) {
|
||||
printf("Failed to set IO expander via I2C\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Board specific xHCI enable code */
|
||||
int board_xhci_enable(void)
|
||||
{
|
||||
struct udevice *dev;
|
||||
int ret;
|
||||
u8 buf[8];
|
||||
|
||||
/* Configure IO exander PCA9555: 7bit address 0x22 */
|
||||
ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev);
|
||||
if (ret) {
|
||||
printf("Cannot find PCA9555: %d\n", ret);
|
||||
return 0;
|
||||
}
|
||||
|
||||
printf("Enable USB VBUS\n");
|
||||
|
||||
/*
|
||||
* Read configuration (direction) and set VBUS pin as output
|
||||
* (reset pin = output)
|
||||
*/
|
||||
ret = dm_i2c_read(dev, I2C_IO_CFG_REG_0, buf, 1);
|
||||
if (ret) {
|
||||
printf("Failed to read IO expander value via I2C\n");
|
||||
return -EIO;
|
||||
}
|
||||
buf[0] &= ~(1 << I2C_IO_REG_0_USB_H_OFF);
|
||||
ret = dm_i2c_write(dev, I2C_IO_CFG_REG_0, buf, 1);
|
||||
if (ret) {
|
||||
printf("Failed to set IO expander via I2C\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
/* Read VBUS output value and disable it */
|
||||
ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
|
||||
if (ret) {
|
||||
printf("Failed to read IO expander value via I2C\n");
|
||||
return -EIO;
|
||||
}
|
||||
buf[0] &= ~(1 << I2C_IO_REG_0_USB_H_OFF);
|
||||
ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
|
||||
if (ret) {
|
||||
printf("Failed to set IO expander via I2C\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
/*
|
||||
* Required delay for configuration to settle - must wait for
|
||||
* power on port is disabled in case VBUS signal was high,
|
||||
* required 3 seconds delay to let VBUS signal fully settle down
|
||||
*/
|
||||
mdelay(3000);
|
||||
|
||||
/* Enable VBUS power: Set output value of VBUS pin as enabled */
|
||||
buf[0] |= (1 << I2C_IO_REG_0_USB_H_OFF);
|
||||
ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
|
||||
if (ret) {
|
||||
printf("Failed to set IO expander via I2C\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
mdelay(500); /* required delay to let output value settle */
|
||||
|
||||
return 0;
|
||||
}
|
||||
49
configs/mvebu_db-88f3720_defconfig
Normal file
49
configs/mvebu_db-88f3720_defconfig
Normal file
@ -0,0 +1,49 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MVEBU=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x2000
|
||||
CONFIG_TARGET_MVEBU_DB_88F3720=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="armada-3720-db"
|
||||
CONFIG_AHCI=y
|
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_FPGA is not set
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_TFTPPUT=y
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_MII=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_BLOCK_CACHE=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_DM_I2C_COMPAT=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_MVEBU_COMPHY_SUPPORT=y
|
||||
# CONFIG_SPL_SERIAL_PRESENT is not set
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_DEBUG_MVEBU_A3700_UART=y
|
||||
CONFIG_DEBUG_UART_BASE=0xd0012000
|
||||
CONFIG_DEBUG_UART_CLOCK=25804800
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_MVEBU_A3700_UART=y
|
||||
CONFIG_MVEBU_A3700_SPI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
144
include/configs/mvebu_db-88f3720.h
Normal file
144
include/configs/mvebu_db-88f3720.h
Normal file
@ -0,0 +1,144 @@
|
||||
/*
|
||||
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef _CONFIG_MVEBU_DB_88F3720_H
|
||||
#define _CONFIG_MVEBU_DB_88F3720_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options (easy to change)
|
||||
*/
|
||||
#define CONFIG_DISPLAY_BOARDINFO_LATE
|
||||
#define CONFIG_ARCH_EARLY_INIT_R
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0x00000000
|
||||
|
||||
/* additions for new ARM relocation support */
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
||||
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
|
||||
/* auto boot */
|
||||
#define CONFIG_PREBOOT
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
|
||||
115200, 230400, 460800, 921600 }
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||||
#define CONFIG_INITRD_TAG /* enable INITRD tag */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
|
||||
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
|
||||
+sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
|
||||
|
||||
/*
|
||||
* Other required minimal configurations
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
|
||||
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
|
||||
#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
|
||||
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
|
||||
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
|
||||
|
||||
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
|
||||
#define CONFIG_SYS_ALT_MEMTEST
|
||||
|
||||
/* End of 16M scrubbed by training in bootrom */
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
|
||||
|
||||
/*
|
||||
* I2C
|
||||
*/
|
||||
#define CONFIG_I2C_MV
|
||||
#define CONFIG_SYS_I2C_SLAVE 0x0
|
||||
|
||||
/*
|
||||
* SPI Flash configuration
|
||||
*/
|
||||
#define CONFIG_ENV_SPI_BUS 0
|
||||
#define CONFIG_ENV_SPI_CS 0
|
||||
|
||||
/* SPI NOR flash default params, used by sf commands */
|
||||
#define CONFIG_SF_DEFAULT_SPEED 1000000
|
||||
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
||||
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
|
||||
|
||||
/* Environment in SPI NOR flash */
|
||||
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
|
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||||
#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
|
||||
#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
|
||||
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
|
||||
|
||||
/*
|
||||
* Ethernet Driver configuration
|
||||
*/
|
||||
#define CONFIG_MVNETA /* Enable Marvell Gbe Controller Driver */
|
||||
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
|
||||
#define CONFIG_PHY_GIGE /* GbE speed/duplex detect */
|
||||
#define CONFIG_ARP_TIMEOUT 200
|
||||
#define CONFIG_NET_RETRY_COUNT 50
|
||||
|
||||
/* USB 2.0 */
|
||||
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
|
||||
|
||||
/* USB 3.0 */
|
||||
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
|
||||
|
||||
#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
|
||||
CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
|
||||
|
||||
/* USB ethernet */
|
||||
#define CONFIG_USB_HOST_ETHER
|
||||
#define CONFIG_USB_ETHER_ASIX
|
||||
#define CONFIG_USB_ETHER_MCS7830
|
||||
#define CONFIG_USB_ETHER_RTL8152
|
||||
#define CONFIG_USB_ETHER_SMSC95XX
|
||||
|
||||
/*
|
||||
* SATA/SCSI/AHCI configuration
|
||||
*/
|
||||
#define CONFIG_SCSI
|
||||
#define CONFIG_SCSI_AHCI
|
||||
#define CONFIG_SCSI_AHCI_PLAT
|
||||
#define CONFIG_LIBATA
|
||||
#define CONFIG_LBA48
|
||||
#define CONFIG_SYS_64BIT_LBA
|
||||
|
||||
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
|
||||
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
||||
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
|
||||
CONFIG_SYS_SCSI_MAX_LUN)
|
||||
|
||||
#define CONFIG_SUPPORT_VFAT
|
||||
|
||||
/* DISK Partition support */
|
||||
#define CONFIG_EFI_PARTITION
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_MAC_PARTITION
|
||||
#define CONFIG_ISO_PARTITION /* Experimental */
|
||||
|
||||
#define CONFIG_CMD_PART
|
||||
#define CONFIG_PARTITION_UUIDS
|
||||
|
||||
#endif /* _CONFIG_MVEBU_DB_88F3720_H */
|
||||
Loading…
Reference in New Issue
Block a user