forked from Minki/linux
121354b2ec
PNI RM3100 is a high resolution, large signal immunity magnetometer,
composed of 3 single sensors and a processing chip with a MagI2C
interface.
Following functions are available:
- Single-shot measurement from
/sys/bus/iio/devices/iio:deviceX/in_magn_{axis}_raw
- Triggerd buffer measurement.
- DRDY pin for data ready trigger.
- Both i2c and spi interface are supported.
- Both interrupt and polling measurement is supported, depends on if
the 'interrupts' in DT is declared.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
31 lines
1.0 KiB
Makefile
31 lines
1.0 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Makefile for industrial I/O Magnetometer sensor drivers
|
|
#
|
|
|
|
# When adding new entries keep the list in alphabetical order
|
|
obj-$(CONFIG_AK8974) += ak8974.o
|
|
obj-$(CONFIG_AK8975) += ak8975.o
|
|
obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o
|
|
obj-$(CONFIG_BMC150_MAGN_I2C) += bmc150_magn_i2c.o
|
|
obj-$(CONFIG_BMC150_MAGN_SPI) += bmc150_magn_spi.o
|
|
|
|
obj-$(CONFIG_MAG3110) += mag3110.o
|
|
obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o
|
|
obj-$(CONFIG_MMC35240) += mmc35240.o
|
|
|
|
obj-$(CONFIG_IIO_ST_MAGN_3AXIS) += st_magn.o
|
|
st_magn-y := st_magn_core.o
|
|
st_magn-$(CONFIG_IIO_BUFFER) += st_magn_buffer.o
|
|
|
|
obj-$(CONFIG_IIO_ST_MAGN_I2C_3AXIS) += st_magn_i2c.o
|
|
obj-$(CONFIG_IIO_ST_MAGN_SPI_3AXIS) += st_magn_spi.o
|
|
|
|
obj-$(CONFIG_SENSORS_HMC5843) += hmc5843_core.o
|
|
obj-$(CONFIG_SENSORS_HMC5843_I2C) += hmc5843_i2c.o
|
|
obj-$(CONFIG_SENSORS_HMC5843_SPI) += hmc5843_spi.o
|
|
|
|
obj-$(CONFIG_SENSORS_RM3100) += rm3100-core.o
|
|
obj-$(CONFIG_SENSORS_RM3100_I2C) += rm3100-i2c.o
|
|
obj-$(CONFIG_SENSORS_RM3100_SPI) += rm3100-spi.o
|