linux/drivers/iio/accel/st_accel_i2c.c
Denis Ciocca feba6b18c9 iio:accel: device settings are set immediately during probe
This patch set accel settings right after probe start. This is
done in preparation of regmap that needs different configuration
based on multiread bit value.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27 22:52:05 +01:00

208 lines
4.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* STMicroelectronics accelerometers driver
*
* Copyright 2012-2013 STMicroelectronics Inc.
*
* Denis Ciocca <denis.ciocca@st.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/property.h>
#include <linux/iio/common/st_sensors_i2c.h>
#include "st_accel.h"
#ifdef CONFIG_OF
static const struct of_device_id st_accel_of_match[] = {
{
/* An older compatible */
.compatible = "st,lis3lv02d",
.data = LIS3LV02DL_ACCEL_DEV_NAME,
},
{
.compatible = "st,lis3lv02dl-accel",
.data = LIS3LV02DL_ACCEL_DEV_NAME,
},
{
.compatible = "st,lsm303dlh-accel",
.data = LSM303DLH_ACCEL_DEV_NAME,
},
{
.compatible = "st,lsm303dlhc-accel",
.data = LSM303DLHC_ACCEL_DEV_NAME,
},
{
.compatible = "st,lis3dh-accel",
.data = LIS3DH_ACCEL_DEV_NAME,
},
{
.compatible = "st,lsm330d-accel",
.data = LSM330D_ACCEL_DEV_NAME,
},
{
.compatible = "st,lsm330dl-accel",
.data = LSM330DL_ACCEL_DEV_NAME,
},
{
.compatible = "st,lsm330dlc-accel",
.data = LSM330DLC_ACCEL_DEV_NAME,
},
{
.compatible = "st,lis331dl-accel",
.data = LIS331DL_ACCEL_DEV_NAME,
},
{
.compatible = "st,lis331dlh-accel",
.data = LIS331DLH_ACCEL_DEV_NAME,
},
{
.compatible = "st,lsm303dl-accel",
.data = LSM303DL_ACCEL_DEV_NAME,
},
{
.compatible = "st,lsm303dlm-accel",
.data = LSM303DLM_ACCEL_DEV_NAME,
},
{
.compatible = "st,lsm330-accel",
.data = LSM330_ACCEL_DEV_NAME,
},
{
.compatible = "st,lsm303agr-accel",
.data = LSM303AGR_ACCEL_DEV_NAME,
},
{
.compatible = "st,lis2dh12-accel",
.data = LIS2DH12_ACCEL_DEV_NAME,
},
{
.compatible = "st,h3lis331dl-accel",
.data = H3LIS331DL_ACCEL_DEV_NAME,
},
{
.compatible = "st,lis3l02dq",
.data = LIS3L02DQ_ACCEL_DEV_NAME,
},
{
.compatible = "st,lng2dm-accel",
.data = LNG2DM_ACCEL_DEV_NAME,
},
{
.compatible = "st,lis2dw12",
.data = LIS2DW12_ACCEL_DEV_NAME,
},
{
.compatible = "st,lis3de",
.data = LIS3DE_ACCEL_DEV_NAME,
},
{
.compatible = "st,lis2de12",
.data = LIS2DE12_ACCEL_DEV_NAME,
},
{},
};
MODULE_DEVICE_TABLE(of, st_accel_of_match);
#else
#define st_accel_of_match NULL
#endif
#ifdef CONFIG_ACPI
static const struct acpi_device_id st_accel_acpi_match[] = {
{"SMO8840", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME},
{"SMO8A90", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME},
{ },
};
MODULE_DEVICE_TABLE(acpi, st_accel_acpi_match);
#else
#define st_accel_acpi_match NULL
#endif
static const struct i2c_device_id st_accel_id_table[] = {
{ LSM303DLH_ACCEL_DEV_NAME },
{ LSM303DLHC_ACCEL_DEV_NAME },
{ LIS3DH_ACCEL_DEV_NAME },
{ LSM330D_ACCEL_DEV_NAME },
{ LSM330DL_ACCEL_DEV_NAME },
{ LSM330DLC_ACCEL_DEV_NAME },
{ LIS331DLH_ACCEL_DEV_NAME },
{ LSM303DL_ACCEL_DEV_NAME },
{ LSM303DLM_ACCEL_DEV_NAME },
{ LSM330_ACCEL_DEV_NAME },
{ LSM303AGR_ACCEL_DEV_NAME },
{ LIS2DH12_ACCEL_DEV_NAME },
{ LIS3L02DQ_ACCEL_DEV_NAME },
{ LNG2DM_ACCEL_DEV_NAME },
{ H3LIS331DL_ACCEL_DEV_NAME },
{ LIS331DL_ACCEL_DEV_NAME },
{ LIS3LV02DL_ACCEL_DEV_NAME },
{ LIS2DW12_ACCEL_DEV_NAME },
{ LIS3DE_ACCEL_DEV_NAME },
{ LIS2DE12_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
static int st_accel_i2c_probe(struct i2c_client *client)
{
const struct st_sensor_settings *settings;
struct st_sensor_data *adata;
struct iio_dev *indio_dev;
const char *match;
int ret;
match = device_get_match_data(&client->dev);
if (match)
strlcpy(client->name, match, sizeof(client->name));
settings = st_accel_get_settings(client->name);
if (!settings) {
dev_err(&client->dev, "device name %s not recognized.\n",
client->name);
return -ENODEV;
}
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adata));
if (!indio_dev)
return -ENOMEM;
adata = iio_priv(indio_dev);
adata->sensor_settings = (struct st_sensor_settings *)settings;
st_sensors_i2c_configure(indio_dev, client, adata);
ret = st_accel_common_probe(indio_dev);
if (ret < 0)
return ret;
return 0;
}
static int st_accel_i2c_remove(struct i2c_client *client)
{
st_accel_common_remove(i2c_get_clientdata(client));
return 0;
}
static struct i2c_driver st_accel_driver = {
.driver = {
.name = "st-accel-i2c",
.of_match_table = of_match_ptr(st_accel_of_match),
.acpi_match_table = ACPI_PTR(st_accel_acpi_match),
},
.probe_new = st_accel_i2c_probe,
.remove = st_accel_i2c_remove,
.id_table = st_accel_id_table,
};
module_i2c_driver(st_accel_driver);
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
MODULE_LICENSE("GPL v2");