leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
u-boot/configs/mvebu_espressobin-88f3720_defconfig

108 lines
2.4 KiB
Plaintext
Raw Permalink Normal View History

arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_ARM=y
Convert CONFIG_ARCH_CPU_INIT to Kconfig This converts the following to Kconfig: CONFIG_ARCH_CPU_INIT Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Felix Brack <fb@ltec.ch>
2019-08-14 13:29:25 +00:00
CONFIG_ARCH_CPU_INIT=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_ARCH_MVEBU=y
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21 00:22:39 +00:00
CONFIG_TEXT_BASE=0x00000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 19:31:07 +00:00
CONFIG_NR_DRAM_BANKS=1
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_TARGET_MVEBU_ARMADA_37XX=y
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x10000
arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's U-Boot Espressobin board comes with Marvell's U-Boot version where U-Boot env is stored in SPI at offset 0x3F0000. This patch changes env offset in Espressobin defconfig file to match Marvell's U-Boot version. Users who want to use previous or different env offset can still change it in .config file when compiling U-Boot. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Andre Heider <a.heider@gmail.com>
2020-08-19 14:24:16 +00:00
CONFIG_ENV_OFFSET=0x3F0000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28 20:15:47 +00:00
CONFIG_ENV_SECT_SIZE=0x10000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_DM_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="armada-3720-espressobin"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 15:57:37 +00:00
CONFIG_DEBUG_UART_BASE=0xd0012000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 17:36:51 +00:00
CONFIG_SYS_LOAD_ADDR=0x6000000
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-19 13:47:40 +00:00
CONFIG_DEBUG_UART=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_AHCI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-11 01:27:45 +00:00
CONFIG_DISTRO_DEFAULTS=y
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-25 16:16:03 +00:00
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-07 18:05:55 +00:00
CONFIG_OF_BOARD_SETUP=y
Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-21 02:51:14 +00:00
CONFIG_USE_PREBOOT=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to Kconfig Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28 12:38:17 +00:00
CONFIG_DISPLAY_BOARDINFO_LATE=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_ARCH_EARLY_INIT_R=y
CONFIG_BOARD_EARLY_INIT_F=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_BOARD_LATE_INIT=y
arm: mvebu: Espressobin: Use DM registered MDIO to configure switch In order to be able to get rid of the non-DM MDIO bus registered in mvneta driver, we need to stop using board_network_enable() and instead use the DM registered MDIO device to configure switch in last_stage_init(). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-27 10:41:48 +00:00
CONFIG_LAST_STAGE_INIT=y
Convert CONFIG_SYS_MAXARGS to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 20:21:06 +00:00
CONFIG_SYS_MAXARGS=32
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
# CONFIG_CMD_FLASH is not set
arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards Allow to read OTP bits via U-Boot fuse command on all Armada 3720 boards. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-23 13:15:46 +00:00
CONFIG_CMD_FUSE=y
arm64: a37xx: defconfig: Enable PINCTRL and GPIO support for ESPRESSOBin board This patch enable the PINCTRL and GPIO support, including the GPIO command on the Armada 3720 espressobin board. Reviewed-on: http://vgitil04.il.marvell.com:8080/40746 Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Wilson Ding <dingwei@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-03-26 07:55:56 +00:00
CONFIG_CMD_GPIO=y
arm: mvebu: espressobin: Enable GPT partition support Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-02 08:46:37 +00:00
CONFIG_CMD_GPT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_I2C=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_CMD_MMC=y
arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitions U-Boot now supports parsing SPI NOR partitions from Device Tree. So enable 'mtd' command support for Espressobin board and define partition layout in U-Boot Espressobin DTS file. Access to SPI NOR via 'sf' command is old method and 'mtd' command is now preferred variant. From include file remove '#define CONFIG_MTD_PARTITIONS' as this option is now defined and enabled in defconfig file. This change is required to fix compile error: CC arch/arm/lib/asm-offsets.s In file included from include/config.h:4, from include/common.h:16, from lib/asm-offsets.c:14: include/configs/mvebu_armada-37xx.h:63: warning: "CONFIG_MTD_PARTITIONS" redefined #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ In file included from ././include/linux/kconfig.h:4, from <command-line>: include/generated/autoconf.h:44: note: this is the location of the previous definition #define CONFIG_MTD_PARTITIONS 1 After enabling support for mtd command, output from 'mtd list' on Espressobin board is: => mtd list List of MTD devices: * w25q32dw - device: spi-flash@0 - parent: spi@10600 - driver: jedec_spi_nor - path: /soc/internal-regs/spi@10600/spi-flash@0 - type: NOR flash - block size: 0x1000 bytes - min I/O: 0x1 bytes - 0x000000000000-0x000000400000 : "w25q32dw" - 0x000000000000-0x0000003f0000 : "firmware" - 0x0000003f0000-0x000000400000 : "u-boot-env" => Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-16 10:34:42 +00:00
CONFIG_CMD_MTD=y
arm64: a37xx: defconfigs: enable PCI_CMD and E1000 driver Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-03-26 07:57:32 +00:00
CONFIG_CMD_PCI=y
arm: mvebu: espressobin: Enable also SATA support via PCIe Espressobin has one on-board SATA port which is connected directly to CPU. More SATA disks can be connected via mPCIe add-in card with PCIe-SATA controller. So enable required SATA AHCI PCIe drivers in defconfig file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-13 11:56:36 +00:00
CONFIG_CMD_SATA=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
arm: mvebu: Espressobin: Enable watchdog support but do not start it Espressobin had disabled watchdog support (CONFIG_WDT) because older stable Linux kernel versions (which are used by current stable OpenWRT and Debian versions) do not have support for Armada 3700 watchdog driver. Therefore they are not able to periodically kick watchdog so Espressobin enter into boot loop. This change enable CONFIG_WDT, CONFIG_WDT_ARMADA_37XX and CONFIG_CMD_WDT options which add support for U-Boot 'wdt' command. And unset new CONFIG_WATCHDOG_AUTOSTART option which cause that watchdog is not automatically started by U-Boot during init phase, like when CONFIG_WDT option is not set at all. So with this change, U-Boot on Espressobin would have working 'wdt' command which can be used from boot scripts (e.g. for enabling watchdog prior new Linux booting kernel). But default behavior of watchdog status stays unchanged, U-Boot does not start watchdog on Espressobin during its init phase. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-09 13:26:57 +00:00
CONFIG_CMD_WDT=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-01 15:41:11 +00:00
CONFIG_CMD_MVEBU_BUBT=y
arm: mvebu: Espressobin: Enable additional options Enable support for NVMe disks which can be connected to mPCIe slot via M.2 reduction. Enable btrfs and squashfs filesystems which are used by more Linux distributions. And enable fsuuid and setexpr commands which can be useful in scripting. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-03 10:34:53 +00:00
CONFIG_CMD_BTRFS=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_CMD_EXT4_WRITE=y
arm: mvebu: Espressobin: Enable additional options Enable support for NVMe disks which can be connected to mPCIe slot via M.2 reduction. Enable btrfs and squashfs filesystems which are used by more Linux distributions. And enable fsuuid and setexpr commands which can be useful in scripting. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-03 10:34:53 +00:00
CONFIG_CMD_SQUASHFS=y
CONFIG_CMD_FS_UUID=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_MAC_PARTITION=y
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 11:48:56 +00:00
CONFIG_ENV_OVERWRITE=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-28 11:16:32 +00:00
CONFIG_ENV_IS_IN_SPI_FLASH=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Convert CONFIG_ARP_TIMEOUT to Kconfig This converts the following to Kconfig: CONFIG_ARP_TIMEOUT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 14:12:01 +00:00
CONFIG_ARP_TIMEOUT=200
Convert CONFIG_NET_RETRY_COUNT to Kconfig This converts the following to Kconfig: CONFIG_NET_RETRY_COUNT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 14:12:02 +00:00
CONFIG_NET_RETRY_COUNT=50
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-05 17:11:41 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
arm: mvebu: espressobin: Enable also SATA support via PCIe Espressobin has one on-board SATA port which is connected directly to CPU. More SATA disks can be connected via mPCIe add-in card with PCIe-SATA controller. So enable required SATA AHCI PCIe drivers in defconfig file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-13 11:56:36 +00:00
CONFIG_AHCI_PCI=y
arm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU This patch enables the new ahci mvebu driver for marvell arm64 platform SOCs(A3k and A8k). And since AHCI_MVEBU selects SCSI_AHCI, so "CONFIG_SCSI_AHCI=y" is removed from those default config files. Signed-off-by: Ken Ma <make@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-25 07:49:27 +00:00
CONFIG_AHCI_MVEBU=y
Convert CONFIG_LBA48 et al to Kconfig This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-11 02:59:28 +00:00
CONFIG_LBA48=y
CONFIG_SYS_64BIT_LBA=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 15:57:37 +00:00
CONFIG_CLK=y
CONFIG_CLK_MVEBU=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_DM_I2C=y
arm: mvebu: a3720: Create Kconfig option for I2C_MV Move the config option CONFIG_I2C_MV to a Kconfig option CONFIG_SYS_I2C_MV and move the default definition from config header files into defconfigs. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-09 17:33:37 +00:00
CONFIG_SYS_I2C_MV=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_MISC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_XENON=y
mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:05 +00:00
CONFIG_MTD=y
arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitions U-Boot now supports parsing SPI NOR partitions from Device Tree. So enable 'mtd' command support for Espressobin board and define partition layout in U-Boot Espressobin DTS file. Access to SPI NOR via 'sf' command is old method and 'mtd' command is now preferred variant. From include file remove '#define CONFIG_MTD_PARTITIONS' as this option is now defined and enabled in defconfig file. This change is required to fix compile error: CC arch/arm/lib/asm-offsets.s In file included from include/config.h:4, from include/common.h:16, from lib/asm-offsets.c:14: include/configs/mvebu_armada-37xx.h:63: warning: "CONFIG_MTD_PARTITIONS" redefined #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ In file included from ././include/linux/kconfig.h:4, from <command-line>: include/generated/autoconf.h:44: note: this is the location of the previous definition #define CONFIG_MTD_PARTITIONS 1 After enabling support for mtd command, output from 'mtd list' on Espressobin board is: => mtd list List of MTD devices: * w25q32dw - device: spi-flash@0 - parent: spi@10600 - driver: jedec_spi_nor - path: /soc/internal-regs/spi@10600/spi-flash@0 - type: NOR flash - block size: 0x1000 bytes - min I/O: 0x1 bytes - 0x000000000000-0x000000400000 : "w25q32dw" - 0x000000000000-0x0000003f0000 : "firmware" - 0x0000003f0000-0x000000400000 : "u-boot-env" => Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-16 10:34:42 +00:00
CONFIG_DM_MTD=y
arm: mvebu: Espressobin: Set the maximum slave SPI speed to 40MHz While the SPI controller speed is defined by DTS, the maximum slave speed (connected devices) is limited by the pre-defined configuration value CONFIG_SF_DEFAULT_SPEED to 1MHz This patch increases this maximum SPI slave device speed to 40MHz Change-Id: I0d1239bd8a2061c66725c2c227c1e1f49c92c29e Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-on: http://vgitil04.il.marvell.com:8080/59516 Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> [pali: Set CONFIG_SF_DEFAULT_SPEED via defconfig] Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-01-27 16:12:00 +00:00
CONFIG_SF_DEFAULT_SPEED=40000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-07 18:05:55 +00:00
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_ISSI=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitions U-Boot now supports parsing SPI NOR partitions from Device Tree. So enable 'mtd' command support for Espressobin board and define partition layout in U-Boot Espressobin DTS file. Access to SPI NOR via 'sf' command is old method and 'mtd' command is now preferred variant. From include file remove '#define CONFIG_MTD_PARTITIONS' as this option is now defined and enabled in defconfig file. This change is required to fix compile error: CC arch/arm/lib/asm-offsets.s In file included from include/config.h:4, from include/common.h:16, from lib/asm-offsets.c:14: include/configs/mvebu_armada-37xx.h:63: warning: "CONFIG_MTD_PARTITIONS" redefined #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ In file included from ././include/linux/kconfig.h:4, from <command-line>: include/generated/autoconf.h:44: note: this is the location of the previous definition #define CONFIG_MTD_PARTITIONS 1 After enabling support for mtd command, output from 'mtd list' on Espressobin board is: => mtd list List of MTD devices: * w25q32dw - device: spi-flash@0 - parent: spi@10600 - driver: jedec_spi_nor - path: /soc/internal-regs/spi@10600/spi-flash@0 - type: NOR flash - block size: 0x1000 bytes - min I/O: 0x1 bytes - 0x000000000000-0x000000400000 : "w25q32dw" - 0x000000000000-0x0000003f0000 : "firmware" - 0x0000003f0000-0x000000400000 : "u-boot-env" => Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-16 10:34:42 +00:00
CONFIG_SPI_FLASH_MTD=y
treewide: Move CONFIG_PHY_MARVELL to Kconfig The CONFIG_PHY_MARVELL has already been migrated to Kconfig (some boards already had it in their Kconfig), but had not been moved for older boards. Move it to the defconfigs for all boards. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-27 12:52:21 +00:00
CONFIG_PHY_MARVELL=y
net: mvneta: Convert to use PHY_FIXED for fixed-link Stop parsing fixed-link in the MAC driver. Instead support only PHY mode and let the fixed PHY driver handle the fixed-link case. Enable CONFIG_PHY_FIXED for mvneta boards that need it: Turris Omnia and ESPRESSObin. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-27 10:41:58 +00:00
CONFIG_PHY_FIXED=y
configs: Finish migration of PHY_GIGE Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-08 02:00:34 +00:00
CONFIG_PHY_GIGE=y
arm64: a37xx: defconfigs: enable PCI_CMD and E1000 driver Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-03-26 07:57:32 +00:00
CONFIG_E1000=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-07 18:05:55 +00:00
CONFIG_MVNETA=y
net: mvneta: Use DM MDIO API for connecting PHY Use the modern DM MDIO API for connecting PHY in the mvneta driver. This requires enabling MVMDIO driver in several config files. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-27 10:41:46 +00:00
CONFIG_MVMDIO=y
nvme: Split out PCI support Apple SoCs have an integrated NVMe controller that isn't connected over a PCIe bus. In preparation for adding support for this NVMe controller, split out the PCI support into its own file. This file is selected through a new CONFIG_NVME_PCI Kconfig option, so do a wholesale replacement of CONFIG_NVME with CONFIG_NVME_PCI. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested on: Macbook Air M1 Tested-by: Simon Glass <sjg@chromium.org>
2022-01-22 19:38:11 +00:00
CONFIG_NVME_PCI=y
arm64: a37xx: defconfigs: enable aardvark pcie driver Signed-off-by: Wilson Ding <dingwei@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-03-26 07:57:30 +00:00
CONFIG_PCI=y
CONFIG_PCI_AARDVARK=y
Makefile: Move phy rules into drivers/phy These don't belong in the drivers Makefile so move them down into the correct place. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Fixup some missing dependencies this exposed] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-11 03:14:23 +00:00
CONFIG_PHY=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_MVEBU_COMPHY_SUPPORT=y
arm64: a37xx: defconfig: Enable PINCTRL and GPIO support for ESPRESSOBin board This patch enable the PINCTRL and GPIO support, including the GPIO command on the Armada 3720 espressobin board. Reviewed-on: http://vgitil04.il.marvell.com:8080/40746 Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Wilson Ding <dingwei@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-03-26 07:55:56 +00:00
CONFIG_PINCTRL=y
CONFIG_PINCTRL_ARMADA_37XX=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-07 18:05:55 +00:00
CONFIG_DM_REGULATOR_GPIO=y
arm64: mvebu: Add default config for ESPRESSOBin board Add initial default configuration for Marvell ESPRESSOBin community board based on Aramda-3720 SoC Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-16 11:52:31 +00:00
CONFIG_MVEBU_A3700_UART=y
CONFIG_MVEBU_A3700_SPI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
usb: net: migrate CONFIG_USB_HOST_ETHER to Kconfig CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and LAN78XX options under new menu. Finally update the defconfigs that need CONFIG_USB_HOST_ETHER. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-28 08:50:45 +00:00
CONFIG_USB_HOST_ETHER=y
usb: net: migrate USB Ethernet adapters to Kconfig This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig. Update defconfigs. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-28 08:50:46 +00:00
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_RTL8152=y
CONFIG_USB_ETHER_SMSC95XX=y
arm: mvebu: Espressobin: Enable watchdog support but do not start it Espressobin had disabled watchdog support (CONFIG_WDT) because older stable Linux kernel versions (which are used by current stable OpenWRT and Debian versions) do not have support for Armada 3700 watchdog driver. Therefore they are not able to periodically kick watchdog so Espressobin enter into boot loop. This change enable CONFIG_WDT, CONFIG_WDT_ARMADA_37XX and CONFIG_CMD_WDT options which add support for U-Boot 'wdt' command. And unset new CONFIG_WATCHDOG_AUTOSTART option which cause that watchdog is not automatically started by U-Boot during init phase, like when CONFIG_WDT option is not set at all. So with this change, U-Boot on Espressobin would have working 'wdt' command which can be used from boot scripts (e.g. for enabling watchdog prior new Linux booting kernel). But default behavior of watchdog status stays unchanged, U-Boot does not start watchdog on Espressobin during its init phase. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-09 13:26:57 +00:00
# CONFIG_WATCHDOG_AUTOSTART is not set
CONFIG_WDT=y
CONFIG_WDT_ARMADA_37XX=y
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-01 15:41:11 +00:00
CONFIG_SHA1=y
Reference in New Issue Copy Permalink