leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
76d1d169f3
u-boot/board/intel/Kconfig

87 lines
3.1 KiB
Plaintext
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
# SPDX-License-Identifier: GPL-2.0+
x86: Kconfig: Divide the target selection to vendor/model Let arch/x86/Kconfig prompt board vendor first, then select the board model under that vendor. This way arch/x86/Kconfig only needs concern board vendor and leave the supported target list to board/<vendor>/Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-27 15:22:24 +00:00
#
# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
if VENDOR_INTEL
choice
prompt "Mainboard model"
arch: Make board selection choices optional By making the board selections optional, every defconfig will include the board selection when running savedefconfig so if a new board is added to the top of the list of choices the former top's defconfig will still be correct. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
2015-05-12 19:46:23 +00:00
optional
x86: Kconfig: Divide the target selection to vendor/model Let arch/x86/Kconfig prompt board vendor first, then select the board model under that vendor. This way arch/x86/Kconfig only needs concern board vendor and leave the supported target list to board/<vendor>/Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-27 15:22:24 +00:00
x86: Add Intel Bayley Bay board support Intel Bayley Bay board is a BayTrail based board. Add this board with existing baytrail fsp support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-30 10:49:17 +00:00
config TARGET_BAYLEYBAY
bool "Bayley Bay"
help
This is the Intel Bayley Bay Customer Reference Board. It contains an
Intel quad-core Atom Processor E3800 with dual-channel DDR3L SODIMM
4GB memory, HDMI/DP/VGA display, HD audio, SATA, USB2, USB3, SD, eMMC,
PCIe and some other sensor interfaces.
x86: Support Intel Cherry Hill board This adds support to Intel Cherry Hill board, a board based on Intel Braswell SoC. The following devices are validated: - serial port as the serial console - on-board Realtek 8169 ethernet controller - SATA AHCI controller - EMMC/SDHC controller - USB 3.0 xHCI controller - PCIe x1 slot with a graphics card - ICH SPI controller with an 8MB Macronix SPI flash - Integrated graphics device as the video console Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-16 05:42:02 +00:00
config TARGET_CHERRYHILL
bool "Cherry Hill"
help
This is the Intel Cherry Hill Customer Reference Board. It is in a
mini-ITX form factor containing the Intel Braswell SoC, which has
a 64-bit quad-core, single-thread, Intel Atom processor, along with
serial console, 10/100/1000 Ethernet, SD-Card, USB 2/3, SATA, PCIe,
some GPIOs, one HDMI and two DP video out.
x86: Add Intel Cougar Canyon 2 board This adds basic support to Intel Cougar Canyon 2 board, a board based on Chief River platform with an Ivy Bridge processor and a Panther Point chipset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-02-17 08:16:25 +00:00
config TARGET_COUGARCANYON2
bool "Cougar Canyon 2"
help
This is the Intel Cougar Canyon 2 Customer Reference Board. It
is built on the Chief River platform with Intel Ivybridge Processor
and Panther Point chipset. The board has 4GB RAM, with some other
peripheral connectors for PCIe/SATA/USB2/USB3/LAN/UART/PS2/VGA/HDMI.
x86: Kconfig: Divide the target selection to vendor/model Let arch/x86/Kconfig prompt board vendor first, then select the board model under that vendor. This way arch/x86/Kconfig only needs concern board vendor and leave the supported target list to board/<vendor>/Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-27 15:22:24 +00:00
config TARGET_CROWNBAY
bool "Crown Bay"
help
This is the Intel Crown Bay Customer Reference Board. It contains
the Intel Atom Processor E6xx populated on the COM Express module
with 1GB DDR2 soldered down memory and a carrier board with the
Intel Platform Controller Hub EG20T, other system components and
peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
x86: Add Intel Edison board files Add Intel Edison board which is using U-Boot. The patch is based on work done by the following people (in alphabetical order): Aiden Park <aiden.park@intel.com> Dukjoon Jeon <dukjoon.jeon@intel.com> eric.park <eric.park@intel.com> Fabien Chereau <fabien.chereau@intel.com> Felipe Balbi <felipe.balbi@linux.intel.com> Scott D Phillips <scott.d.phillips@intel.com> Sebastien Colleur <sebastienx.colleur@intel.com> Steve Sakoman <steve.sakoman@intel.com> Vincent Tinelli <vincent.tinelli@intel.com> In case we're building for Intel Edison, we must have 4096 bytes of zeroes in the beginning on u-boot.bin. This is done in board/intel/edison/config.mk. First run sets hardware_id environment variable which is read from System Controller Unit (SCU). Serial number (serial# environment variable) is generated based on eMMC CID. MAC address on USB network interface is unique to the board but kept the same all over the time. Set mac address from U-Boot using following scheme: OUI = 02:00:86 next 3 bytes of MAC address set from eMMC serial number This allows to have a unique mac address across reboot and flashing. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [bmeng: Add MAINTAINERS file for Intel Edison board] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-06 11:41:53 +00:00
config TARGET_EDISON
bool "Edison"
help
This is the Intel Edison Compute Module. It contains a dual core Intel
Atom Tangier CPU, 1 GB RAM integrated on package. There is also 4 GB
eMMC flash on board, Wi-Fi, Bluetooth 4 and USB controllers.
x86: Kconfig: Divide the target selection to vendor/model Let arch/x86/Kconfig prompt board vendor first, then select the board model under that vendor. This way arch/x86/Kconfig only needs concern board vendor and leave the supported target list to board/<vendor>/Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-27 15:22:24 +00:00
config TARGET_GALILEO
bool "Galileo"
help
This is the Intel Galileo board, which is the first in a family of
Arduino-certified development and prototyping boards based on Intel
architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit
single-core, single-thread, Intel Pentium processor instrunction set
architecture (ISA) compatible, operating at speeds up to 400Mhz,
along with 256MB DDR3 memory. It supports a wide range of industry
standard I/O interfaces, including a full-sized mini-PCIe slot,
one 100Mb Ethernet port, a microSD card slot, a USB host port and
a USB client port.
config TARGET_MINNOWMAX
bool "Minnowboard MAX"
help
This is the Intel Minnowboard MAX. It contains an Atom E3800
processor in a small form factor with Ethernet, micro-SD, USB 2,
USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out.
It requires some binary blobs - see README.x86 for details.
Note that PCIE_ECAM_BASE is set up by the FSP so the value used
by U-Boot matches that value.
endchoice
x86: Add Intel Bayley Bay board support Intel Bayley Bay board is a BayTrail based board. Add this board with existing baytrail fsp support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-30 10:49:17 +00:00
source "board/intel/bayleybay/Kconfig"
x86: Support Intel Cherry Hill board This adds support to Intel Cherry Hill board, a board based on Intel Braswell SoC. The following devices are validated: - serial port as the serial console - on-board Realtek 8169 ethernet controller - SATA AHCI controller - EMMC/SDHC controller - USB 3.0 xHCI controller - PCIe x1 slot with a graphics card - ICH SPI controller with an 8MB Macronix SPI flash - Integrated graphics device as the video console Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-16 05:42:02 +00:00
source "board/intel/cherryhill/Kconfig"
x86: Add Intel Cougar Canyon 2 board This adds basic support to Intel Cougar Canyon 2 board, a board based on Chief River platform with an Ivy Bridge processor and a Panther Point chipset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-02-17 08:16:25 +00:00
source "board/intel/cougarcanyon2/Kconfig"
x86: Kconfig: Divide the target selection to vendor/model Let arch/x86/Kconfig prompt board vendor first, then select the board model under that vendor. This way arch/x86/Kconfig only needs concern board vendor and leave the supported target list to board/<vendor>/Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-27 15:22:24 +00:00
source "board/intel/crownbay/Kconfig"
x86: Add Intel Edison board files Add Intel Edison board which is using U-Boot. The patch is based on work done by the following people (in alphabetical order): Aiden Park <aiden.park@intel.com> Dukjoon Jeon <dukjoon.jeon@intel.com> eric.park <eric.park@intel.com> Fabien Chereau <fabien.chereau@intel.com> Felipe Balbi <felipe.balbi@linux.intel.com> Scott D Phillips <scott.d.phillips@intel.com> Sebastien Colleur <sebastienx.colleur@intel.com> Steve Sakoman <steve.sakoman@intel.com> Vincent Tinelli <vincent.tinelli@intel.com> In case we're building for Intel Edison, we must have 4096 bytes of zeroes in the beginning on u-boot.bin. This is done in board/intel/edison/config.mk. First run sets hardware_id environment variable which is read from System Controller Unit (SCU). Serial number (serial# environment variable) is generated based on eMMC CID. MAC address on USB network interface is unique to the board but kept the same all over the time. Set mac address from U-Boot using following scheme: OUI = 02:00:86 next 3 bytes of MAC address set from eMMC serial number This allows to have a unique mac address across reboot and flashing. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [bmeng: Add MAINTAINERS file for Intel Edison board] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-06 11:41:53 +00:00
source "board/intel/edison/Kconfig"
x86: Kconfig: Divide the target selection to vendor/model Let arch/x86/Kconfig prompt board vendor first, then select the board model under that vendor. This way arch/x86/Kconfig only needs concern board vendor and leave the supported target list to board/<vendor>/Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-27 15:22:24 +00:00
source "board/intel/galileo/Kconfig"
source "board/intel/minnowmax/Kconfig"
endif
Reference in New Issue Copy Permalink