leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a26cd04920
u-boot/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig

25 lines
862 B
Plaintext
Raw Normal View History

sunxi: Add Ippo_q8h_v1_2_a33_1024x600 defconfig Add a defconfig for generic 7" tablets using the Ippo q8h v1.2 pcb, with an A33 SoC (the pcb can take an A23 or an A33), and a 1024x600 LCD. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-07 07:06:39 +00:00
# This is a defconfig for generic 7" tablets using the Ippo q8h v1.2 pcb,
# with an A33 SoC (the pcb can take an A23 or an A33), and a 1024x600 LCD
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
sunxi: dts: Add a CONFIG_DEFAULT_DEVICE_TREE setting to all sunxi boards This is a preparation patch for switching all sunxi boards over to using the driver model. Note that rather then defining both CONFIG_DEFAULT_DEVICE_TREE (for u-boot) and CONFIG_FDTFILE (for the kernel), this commit simply replaces all CONFIG_FDTFILE defconfig settings with CONFIG_DEFAULT_DEVICE_TREE and uses CONFIG_DEFAULT_DEVICE_TREE for setting the default fdtfile env value in sunxi-common.h . Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-18 21:32:23 +00:00
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600"
sunxi: Add Ippo_q8h_v1_2_a33_1024x600 defconfig Add a defconfig for generic 7" tablets using the Ippo q8h v1.2 pcb, with an A33 SoC (the pcb can take an A23 or an A33), and a 1024x600 LCD. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-07 07:06:39 +00:00
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
sunxi: axp: Move axp gpio code to a separate axpi-gpio driver Move the axp-gpio code out of the drivers/power/axp*.c code, and into a new separate axpi-gpio driver. This change drops supports for the gpio3 pin on the axp209, as that requires special handling, and no boards are using it. Besides cleaning things up by moving the code to a separate driver, as a bonus this change also adds support for the (non vusb) gpio pins on the axp221 and the gpio pins on the axp152. The new axp-gpio driver gets its own Kconfig option, and is only enabled on boards which need it. Besides that it only gets enabled in the regular u-boot build and not for the SPL as we never need it in the SPL. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-25 15:25:14 +00:00
CONFIG_AXP_GPIO=y
sunxi: Add Ippo_q8h_v1_2_a33_1024x600 defconfig Add a defconfig for generic 7" tablets using the Ippo q8h v1.2 pcb, with an A33 SoC (the pcb can take an A23 or an A33), and a 1024x600 LCD. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-07 07:06:39 +00:00
CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:159,ri:160,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_CLK=480
# zq = 0x3bbb
CONFIG_DRAM_ZQ=15291
# Wifi power
CONFIG_AXP221_DLDO1_VOLT=3300
# aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP
CONFIG_AXP221_ALDO1_VOLT=3000
Reference in New Issue Copy Permalink