leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8311e84b18
u-boot/configs/socfpga_de10_nano_defconfig

69 lines
1.7 KiB
Plaintext
Raw Normal View History

arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_ARM=y
CONFIG_ARCH_SOCFPGA=y
configs: Migrate CONFIG_SYS_TEXT_BASE On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-03 17:10:38 +00:00
CONFIG_SYS_TEXT_BASE=0x01000040
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_SOCFPGA_TERASIC_DE10_NANO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-08 00:27:54 +00:00
CONFIG_SPL=y
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_SPL_STACK_R_ADDR=0x00800000
configs: Re-sync with CONFIG_DISTRO_DEFAULTS A number of platforms include config_distro_defaults.h but do not enable CONFIG_DISTRO_DEFAULTS. As they plainly intended to, set that flag and re-sync config files. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-10 21:54:38 +00:00
CONFIG_DISTRO_DEFAULTS=y
configs: Migrate CONFIG_NR_DRAM_BANKS We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 12:16:24 +00:00
CONFIG_NR_DRAM_BANKS=1
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_FIT=y
configs: Re-sync with CONFIG_DISTRO_DEFAULTS A number of platforms include config_distro_defaults.h but do not enable CONFIG_DISTRO_DEFAULTS. As they plainly intended to, set that flag and re-sync config files. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-10 21:54:38 +00:00
# CONFIG_USE_BOOTCOMMAND is not set
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-01 15:41:11 +00:00
CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de10_nano.dtb"
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to Kconfig Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28 12:38:17 +00:00
CONFIG_DISPLAY_BOARDINFO_LATE=y
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
spl: spi: Move CONFIG_SPL_SPI_LOAD to Kconfig Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all configurations using it to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-04-07 14:05:27 +00:00
CONFIG_SPL_SPI_LOAD=y
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_DFU=y
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
# CONFIG_CMD_FLASH is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_CMD_MMC=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT We move all instances of CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files. There's a few cases here where we need to expand upon what was in the header file. Tested-by: Adam Ford <aford173@gmail.com> #omap3_logic Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-22 21:55:07 +00:00
CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-28 14:45:55 +00:00
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-03 19:26:12 +00:00
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de10_nano"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-28 11:16:32 +00:00
CONFIG_ENV_IS_IN_MMC=y
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_SPL_DM=y
CONFIG_DFU_MMC=y
kconfig: Convert FPGA_SOCFPGA configuration to Kconfig This converts the following to Kconfig: CONFIG_FPGA_SOCFPGA Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-07-26 05:05:40 +00:00
CONFIG_FPGA_SOCFPGA=y
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_DM_GPIO=y
CONFIG_DWAPB_GPIO=y
configs: socfpga: convert i2c to dm Enable DM I2C driver on SoCFPGA platforms. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-04 22:18:21 +00:00
CONFIG_DM_I2C=y
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_SYS_I2C_DW=y
CONFIG_DM_MMC=y
CONFIG_MMC_DW=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:44:53 +00:00
CONFIG_MTD_DEVICE=y
Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-02 00:20:00 +00:00
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 04:03:57 +00:00
CONFIG_MII=y
configs: socfpga: add DM_RESET Add the DM reset driver to socfpga defconfigs. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-04 22:18:25 +00:00
CONFIG_DM_RESET=y
Convert CONFIG_SPI to Kconfig This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15 17:51:26 +00:00
CONFIG_SPI=y
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_CADENCE_QSPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
usb: Kconfig: migrate USB_DWC2 to Kconfig This change migrates the USB_DWC2 configuration item to Kconfig and runs moveconfig to adjust header files and defconfig. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Split off into a separate patch: Ran moveconfig to migrate other boards: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-03 16:30:06 +00:00
CONFIG_USB_DWC2=y
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
usb: gadget: Make g_dnl USB settings common The g_dnl USB settings for the vendor ID, product ID and manufacturer are actually common settings that can and should be shared by all the gadgets. Make them common by renaming them, and convert all the users. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-07 06:58:08 +00:00
CONFIG_USB_GADGET_MANUFACTURER="terasic"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
arm: socfpga: add cyclone5 based de10-nano board Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-18 15:11:16 +00:00
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USE_TINY_PRINTF=y
Reference in New Issue Copy Permalink