leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fef062cbf2
linux/drivers/tty/serial
History
Peter Hurley fef062cbf2 tty: Remove ASYNC_CLOSING checks in open()/hangup() methods 
Since at least before 2.6.30, tty drivers that do not drop the tty lock
while closing cannot observe ASYNC_CLOSING set while holding the
tty lock; this includes the tty driver's open() and hangup() methods,
since the tty core calls these methods holding the tty lock.

For these drivers, waiting for ASYNC_CLOSING to clear while opening
is not required, since this condition cannot occur. Similarly, even
when the open() method drops and reacquires the tty lock after
blocking, ASYNC_CLOSING cannot be set (again, for drivers that
do not drop the tty lock while closing).

Now that tty port drivers no longer drop the tty lock while closing
(since 'tty: Remove tty_wait_until_sent_from_close()'), the same
conditions apply: waiting for ASYNC_CLOSING to clear while opening
is not required, nor is re-checking ASYNC_CLOSING after dropping and
reacquiring the tty lock while blocking (eg., in *_block_til_ready()).

Note: The ASYNC_CLOSING flag state is still maintained since several
bitrotting drivers use it for (dubious) other purposes.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17 21:11:29 -07:00
..
8250 serial: 8250_omap: Remove RTS clear 2015-10-17 21:05:46 -07:00
cpm_uart tty: serial: cpm_uart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
jsm serial: jsm: some off by one bugs 2015-03-26 23:00:36 +01:00
21285.c
68328serial.c serial: 68328serial: Use NULL for pointers 2015-10-04 17:44:52 +01:00
altera_jtaguart.c drivers/tty/serial: altera: fix typos in #endif comments 2015-05-06 22:26:58 +02:00
altera_uart.c serial: altera_uart: Use of_property_read_u32 instead of open-coding it 2015-10-04 17:47:49 +01:00
amba-pl010.c
amba-pl011.c Revert "uart: pl011: Rename regs with enumeration" 2015-09-04 09:14:43 -07:00
apbuart.c tty: serial: apbuart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
apbuart.h
ar933x_uart.c serial: ar933x_uart: Fix off-by-one for checking valid alias id 2015-03-07 03:20:25 +01:00
arc_uart.c
atmel_serial.c serial: atmel: fix compiler warning on address cast 2015-10-17 21:00:11 -07:00
bcm63xx_uart.c tty: serial/bcm63xx_uart: fix sparse warning 2015-03-07 03:13:07 +01:00
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c serial: bfin: ctsrts: enfore Kconfig naming convention 2015-05-06 22:26:59 +02:00
clps711x.c serial: mctrl-gpio: rename init function 2015-10-04 18:46:43 +01:00
crisv10.c tty: Remove ASYNC_CLOSING checks in open()/hangup() methods 2015-10-17 21:11:29 -07:00
crisv10.h
digicolor-usart.c tty/serial: digicolor: remove sysrq reference 2015-02-02 10:11:25 -08:00
dz.c
dz.h
earlycon-arm-semihost.c
earlycon.c serial: earlycon: Add support for big-endian MMIO accesses 2015-06-01 06:55:12 +09:00
efm32-uart.c
etraxfs-uart.c serial: etraxfs-uart: use mctrl_gpio helpers for handling modem signals 2015-08-04 22:07:20 -07:00
fsl_lpuart.c Merge 4.0-rc7 into tty-next 2015-04-07 11:07:20 +02:00
icom.c tty: icom.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
icom.h
ifx6x60.c serial: ifx6x60: Remove superfluous casts when calling request_irq() 2015-05-06 22:27:01 +02:00
ifx6x60.h
imx.c Merge 4.3-rc5 into tty-next 2015-10-12 10:54:35 -07:00
ioc3_serial.c tty: ioc3_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ioc4_serial.c tty: ioc4_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ip22zilog.c
ip22zilog.h
Kconfig serial: mxs-auart+imx: allow compile testing on non-Freescale architectures 2015-10-04 18:46:43 +01:00
kgdb_nmi.c serial: kgdb_nmi: Use bool function return values of true/false not 1/0 2015-05-06 22:26:57 +02:00
kgdboc.c
lantiq.c drivers/tty: make serial/lantic.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
lpc32xx_hs.c tty: serial: lpc32xx_hs: fix handling platform_get_irq result 2015-10-04 19:09:21 +01:00
m32r_sio_reg.h
m32r_sio.c
m32r_sio.h
Makefile serial: stm32-usart: Add STM32 USART Driver 2015-06-10 17:34:26 -07:00
max310x.c
max3100.c tty: max3100: use msecs_to_jiffies for time conversion 2015-03-07 03:13:08 +01:00
mcf.c drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE 2015-05-06 22:26:59 +02:00
men_z135_uart.c tty: serial: men_z135_uart.c: use mcb memory region size instead of hardcoded one 2015-10-17 21:05:43 -07:00
meson_uart.c ARM: meson: serial: convert iounmap to devm_iounmap 2015-05-06 22:27:02 +02:00
mpc52xx_uart.c serial: mpc52xx: add delay after resetting transmitter to fix broken chars 2015-10-04 17:27:56 +01:00
mpsc.c mpsc: use dma_set_mask insted of dma_supported 2015-10-04 19:14:26 +01:00
msm_serial.c tty: serial: msm: Remove 115.2 Kbps maximum baud rate limitation 2015-10-04 19:15:17 +01:00
msm_serial.h tty: serial: msm: Add RX DMA support 2015-10-04 19:15:17 +01:00
mux.c serial: mux: Convert to uart_console_device instead of open-coded 2015-10-04 17:44:52 +01:00
mxs-auart.c serial: mctrl-gpio: rename init function 2015-10-04 18:46:43 +01:00
netx-serial.c
nwpserial.c
of_serial.c serial: Enable Freescale 16550 workaround on arm 2015-10-17 21:05:46 -07:00
omap-serial.c serial: omap: remove warnings about unused functions 2015-10-04 19:14:26 +01:00
pch_uart.c
pmac_zilog.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
pmac_zilog.h
pnx8xxx_uart.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
pxa.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
rp2.c
sa1100.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
samsung.c serial: samsung: Fix UART status handling in DMA mode 2015-10-04 17:44:52 +01:00
samsung.h serial: samsung: fix DMA mode enter condition for small FIFO sizes 2015-08-04 22:07:23 -07:00
sb1250-duart.c
sc16is7xx.c sc16is7xx: null ptr check 2015-10-04 19:14:26 +01:00
sccnxp.c
serial_core.c serial_core: support native endianness 2015-10-04 19:11:05 +01:00
serial_ks8695.c tty/serial: kill off set_irq_flags usage 2015-06-09 12:26:32 -07:00
serial_mctrl_gpio.c serial: mctrl_gpio: implement interrupt handling 2015-10-04 18:47:51 +01:00
serial_mctrl_gpio.h serial: mctrl_gpio: implement interrupt handling 2015-10-04 18:47:51 +01:00
serial_txx9.c
serial-tegra.c serial: tegra: Add helper function for handling RX buffer 2015-10-17 21:07:57 -07:00
sh-sci.c serial: sh-sci: Add DT support to DMA setup 2015-10-04 17:36:10 +01:00
sh-sci.h serial: sh-sci: Correct SCIF_ERROR_CLEAR for plain SCIF 2015-10-04 17:33:48 +01:00
sirfsoc_uart.c serial: sirf: let uart's receive start in right place 2015-07-23 15:32:04 -07:00
sirfsoc_uart.h serial: sirf: let uart's receive start in right place 2015-07-23 15:32:04 -07:00
sn_console.c drivers/tty: make serial/sn_console.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sprd_serial.c tty: serial: sprd: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
st-asc.c tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND 2015-10-04 19:11:05 +01:00
stm32-usart.c tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND 2015-10-04 19:11:05 +01:00
suncore.c drivers/tty: make serial/suncore.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sunhv.c drivers/tty: make serial/sunhv.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sunsab.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
sunsab.h
sunsu.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
sunzilog.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
sunzilog.h
tilegx.c
timbuart.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
timbuart.h
uartlite.c serial: xilinx: Use platform_get_irq to get irq description structure 2015-04-28 14:26:21 +02:00
ucc_uart.c serial/uuc_uart: Support higher bitrates than 115200 Bit/s 2015-07-23 18:05:00 -07:00
vr41xx_siu.c
vt8500_serial.c
xilinx_uartps.c serial: xuartps: add __init to earlycon write method 2015-05-10 19:10:08 +02:00
zs.c
zs.h