forked from Minki/linux
fce65f6515
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
370 lines
8.0 KiB
C
370 lines
8.0 KiB
C
/*
|
|
* Driver for the po1030 sensor
|
|
*
|
|
* Copyright (c) 2008 Erik Andrén
|
|
* Copyright (c) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project.
|
|
* Copyright (c) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br>
|
|
*
|
|
* Portions of code to USB interface and ALi driver software,
|
|
* Copyright (c) 2006 Willem Duinker
|
|
* v4l2 interface modeled after the V4L2 driver
|
|
* for SN9C10x PC Camera Controllers
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation, version 2.
|
|
*
|
|
*/
|
|
|
|
#include "m5602_po1030.h"
|
|
|
|
static void po1030_dump_registers(struct sd *sd);
|
|
|
|
int po1030_probe(struct sd *sd)
|
|
{
|
|
u8 prod_id = 0, ver_id = 0, i;
|
|
|
|
if (force_sensor) {
|
|
if (force_sensor == PO1030_SENSOR) {
|
|
info("Forcing a %s sensor", po1030.name);
|
|
goto sensor_found;
|
|
}
|
|
/* If we want to force another sensor, don't try to probe this
|
|
* one */
|
|
return -ENODEV;
|
|
}
|
|
|
|
info("Probing for a po1030 sensor");
|
|
|
|
/* Run the pre-init to actually probe the unit */
|
|
for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) {
|
|
u8 data = preinit_po1030[i][2];
|
|
if (preinit_po1030[i][0] == SENSOR)
|
|
m5602_write_sensor(sd,
|
|
preinit_po1030[i][1], &data, 1);
|
|
else
|
|
m5602_write_bridge(sd, preinit_po1030[i][1], data);
|
|
}
|
|
|
|
if (po1030_read_sensor(sd, 0x3, &prod_id, 1))
|
|
return -ENODEV;
|
|
|
|
if (po1030_read_sensor(sd, 0x4, &ver_id, 1))
|
|
return -ENODEV;
|
|
|
|
if ((prod_id == 0x02) && (ver_id == 0xef)) {
|
|
info("Detected a po1030 sensor");
|
|
goto sensor_found;
|
|
}
|
|
return -ENODEV;
|
|
|
|
sensor_found:
|
|
sd->gspca_dev.cam.cam_mode = po1030.modes;
|
|
sd->gspca_dev.cam.nmodes = po1030.nmodes;
|
|
sd->desc->ctrls = po1030.ctrls;
|
|
sd->desc->nctrls = po1030.nctrls;
|
|
return 0;
|
|
}
|
|
|
|
int po1030_read_sensor(struct sd *sd, const u8 address,
|
|
u8 *i2c_data, const u8 len)
|
|
{
|
|
int err, i;
|
|
|
|
do {
|
|
err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data);
|
|
} while ((*i2c_data & I2C_BUSY) && !err);
|
|
|
|
err = m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR,
|
|
sd->sensor->i2c_slave_id);
|
|
if (err < 0)
|
|
goto out;
|
|
err = m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address);
|
|
if (err < 0)
|
|
goto out;
|
|
err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x10 + len);
|
|
if (err < 0)
|
|
goto out;
|
|
err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x08);
|
|
if (err < 0)
|
|
goto out;
|
|
|
|
for (i = 0; (i < len) && !err; i++) {
|
|
err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i]));
|
|
|
|
PDEBUG(D_CONF, "Reading sensor register "
|
|
"0x%x containing 0x%x ", address, *i2c_data);
|
|
}
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
int po1030_init(struct sd *sd)
|
|
{
|
|
int i, err = 0;
|
|
|
|
/* Init the sensor */
|
|
for (i = 0; i < ARRAY_SIZE(init_po1030) && !err; i++) {
|
|
u8 data[2] = {0x00, 0x00};
|
|
|
|
switch (init_po1030[i][0]) {
|
|
case BRIDGE:
|
|
err = m5602_write_bridge(sd,
|
|
init_po1030[i][1],
|
|
init_po1030[i][2]);
|
|
break;
|
|
|
|
case SENSOR:
|
|
data[0] = init_po1030[i][2];
|
|
err = m5602_write_sensor(sd,
|
|
init_po1030[i][1], data, 1);
|
|
break;
|
|
|
|
case SENSOR_LONG:
|
|
data[0] = init_po1030[i][2];
|
|
data[1] = init_po1030[i][3];
|
|
err = m5602_write_sensor(sd,
|
|
init_po1030[i][1], data, 2);
|
|
break;
|
|
default:
|
|
info("Invalid stream command, exiting init");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (dump_sensor)
|
|
po1030_dump_registers(sd);
|
|
|
|
return err;
|
|
}
|
|
|
|
int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
u8 i2c_data;
|
|
int err;
|
|
|
|
err = po1030_read_sensor(sd, PO1030_REG_INTEGLINES_H,
|
|
&i2c_data, 1);
|
|
if (err < 0)
|
|
goto out;
|
|
*val = (i2c_data << 8);
|
|
|
|
err = po1030_read_sensor(sd, PO1030_REG_INTEGLINES_M,
|
|
&i2c_data, 1);
|
|
*val |= i2c_data;
|
|
|
|
PDEBUG(D_V4L2, "Exposure read as %d", *val);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
u8 i2c_data;
|
|
int err;
|
|
|
|
PDEBUG(D_V4L2, "Set exposure to %d", val & 0xffff);
|
|
|
|
i2c_data = ((val & 0xff00) >> 8);
|
|
PDEBUG(D_V4L2, "Set exposure to high byte to 0x%x",
|
|
i2c_data);
|
|
|
|
err = m5602_write_sensor(sd, PO1030_REG_INTEGLINES_H,
|
|
&i2c_data, 1);
|
|
if (err < 0)
|
|
goto out;
|
|
|
|
i2c_data = (val & 0xff);
|
|
PDEBUG(D_V4L2, "Set exposure to low byte to 0x%x",
|
|
i2c_data);
|
|
err = m5602_write_sensor(sd, PO1030_REG_INTEGLINES_M,
|
|
&i2c_data, 1);
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
u8 i2c_data;
|
|
int err;
|
|
|
|
err = po1030_read_sensor(sd, PO1030_REG_GLOBALGAIN,
|
|
&i2c_data, 1);
|
|
*val = i2c_data;
|
|
PDEBUG(D_V4L2, "Read global gain %d", *val);
|
|
|
|
return err;
|
|
}
|
|
|
|
int po1030_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
u8 i2c_data;
|
|
int err;
|
|
|
|
err = po1030_read_sensor(sd, PO1030_REG_CONTROL2,
|
|
&i2c_data, 1);
|
|
|
|
*val = (i2c_data >> 7) & 0x01 ;
|
|
|
|
PDEBUG(D_V4L2, "Read hflip %d", *val);
|
|
|
|
return err;
|
|
}
|
|
|
|
int po1030_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
u8 i2c_data;
|
|
int err;
|
|
|
|
PDEBUG(D_V4L2, "Set hflip %d", val);
|
|
|
|
i2c_data = (val & 0x01) << 7;
|
|
|
|
err = m5602_write_sensor(sd, PO1030_REG_CONTROL2,
|
|
&i2c_data, 1);
|
|
|
|
return err;
|
|
}
|
|
|
|
int po1030_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
u8 i2c_data;
|
|
int err;
|
|
|
|
err = po1030_read_sensor(sd, PO1030_REG_GLOBALGAIN,
|
|
&i2c_data, 1);
|
|
|
|
*val = (i2c_data >> 6) & 0x01;
|
|
|
|
PDEBUG(D_V4L2, "Read vflip %d", *val);
|
|
|
|
return err;
|
|
}
|
|
|
|
int po1030_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
u8 i2c_data;
|
|
int err;
|
|
|
|
PDEBUG(D_V4L2, "Set vflip %d", val);
|
|
|
|
i2c_data = (val & 0x01) << 6;
|
|
|
|
err = m5602_write_sensor(sd, PO1030_REG_CONTROL2,
|
|
&i2c_data, 1);
|
|
|
|
return err;
|
|
}
|
|
|
|
int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
u8 i2c_data;
|
|
int err;
|
|
|
|
i2c_data = val & 0xff;
|
|
PDEBUG(D_V4L2, "Set global gain to %d", i2c_data);
|
|
err = m5602_write_sensor(sd, PO1030_REG_GLOBALGAIN,
|
|
&i2c_data, 1);
|
|
return err;
|
|
}
|
|
|
|
int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
u8 i2c_data;
|
|
int err;
|
|
|
|
err = po1030_read_sensor(sd, PO1030_REG_RED_GAIN,
|
|
&i2c_data, 1);
|
|
*val = i2c_data;
|
|
PDEBUG(D_V4L2, "Read red gain %d", *val);
|
|
return err;
|
|
}
|
|
|
|
int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
u8 i2c_data;
|
|
int err;
|
|
|
|
i2c_data = val & 0xff;
|
|
PDEBUG(D_V4L2, "Set red gain to %d", i2c_data);
|
|
err = m5602_write_sensor(sd, PO1030_REG_RED_GAIN,
|
|
&i2c_data, 1);
|
|
return err;
|
|
}
|
|
|
|
int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
u8 i2c_data;
|
|
int err;
|
|
|
|
err = po1030_read_sensor(sd, PO1030_REG_BLUE_GAIN,
|
|
&i2c_data, 1);
|
|
*val = i2c_data;
|
|
PDEBUG(D_V4L2, "Read blue gain %d", *val);
|
|
|
|
return err;
|
|
}
|
|
|
|
int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
u8 i2c_data;
|
|
int err;
|
|
i2c_data = val & 0xff;
|
|
PDEBUG(D_V4L2, "Set blue gain to %d", i2c_data);
|
|
err = m5602_write_sensor(sd, PO1030_REG_BLUE_GAIN,
|
|
&i2c_data, 1);
|
|
|
|
return err;
|
|
}
|
|
|
|
int po1030_power_down(struct sd *sd)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void po1030_dump_registers(struct sd *sd)
|
|
{
|
|
int address;
|
|
u8 value = 0;
|
|
|
|
info("Dumping the po1030 sensor core registers");
|
|
for (address = 0; address < 0x7f; address++) {
|
|
po1030_read_sensor(sd, address, &value, 1);
|
|
info("register 0x%x contains 0x%x",
|
|
address, value);
|
|
}
|
|
|
|
info("po1030 register state dump complete");
|
|
|
|
info("Probing for which registers that are read/write");
|
|
for (address = 0; address < 0xff; address++) {
|
|
u8 old_value, ctrl_value;
|
|
u8 test_value[2] = {0xff, 0xff};
|
|
|
|
po1030_read_sensor(sd, address, &old_value, 1);
|
|
m5602_write_sensor(sd, address, test_value, 1);
|
|
po1030_read_sensor(sd, address, &ctrl_value, 1);
|
|
|
|
if (ctrl_value == test_value[0])
|
|
info("register 0x%x is writeable", address);
|
|
else
|
|
info("register 0x%x is read only", address);
|
|
|
|
/* Restore original value */
|
|
m5602_write_sensor(sd, address, &old_value, 1);
|
|
}
|
|
}
|