leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b1255bc09e
u-boot/configs/xilinx_versal_virt_defconfig

97 lines
2.1 KiB
Plaintext
Raw Normal View History

arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_ARM=y
CONFIG_ARCH_VERSAL=y
CONFIG_SYS_TEXT_BASE=0x8000000
arm64: versal: Increase SYS_MALLOC_F_LEN This patch increases SYS_MALLOC_F_LEN as the versal clock driver needs to be probed before relocation itself inorder to get required clocks before relocation. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-02 11:14:17 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x100000
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_COUNTER_FREQUENCY=62500000
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
arm64: versal: Update boot delay to perform autoboot Update boot delay to 5 for performing autoboot. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-27 05:47:04 +00:00
CONFIG_BOOTDELAY=5
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_SUPPORT_RAW_INITRD=y
arm64: versal: Define board_late_init for versal Define board_late_init which performs bootmode detection and prepares corresponding distro boot commaand sequence. Also disable it for mini platforms because simply there is no need to have it enabled. But also disable it for virtual platform because Qemu is not modelling this register space that's why travis testing would fail. This configuration should be reverted when mainline Qemu is updated. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-31 11:58:14 +00:00
# CONFIG_BOARD_LATE_INIT is not set
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Versal> "
CONFIG_CMD_BOOTMENU=y
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST=y
arm64: versal: Enable CLK command Enables clock command for dumping clocks. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-23 06:54:59 +00:00
CONFIG_CMD_CLK=y
arm64: versal: Enable USB driver support This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 11:01:14 +00:00
CONFIG_CMD_DFU=y
arm64: versal: Enable dm command It is useful to have this command enable to see which devices are bind/probed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-16 15:52:19 +00:00
CONFIG_CMD_DM=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
# CONFIG_CMD_FLASH is not set
arm64: versal: Enable GPIO command for Versal Enable GPIO command for Xilinx Versal platform. Driver is updated that's why it can be used directly. Driver is enabled by default through Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 07:46:47 +00:00
CONFIG_CMD_GPIO=y
arm64: versal: Enable i2c cadence controller and i2c command Enable communication over i2c. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-16 15:50:17 +00:00
CONFIG_CMD_I2C=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
arm64: versal: Enable USB driver support This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 11:01:14 +00:00
CONFIG_CMD_USB=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_CMD_DHCP=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_PXE=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_PARTITION_UUIDS is not set
CONFIG_OF_BOARD=y
CONFIG_NET_RANDOM_ETHADDR=y
net: Convert CONFIG_IP_DEFRAG to Kconfig Convert CONFIG_IP_DEFRAG to Kconfig, update defconfigs, headers and whitelist. This patch is a follow-up on a patch by Christian Gmeiner with the added config/header/whitelist updates. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reported-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-11 02:51:14 +00:00
CONFIG_IP_DEFRAG=y
net: Convert CONFIG_TFTP_BLOCKSIZE to Kconfig Convert CONFIG_TFTP_BLOCKSIZE to Kconfig, update defconfigs, headers and whitelist. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-11 02:51:15 +00:00
CONFIG_TFTP_BLOCKSIZE=4096
arm64: versal: Enable clock driver Enable clock driver for Versal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-04 11:58:47 +00:00
CONFIG_CLK_VERSAL=y
arm64: versal: Enable USB driver support This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 11:01:14 +00:00
CONFIG_DFU_RAM=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_DM_GPIO=y
arm64: versal: Enable i2c cadence controller and i2c command Enable communication over i2c. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-16 15:50:17 +00:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
arm64: versal: Enable USB driver support This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 11:01:14 +00:00
CONFIG_MISC=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
arm64: versal: Enable different ethernet phy for virt platform This platform is going to become generic that's why it is necessary also enable different PHY vendors. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-17 08:22:37 +00:00
CONFIG_PHY_MARVELL=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_TI=y
CONFIG_PHY_VITESSE=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_PHY_FIXED=y
CONFIG_PHY_GIGE=y
CONFIG_MII=y
CONFIG_ZYNQ_GEM=y
CONFIG_PL01X_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
arm64: versal: Enable USB driver support This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 11:01:14 +00:00
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_ULPI=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_FUNCTION_THOR=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_FAT_WRITE=y
arm64: versal: Enable LIBFDT_OVERLAY Enable device tree overlay to build all dtbs for Versal with -@ flag to enable applying overlays. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-07 08:33:23 +00:00
CONFIG_OF_LIBFDT_OVERLAY=y
arm64: versal: Add Xilinx Versal Virtual QEMU board Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-18 12:58:16 +00:00
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
Reference in New Issue Copy Permalink