leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8311e84b18
u-boot/configs/porter_defconfig

90 lines
2.0 KiB
Plaintext
Raw Normal View History

arm: rmobile: Add Porter board support Porter is an entry level development board based on R-Car M2 SoC (R8A7791) This commit supports the following peripherals: - SCIF, I2C, Ethernet, QSPI, SD, USB Host Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-02-13 22:06:13 +00:00
CONFIG_ARM=y
ARM: rmobile: Add JTAG recovery support for M2 Porter Add JTAG recovery support into the M2 Porter TPL. This allows the TPL to be loaded over JTAG, initialize the system, wait for the JTAG debugger to load U-Boot image into RAM and then resume and start U-Boot from RAM. The procedure is as follows: 1) Load u-boot-tpl.bin to 0xe6300000 2) Write magic number 0x1337c0de to 0xe6300020 TPL checks for this particular magic and starts JTAG recovery if this number is present. This is not present by default. 3) Start U-Boot TPL from 0xe6300000 4) Wait for a message from TPL on UART indicating JTAG boot: "JTAG boot detected!" 5) Halt the system in JTAG debugger 6) Load U-Boot image (u-boot.img) to 0x4fffffc0 7) Write magic number 0xb33fc0de to 0xe6300024 TPL checks for this particular magic to verify that the U-Boot image was loaded into DRAM by the JTAG debugger. 8) Resume the system in JTAG debugger Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-07 14:16:30 +00:00
CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
ARM: rmobile: Convert TPL to SPL There is currently no use for building the SPL anymore, since the SPI loader can easily be replaced by TPL and TPL does load U-Boot directly. Upgrade TPL to SPL and replace what used to be SPL with it. This way we build the U-Boot sources only twice, not thrice. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-13 21:13:00 +00:00
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
ARM: Rmobile: Rename CONFIG_RMOBILE to CONFIG_ARCH_RMOBILE Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-10-09 20:58:28 +00:00
CONFIG_ARCH_RMOBILE=y
ARM: rmobile: Convert Porter to SPL Due to size limitations of the MERAM, switch U-Boot to SPL. The SPL is loaded by the SPI_LOADER into MERAM and then loads U-Boot proper into DRAM. This way U-Boot can freely grow in size in DRAM, as there is plenty of it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- NOTE: To update U-Boot, first install u-boot.img to 0x140000 in SPI NOR, then use the Minimon to flash u-boot-spl.srec using ls,2,e6304000. To generate u-boot-spl.srec, use objcopy: arm-linux-gnueabi-objcopy -O srec spl/u-boot-spl u-boot-spl.srec
2018-02-16 00:33:27 +00:00
CONFIG_SYS_TEXT_BASE=0x50000000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
ARM: rmobile: Convert R8A7791 Porter board to DM and DT Convert the R8A7791 Porter board to DM and DT. This implies mostly enabling the necessary configuration options and plucking out the ad-hoc configuration from the board file. Moreover, the pre-reloc malloc size was increased to allow the clock driver to start up early without running out of malloc space and the early stack was moved further up in the DRAM to avoid rewriting U-Boot itself. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-07 18:32:56 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x8000
ARM: rmobile: Convert CONFIG_ARCH_RMOBILE_BOARD_STRING to Kconfig Convert the symbol to Kconfig, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-02 09:42:22 +00:00
CONFIG_ARCH_RMOBILE_BOARD_STRING="Porter"
ARM: rmobile: Convert CONFIG_R8A77xx to Kconfig Convert these configuration options to Kconfig, update board defconfigs and drop them from whitelist. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-07 18:37:06 +00:00
CONFIG_R8A7791=y
arm: rmobile: Add Porter board support Porter is an entry level development board based on R-Car M2 SoC (R8A7791) This commit supports the following peripherals: - SCIF, I2C, Ethernet, QSPI, SD, USB Host Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-02-13 22:06:13 +00:00
CONFIG_TARGET_PORTER=y
ARM: rmobile: Convert Porter to SPL Due to size limitations of the MERAM, switch U-Boot to SPL. The SPL is loaded by the SPI_LOADER into MERAM and then loads U-Boot proper into DRAM. This way U-Boot can freely grow in size in DRAM, as there is plenty of it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- NOTE: To update U-Boot, first install u-boot.img to 0x140000 in SPI NOR, then use the Minimon to flash u-boot-spl.srec using ls,2,e6304000. To generate u-boot-spl.srec, use objcopy: arm-linux-gnueabi-objcopy -O srec spl/u-boot-spl u-boot-spl.srec
2018-02-16 00:33:27 +00:00
CONFIG_SPL_SERIAL_SUPPORT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 15:57:37 +00:00
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL=y
ARM: rmobile: Convert Porter to SPL Due to size limitations of the MERAM, switch U-Boot to SPL. The SPL is loaded by the SPI_LOADER into MERAM and then loads U-Boot proper into DRAM. This way U-Boot can freely grow in size in DRAM, as there is plenty of it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- NOTE: To update U-Boot, first install u-boot.img to 0x140000 in SPI NOR, then use the Minimon to flash u-boot-spl.srec using ls,2,e6304000. To generate u-boot-spl.srec, use objcopy: arm-linux-gnueabi-objcopy -O srec spl/u-boot-spl u-boot-spl.srec
2018-02-16 00:33:27 +00:00
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
configs: Migrate CONFIG_NR_DRAM_BANKS We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 12:16:24 +00:00
CONFIG_NR_DRAM_BANKS=1
ARM: rmobile: Enable convenient commands on Porter Enable cache and time commands, which are convenience tools for doing benchmarks and various boot tests. Also enable FIT support for booting fitImage. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-02-17 00:19:20 +00:00
CONFIG_FIT=y
configs: Resync with savedefconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-08 20:11:59 +00:00
CONFIG_BOOTDELAY=3
common, kconfig: move VERSION_VARIABLE to Kconfig move VERSION_VARIABLE from board config file into a Kconfig option. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-09-09 06:12:49 +00:00
CONFIG_VERSION_VARIABLE=y
ARM: rmobile: Convert Porter to SPL Due to size limitations of the MERAM, switch U-Boot to SPL. The SPL is loaded by the SPI_LOADER into MERAM and then loads U-Boot proper into DRAM. This way U-Boot can freely grow in size in DRAM, as there is plenty of it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- NOTE: To update U-Boot, first install u-boot.img to 0x140000 in SPI NOR, then use the Minimon to flash u-boot-spl.srec using ls,2,e6304000. To generate u-boot-spl.srec, use objcopy: arm-linux-gnueabi-objcopy -O srec spl/u-boot-spl u-boot-spl.srec
2018-02-16 00:33:27 +00:00
CONFIG_SPL_BOARD_INIT=y
ARM: rmobile: Add TPL support on R8A7791 M2 Porter Add and enable TPL on M2 Porter. The TPL must fit into 16 kiB due to the Gen2 BootROM restriction. The TPL is running from MERAM and is capable of performing the initial initialization of PFC, Clock, GPIO, LBSC, DBSC and QSPI NOR. DBSC is responsible for bringing up the DDR DRAM access. The TPL is capable of loading the next stage, U-Boot, from either SPI NOR or UART as a fallback. If either does provide a valid U-Boot uImage, the system stops, which allows the operator to load U-Boot ie. via JTAG and start it manually. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-03 10:52:48 +00:00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
ARM: rmobile: Convert TPL to SPL There is currently no use for building the SPL anymore, since the SPI loader can easily be replaced by TPL and TPL does load U-Boot directly. Upgrade TPL to SPL and replace what used to be SPL with it. This way we build the U-Boot sources only twice, not thrice. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-13 21:13:00 +00:00
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
spl: spi: Move CONFIG_SPL_SPI_LOAD to Kconfig Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all configurations using it to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-04-07 14:05:27 +00:00
CONFIG_SPL_SPI_LOAD=y
ARM: rmobile: Convert Porter to SPL Due to size limitations of the MERAM, switch U-Boot to SPL. The SPL is loaded by the SPI_LOADER into MERAM and then loads U-Boot proper into DRAM. This way U-Boot can freely grow in size in DRAM, as there is plenty of it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- NOTE: To update U-Boot, first install u-boot.img to 0x140000 in SPI NOR, then use the Minimon to flash u-boot-spl.srec using ls,2,e6304000. To generate u-boot-spl.srec, use objcopy: arm-linux-gnueabi-objcopy -O srec spl/u-boot-spl u-boot-spl.srec
2018-02-16 00:33:27 +00:00
CONFIG_SPL_YMODEM_SUPPORT=y
ARM: rmobile: Enable HUSH on M2 Porter Enable the HUSH shell, since it is far more capable. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-07 15:15:00 +00:00
CONFIG_HUSH_PARSER=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_BOOTZ=y
Move defaults from config_cmd_default.h to Kconfig This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-22 21:15:30 +00:00
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
ARM: rmobile: Convert R8A7791 Porter board to DM and DT Convert the R8A7791 Porter board to DM and DT. This implies mostly enabling the necessary configuration options and plucking out the ad-hoc configuration from the board file. Moreover, the pre-reloc malloc size was increased to allow the clock driver to start up early without running out of malloc space and the early stack was moved further up in the DRAM to avoid rewriting U-Boot itself. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-07 18:32:56 +00:00
CONFIG_CMD_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_I2C=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_MMC=y
ARM: rmobile: Convert R8A7791 Porter board to DM and DT Convert the R8A7791 Porter board to DM and DT. This implies mostly enabling the necessary configuration options and plucking out the ad-hoc configuration from the board file. Moreover, the pre-reloc malloc size was increased to allow the clock driver to start up early without running out of malloc space and the early stack was moved further up in the DRAM to avoid rewriting U-Boot itself. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-07 18:32:56 +00:00
CONFIG_CMD_PCI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_SDRAM=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_MII=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_CMD_PING=y
ARM: rmobile: Enable convenient commands on Porter Enable cache and time commands, which are convenience tools for doing benchmarks and various boot tests. Also enable FIT support for booting fitImage. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-02-17 00:19:20 +00:00
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
ARM: rmobile: Represent SF partitioning with mtdparts on Porter Add mtdparts description for the board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-31 12:41:53 +00:00
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=spi0.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:256k(u-boot-spl),512k(u-boot-env1),512k(u-boot-env2),768k(u-boot),-(user)"
ARM: rmobile: Enable OF_CONTROL on RCar Gen2 Since the DTs are now in place, enable OF control so that they get bundled into the U-Boot. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-07 19:26:04 +00:00
CONFIG_OF_CONTROL=y
ARM: rmobile: Convert Porter to SPL Due to size limitations of the MERAM, switch U-Boot to SPL. The SPL is loaded by the SPI_LOADER into MERAM and then loads U-Boot proper into DRAM. This way U-Boot can freely grow in size in DRAM, as there is plenty of it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- NOTE: To update U-Boot, first install u-boot.img to 0x140000 in SPI NOR, then use the Minimon to flash u-boot-spl.srec using ls,2,e6304000. To generate u-boot-spl.srec, use objcopy: arm-linux-gnueabi-objcopy -O srec spl/u-boot-spl u-boot-spl.srec
2018-02-16 00:33:27 +00:00
CONFIG_OF_EMBED=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-03 19:26:12 +00:00
CONFIG_DEFAULT_DEVICE_TREE="r8a7791-porter-u-boot"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-28 11:16:32 +00:00
CONFIG_ENV_IS_IN_SPI_FLASH=y
ARM: rmobile: Convert R8A7791 Porter board to DM and DT Convert the R8A7791 Porter board to DM and DT. This implies mostly enabling the necessary configuration options and plucking out the ad-hoc configuration from the board file. Moreover, the pre-reloc malloc size was increased to allow the clock driver to start up early without running out of malloc space and the early stack was moved further up in the DRAM to avoid rewriting U-Boot itself. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-07 18:32:56 +00:00
CONFIG_CLK=y
CONFIG_CLK_RENESAS=y
CONFIG_DM_GPIO=y
CONFIG_RCAR_GPIO=y
ARM: rmobile: Replace SH I2C with IIC on Porter Get rid of the SH I2C driver on Porter and enable the IIC driver instead . The old SH I2C is completely broken on Porter anyway and the DM/DT capable IIC driver allows access to the PMIC too. Use the DM/DT capable driver instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-02-17 01:15:08 +00:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_RCAR_IIC=y
ARM: rmobile: Convert R8A7791 Porter board to DM and DT Convert the R8A7791 Porter board to DM and DT. This implies mostly enabling the necessary configuration options and plucking out the ad-hoc configuration from the board file. Moreover, the pre-reloc malloc size was increased to allow the clock driver to start up early without running out of malloc space and the early stack was moved further up in the DRAM to avoid rewriting U-Boot itself. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-07 18:32:56 +00:00
CONFIG_DM_MMC=y
ARM: rmobile: Switch to CONFIG_RENESAS_SDHI Since the Renesas SDHI has it's own custom driver sharing the common code with Uniphier one, adjust the Kconfig entries. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-08 17:17:55 +00:00
CONFIG_RENESAS_SDHI=y
ARM: rmobile: Represent SF partitioning with mtdparts on Porter Add mtdparts description for the board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-31 12:41:53 +00:00
CONFIG_MTD=y
Convert CONFIG_MTD_PARTITIONS et al to Kconfig This converts the following to Kconfig: CONFIG_MTD_PARTITIONS CONFIG_MTD_DEVICE Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-08 03:18:22 +00:00
CONFIG_MTD_DEVICE=y
Move default y configs out of arch/board Kconfig Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-22 21:15:29 +00:00
CONFIG_SPI_FLASH=y
defconfig: Move CONFIG_SPI_FLASH_BAR from configs This commit moves: - CONFIG_SPI_FLASH_BAR from include/configs/*.h into configs/*_defconfigs Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-06-29 17:06:18 +00:00
CONFIG_SPI_FLASH_BAR=y
sf: Move SPI flash drivers to defconfig There are already Kconfig options for SPI flash drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-25 13:34:54 +00:00
CONFIG_SPI_FLASH_SPANSION=y
ARM: rmobile: Represent SF partitioning with mtdparts on Porter Add mtdparts description for the board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-31 12:41:53 +00:00
CONFIG_SPI_FLASH_MTD=y
Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-02 00:20:00 +00:00
CONFIG_PHY_MICREL=y
ARM: rmobile: Convert R8A7791 Porter board to DM and DT Convert the R8A7791 Porter board to DM and DT. This implies mostly enabling the necessary configuration options and plucking out the ad-hoc configuration from the board file. Moreover, the pre-reloc malloc size was increased to allow the clock driver to start up early without running out of malloc space and the early stack was moved further up in the DRAM to avoid rewriting U-Boot itself. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-07 18:32:56 +00:00
CONFIG_DM_ETH=y
net: sh-eth: Add to Kconfig and convert This adds SH_ETHER to drivers/net/Kconfig and convert to Kconfig. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-12-01 07:08:03 +00:00
CONFIG_SH_ETHER=y
ARM: rmobile: Convert R8A7791 Porter board to DM and DT Convert the R8A7791 Porter board to DM and DT. This implies mostly enabling the necessary configuration options and plucking out the ad-hoc configuration from the board file. Moreover, the pre-reloc malloc size was increased to allow the clock driver to start up early without running out of malloc space and the early stack was moved further up in the DRAM to avoid rewriting U-Boot itself. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-07 18:32:56 +00:00
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_PFC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
serial: sh: Convert to Kconfig Convert the SH Serial to Kconfig using tools/moveconfig.py tool and a bit of manual adjustment to cater for failed conversions. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-07-21 21:18:46 +00:00
CONFIG_SCIF_CONSOLE=y
Convert CONFIG_SPI to Kconfig This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15 17:51:26 +00:00
CONFIG_SPI=y
spi: Migrate CONFIG_SH_QSPI to Kconfig Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-02-07 00:42:17 +00:00
CONFIG_SH_QSPI=y
configs: Migrate CONFIG_USB_STORAGE In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-08 20:31:26 +00:00
CONFIG_USB=y
ARM: rmobile: Convert R8A7791 Porter board to DM and DT Convert the R8A7791 Porter board to DM and DT. This implies mostly enabling the necessary configuration options and plucking out the ad-hoc configuration from the board file. Moreover, the pre-reloc malloc size was increased to allow the clock driver to start up early without running out of malloc space and the early stack was moved further up in the DRAM to avoid rewriting U-Boot itself. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-07 18:32:56 +00:00
CONFIG_DM_USB=y
Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig. For a few SoCs, imply or default y this if USB is enabled. In some cases we had not already migrated to CONFIG_USB so do that as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-13 02:33:28 +00:00
CONFIG_USB_EHCI_HCD=y
ARM: rmobile: Convert R8A7791 Porter board to DM and DT Convert the R8A7791 Porter board to DM and DT. This implies mostly enabling the necessary configuration options and plucking out the ad-hoc configuration from the board file. Moreover, the pre-reloc malloc size was increased to allow the clock driver to start up early without running out of malloc space and the early stack was moved further up in the DRAM to avoid rewriting U-Boot itself. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-07 18:32:56 +00:00
CONFIG_USB_EHCI_PCI=y
configs: Migrate CONFIG_USB_STORAGE In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-08 20:31:26 +00:00
CONFIG_USB_STORAGE=y
Reference in New Issue Copy Permalink