linux/drivers/char/mwave
Jeff Garzik 0d626239ff arm/mach-integrator/time.c, mwave: revert portions of recent irq cleanups
The recent irq cleanups for arch/arm/mach-integrator/time.c and
drivers/char/mwave/tp3780i.c changed the request_irq() dev_id
parameter, but neglected to change the matching free_irq() parameter,
thus creating a bug upon irq de-registration.

Given that the impetus for the changes is not yet accepted upstream,
it is best to revert the irq cleanups.

Mostly.  A comment is added to time.c to reduce future confusion,
of type that led to my time.c cleanup in the first place.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-24 08:35:37 -04:00
..
3780i.c [PATCH] mwave: interesting flags savings 2007-02-20 17:10:14 -08:00
3780i.h [PATCH] drivers/char/mwave/3780i.c: cleanups 2005-06-25 16:25:03 -07:00
Makefile Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
mwavedd.c [PATCH] Off-by-one in drivers/char/mwave/mwavedd.c 2006-10-01 00:39:24 -07:00
mwavedd.h Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
mwavepub.h [PATCH] mwave: missing __user in ioctl struct declaration 2005-12-15 10:04:31 -08:00
README remove mentionings of devfs in documentation 2006-10-03 22:17:48 +02:00
smapi.c Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
smapi.h Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
tp3780i.c arm/mach-integrator/time.c, mwave: revert portions of recent irq cleanups 2008-04-24 08:35:37 -04:00
tp3780i.h Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00

Module options
--------------

The mwave module takes the following options.  Note that these options
are not saved by the BIOS and so do not persist after unload and reload.

  mwave_debug=value, where value is bitwise OR of trace flags:
	0x0001 mwavedd api tracing
	0x0002 smapi api tracing
	0x0004 3780i tracing
	0x0008 tp3780i tracing

        Tracing only occurs if the driver has been compiled with the
        MW_TRACE macro #defined  (i.e. let EXTRA_CFLAGS += -DMW_TRACE
        in the Makefile).

  mwave_3780i_irq=5/7/10/11/15
	If the dsp irq has not been setup and stored in bios by the 
	thinkpad configuration utility then this parameter allows the
	irq used by the dsp to be configured.

  mwave_3780i_io=0x130/0x350/0x0070/0xDB0
	If the dsp io range has not been setup and stored in bios by the 
	thinkpad configuration utility then this parameter allows the
	io range used by the dsp to be configured.

  mwave_uart_irq=3/4
	If the mwave's uart irq has not been setup and stored in bios by the 
	thinkpad configuration utility then this parameter allows the
	irq used by the mwave uart to be configured.

  mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8
	If the uart io range has not been setup and stored in bios by the 
	thinkpad configuration utility then this parameter allows the
	io range used by the mwave uart to be configured.

Example to enable the 3780i DSP using ttyS1 resources:
	
  insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8

Accessing the driver
--------------------

You must also create a node for the driver:
  mkdir -p /dev/modems
  mknod --mode=660 /dev/modems/mwave c 10 219