linux/net/wireless/core.c
Linus Torvalds 9d31d23389 Networking changes for 5.13.
Core:
 
  - bpf:
 	- allow bpf programs calling kernel functions (initially to
 	  reuse TCP congestion control implementations)
 	- enable task local storage for tracing programs - remove the
 	  need to store per-task state in hash maps, and allow tracing
 	  programs access to task local storage previously added for
 	  BPF_LSM
 	- add bpf_for_each_map_elem() helper, allowing programs to
 	  walk all map elements in a more robust and easier to verify
 	  fashion
 	- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
 	  redirection
 	- lpm: add support for batched ops in LPM trie
 	- add BTF_KIND_FLOAT support - mostly to allow use of BTF
 	  on s390 which has floats in its headers files
 	- improve BPF syscall documentation and extend the use of kdoc
 	  parsing scripts we already employ for bpf-helpers
 	- libbpf, bpftool: support static linking of BPF ELF files
 	- improve support for encapsulation of L2 packets
 
  - xdp: restructure redirect actions to avoid a runtime lookup,
 	improving performance by 4-8% in microbenchmarks
 
  - xsk: build skb by page (aka generic zerocopy xmit) - improve
 	performance of software AF_XDP path by 33% for devices
 	which don't need headers in the linear skb part (e.g. virtio)
 
  - nexthop: resilient next-hop groups - improve path stability
 	on next-hops group changes (incl. offload for mlxsw)
 
  - ipv6: segment routing: add support for IPv4 decapsulation
 
  - icmp: add support for RFC 8335 extended PROBE messages
 
  - inet: use bigger hash table for IP ID generation
 
  - tcp: deal better with delayed TX completions - make sure we don't
 	give up on fast TCP retransmissions only because driver is
 	slow in reporting that it completed transmitting the original
 
  - tcp: reorder tcp_congestion_ops for better cache locality
 
  - mptcp:
 	- add sockopt support for common TCP options
 	- add support for common TCP msg flags
 	- include multiple address ids in RM_ADDR
 	- add reset option support for resetting one subflow
 
  - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
 	co-existence with UDP tunnel GRO, allowing the first to take
 	place correctly	even for encapsulated UDP traffic
 
  - micro-optimize dev_gro_receive() and flow dissection, avoid
 	retpoline overhead on VLAN and TEB GRO
 
  - use less memory for sysctls, add a new sysctl type, to allow using
 	u8 instead of "int" and "long" and shrink networking sysctls
 
  - veth: allow GRO without XDP - this allows aggregating UDP
 	packets before handing them off to routing, bridge, OvS, etc.
 
  - allow specifing ifindex when device is moved to another namespace
 
  - netfilter:
 	- nft_socket: add support for cgroupsv2
 	- nftables: add catch-all set element - special element used
 	  to define a default action in case normal lookup missed
 	- use net_generic infra in many modules to avoid allocating
 	  per-ns memory unnecessarily
 
  - xps: improve the xps handling to avoid potential out-of-bound
 	accesses and use-after-free when XPS change race with other
 	re-configuration under traffic
 
  - add a config knob to turn off per-cpu netdev refcnt to catch
 	underflows in testing
 
 Device APIs:
 
  - add WWAN subsystem to organize the WWAN interfaces better and
    hopefully start driving towards more unified and vendor-
    -independent APIs
 
  - ethtool:
 	- add interface for reading IEEE MIB stats (incl. mlx5 and
 	  bnxt support)
 	- allow network drivers to dump arbitrary SFP EEPROM data,
 	  current offset+length API was a poor fit for modern SFP
 	  which define EEPROM in terms of pages (incl. mlx5 support)
 
  - act_police, flow_offload: add support for packet-per-second
 	policing (incl. offload for nfp)
 
  - psample: add additional metadata attributes like transit delay
 	for packets sampled from switch HW (and corresponding egress
 	and policy-based sampling in the mlxsw driver)
 
  - dsa: improve support for sandwiched LAGs with bridge and DSA
 
  - netfilter:
 	- flowtable: use direct xmit in topologies with IP
 	  forwarding, bridging, vlans etc.
 	- nftables: counter hardware offload support
 
  - Bluetooth:
 	- improvements for firmware download w/ Intel devices
 	- add support for reading AOSP vendor capabilities
 	- add support for virtio transport driver
 
  - mac80211:
 	- allow concurrent monitor iface and ethernet rx decap
 	- set priority and queue mapping for injected frames
 
  - phy: add support for Clause-45 PHY Loopback
 
  - pci/iov: add sysfs MSI-X vector assignment interface
 	to distribute MSI-X resources to VFs (incl. mlx5 support)
 
 New hardware/drivers:
 
  - dsa: mv88e6xxx: add support for Marvell mv88e6393x -
 	11-port Ethernet switch with 8x 1-Gigabit Ethernet
 	and 3x 10-Gigabit interfaces.
 
  - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
 	and BCM63xx switches
 
  - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
 
  - ath11k: support for QCN9074 a 802.11ax device
 
  - Bluetooth: Broadcom BCM4330 and BMC4334
 
  - phy: Marvell 88X2222 transceiver support
 
  - mdio: add BCM6368 MDIO mux bus controller
 
  - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
 
  - mana: driver for Microsoft Azure Network Adapter (MANA)
 
  - Actions Semi Owl Ethernet MAC
 
  - can: driver for ETAS ES58X CAN/USB interfaces
 
 Pure driver changes:
 
  - add XDP support to: enetc, igc, stmmac
  - add AF_XDP support to: stmmac
 
  - virtio:
 	- page_to_skb() use build_skb when there's sufficient tailroom
 	  (21% improvement for 1000B UDP frames)
 	- support XDP even without dedicated Tx queues - share the Tx
 	  queues with the stack when necessary
 
  - mlx5:
 	- flow rules: add support for mirroring with conntrack,
 	  matching on ICMP, GTP, flex filters and more
 	- support packet sampling with flow offloads
 	- persist uplink representor netdev across eswitch mode
 	  changes
 	- allow coexistence of CQE compression and HW time-stamping
 	- add ethtool extended link error state reporting
 
  - ice, iavf: support flow filters, UDP Segmentation Offload
 
  - dpaa2-switch:
 	- move the driver out of staging
 	- add spanning tree (STP) support
 	- add rx copybreak support
 	- add tc flower hardware offload on ingress traffic
 
  - ionic:
 	- implement Rx page reuse
 	- support HW PTP time-stamping
 
  - octeon: support TC hardware offloads - flower matching on ingress
 	and egress ratelimitting.
 
  - stmmac:
 	- add RX frame steering based on VLAN priority in tc flower
 	- support frame preemption (FPE)
 	- intel: add cross time-stamping freq difference adjustment
 
  - ocelot:
 	- support forwarding of MRP frames in HW
 	- support multiple bridges
 	- support PTP Sync one-step timestamping
 
  - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
 	learning, flooding etc.
 
  - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
 	SC7280 SoCs)
 
  - mt7601u: enable TDLS support
 
  - mt76:
 	- add support for 802.3 rx frames (mt7915/mt7615)
 	- mt7915 flash pre-calibration support
 	- mt7921/mt7663 runtime power management fixes
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmCKFPIACgkQMUZtbf5S
 Irtw0g/+NA8bWdHNgG4H5rya0pv2z3IieLRmSdDfKRQQXcJpklawc5MKVVaTee/Q
 5/QqgPdCsu1LAU6JXBKsKmyDDaMlQKdWuKbOqDSiAQKoMesZStTEHf9d851ZzgxA
 Cdb6O7BD3lBl/IN+oxNG+KcmD1LKquTPKGySq2mQtEdLO12ekAsranzmj4voKffd
 q9tBShpXQ7Dq77DLYfiQXVCvsizNcbbJFuxX0o9Lpb9+61ZyYAbogZSa9ypiZZwR
 I/9azRBtJg7UV1aD/cLuAfy66Qh7t63+rCxVazs5Os8jVO26P/jQdisnnOe/x+p9
 wYEmKm3GSu0V4SAPxkWW+ooKusflCeqDoMIuooKt6kbP6BRj540veGw3Ww/m5YFr
 7pLQkTSP/tSjuGQIdBE1LOP5LBO8DZeC8Kiop9V0fzAW9hFSZbEq25WW0bPj8QQO
 zA4Z7yWlslvxcfY2BdJX3wD8klaINkl/8fDWZFFsBdfFX2VeLtm7Xfduw34BJpvU
 rYT3oWr6PhtkPAKR32SUcemSfeWgIVU41eSshzRz3kez1NngBUuLlSGGSEaKbes5
 pZVt6pYFFVByyf6MTHFEoQvafZfEw04JILZpo4R5V8iTHzom0kD3Py064sBiXEw2
 B6t+OW4qgcxGblpFkK2lD4kR2s1TPUs0ckVO6sAy1x8q60KKKjY=
 =vcbA
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...
2021-04-29 11:57:23 -07:00

1602 lines
40 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* This is the linux wireless configuration interface.
*
* Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright 2015-2017 Intel Deutschland GmbH
* Copyright (C) 2018-2020 Intel Corporation
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/if.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/nl80211.h>
#include <linux/debugfs.h>
#include <linux/notifier.h>
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
#include <linux/sched.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
#include "nl80211.h"
#include "core.h"
#include "sysfs.h"
#include "debugfs.h"
#include "wext-compat.h"
#include "rdev-ops.h"
/* name for sysfs, %d is appended */
#define PHY_NAME "phy"
MODULE_AUTHOR("Johannes Berg");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("wireless configuration support");
MODULE_ALIAS_GENL_FAMILY(NL80211_GENL_NAME);
/* RCU-protected (and RTNL for writers) */
LIST_HEAD(cfg80211_rdev_list);
int cfg80211_rdev_list_generation;
/* for debugfs */
static struct dentry *ieee80211_debugfs_dir;
/* for the cleanup, scan and event works */
struct workqueue_struct *cfg80211_wq;
static bool cfg80211_disable_40mhz_24ghz;
module_param(cfg80211_disable_40mhz_24ghz, bool, 0644);
MODULE_PARM_DESC(cfg80211_disable_40mhz_24ghz,
"Disable 40MHz support in the 2.4GHz band");
struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx)
{
struct cfg80211_registered_device *result = NULL, *rdev;
ASSERT_RTNL();
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
if (rdev->wiphy_idx == wiphy_idx) {
result = rdev;
break;
}
}
return result;
}
int get_wiphy_idx(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
return rdev->wiphy_idx;
}
struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx)
{
struct cfg80211_registered_device *rdev;
ASSERT_RTNL();
rdev = cfg80211_rdev_by_wiphy_idx(wiphy_idx);
if (!rdev)
return NULL;
return &rdev->wiphy;
}
static int cfg80211_dev_check_name(struct cfg80211_registered_device *rdev,
const char *newname)
{
struct cfg80211_registered_device *rdev2;
int wiphy_idx, taken = -1, digits;
ASSERT_RTNL();
if (strlen(newname) > NL80211_WIPHY_NAME_MAXLEN)
return -EINVAL;
/* prohibit calling the thing phy%d when %d is not its number */
sscanf(newname, PHY_NAME "%d%n", &wiphy_idx, &taken);
if (taken == strlen(newname) && wiphy_idx != rdev->wiphy_idx) {
/* count number of places needed to print wiphy_idx */
digits = 1;
while (wiphy_idx /= 10)
digits++;
/*
* deny the name if it is phy<idx> where <idx> is printed
* without leading zeroes. taken == strlen(newname) here
*/
if (taken == strlen(PHY_NAME) + digits)
return -EINVAL;
}
/* Ensure another device does not already have this name. */
list_for_each_entry(rdev2, &cfg80211_rdev_list, list)
if (strcmp(newname, wiphy_name(&rdev2->wiphy)) == 0)
return -EINVAL;
return 0;
}
int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
char *newname)
{
int result;
ASSERT_RTNL();
/* Ignore nop renames */
if (strcmp(newname, wiphy_name(&rdev->wiphy)) == 0)
return 0;
result = cfg80211_dev_check_name(rdev, newname);
if (result < 0)
return result;
result = device_rename(&rdev->wiphy.dev, newname);
if (result)
return result;
if (!IS_ERR_OR_NULL(rdev->wiphy.debugfsdir))
debugfs_rename(rdev->wiphy.debugfsdir->d_parent,
rdev->wiphy.debugfsdir,
rdev->wiphy.debugfsdir->d_parent, newname);
nl80211_notify_wiphy(rdev, NL80211_CMD_NEW_WIPHY);
return 0;
}
int cfg80211_switch_netns(struct cfg80211_registered_device *rdev,
struct net *net)
{
struct wireless_dev *wdev;
int err = 0;
if (!(rdev->wiphy.flags & WIPHY_FLAG_NETNS_OK))
return -EOPNOTSUPP;
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
if (!wdev->netdev)
continue;
wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
err = dev_change_net_namespace(wdev->netdev, net, "wlan%d");
if (err)
break;
wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
}
if (err) {
/* failed -- clean up to old netns */
net = wiphy_net(&rdev->wiphy);
list_for_each_entry_continue_reverse(wdev,
&rdev->wiphy.wdev_list,
list) {
if (!wdev->netdev)
continue;
wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
err = dev_change_net_namespace(wdev->netdev, net,
"wlan%d");
WARN_ON(err);
wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
}
return err;
}
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
if (!wdev->netdev)
continue;
nl80211_notify_iface(rdev, wdev, NL80211_CMD_DEL_INTERFACE);
}
nl80211_notify_wiphy(rdev, NL80211_CMD_DEL_WIPHY);
wiphy_net_set(&rdev->wiphy, net);
err = device_rename(&rdev->wiphy.dev, dev_name(&rdev->wiphy.dev));
WARN_ON(err);
nl80211_notify_wiphy(rdev, NL80211_CMD_NEW_WIPHY);
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
if (!wdev->netdev)
continue;
nl80211_notify_iface(rdev, wdev, NL80211_CMD_NEW_INTERFACE);
}
return 0;
}
static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data)
{
struct cfg80211_registered_device *rdev = data;
rdev_rfkill_poll(rdev);
}
void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
{
lockdep_assert_held(&rdev->wiphy.mtx);
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_P2P_DEVICE))
return;
if (!wdev_running(wdev))
return;
rdev_stop_p2p_device(rdev, wdev);
wdev->is_running = false;
rdev->opencount--;
if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
if (WARN_ON(!rdev->scan_req->notified &&
(!rdev->int_scan_req ||
!rdev->int_scan_req->notified)))
rdev->scan_req->info.aborted = true;
___cfg80211_scan_done(rdev, false);
}
}
void cfg80211_stop_nan(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
{
lockdep_assert_held(&rdev->wiphy.mtx);
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_NAN))
return;
if (!wdev_running(wdev))
return;
rdev_stop_nan(rdev, wdev);
wdev->is_running = false;
rdev->opencount--;
}
void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct wireless_dev *wdev;
ASSERT_RTNL();
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
if (wdev->netdev) {
dev_close(wdev->netdev);
continue;
}
/* otherwise, check iftype */
wiphy_lock(wiphy);
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
cfg80211_stop_p2p_device(rdev, wdev);
break;
case NL80211_IFTYPE_NAN:
cfg80211_stop_nan(rdev, wdev);
break;
default:
break;
}
wiphy_unlock(wiphy);
}
}
EXPORT_SYMBOL_GPL(cfg80211_shutdown_all_interfaces);
static int cfg80211_rfkill_set_block(void *data, bool blocked)
{
struct cfg80211_registered_device *rdev = data;
if (!blocked)
return 0;
rtnl_lock();
cfg80211_shutdown_all_interfaces(&rdev->wiphy);
rtnl_unlock();
return 0;
}
static void cfg80211_rfkill_block_work(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
rdev = container_of(work, struct cfg80211_registered_device,
rfkill_block);
cfg80211_rfkill_set_block(rdev, true);
}
static void cfg80211_event_work(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
rdev = container_of(work, struct cfg80211_registered_device,
event_work);
wiphy_lock(&rdev->wiphy);
cfg80211_process_rdev_events(rdev);
wiphy_unlock(&rdev->wiphy);
}
void cfg80211_destroy_ifaces(struct cfg80211_registered_device *rdev)
{
struct wireless_dev *wdev, *tmp;
bool found = false;
ASSERT_RTNL();
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
if (wdev->nl_owner_dead) {
if (wdev->netdev)
dev_close(wdev->netdev);
found = true;
}
}
if (!found)
return;
wiphy_lock(&rdev->wiphy);
list_for_each_entry_safe(wdev, tmp, &rdev->wiphy.wdev_list, list) {
if (wdev->nl_owner_dead) {
cfg80211_leave(rdev, wdev);
rdev_del_virtual_intf(rdev, wdev);
}
}
wiphy_unlock(&rdev->wiphy);
}
static void cfg80211_destroy_iface_wk(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
rdev = container_of(work, struct cfg80211_registered_device,
destroy_work);
rtnl_lock();
cfg80211_destroy_ifaces(rdev);
rtnl_unlock();
}
static void cfg80211_sched_scan_stop_wk(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
struct cfg80211_sched_scan_request *req, *tmp;
rdev = container_of(work, struct cfg80211_registered_device,
sched_scan_stop_wk);
rtnl_lock();
list_for_each_entry_safe(req, tmp, &rdev->sched_scan_req_list, list) {
if (req->nl_owner_dead)
cfg80211_stop_sched_scan_req(rdev, req, false);
}
rtnl_unlock();
}
static void cfg80211_propagate_radar_detect_wk(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
rdev = container_of(work, struct cfg80211_registered_device,
propagate_radar_detect_wk);
rtnl_lock();
regulatory_propagate_dfs_state(&rdev->wiphy, &rdev->radar_chandef,
NL80211_DFS_UNAVAILABLE,
NL80211_RADAR_DETECTED);
rtnl_unlock();
}
static void cfg80211_propagate_cac_done_wk(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
rdev = container_of(work, struct cfg80211_registered_device,
propagate_cac_done_wk);
rtnl_lock();
regulatory_propagate_dfs_state(&rdev->wiphy, &rdev->cac_done_chandef,
NL80211_DFS_AVAILABLE,
NL80211_RADAR_CAC_FINISHED);
rtnl_unlock();
}
/* exported functions */
struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv,
const char *requested_name)
{
static atomic_t wiphy_counter = ATOMIC_INIT(0);
struct cfg80211_registered_device *rdev;
int alloc_size;
WARN_ON(ops->add_key && (!ops->del_key || !ops->set_default_key));
WARN_ON(ops->auth && (!ops->assoc || !ops->deauth || !ops->disassoc));
WARN_ON(ops->connect && !ops->disconnect);
WARN_ON(ops->join_ibss && !ops->leave_ibss);
WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf);
WARN_ON(ops->add_station && !ops->del_station);
WARN_ON(ops->add_mpath && !ops->del_mpath);
WARN_ON(ops->join_mesh && !ops->leave_mesh);
WARN_ON(ops->start_p2p_device && !ops->stop_p2p_device);
WARN_ON(ops->start_ap && !ops->stop_ap);
WARN_ON(ops->join_ocb && !ops->leave_ocb);
WARN_ON(ops->suspend && !ops->resume);
WARN_ON(ops->sched_scan_start && !ops->sched_scan_stop);
WARN_ON(ops->remain_on_channel && !ops->cancel_remain_on_channel);
WARN_ON(ops->tdls_channel_switch && !ops->tdls_cancel_channel_switch);
WARN_ON(ops->add_tx_ts && !ops->del_tx_ts);
alloc_size = sizeof(*rdev) + sizeof_priv;
rdev = kzalloc(alloc_size, GFP_KERNEL);
if (!rdev)
return NULL;
rdev->ops = ops;
rdev->wiphy_idx = atomic_inc_return(&wiphy_counter);
if (unlikely(rdev->wiphy_idx < 0)) {
/* ugh, wrapped! */
atomic_dec(&wiphy_counter);
kfree(rdev);
return NULL;
}
/* atomic_inc_return makes it start at 1, make it start at 0 */
rdev->wiphy_idx--;
/* give it a proper name */
if (requested_name && requested_name[0]) {
int rv;
rtnl_lock();
rv = cfg80211_dev_check_name(rdev, requested_name);
if (rv < 0) {
rtnl_unlock();
goto use_default_name;
}
rv = dev_set_name(&rdev->wiphy.dev, "%s", requested_name);
rtnl_unlock();
if (rv)
goto use_default_name;
} else {
int rv;
use_default_name:
/* NOTE: This is *probably* safe w/out holding rtnl because of
* the restrictions on phy names. Probably this call could
* fail if some other part of the kernel (re)named a device
* phyX. But, might should add some locking and check return
* value, and use a different name if this one exists?
*/
rv = dev_set_name(&rdev->wiphy.dev, PHY_NAME "%d", rdev->wiphy_idx);
if (rv < 0) {
kfree(rdev);
return NULL;
}
}
mutex_init(&rdev->wiphy.mtx);
INIT_LIST_HEAD(&rdev->wiphy.wdev_list);
INIT_LIST_HEAD(&rdev->beacon_registrations);
spin_lock_init(&rdev->beacon_registrations_lock);
spin_lock_init(&rdev->bss_lock);
INIT_LIST_HEAD(&rdev->bss_list);
INIT_LIST_HEAD(&rdev->sched_scan_req_list);
INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
INIT_DELAYED_WORK(&rdev->dfs_update_channels_wk,
cfg80211_dfs_channels_update_work);
#ifdef CONFIG_CFG80211_WEXT
rdev->wiphy.wext = &cfg80211_wext_handler;
#endif
device_initialize(&rdev->wiphy.dev);
rdev->wiphy.dev.class = &ieee80211_class;
rdev->wiphy.dev.platform_data = rdev;
device_enable_async_suspend(&rdev->wiphy.dev);
INIT_WORK(&rdev->destroy_work, cfg80211_destroy_iface_wk);
INIT_WORK(&rdev->sched_scan_stop_wk, cfg80211_sched_scan_stop_wk);
INIT_WORK(&rdev->sched_scan_res_wk, cfg80211_sched_scan_results_wk);
INIT_WORK(&rdev->propagate_radar_detect_wk,
cfg80211_propagate_radar_detect_wk);
INIT_WORK(&rdev->propagate_cac_done_wk, cfg80211_propagate_cac_done_wk);
INIT_WORK(&rdev->mgmt_registrations_update_wk,
cfg80211_mgmt_registrations_update_wk);
#ifdef CONFIG_CFG80211_DEFAULT_PS
rdev->wiphy.flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
#endif
wiphy_net_set(&rdev->wiphy, &init_net);
rdev->rfkill_ops.set_block = cfg80211_rfkill_set_block;
rdev->rfkill = rfkill_alloc(dev_name(&rdev->wiphy.dev),
&rdev->wiphy.dev, RFKILL_TYPE_WLAN,
&rdev->rfkill_ops, rdev);
if (!rdev->rfkill) {
wiphy_free(&rdev->wiphy);
return NULL;
}
INIT_WORK(&rdev->rfkill_block, cfg80211_rfkill_block_work);
INIT_WORK(&rdev->conn_work, cfg80211_conn_work);
INIT_WORK(&rdev->event_work, cfg80211_event_work);
init_waitqueue_head(&rdev->dev_wait);
/*
* Initialize wiphy parameters to IEEE 802.11 MIB default values.
* Fragmentation and RTS threshold are disabled by default with the
* special -1 value.
*/
rdev->wiphy.retry_short = 7;
rdev->wiphy.retry_long = 4;
rdev->wiphy.frag_threshold = (u32) -1;
rdev->wiphy.rts_threshold = (u32) -1;
rdev->wiphy.coverage_class = 0;
rdev->wiphy.max_num_csa_counters = 1;
rdev->wiphy.max_sched_scan_plans = 1;
rdev->wiphy.max_sched_scan_plan_interval = U32_MAX;
return &rdev->wiphy;
}
EXPORT_SYMBOL(wiphy_new_nm);
static int wiphy_verify_combinations(struct wiphy *wiphy)
{
const struct ieee80211_iface_combination *c;
int i, j;
for (i = 0; i < wiphy->n_iface_combinations; i++) {
u32 cnt = 0;
u16 all_iftypes = 0;
c = &wiphy->iface_combinations[i];
/*
* Combinations with just one interface aren't real,
* however we make an exception for DFS.
*/
if (WARN_ON((c->max_interfaces < 2) && !c->radar_detect_widths))
return -EINVAL;
/* Need at least one channel */
if (WARN_ON(!c->num_different_channels))
return -EINVAL;
/*
* Put a sane limit on maximum number of different
* channels to simplify channel accounting code.
*/
if (WARN_ON(c->num_different_channels >
CFG80211_MAX_NUM_DIFFERENT_CHANNELS))
return -EINVAL;
/* DFS only works on one channel. */
if (WARN_ON(c->radar_detect_widths &&
(c->num_different_channels > 1)))
return -EINVAL;
if (WARN_ON(!c->n_limits))
return -EINVAL;
for (j = 0; j < c->n_limits; j++) {
u16 types = c->limits[j].types;
/* interface types shouldn't overlap */
if (WARN_ON(types & all_iftypes))
return -EINVAL;
all_iftypes |= types;
if (WARN_ON(!c->limits[j].max))
return -EINVAL;
/* Shouldn't list software iftypes in combinations! */
if (WARN_ON(wiphy->software_iftypes & types))
return -EINVAL;
/* Only a single P2P_DEVICE can be allowed */
if (WARN_ON(types & BIT(NL80211_IFTYPE_P2P_DEVICE) &&
c->limits[j].max > 1))
return -EINVAL;
/* Only a single NAN can be allowed */
if (WARN_ON(types & BIT(NL80211_IFTYPE_NAN) &&
c->limits[j].max > 1))
return -EINVAL;
/*
* This isn't well-defined right now. If you have an
* IBSS interface, then its beacon interval may change
* by joining other networks, and nothing prevents it
* from doing that.
* So technically we probably shouldn't even allow AP
* and IBSS in the same interface, but it seems that
* some drivers support that, possibly only with fixed
* beacon intervals for IBSS.
*/
if (WARN_ON(types & BIT(NL80211_IFTYPE_ADHOC) &&
c->beacon_int_min_gcd)) {
return -EINVAL;
}
cnt += c->limits[j].max;
/*
* Don't advertise an unsupported type
* in a combination.
*/
if (WARN_ON((wiphy->interface_modes & types) != types))
return -EINVAL;
}
if (WARN_ON(all_iftypes & BIT(NL80211_IFTYPE_WDS)))
return -EINVAL;
/* You can't even choose that many! */
if (WARN_ON(cnt < c->max_interfaces))
return -EINVAL;
}
return 0;
}
int wiphy_register(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
int res;
enum nl80211_band band;
struct ieee80211_supported_band *sband;
bool have_band = false;
int i;
u16 ifmodes = wiphy->interface_modes;
#ifdef CONFIG_PM
if (WARN_ON(wiphy->wowlan &&
(wiphy->wowlan->flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
!(wiphy->wowlan->flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY)))
return -EINVAL;
if (WARN_ON(wiphy->wowlan &&
!wiphy->wowlan->flags && !wiphy->wowlan->n_patterns &&
!wiphy->wowlan->tcp))
return -EINVAL;
#endif
if (WARN_ON((wiphy->features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH) &&
(!rdev->ops->tdls_channel_switch ||
!rdev->ops->tdls_cancel_channel_switch)))
return -EINVAL;
if (WARN_ON((wiphy->interface_modes & BIT(NL80211_IFTYPE_NAN)) &&
(!rdev->ops->start_nan || !rdev->ops->stop_nan ||
!rdev->ops->add_nan_func || !rdev->ops->del_nan_func ||
!(wiphy->nan_supported_bands & BIT(NL80211_BAND_2GHZ)))))
return -EINVAL;
if (WARN_ON(wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS)))
return -EINVAL;
if (WARN_ON(wiphy->pmsr_capa && !wiphy->pmsr_capa->ftm.supported))
return -EINVAL;
if (wiphy->pmsr_capa && wiphy->pmsr_capa->ftm.supported) {
if (WARN_ON(!wiphy->pmsr_capa->ftm.asap &&
!wiphy->pmsr_capa->ftm.non_asap))
return -EINVAL;
if (WARN_ON(!wiphy->pmsr_capa->ftm.preambles ||
!wiphy->pmsr_capa->ftm.bandwidths))
return -EINVAL;
if (WARN_ON(wiphy->pmsr_capa->ftm.preambles &
~(BIT(NL80211_PREAMBLE_LEGACY) |
BIT(NL80211_PREAMBLE_HT) |
BIT(NL80211_PREAMBLE_VHT) |
BIT(NL80211_PREAMBLE_HE) |
BIT(NL80211_PREAMBLE_DMG))))
return -EINVAL;
if (WARN_ON((wiphy->pmsr_capa->ftm.trigger_based ||
wiphy->pmsr_capa->ftm.non_trigger_based) &&
!(wiphy->pmsr_capa->ftm.preambles &
BIT(NL80211_PREAMBLE_HE))))
return -EINVAL;
if (WARN_ON(wiphy->pmsr_capa->ftm.bandwidths &
~(BIT(NL80211_CHAN_WIDTH_20_NOHT) |
BIT(NL80211_CHAN_WIDTH_20) |
BIT(NL80211_CHAN_WIDTH_40) |
BIT(NL80211_CHAN_WIDTH_80) |
BIT(NL80211_CHAN_WIDTH_80P80) |
BIT(NL80211_CHAN_WIDTH_160) |
BIT(NL80211_CHAN_WIDTH_5) |
BIT(NL80211_CHAN_WIDTH_10))))
return -EINVAL;
}
/*
* if a wiphy has unsupported modes for regulatory channel enforcement,
* opt-out of enforcement checking
*/
if (wiphy->interface_modes & ~(BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_P2P_DEVICE) |
BIT(NL80211_IFTYPE_NAN) |
BIT(NL80211_IFTYPE_AP_VLAN) |
BIT(NL80211_IFTYPE_MONITOR)))
wiphy->regulatory_flags |= REGULATORY_IGNORE_STALE_KICKOFF;
if (WARN_ON((wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) &&
(wiphy->regulatory_flags &
(REGULATORY_CUSTOM_REG |
REGULATORY_STRICT_REG |
REGULATORY_COUNTRY_IE_FOLLOW_POWER |
REGULATORY_COUNTRY_IE_IGNORE))))
return -EINVAL;
if (WARN_ON(wiphy->coalesce &&
(!wiphy->coalesce->n_rules ||
!wiphy->coalesce->n_patterns) &&
(!wiphy->coalesce->pattern_min_len ||
wiphy->coalesce->pattern_min_len >
wiphy->coalesce->pattern_max_len)))
return -EINVAL;
if (WARN_ON(wiphy->ap_sme_capa &&
!(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME)))
return -EINVAL;
if (WARN_ON(wiphy->addresses && !wiphy->n_addresses))
return -EINVAL;
if (WARN_ON(wiphy->addresses &&
!is_zero_ether_addr(wiphy->perm_addr) &&
memcmp(wiphy->perm_addr, wiphy->addresses[0].addr,
ETH_ALEN)))
return -EINVAL;
if (WARN_ON(wiphy->max_acl_mac_addrs &&
(!(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME) ||
!rdev->ops->set_mac_acl)))
return -EINVAL;
/* assure only valid behaviours are flagged by driver
* hence subtract 2 as bit 0 is invalid.
*/
if (WARN_ON(wiphy->bss_select_support &&
(wiphy->bss_select_support & ~(BIT(__NL80211_BSS_SELECT_ATTR_AFTER_LAST) - 2))))
return -EINVAL;
if (WARN_ON(wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X) &&
(!rdev->ops->set_pmk || !rdev->ops->del_pmk)))
return -EINVAL;
if (WARN_ON(!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_FW_ROAM) &&
rdev->ops->update_connect_params))
return -EINVAL;
if (wiphy->addresses)
memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN);
/* sanity check ifmodes */
WARN_ON(!ifmodes);
ifmodes &= ((1 << NUM_NL80211_IFTYPES) - 1) & ~1;
if (WARN_ON(ifmodes != wiphy->interface_modes))
wiphy->interface_modes = ifmodes;
res = wiphy_verify_combinations(wiphy);
if (res)
return res;
/* sanity check supported bands/channels */
for (band = 0; band < NUM_NL80211_BANDS; band++) {
u16 types = 0;
bool have_he = false;
sband = wiphy->bands[band];
if (!sband)
continue;
sband->band = band;
if (WARN_ON(!sband->n_channels))
return -EINVAL;
/*
* on 60GHz or sub-1Ghz band, there are no legacy rates, so
* n_bitrates is 0
*/
if (WARN_ON((band != NL80211_BAND_60GHZ &&
band != NL80211_BAND_S1GHZ) &&
!sband->n_bitrates))
return -EINVAL;
if (WARN_ON(band == NL80211_BAND_6GHZ &&
(sband->ht_cap.ht_supported ||
sband->vht_cap.vht_supported)))
return -EINVAL;
/*
* Since cfg80211_disable_40mhz_24ghz is global, we can
* modify the sband's ht data even if the driver uses a
* global structure for that.
*/
if (cfg80211_disable_40mhz_24ghz &&
band == NL80211_BAND_2GHZ &&
sband->ht_cap.ht_supported) {
sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
}
/*
* Since we use a u32 for rate bitmaps in
* ieee80211_get_response_rate, we cannot
* have more than 32 legacy rates.
*/
if (WARN_ON(sband->n_bitrates > 32))
return -EINVAL;
for (i = 0; i < sband->n_channels; i++) {
sband->channels[i].orig_flags =
sband->channels[i].flags;
sband->channels[i].orig_mag = INT_MAX;
sband->channels[i].orig_mpwr =
sband->channels[i].max_power;
sband->channels[i].band = band;
if (WARN_ON(sband->channels[i].freq_offset >= 1000))
return -EINVAL;
}
for (i = 0; i < sband->n_iftype_data; i++) {
const struct ieee80211_sband_iftype_data *iftd;
iftd = &sband->iftype_data[i];
if (WARN_ON(!iftd->types_mask))
return -EINVAL;
if (WARN_ON(types & iftd->types_mask))
return -EINVAL;
/* at least one piece of information must be present */
if (WARN_ON(!iftd->he_cap.has_he))
return -EINVAL;
types |= iftd->types_mask;
if (i == 0)
have_he = iftd->he_cap.has_he;
else
have_he = have_he &&
iftd->he_cap.has_he;
}
if (WARN_ON(!have_he && band == NL80211_BAND_6GHZ))
return -EINVAL;
have_band = true;
}
if (!have_band) {
WARN_ON(1);
return -EINVAL;
}
for (i = 0; i < rdev->wiphy.n_vendor_commands; i++) {
/*
* Validate we have a policy (can be explicitly set to
* VENDOR_CMD_RAW_DATA which is non-NULL) and also that
* we have at least one of doit/dumpit.
*/
if (WARN_ON(!rdev->wiphy.vendor_commands[i].policy))
return -EINVAL;
if (WARN_ON(!rdev->wiphy.vendor_commands[i].doit &&
!rdev->wiphy.vendor_commands[i].dumpit))
return -EINVAL;
}
#ifdef CONFIG_PM
if (WARN_ON(rdev->wiphy.wowlan && rdev->wiphy.wowlan->n_patterns &&
(!rdev->wiphy.wowlan->pattern_min_len ||
rdev->wiphy.wowlan->pattern_min_len >
rdev->wiphy.wowlan->pattern_max_len)))
return -EINVAL;
#endif
/* check and set up bitrates */
ieee80211_set_bitrate_flags(wiphy);
rdev->wiphy.features |= NL80211_FEATURE_SCAN_FLUSH;
rtnl_lock();
res = device_add(&rdev->wiphy.dev);
if (res) {
rtnl_unlock();
return res;
}
/* set up regulatory info */
wiphy_regulatory_register(wiphy);
list_add_rcu(&rdev->list, &cfg80211_rdev_list);
cfg80211_rdev_list_generation++;
/* add to debugfs */
rdev->wiphy.debugfsdir = debugfs_create_dir(wiphy_name(&rdev->wiphy),
ieee80211_debugfs_dir);
cfg80211_debugfs_rdev_add(rdev);
nl80211_notify_wiphy(rdev, NL80211_CMD_NEW_WIPHY);
if (wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) {
struct regulatory_request request;
request.wiphy_idx = get_wiphy_idx(wiphy);
request.initiator = NL80211_REGDOM_SET_BY_DRIVER;
request.alpha2[0] = '9';
request.alpha2[1] = '9';
nl80211_send_reg_change_event(&request);
}
/* Check that nobody globally advertises any capabilities they do not
* advertise on all possible interface types.
*/
if (wiphy->extended_capabilities_len &&
wiphy->num_iftype_ext_capab &&
wiphy->iftype_ext_capab) {
u8 supported_on_all, j;
const struct wiphy_iftype_ext_capab *capab;
capab = wiphy->iftype_ext_capab;
for (j = 0; j < wiphy->extended_capabilities_len; j++) {
if (capab[0].extended_capabilities_len > j)
supported_on_all =
capab[0].extended_capabilities[j];
else
supported_on_all = 0x00;
for (i = 1; i < wiphy->num_iftype_ext_capab; i++) {
if (j >= capab[i].extended_capabilities_len) {
supported_on_all = 0x00;
break;
}
supported_on_all &=
capab[i].extended_capabilities[j];
}
if (WARN_ON(wiphy->extended_capabilities[j] &
~supported_on_all))
break;
}
}
rdev->wiphy.registered = true;
rtnl_unlock();
res = rfkill_register(rdev->rfkill);
if (res) {
rfkill_destroy(rdev->rfkill);
rdev->rfkill = NULL;
wiphy_unregister(&rdev->wiphy);
return res;
}
return 0;
}
EXPORT_SYMBOL(wiphy_register);
void wiphy_rfkill_start_polling(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
if (!rdev->ops->rfkill_poll)
return;
rdev->rfkill_ops.poll = cfg80211_rfkill_poll;
rfkill_resume_polling(rdev->rfkill);
}
EXPORT_SYMBOL(wiphy_rfkill_start_polling);
void wiphy_rfkill_stop_polling(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
rfkill_pause_polling(rdev->rfkill);
}
EXPORT_SYMBOL(wiphy_rfkill_stop_polling);
void wiphy_unregister(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
wait_event(rdev->dev_wait, ({
int __count;
wiphy_lock(&rdev->wiphy);
__count = rdev->opencount;
wiphy_unlock(&rdev->wiphy);
__count == 0; }));
if (rdev->rfkill)
rfkill_unregister(rdev->rfkill);
rtnl_lock();
wiphy_lock(&rdev->wiphy);
nl80211_notify_wiphy(rdev, NL80211_CMD_DEL_WIPHY);
rdev->wiphy.registered = false;
WARN_ON(!list_empty(&rdev->wiphy.wdev_list));
/*
* First remove the hardware from everywhere, this makes
* it impossible to find from userspace.
*/
debugfs_remove_recursive(rdev->wiphy.debugfsdir);
list_del_rcu(&rdev->list);
synchronize_rcu();
/*
* If this device got a regulatory hint tell core its
* free to listen now to a new shiny device regulatory hint
*/
wiphy_regulatory_deregister(wiphy);
cfg80211_rdev_list_generation++;
device_del(&rdev->wiphy.dev);
wiphy_unlock(&rdev->wiphy);
rtnl_unlock();
flush_work(&rdev->scan_done_wk);
cancel_work_sync(&rdev->conn_work);
flush_work(&rdev->event_work);
cancel_delayed_work_sync(&rdev->dfs_update_channels_wk);
flush_work(&rdev->destroy_work);
flush_work(&rdev->sched_scan_stop_wk);
flush_work(&rdev->propagate_radar_detect_wk);
flush_work(&rdev->propagate_cac_done_wk);
flush_work(&rdev->mgmt_registrations_update_wk);
#ifdef CONFIG_PM
if (rdev->wiphy.wowlan_config && rdev->ops->set_wakeup)
rdev_set_wakeup(rdev, false);
#endif
cfg80211_rdev_free_wowlan(rdev);
cfg80211_rdev_free_coalesce(rdev);
}
EXPORT_SYMBOL(wiphy_unregister);
void cfg80211_dev_free(struct cfg80211_registered_device *rdev)
{
struct cfg80211_internal_bss *scan, *tmp;
struct cfg80211_beacon_registration *reg, *treg;
rfkill_destroy(rdev->rfkill);
list_for_each_entry_safe(reg, treg, &rdev->beacon_registrations, list) {
list_del(&reg->list);
kfree(reg);
}
list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list)
cfg80211_put_bss(&rdev->wiphy, &scan->pub);
mutex_destroy(&rdev->wiphy.mtx);
kfree(rdev);
}
void wiphy_free(struct wiphy *wiphy)
{
put_device(&wiphy->dev);
}
EXPORT_SYMBOL(wiphy_free);
void wiphy_rfkill_set_hw_state_reason(struct wiphy *wiphy, bool blocked,
enum rfkill_hard_block_reasons reason)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
if (rfkill_set_hw_state_reason(rdev->rfkill, blocked, reason))
schedule_work(&rdev->rfkill_block);
}
EXPORT_SYMBOL(wiphy_rfkill_set_hw_state_reason);
void cfg80211_cqm_config_free(struct wireless_dev *wdev)
{
kfree(wdev->cqm_config);
wdev->cqm_config = NULL;
}
static void _cfg80211_unregister_wdev(struct wireless_dev *wdev,
bool unregister_netdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
ASSERT_RTNL();
lockdep_assert_held(&rdev->wiphy.mtx);
flush_work(&wdev->pmsr_free_wk);
nl80211_notify_iface(rdev, wdev, NL80211_CMD_DEL_INTERFACE);
wdev->registered = false;
if (wdev->netdev) {
sysfs_remove_link(&wdev->netdev->dev.kobj, "phy80211");
if (unregister_netdev)
unregister_netdevice(wdev->netdev);
}
list_del_rcu(&wdev->list);
synchronize_net();
rdev->devlist_generation++;
cfg80211_mlme_purge_registrations(wdev);
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
cfg80211_stop_p2p_device(rdev, wdev);
break;
case NL80211_IFTYPE_NAN:
cfg80211_stop_nan(rdev, wdev);
break;
default:
break;
}
#ifdef CONFIG_CFG80211_WEXT
kfree_sensitive(wdev->wext.keys);
wdev->wext.keys = NULL;
#endif
/* only initialized if we have a netdev */
if (wdev->netdev)
flush_work(&wdev->disconnect_wk);
cfg80211_cqm_config_free(wdev);
/*
* Ensure that all events have been processed and
* freed.
*/
cfg80211_process_wdev_events(wdev);
if (WARN_ON(wdev->current_bss)) {
cfg80211_unhold_bss(wdev->current_bss);
cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub);
wdev->current_bss = NULL;
}
}
void cfg80211_unregister_wdev(struct wireless_dev *wdev)
{
_cfg80211_unregister_wdev(wdev, true);
}
EXPORT_SYMBOL(cfg80211_unregister_wdev);
static const struct device_type wiphy_type = {
.name = "wlan",
};
void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
enum nl80211_iftype iftype, int num)
{
lockdep_assert_held(&rdev->wiphy.mtx);
rdev->num_running_ifaces += num;
if (iftype == NL80211_IFTYPE_MONITOR)
rdev->num_running_monitor_ifaces += num;
}
void __cfg80211_leave(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
{
struct net_device *dev = wdev->netdev;
struct cfg80211_sched_scan_request *pos, *tmp;
lockdep_assert_held(&rdev->wiphy.mtx);
ASSERT_WDEV_LOCK(wdev);
cfg80211_pmsr_wdev_down(wdev);
switch (wdev->iftype) {
case NL80211_IFTYPE_ADHOC:
__cfg80211_leave_ibss(rdev, dev, true);
break;
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_STATION:
list_for_each_entry_safe(pos, tmp, &rdev->sched_scan_req_list,
list) {
if (dev == pos->dev)
cfg80211_stop_sched_scan_req(rdev, pos, false);
}
#ifdef CONFIG_CFG80211_WEXT
kfree(wdev->wext.ie);
wdev->wext.ie = NULL;
wdev->wext.ie_len = 0;
wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
#endif
cfg80211_disconnect(rdev, dev,
WLAN_REASON_DEAUTH_LEAVING, true);
break;
case NL80211_IFTYPE_MESH_POINT:
__cfg80211_leave_mesh(rdev, dev);
break;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
__cfg80211_stop_ap(rdev, dev, true);
break;
case NL80211_IFTYPE_OCB:
__cfg80211_leave_ocb(rdev, dev);
break;
case NL80211_IFTYPE_P2P_DEVICE:
case NL80211_IFTYPE_NAN:
/* cannot happen, has no netdev */
break;
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MONITOR:
/* nothing to do */
break;
case NL80211_IFTYPE_UNSPECIFIED:
case NL80211_IFTYPE_WDS:
case NUM_NL80211_IFTYPES:
/* invalid */
break;
}
}
void cfg80211_leave(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
{
wdev_lock(wdev);
__cfg80211_leave(rdev, wdev);
wdev_unlock(wdev);
}
void cfg80211_stop_iface(struct wiphy *wiphy, struct wireless_dev *wdev,
gfp_t gfp)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct cfg80211_event *ev;
unsigned long flags;
trace_cfg80211_stop_iface(wiphy, wdev);
ev = kzalloc(sizeof(*ev), gfp);
if (!ev)
return;
ev->type = EVENT_STOPPED;
spin_lock_irqsave(&wdev->event_lock, flags);
list_add_tail(&ev->list, &wdev->event_list);
spin_unlock_irqrestore(&wdev->event_lock, flags);
queue_work(cfg80211_wq, &rdev->event_work);
}
EXPORT_SYMBOL(cfg80211_stop_iface);
void cfg80211_init_wdev(struct wireless_dev *wdev)
{
mutex_init(&wdev->mtx);
INIT_LIST_HEAD(&wdev->event_list);
spin_lock_init(&wdev->event_lock);
INIT_LIST_HEAD(&wdev->mgmt_registrations);
spin_lock_init(&wdev->mgmt_registrations_lock);
INIT_LIST_HEAD(&wdev->pmsr_list);
spin_lock_init(&wdev->pmsr_lock);
INIT_WORK(&wdev->pmsr_free_wk, cfg80211_pmsr_free_wk);
#ifdef CONFIG_CFG80211_WEXT
wdev->wext.default_key = -1;
wdev->wext.default_mgmt_key = -1;
wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
#endif
if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT)
wdev->ps = true;
else
wdev->ps = false;
/* allow mac80211 to determine the timeout */
wdev->ps_timeout = -1;
if ((wdev->iftype == NL80211_IFTYPE_STATION ||
wdev->iftype == NL80211_IFTYPE_P2P_CLIENT ||
wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr)
wdev->netdev->priv_flags |= IFF_DONT_BRIDGE;
INIT_WORK(&wdev->disconnect_wk, cfg80211_autodisconnect_wk);
}
void cfg80211_register_wdev(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
{
ASSERT_RTNL();
lockdep_assert_held(&rdev->wiphy.mtx);
/*
* We get here also when the interface changes network namespaces,
* as it's registered into the new one, but we don't want it to
* change ID in that case. Checking if the ID is already assigned
* works, because 0 isn't considered a valid ID and the memory is
* 0-initialized.
*/
if (!wdev->identifier)
wdev->identifier = ++rdev->wdev_id;
list_add_rcu(&wdev->list, &rdev->wiphy.wdev_list);
rdev->devlist_generation++;
wdev->registered = true;
nl80211_notify_iface(rdev, wdev, NL80211_CMD_NEW_INTERFACE);
}
int cfg80211_register_netdevice(struct net_device *dev)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev;
int ret;
ASSERT_RTNL();
if (WARN_ON(!wdev))
return -EINVAL;
rdev = wiphy_to_rdev(wdev->wiphy);
lockdep_assert_held(&rdev->wiphy.mtx);
/* we'll take care of this */
wdev->registered = true;
wdev->registering = true;
ret = register_netdevice(dev);
if (ret)
goto out;
if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj,
"phy80211")) {
pr_err("failed to add phy80211 symlink to netdev!\n");
unregister_netdevice(dev);
ret = -EINVAL;
goto out;
}
cfg80211_register_wdev(rdev, wdev);
ret = 0;
out:
wdev->registering = false;
if (ret)
wdev->registered = false;
return ret;
}
EXPORT_SYMBOL(cfg80211_register_netdevice);
static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
unsigned long state, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev;
struct cfg80211_sched_scan_request *pos, *tmp;
if (!wdev)
return NOTIFY_DONE;
rdev = wiphy_to_rdev(wdev->wiphy);
WARN_ON(wdev->iftype == NL80211_IFTYPE_UNSPECIFIED);
switch (state) {
case NETDEV_POST_INIT:
SET_NETDEV_DEVTYPE(dev, &wiphy_type);
wdev->netdev = dev;
/* can only change netns with wiphy */
dev->features |= NETIF_F_NETNS_LOCAL;
cfg80211_init_wdev(wdev);
break;
case NETDEV_REGISTER:
if (!wdev->registered) {
wiphy_lock(&rdev->wiphy);
cfg80211_register_wdev(rdev, wdev);
wiphy_unlock(&rdev->wiphy);
}
break;
case NETDEV_UNREGISTER:
/*
* It is possible to get NETDEV_UNREGISTER multiple times,
* so check wdev->registered.
*/
if (wdev->registered && !wdev->registering) {
wiphy_lock(&rdev->wiphy);
_cfg80211_unregister_wdev(wdev, false);
wiphy_unlock(&rdev->wiphy);
}
break;
case NETDEV_GOING_DOWN:
wiphy_lock(&rdev->wiphy);
cfg80211_leave(rdev, wdev);
wiphy_unlock(&rdev->wiphy);
break;
case NETDEV_DOWN:
wiphy_lock(&rdev->wiphy);
cfg80211_update_iface_num(rdev, wdev->iftype, -1);
if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
if (WARN_ON(!rdev->scan_req->notified &&
(!rdev->int_scan_req ||
!rdev->int_scan_req->notified)))
rdev->scan_req->info.aborted = true;
___cfg80211_scan_done(rdev, false);
}
list_for_each_entry_safe(pos, tmp,
&rdev->sched_scan_req_list, list) {
if (WARN_ON(pos->dev == wdev->netdev))
cfg80211_stop_sched_scan_req(rdev, pos, false);
}
rdev->opencount--;
wiphy_unlock(&rdev->wiphy);
wake_up(&rdev->dev_wait);
break;
case NETDEV_UP:
wiphy_lock(&rdev->wiphy);
cfg80211_update_iface_num(rdev, wdev->iftype, 1);
wdev_lock(wdev);
switch (wdev->iftype) {
#ifdef CONFIG_CFG80211_WEXT
case NL80211_IFTYPE_ADHOC:
cfg80211_ibss_wext_join(rdev, wdev);
break;
case NL80211_IFTYPE_STATION:
cfg80211_mgd_wext_connect(rdev, wdev);
break;
#endif
#ifdef CONFIG_MAC80211_MESH
case NL80211_IFTYPE_MESH_POINT:
{
/* backward compat code... */
struct mesh_setup setup;
memcpy(&setup, &default_mesh_setup,
sizeof(setup));
/* back compat only needed for mesh_id */
setup.mesh_id = wdev->ssid;
setup.mesh_id_len = wdev->mesh_id_up_len;
if (wdev->mesh_id_up_len)
__cfg80211_join_mesh(rdev, dev,
&setup,
&default_mesh_config);
break;
}
#endif
default:
break;
}
wdev_unlock(wdev);
rdev->opencount++;
/*
* Configure power management to the driver here so that its
* correctly set also after interface type changes etc.
*/
if ((wdev->iftype == NL80211_IFTYPE_STATION ||
wdev->iftype == NL80211_IFTYPE_P2P_CLIENT) &&
rdev->ops->set_power_mgmt &&
rdev_set_power_mgmt(rdev, dev, wdev->ps,
wdev->ps_timeout)) {
/* assume this means it's off */
wdev->ps = false;
}
wiphy_unlock(&rdev->wiphy);
break;
case NETDEV_PRE_UP:
if (!cfg80211_iftype_allowed(wdev->wiphy, wdev->iftype,
wdev->use_4addr, 0))
return notifier_from_errno(-EOPNOTSUPP);
if (rfkill_blocked(rdev->rfkill))
return notifier_from_errno(-ERFKILL);
break;
default:
return NOTIFY_DONE;
}
wireless_nlevent_flush();
return NOTIFY_OK;
}
static struct notifier_block cfg80211_netdev_notifier = {
.notifier_call = cfg80211_netdev_notifier_call,
};
static void __net_exit cfg80211_pernet_exit(struct net *net)
{
struct cfg80211_registered_device *rdev;
rtnl_lock();
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
if (net_eq(wiphy_net(&rdev->wiphy), net))
WARN_ON(cfg80211_switch_netns(rdev, &init_net));
}
rtnl_unlock();
}
static struct pernet_operations cfg80211_pernet_ops = {
.exit = cfg80211_pernet_exit,
};
static int __init cfg80211_init(void)
{
int err;
err = register_pernet_device(&cfg80211_pernet_ops);
if (err)
goto out_fail_pernet;
err = wiphy_sysfs_init();
if (err)
goto out_fail_sysfs;
err = register_netdevice_notifier(&cfg80211_netdev_notifier);
if (err)
goto out_fail_notifier;
err = nl80211_init();
if (err)
goto out_fail_nl80211;
ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL);
err = regulatory_init();
if (err)
goto out_fail_reg;
cfg80211_wq = alloc_ordered_workqueue("cfg80211", WQ_MEM_RECLAIM);
if (!cfg80211_wq) {
err = -ENOMEM;
goto out_fail_wq;
}
return 0;
out_fail_wq:
regulatory_exit();
out_fail_reg:
debugfs_remove(ieee80211_debugfs_dir);
nl80211_exit();
out_fail_nl80211:
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
out_fail_notifier:
wiphy_sysfs_exit();
out_fail_sysfs:
unregister_pernet_device(&cfg80211_pernet_ops);
out_fail_pernet:
return err;
}
fs_initcall(cfg80211_init);
static void __exit cfg80211_exit(void)
{
debugfs_remove(ieee80211_debugfs_dir);
nl80211_exit();
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
wiphy_sysfs_exit();
regulatory_exit();
unregister_pernet_device(&cfg80211_pernet_ops);
destroy_workqueue(cfg80211_wq);
}
module_exit(cfg80211_exit);