forked from Minki/linux
d80238bbca
Remove the 'flags' variable in order to fix the following warning: drivers/rtc/rtc-armada38x.c:91:22: warning: unused variable 'flags' [-Wunused-variable] Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
321 lines
7.8 KiB
C
321 lines
7.8 KiB
C
/*
|
|
* RTC driver for the Armada 38x Marvell SoCs
|
|
*
|
|
* Copyright (C) 2015 Marvell
|
|
*
|
|
* Gregory Clement <gregory.clement@free-electrons.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/rtc.h>
|
|
|
|
#define RTC_STATUS 0x0
|
|
#define RTC_STATUS_ALARM1 BIT(0)
|
|
#define RTC_STATUS_ALARM2 BIT(1)
|
|
#define RTC_IRQ1_CONF 0x4
|
|
#define RTC_IRQ1_AL_EN BIT(0)
|
|
#define RTC_IRQ1_FREQ_EN BIT(1)
|
|
#define RTC_IRQ1_FREQ_1HZ BIT(2)
|
|
#define RTC_TIME 0xC
|
|
#define RTC_ALARM1 0x10
|
|
|
|
#define SOC_RTC_INTERRUPT 0x8
|
|
#define SOC_RTC_ALARM1 BIT(0)
|
|
#define SOC_RTC_ALARM2 BIT(1)
|
|
#define SOC_RTC_ALARM1_MASK BIT(2)
|
|
#define SOC_RTC_ALARM2_MASK BIT(3)
|
|
|
|
struct armada38x_rtc {
|
|
struct rtc_device *rtc_dev;
|
|
void __iomem *regs;
|
|
void __iomem *regs_soc;
|
|
spinlock_t lock;
|
|
/*
|
|
* While setting the time, the RTC TIME register should not be
|
|
* accessed. Setting the RTC time involves sleeping during
|
|
* 100ms, so a mutex instead of a spinlock is used to protect
|
|
* it
|
|
*/
|
|
struct mutex mutex_time;
|
|
int irq;
|
|
};
|
|
|
|
/*
|
|
* According to the datasheet, the OS should wait 5us after every
|
|
* register write to the RTC hard macro so that the required update
|
|
* can occur without holding off the system bus
|
|
*/
|
|
static void rtc_delayed_write(u32 val, struct armada38x_rtc *rtc, int offset)
|
|
{
|
|
writel(val, rtc->regs + offset);
|
|
udelay(5);
|
|
}
|
|
|
|
static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
unsigned long time, time_check;
|
|
|
|
mutex_lock(&rtc->mutex_time);
|
|
time = readl(rtc->regs + RTC_TIME);
|
|
/*
|
|
* WA for failing time set attempts. As stated in HW ERRATA if
|
|
* more than one second between two time reads is detected
|
|
* then read once again.
|
|
*/
|
|
time_check = readl(rtc->regs + RTC_TIME);
|
|
if ((time_check - time) > 1)
|
|
time_check = readl(rtc->regs + RTC_TIME);
|
|
|
|
mutex_unlock(&rtc->mutex_time);
|
|
|
|
rtc_time_to_tm(time_check, tm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
unsigned long time;
|
|
|
|
ret = rtc_tm_to_time(tm, &time);
|
|
|
|
if (ret)
|
|
goto out;
|
|
/*
|
|
* Setting the RTC time not always succeeds. According to the
|
|
* errata we need to first write on the status register and
|
|
* then wait for 100ms before writing to the time register to be
|
|
* sure that the data will be taken into account.
|
|
*/
|
|
mutex_lock(&rtc->mutex_time);
|
|
rtc_delayed_write(0, rtc, RTC_STATUS);
|
|
msleep(100);
|
|
rtc_delayed_write(time, rtc, RTC_TIME);
|
|
mutex_unlock(&rtc->mutex_time);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int armada38x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
unsigned long time, flags;
|
|
u32 val;
|
|
|
|
spin_lock_irqsave(&rtc->lock, flags);
|
|
|
|
time = readl(rtc->regs + RTC_ALARM1);
|
|
val = readl(rtc->regs + RTC_IRQ1_CONF) & RTC_IRQ1_AL_EN;
|
|
|
|
spin_unlock_irqrestore(&rtc->lock, flags);
|
|
|
|
alrm->enabled = val ? 1 : 0;
|
|
rtc_time_to_tm(time, &alrm->time);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada38x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
unsigned long time, flags;
|
|
int ret = 0;
|
|
u32 val;
|
|
|
|
ret = rtc_tm_to_time(&alrm->time, &time);
|
|
|
|
if (ret)
|
|
goto out;
|
|
|
|
spin_lock_irqsave(&rtc->lock, flags);
|
|
|
|
rtc_delayed_write(time, rtc, RTC_ALARM1);
|
|
|
|
if (alrm->enabled) {
|
|
rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF);
|
|
val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT);
|
|
writel(val | SOC_RTC_ALARM1_MASK,
|
|
rtc->regs_soc + SOC_RTC_INTERRUPT);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&rtc->lock, flags);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int armada38x_rtc_alarm_irq_enable(struct device *dev,
|
|
unsigned int enabled)
|
|
{
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&rtc->lock, flags);
|
|
|
|
if (enabled)
|
|
rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF);
|
|
else
|
|
rtc_delayed_write(0, rtc, RTC_IRQ1_CONF);
|
|
|
|
spin_unlock_irqrestore(&rtc->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t armada38x_rtc_alarm_irq(int irq, void *data)
|
|
{
|
|
struct armada38x_rtc *rtc = data;
|
|
u32 val;
|
|
int event = RTC_IRQF | RTC_AF;
|
|
|
|
dev_dbg(&rtc->rtc_dev->dev, "%s:irq(%d)\n", __func__, irq);
|
|
|
|
spin_lock(&rtc->lock);
|
|
|
|
val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT);
|
|
|
|
writel(val & ~SOC_RTC_ALARM1, rtc->regs_soc + SOC_RTC_INTERRUPT);
|
|
val = readl(rtc->regs + RTC_IRQ1_CONF);
|
|
/* disable all the interrupts for alarm 1 */
|
|
rtc_delayed_write(0, rtc, RTC_IRQ1_CONF);
|
|
/* Ack the event */
|
|
rtc_delayed_write(RTC_STATUS_ALARM1, rtc, RTC_STATUS);
|
|
|
|
spin_unlock(&rtc->lock);
|
|
|
|
if (val & RTC_IRQ1_FREQ_EN) {
|
|
if (val & RTC_IRQ1_FREQ_1HZ)
|
|
event |= RTC_UF;
|
|
else
|
|
event |= RTC_PF;
|
|
}
|
|
|
|
rtc_update_irq(rtc->rtc_dev, 1, event);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct rtc_class_ops armada38x_rtc_ops = {
|
|
.read_time = armada38x_rtc_read_time,
|
|
.set_time = armada38x_rtc_set_time,
|
|
.read_alarm = armada38x_rtc_read_alarm,
|
|
.set_alarm = armada38x_rtc_set_alarm,
|
|
.alarm_irq_enable = armada38x_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
static __init int armada38x_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct armada38x_rtc *rtc;
|
|
int ret;
|
|
|
|
rtc = devm_kzalloc(&pdev->dev, sizeof(struct armada38x_rtc),
|
|
GFP_KERNEL);
|
|
if (!rtc)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&rtc->lock);
|
|
mutex_init(&rtc->mutex_time);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc");
|
|
rtc->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(rtc->regs))
|
|
return PTR_ERR(rtc->regs);
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc-soc");
|
|
rtc->regs_soc = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(rtc->regs_soc))
|
|
return PTR_ERR(rtc->regs_soc);
|
|
|
|
rtc->irq = platform_get_irq(pdev, 0);
|
|
|
|
if (rtc->irq < 0) {
|
|
dev_err(&pdev->dev, "no irq\n");
|
|
return rtc->irq;
|
|
}
|
|
if (devm_request_irq(&pdev->dev, rtc->irq, armada38x_rtc_alarm_irq,
|
|
0, pdev->name, rtc) < 0) {
|
|
dev_warn(&pdev->dev, "Interrupt not available.\n");
|
|
rtc->irq = -1;
|
|
/*
|
|
* If there is no interrupt available then we can't
|
|
* use the alarm
|
|
*/
|
|
armada38x_rtc_ops.set_alarm = NULL;
|
|
armada38x_rtc_ops.alarm_irq_enable = NULL;
|
|
}
|
|
platform_set_drvdata(pdev, rtc);
|
|
if (rtc->irq != -1)
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
|
|
&armada38x_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(rtc->rtc_dev)) {
|
|
ret = PTR_ERR(rtc->rtc_dev);
|
|
dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int armada38x_rtc_suspend(struct device *dev)
|
|
{
|
|
if (device_may_wakeup(dev)) {
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
|
|
return enable_irq_wake(rtc->irq);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada38x_rtc_resume(struct device *dev)
|
|
{
|
|
if (device_may_wakeup(dev)) {
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
|
|
return disable_irq_wake(rtc->irq);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(armada38x_rtc_pm_ops,
|
|
armada38x_rtc_suspend, armada38x_rtc_resume);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id armada38x_rtc_of_match_table[] = {
|
|
{ .compatible = "marvell,armada-380-rtc", },
|
|
{}
|
|
};
|
|
#endif
|
|
|
|
static struct platform_driver armada38x_rtc_driver = {
|
|
.driver = {
|
|
.name = "armada38x-rtc",
|
|
.pm = &armada38x_rtc_pm_ops,
|
|
.of_match_table = of_match_ptr(armada38x_rtc_of_match_table),
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(armada38x_rtc_driver, armada38x_rtc_probe);
|
|
|
|
MODULE_DESCRIPTION("Marvell Armada 38x RTC driver");
|
|
MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
|
|
MODULE_LICENSE("GPL");
|