u-boot/board/gdsys/mpc8308/mpc8308.h

#ifndef __MPC8308_H_
#define __MPC8308_H_

void setbits_gpio0_out(u32 mask);
void clrbits_gpio0_out(u32 mask);

/* functions to be provided by board implementation */
void mpc8308_init(void);
void mpc8308_set_fpga_reset(unsigned state);
void mpc8308_setup_hw(void);
int mpc8308_get_fpga_done(unsigned fpga);

#endif /* __MPC8308_H_ */
mpc83xx: Add gdsys hrcon board The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de> 2014-11-13 18:21:18 +00:00			`#ifndef __MPC8308_H_`
			`#define __MPC8308_H_`

gdsys: mpc8308: Use shadow register for output GPIO values Since the gpio output status on MPC8xxx cannot be read back, it has to be buffered locally. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Mario Six <mario.six@gdsys.cc> 2019-03-29 09:18:07 +00:00			`void setbits_gpio0_out(u32 mask);`
			`void clrbits_gpio0_out(u32 mask);`

mpc83xx: Add gdsys hrcon board The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de> 2014-11-13 18:21:18 +00:00			`/* functions to be provided by board implementation */`
			`void mpc8308_init(void);`
			`void mpc8308_set_fpga_reset(unsigned state);`
			`void mpc8308_setup_hw(void);`
			`int mpc8308_get_fpga_done(unsigned fpga);`

			`#endif /* __MPC8308_H_ */`