leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d498c67054
u-boot/drivers/mmc/mmc_private.h

136 lines
3.1 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
mmc: don't support write & erase for SPL builds For SPL builds this is just dead code since we'll only need to read. Eliminating it results in a significant size reduction for the SPL binary, which may be critical for certain platforms where the binary size is highly constrained. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-09 14:30:26 +00:00
/*
* Copyright 2008,2010 Freescale Semiconductor, Inc
Move eSDHC adapter card identification to board files The eSDHC adapter card identification and multiplexing configuration through FPGA had been implemented in both common mmc driver and fsl_esdhc driver. However it is proper to move these code to board files and do it during board initialization. The FPGA registers are also board specific. This patch is to move eSDHC adapter card identification and multiplexing configuration from mmc driver to specific board files. And the option CONFIG_FSL_ESDHC_ADAPTER_IDENT is no longer needed. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [Rebased, Removed T1040QDS change as board does not exist] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-17 10:08:58 +00:00
* Copyright 2020 NXP
mmc: don't support write & erase for SPL builds For SPL builds this is just dead code since we'll only need to read. Eliminating it results in a significant size reduction for the SPL binary, which may be critical for certain platforms where the binary size is highly constrained. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-09 14:30:26 +00:00
* Andy Fleming
*
* Based (loosely) on the Linux code
*/
#ifndef _MMC_PRIVATE_H_
#define _MMC_PRIVATE_H_
#include <mmc.h>
mmc: add mmc_poll_for_busy() and change the purpose of mmc_send_status() mmc_send_status() is currently used to poll the card until it is ready, not actually returning the status of the card. Make it return the status and add another function to poll the card. Also remove the 'extern' declaration in the mmc-private.h header to comply with the coding standard. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-02 08:53:52 +00:00
int mmc_send_status(struct mmc *mmc, unsigned int *status);
int mmc_poll_for_busy(struct mmc *mmc, int timeout);
int mmc_set_blocklen(struct mmc *mmc, int len);
mmc: don't support write & erase for SPL builds For SPL builds this is just dead code since we'll only need to read. Eliminating it results in a significant size reduction for the SPL binary, which may be critical for certain platforms where the binary size is highly constrained. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-09 14:30:26 +00:00
dm: mmc: Allow disabling driver model in SPL At present if U-Boot proper uses driver model for MMC, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. Add new SPL versions of the options for DM_MMC, DM_MMC_OPS and BLK. By default these follow their non-SPL versions, but this can be changed by boards which need it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-04 19:31:19 +00:00
#if CONFIG_IS_ENABLED(BLK)
mmc: Add function declarations for mmc_bread() and mmc_switch_part() These private functions are used both in the driver-model implementation and in the legacy code. Add them to the header. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-06-13 05:30:15 +00:00
ulong mmc_bread(struct udevice *dev, lbaint_t start, lbaint_t blkcnt,
void *dst);
#else
ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
void *dst);
#endif
mmc: add a Kconfig option to enable the support for MMC write operations This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code needed only if write support is required. The option is added for u-boot and for SPL Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-04 14:23:32 +00:00
#if CONFIG_IS_ENABLED(MMC_WRITE)
mmc: don't support write & erase for SPL builds For SPL builds this is just dead code since we'll only need to read. Eliminating it results in a significant size reduction for the SPL binary, which may be critical for certain platforms where the binary size is highly constrained. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-09 14:30:26 +00:00
dm: mmc: Allow disabling driver model in SPL At present if U-Boot proper uses driver model for MMC, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. Add new SPL versions of the options for DM_MMC, DM_MMC_OPS and BLK. By default these follow their non-SPL versions, but this can be changed by boards which need it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-04 19:31:19 +00:00
#if CONFIG_IS_ENABLED(BLK)
dm: mmc: Add support for driver-model block devices Add support for enabling CONFIG_BLK with MMC. This involves changing a few functions to use struct udevice and adding a MMC block device driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-01 19:52:41 +00:00
ulong mmc_bwrite(struct udevice *dev, lbaint_t start, lbaint_t blkcnt,
const void *src);
dm: mmc: Support erase At present erase is not suported with CONFIG_DM_OPS. Add it so that MMC devices can be erased. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-01 20:43:17 +00:00
ulong mmc_berase(struct udevice *dev, lbaint_t start, lbaint_t blkcnt);
dm: mmc: Add support for driver-model block devices Add support for enabling CONFIG_BLK with MMC. This involves changing a few functions to use struct udevice and adding a MMC block device driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-01 19:52:41 +00:00
#else
ulong mmc_bwrite(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
const void *src);
dm: mmc: Support erase At present erase is not suported with CONFIG_DM_OPS. Add it so that MMC devices can be erased. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-01 20:43:17 +00:00
ulong mmc_berase(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt);
dm: mmc: Add support for driver-model block devices Add support for enabling CONFIG_BLK with MMC. This involves changing a few functions to use struct udevice and adding a MMC block device driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-01 19:52:41 +00:00
#endif
mmc: don't support write & erase for SPL builds For SPL builds this is just dead code since we'll only need to read. Eliminating it results in a significant size reduction for the SPL binary, which may be critical for certain platforms where the binary size is highly constrained. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-09 14:30:26 +00:00
mmc: add a Kconfig option to enable the support for MMC write operations This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code needed only if write support is required. The option is added for u-boot and for SPL Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-04 14:23:32 +00:00
#else /* CONFIG_SPL_MMC_WRITE is not defined */
mmc: don't support write & erase for SPL builds For SPL builds this is just dead code since we'll only need to read. Eliminating it results in a significant size reduction for the SPL binary, which may be critical for certain platforms where the binary size is highly constrained. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-09 14:30:26 +00:00
spl: saveenv: adding saveenv support in SPL By default saveenv option is not supported for SPL. This patch enable the support for save environment variable for SPL build. Enable save environment support in SPL after setenv. By default the saveenv option is not provided in SPL, but some boards need this support in 'Falcon' boot, where SPL need to boot from different images based on environment variable set by OS. For example OS may set "reboot_image" environment variable to "recovery" inorder to boot recovery image by SPL. The SPL read "reboot_image" and act accordingly and change the reboot_image to default mode using setenv and save the environemnt. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Simon Glass <sig@chromium.org> change in v1: - dropped SUPPORT, use CONFIG_SPL_SAVEENV - updates the comments in mmc_private.h
2016-09-28 09:16:18 +00:00
/* declare dummies to reduce code size. */
mmc: don't support write & erase for SPL builds For SPL builds this is just dead code since we'll only need to read. Eliminating it results in a significant size reduction for the SPL binary, which may be critical for certain platforms where the binary size is highly constrained. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-09 14:30:26 +00:00
dm: mmc: Allow disabling driver model in SPL At present if U-Boot proper uses driver model for MMC, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. Add new SPL versions of the options for DM_MMC, DM_MMC_OPS and BLK. By default these follow their non-SPL versions, but this can be changed by boards which need it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-04 19:31:19 +00:00
#if CONFIG_IS_ENABLED(BLK)
dm: mmc: Fix up mmc_bread/bwrite() prototypes for SPL When these functions are not compiled in, we still need to declare the correct function signature to avoid a build warnings in SPL. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-14 20:03:09 +00:00
static inline unsigned long mmc_berase(struct udevice *dev,
lbaint_t start, lbaint_t blkcnt)
{
return 0;
}
static inline ulong mmc_bwrite(struct udevice *dev, lbaint_t start,
lbaint_t blkcnt, const void *src)
{
return 0;
}
#else
dm: Drop the block_dev_desc_t typedef Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long and causes 80-column violations, rename it to struct blk_desc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-02-29 22:25:34 +00:00
static inline unsigned long mmc_berase(struct blk_desc *block_dev,
block: pass block dev not num to read/write/erase() This will allow the implementation to make use of data in the block_dev structure beyond the base device number. This will be useful so that eMMC block devices can encompass the HW partition ID rather than treating this out-of-band. Equally, the existence of the priv field is crying out for this patch to exist. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-12-07 18:38:48 +00:00
lbaint_t start, lbaint_t blkcnt)
mmc: don't support write & erase for SPL builds For SPL builds this is just dead code since we'll only need to read. Eliminating it results in a significant size reduction for the SPL binary, which may be critical for certain platforms where the binary size is highly constrained. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-09 14:30:26 +00:00
{
return 0;
}
dm: Drop the block_dev_desc_t typedef Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long and causes 80-column violations, rename it to struct blk_desc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-02-29 22:25:34 +00:00
static inline ulong mmc_bwrite(struct blk_desc *block_dev, lbaint_t start,
block: pass block dev not num to read/write/erase() This will allow the implementation to make use of data in the block_dev structure beyond the base device number. This will be useful so that eMMC block devices can encompass the HW partition ID rather than treating this out-of-band. Equally, the existence of the priv field is crying out for this patch to exist. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-12-07 18:38:48 +00:00
lbaint_t blkcnt, const void *src)
mmc: don't support write & erase for SPL builds For SPL builds this is just dead code since we'll only need to read. Eliminating it results in a significant size reduction for the SPL binary, which may be critical for certain platforms where the binary size is highly constrained. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-09 14:30:26 +00:00
{
return 0;
}
dm: mmc: Fix up mmc_bread/bwrite() prototypes for SPL When these functions are not compiled in, we still need to declare the correct function signature to avoid a build warnings in SPL. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-14 20:03:09 +00:00
#endif
mmc: don't support write & erase for SPL builds For SPL builds this is just dead code since we'll only need to read. Eliminating it results in a significant size reduction for the SPL binary, which may be critical for certain platforms where the binary size is highly constrained. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-09 14:30:26 +00:00
#endif /* CONFIG_SPL_BUILD */
mmc: Move tracing code into separate functions Move this code into separate functions so that it can be used from the uclass also. Add static inline versions for when the option is disabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-06-13 05:30:20 +00:00
#ifdef CONFIG_MMC_TRACE
void mmmc_trace_before_send(struct mmc *mmc, struct mmc_cmd *cmd);
void mmmc_trace_after_send(struct mmc *mmc, struct mmc_cmd *cmd, int ret);
void mmc_trace_state(struct mmc *mmc, struct mmc_cmd *cmd);
#else
static inline void mmmc_trace_before_send(struct mmc *mmc, struct mmc_cmd *cmd)
{
}
static inline void mmmc_trace_after_send(struct mmc *mmc, struct mmc_cmd *cmd,
int ret)
{
}
static inline void mmc_trace_state(struct mmc *mmc, struct mmc_cmd *cmd)
{
}
#endif
dm: mmc: Move the device list into a separate file At present the MMC subsystem maintains its own list of MMC devices. This cannot work with driver model, which needs to maintain this itself. Move the list code into a separate 'legacy' file. The core MMC code remains, and will be shared with the driver-model implementation. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-01 19:52:35 +00:00
/**
* mmc_get_next_devnum() - Get the next available MMC device number
*
doc: replace @return by Return: Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 17:05:50 +00:00
* Return: next available device number (0 = first), or -ve on error
dm: mmc: Move the device list into a separate file At present the MMC subsystem maintains its own list of MMC devices. This cannot work with driver model, which needs to maintain this itself. Move the list code into a separate 'legacy' file. The core MMC code remains, and will be shared with the driver-model implementation. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-01 19:52:35 +00:00
*/
int mmc_get_next_devnum(void);
/**
* mmc_do_preinit() - Get an MMC device ready for use
*/
void mmc_do_preinit(void);
/**
* mmc_list_init() - Set up the list of MMC devices
*/
void mmc_list_init(void);
/**
* mmc_list_add() - Add a new MMC device to the list of devices
*
* @mmc: Device to add
*/
void mmc_list_add(struct mmc *mmc);
mmc: Add function declarations for mmc_bread() and mmc_switch_part() These private functions are used both in the driver-model implementation and in the legacy code. Add them to the header. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-06-13 05:30:15 +00:00
/**
* mmc_switch_part() - Switch to a new MMC hardware partition
*
* @mmc: MMC device
* @part_num: Hardware partition number
doc: replace @return by Return: Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 17:05:50 +00:00
* Return: 0 if OK, -ve on error
mmc: Add function declarations for mmc_bread() and mmc_switch_part() These private functions are used both in the driver-model implementation and in the legacy code. Add them to the header. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-06-13 05:30:15 +00:00
*/
int mmc_switch_part(struct mmc *mmc, unsigned int part_num);
mmc: Move MMC boot code into its own file Rather than having an #ifdef in the main mmc.c file, control this feature from the Makefile by moving the code into its own file. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-06-13 05:30:18 +00:00
/**
* mmc_switch() - Issue and MMC switch mode command
*
* @mmc: MMC device
* @set: Unused
* @index: Cmdarg index
* @value: Cmdarg value
doc: replace @return by Return: Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 17:05:50 +00:00
* Return: 0 if OK, -ve on error
mmc: Move MMC boot code into its own file Rather than having an #ifdef in the main mmc.c file, control this feature from the Makefile by moving the code into its own file. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-06-13 05:30:18 +00:00
*/
int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value);
mmc: don't support write & erase for SPL builds For SPL builds this is just dead code since we'll only need to read. Eliminating it results in a significant size reduction for the SPL binary, which may be critical for certain platforms where the binary size is highly constrained. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-09 14:30:26 +00:00
#endif /* _MMC_PRIVATE_H_ */
Reference in New Issue Copy Permalink