linux/arch/powerpc/platforms/cell/spufs/sched.c
Linus Torvalds 657bd90c93 Scheduler updates for v5.12:
[ NOTE: unfortunately this tree had to be freshly rebased today,
         it's a same-content tree of 82891be90f3c (-next published)
         merged with v5.11.
 
         The main reason for the rebase was an authorship misattribution
         problem with a new commit, which we noticed in the last minute,
         and which we didn't want to be merged upstream. The offending
         commit was deep in the tree, and dependent commits had to be
         rebased as well. ]
 
 - Core scheduler updates:
 
   - Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
     preempt=none/voluntary/full boot options (default: full),
     to allow distros to build a PREEMPT kernel but fall back to
     close to PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling
     behavior via a boot time selection.
 
     There's also the /debug/sched_debug switch to do this runtime.
 
     This feature is implemented via runtime patching (a new variant of static calls).
 
     The scope of the runtime patching can be best reviewed by looking
     at the sched_dynamic_update() function in kernel/sched/core.c.
 
     ( Note that the dynamic none/voluntary mode isn't 100% identical,
       for example preempt-RCU is available in all cases, plus the
       preempt count is maintained in all models, which has runtime
       overhead even with the code patching. )
 
     The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast majority
     of distributions, are supposed to be unaffected.
 
   - Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
     was found via rcutorture triggering a hang. The bug is that
     rcu_idle_enter() may wake up a NOCB kthread, but this happens after
     the last generic need_resched() check. Some cpuidle drivers fix it
     by chance but many others don't.
 
     In true 2020 fashion the original bug fix has grown into a 5-patch
     scheduler/RCU fix series plus another 16 RCU patches to address
     the underlying issue of missed preemption events. These are the
     initial fixes that should fix current incarnations of the bug.
 
   - Clean up rbtree usage in the scheduler, by providing & using the following
     consistent set of rbtree APIs:
 
      partial-order; less() based:
        - rb_add(): add a new entry to the rbtree
        - rb_add_cached(): like rb_add(), but for a rb_root_cached
 
      total-order; cmp() based:
        - rb_find(): find an entry in an rbtree
        - rb_find_add(): find an entry, and add if not found
 
        - rb_find_first(): find the first (leftmost) matching entry
        - rb_next_match(): continue from rb_find_first()
        - rb_for_each(): iterate a sub-tree using the previous two
 
   - Improve the SMP/NUMA load-balancer: scan for an idle sibling in a single pass.
     This is a 4-commit series where each commit improves one aspect of the idle
     sibling scan logic.
 
   - Improve the cpufreq cooling driver by getting the effective CPU utilization
     metrics from the scheduler
 
   - Improve the fair scheduler's active load-balancing logic by reducing the number
     of active LB attempts & lengthen the load-balancing interval. This improves
     stress-ng mmapfork performance.
 
   - Fix CFS's estimated utilization (util_est) calculation bug that can result in
     too high utilization values
 
 - Misc updates & fixes:
 
    - Fix the HRTICK reprogramming & optimization feature
    - Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
    - Reduce dl_add_task_root_domain() overhead
    - Fix uprobes refcount bug
    - Process pending softirqs in flush_smp_call_function_from_idle()
    - Clean up task priority related defines, remove *USER_*PRIO and
      USER_PRIO()
    - Simplify the sched_init_numa() deduplication sort
    - Documentation updates
    - Fix EAS bug in update_misfit_status(), which degraded the quality
      of energy-balancing
    - Smaller cleanups
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmAtHBsRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1itgg/+NGed12pgPjYBzesdou60Lvx7LZLGjfOt
 M1F1EnmQGn/hEH2fCY6ZoqIZQTVltm7GIcBNabzYTzlaHZsdtyuDUJBZyj19vTlk
 zekcj7WVt+qvfjChaNwEJhQ9nnOM/eohMgEOHMAAJd9zlnQvve7NOLQ56UDM+kn/
 9taFJ5ZPvb4avP6C5p3KivvKex6Bjof/Tl0m3utpNyPpI/qK3FyGxwdgCxU0yepT
 ABWQX5ZQCufFvo1bgnBPfqyzab4MqhoM3bNKBsLQfuAlssG1xRv4KQOev4dRwrt9
 pXJikV5C9yez5d2lGe5p0ltH5IZS/l9x2yI/ZQj3OUDTFyV1ic6WfFAqJgDzVF8E
 i/vvA4NPQiI241Bkps+ErcCw4aVOgiY6TWli74cHjLUIX0+As6aHrFWXGSxUmiHB
 WR+B8KmdfzRTTlhOxMA+cvlpZcKCfxWkJJmXzr/lDZzIuKPqM3QCE2wD9sixkfVo
 JNICT0IvZghWOdbMEfZba8Psh/e2LVI9RzdpEiuYJz1ZrVlt1hO0M6jBxY0hMz9n
 k54z81xODw0a8P2FHMtpmB1vhAeqCmvwA6DO8z0Oxs0DFi+KM2bLf2efHsCKafI+
 Bm5v9YFaOk/55R76hJVh+aYLlyFgFkKd+P/niJTPDnxOk3SqJuXvTrql1HeGHkNr
 kYgQa23dsZk=
 =pyaG
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:
 "Core scheduler updates:

   - Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
     preempt=none/voluntary/full boot options (default: full), to allow
     distros to build a PREEMPT kernel but fall back to close to
     PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via
     a boot time selection.

     There's also the /debug/sched_debug switch to do this runtime.

     This feature is implemented via runtime patching (a new variant of
     static calls).

     The scope of the runtime patching can be best reviewed by looking
     at the sched_dynamic_update() function in kernel/sched/core.c.

     ( Note that the dynamic none/voluntary mode isn't 100% identical,
       for example preempt-RCU is available in all cases, plus the
       preempt count is maintained in all models, which has runtime
       overhead even with the code patching. )

     The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast
     majority of distributions, are supposed to be unaffected.

   - Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
     was found via rcutorture triggering a hang. The bug is that
     rcu_idle_enter() may wake up a NOCB kthread, but this happens after
     the last generic need_resched() check. Some cpuidle drivers fix it
     by chance but many others don't.

     In true 2020 fashion the original bug fix has grown into a 5-patch
     scheduler/RCU fix series plus another 16 RCU patches to address the
     underlying issue of missed preemption events. These are the initial
     fixes that should fix current incarnations of the bug.

   - Clean up rbtree usage in the scheduler, by providing & using the
     following consistent set of rbtree APIs:

       partial-order; less() based:
         - rb_add(): add a new entry to the rbtree
         - rb_add_cached(): like rb_add(), but for a rb_root_cached

       total-order; cmp() based:
         - rb_find(): find an entry in an rbtree
         - rb_find_add(): find an entry, and add if not found

         - rb_find_first(): find the first (leftmost) matching entry
         - rb_next_match(): continue from rb_find_first()
         - rb_for_each(): iterate a sub-tree using the previous two

   - Improve the SMP/NUMA load-balancer: scan for an idle sibling in a
     single pass. This is a 4-commit series where each commit improves
     one aspect of the idle sibling scan logic.

   - Improve the cpufreq cooling driver by getting the effective CPU
     utilization metrics from the scheduler

   - Improve the fair scheduler's active load-balancing logic by
     reducing the number of active LB attempts & lengthen the
     load-balancing interval. This improves stress-ng mmapfork
     performance.

   - Fix CFS's estimated utilization (util_est) calculation bug that can
     result in too high utilization values

  Misc updates & fixes:

   - Fix the HRTICK reprogramming & optimization feature

   - Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code

   - Reduce dl_add_task_root_domain() overhead

   - Fix uprobes refcount bug

   - Process pending softirqs in flush_smp_call_function_from_idle()

   - Clean up task priority related defines, remove *USER_*PRIO and
     USER_PRIO()

   - Simplify the sched_init_numa() deduplication sort

   - Documentation updates

   - Fix EAS bug in update_misfit_status(), which degraded the quality
     of energy-balancing

   - Smaller cleanups"

* tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
  sched,x86: Allow !PREEMPT_DYNAMIC
  entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point
  entry: Explicitly flush pending rcuog wakeup before last rescheduling point
  rcu/nocb: Trigger self-IPI on late deferred wake up before user resume
  rcu/nocb: Perform deferred wake up before last idle's need_resched() check
  rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers
  sched/features: Distinguish between NORMAL and DEADLINE hrtick
  sched/features: Fix hrtick reprogramming
  sched/deadline: Reduce rq lock contention in dl_add_task_root_domain()
  uprobes: (Re)add missing get_uprobe() in __find_uprobe()
  smp: Process pending softirqs in flush_smp_call_function_from_idle()
  sched: Harden PREEMPT_DYNAMIC
  static_call: Allow module use without exposing static_call_key
  sched: Add /debug/sched_preempt
  preempt/dynamic: Support dynamic preempt with preempt= boot option
  preempt/dynamic: Provide irqentry_exit_cond_resched() static call
  preempt/dynamic: Provide preempt_schedule[_notrace]() static calls
  preempt/dynamic: Provide cond_resched() and might_resched() static calls
  preempt: Introduce CONFIG_PREEMPT_DYNAMIC
  static_call: Provide DEFINE_STATIC_CALL_RET0()
  ...
2021-02-21 12:35:04 -08:00

1141 lines
28 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/* sched.c - SPU scheduler.
*
* Copyright (C) IBM 2005
* Author: Mark Nutter <mnutter@us.ibm.com>
*
* 2006-03-31 NUMA domains added.
*/
#undef DEBUG
#include <linux/errno.h>
#include <linux/sched/signal.h>
#include <linux/sched/loadavg.h>
#include <linux/sched/rt.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/vmalloc.h>
#include <linux/smp.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/numa.h>
#include <linux/mutex.h>
#include <linux/notifier.h>
#include <linux/kthread.h>
#include <linux/pid_namespace.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
#include <asm/spu.h>
#include <asm/spu_csa.h>
#include <asm/spu_priv1.h>
#include "spufs.h"
#define CREATE_TRACE_POINTS
#include "sputrace.h"
struct spu_prio_array {
DECLARE_BITMAP(bitmap, MAX_PRIO);
struct list_head runq[MAX_PRIO];
spinlock_t runq_lock;
int nr_waiting;
};
static unsigned long spu_avenrun[3];
static struct spu_prio_array *spu_prio;
static struct task_struct *spusched_task;
static struct timer_list spusched_timer;
static struct timer_list spuloadavg_timer;
/*
* Priority of a normal, non-rt, non-niced'd process (aka nice level 0).
*/
#define NORMAL_PRIO 120
/*
* Frequency of the spu scheduler tick. By default we do one SPU scheduler
* tick for every 10 CPU scheduler ticks.
*/
#define SPUSCHED_TICK (10)
/*
* These are the 'tuning knobs' of the scheduler:
*
* Minimum timeslice is 5 msecs (or 1 spu scheduler tick, whichever is
* larger), default timeslice is 100 msecs, maximum timeslice is 800 msecs.
*/
#define MIN_SPU_TIMESLICE max(5 * HZ / (1000 * SPUSCHED_TICK), 1)
#define DEF_SPU_TIMESLICE (100 * HZ / (1000 * SPUSCHED_TICK))
#define SCALE_PRIO(x, prio) \
max(x * (MAX_PRIO - prio) / (NICE_WIDTH / 2), MIN_SPU_TIMESLICE)
/*
* scale user-nice values [ -20 ... 0 ... 19 ] to time slice values:
* [800ms ... 100ms ... 5ms]
*
* The higher a thread's priority, the bigger timeslices
* it gets during one round of execution. But even the lowest
* priority thread gets MIN_TIMESLICE worth of execution time.
*/
void spu_set_timeslice(struct spu_context *ctx)
{
if (ctx->prio < NORMAL_PRIO)
ctx->time_slice = SCALE_PRIO(DEF_SPU_TIMESLICE * 4, ctx->prio);
else
ctx->time_slice = SCALE_PRIO(DEF_SPU_TIMESLICE, ctx->prio);
}
/*
* Update scheduling information from the owning thread.
*/
void __spu_update_sched_info(struct spu_context *ctx)
{
/*
* assert that the context is not on the runqueue, so it is safe
* to change its scheduling parameters.
*/
BUG_ON(!list_empty(&ctx->rq));
/*
* 32-Bit assignments are atomic on powerpc, and we don't care about
* memory ordering here because retrieving the controlling thread is
* per definition racy.
*/
ctx->tid = current->pid;
/*
* We do our own priority calculations, so we normally want
* ->static_prio to start with. Unfortunately this field
* contains junk for threads with a realtime scheduling
* policy so we have to look at ->prio in this case.
*/
if (rt_prio(current->prio))
ctx->prio = current->prio;
else
ctx->prio = current->static_prio;
ctx->policy = current->policy;
/*
* TO DO: the context may be loaded, so we may need to activate
* it again on a different node. But it shouldn't hurt anything
* to update its parameters, because we know that the scheduler
* is not actively looking at this field, since it is not on the
* runqueue. The context will be rescheduled on the proper node
* if it is timesliced or preempted.
*/
cpumask_copy(&ctx->cpus_allowed, current->cpus_ptr);
/* Save the current cpu id for spu interrupt routing. */
ctx->last_ran = raw_smp_processor_id();
}
void spu_update_sched_info(struct spu_context *ctx)
{
int node;
if (ctx->state == SPU_STATE_RUNNABLE) {
node = ctx->spu->node;
/*
* Take list_mutex to sync with find_victim().
*/
mutex_lock(&cbe_spu_info[node].list_mutex);
__spu_update_sched_info(ctx);
mutex_unlock(&cbe_spu_info[node].list_mutex);
} else {
__spu_update_sched_info(ctx);
}
}
static int __node_allowed(struct spu_context *ctx, int node)
{
if (nr_cpus_node(node)) {
const struct cpumask *mask = cpumask_of_node(node);
if (cpumask_intersects(mask, &ctx->cpus_allowed))
return 1;
}
return 0;
}
static int node_allowed(struct spu_context *ctx, int node)
{
int rval;
spin_lock(&spu_prio->runq_lock);
rval = __node_allowed(ctx, node);
spin_unlock(&spu_prio->runq_lock);
return rval;
}
void do_notify_spus_active(void)
{
int node;
/*
* Wake up the active spu_contexts.
*/
for_each_online_node(node) {
struct spu *spu;
mutex_lock(&cbe_spu_info[node].list_mutex);
list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
if (spu->alloc_state != SPU_FREE) {
struct spu_context *ctx = spu->ctx;
set_bit(SPU_SCHED_NOTIFY_ACTIVE,
&ctx->sched_flags);
mb();
wake_up_all(&ctx->stop_wq);
}
}
mutex_unlock(&cbe_spu_info[node].list_mutex);
}
}
/**
* spu_bind_context - bind spu context to physical spu
* @spu: physical spu to bind to
* @ctx: context to bind
*/
static void spu_bind_context(struct spu *spu, struct spu_context *ctx)
{
spu_context_trace(spu_bind_context__enter, ctx, spu);
spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);
if (ctx->flags & SPU_CREATE_NOSCHED)
atomic_inc(&cbe_spu_info[spu->node].reserved_spus);
ctx->stats.slb_flt_base = spu->stats.slb_flt;
ctx->stats.class2_intr_base = spu->stats.class2_intr;
spu_associate_mm(spu, ctx->owner);
spin_lock_irq(&spu->register_lock);
spu->ctx = ctx;
spu->flags = 0;
ctx->spu = spu;
ctx->ops = &spu_hw_ops;
spu->pid = current->pid;
spu->tgid = current->tgid;
spu->ibox_callback = spufs_ibox_callback;
spu->wbox_callback = spufs_wbox_callback;
spu->stop_callback = spufs_stop_callback;
spu->mfc_callback = spufs_mfc_callback;
spin_unlock_irq(&spu->register_lock);
spu_unmap_mappings(ctx);
spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0);
spu_restore(&ctx->csa, spu);
spu->timestamp = jiffies;
ctx->state = SPU_STATE_RUNNABLE;
spuctx_switch_state(ctx, SPU_UTIL_USER);
}
/*
* Must be used with the list_mutex held.
*/
static inline int sched_spu(struct spu *spu)
{
BUG_ON(!mutex_is_locked(&cbe_spu_info[spu->node].list_mutex));
return (!spu->ctx || !(spu->ctx->flags & SPU_CREATE_NOSCHED));
}
static void aff_merge_remaining_ctxs(struct spu_gang *gang)
{
struct spu_context *ctx;
list_for_each_entry(ctx, &gang->aff_list_head, aff_list) {
if (list_empty(&ctx->aff_list))
list_add(&ctx->aff_list, &gang->aff_list_head);
}
gang->aff_flags |= AFF_MERGED;
}
static void aff_set_offsets(struct spu_gang *gang)
{
struct spu_context *ctx;
int offset;
offset = -1;
list_for_each_entry_reverse(ctx, &gang->aff_ref_ctx->aff_list,
aff_list) {
if (&ctx->aff_list == &gang->aff_list_head)
break;
ctx->aff_offset = offset--;
}
offset = 0;
list_for_each_entry(ctx, gang->aff_ref_ctx->aff_list.prev, aff_list) {
if (&ctx->aff_list == &gang->aff_list_head)
break;
ctx->aff_offset = offset++;
}
gang->aff_flags |= AFF_OFFSETS_SET;
}
static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff,
int group_size, int lowest_offset)
{
struct spu *spu;
int node, n;
/*
* TODO: A better algorithm could be used to find a good spu to be
* used as reference location for the ctxs chain.
*/
node = cpu_to_node(raw_smp_processor_id());
for (n = 0; n < MAX_NUMNODES; n++, node++) {
/*
* "available_spus" counts how many spus are not potentially
* going to be used by other affinity gangs whose reference
* context is already in place. Although this code seeks to
* avoid having affinity gangs with a summed amount of
* contexts bigger than the amount of spus in the node,
* this may happen sporadically. In this case, available_spus
* becomes negative, which is harmless.
*/
int available_spus;
node = (node < MAX_NUMNODES) ? node : 0;
if (!node_allowed(ctx, node))
continue;
available_spus = 0;
mutex_lock(&cbe_spu_info[node].list_mutex);
list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
if (spu->ctx && spu->ctx->gang && !spu->ctx->aff_offset
&& spu->ctx->gang->aff_ref_spu)
available_spus -= spu->ctx->gang->contexts;
available_spus++;
}
if (available_spus < ctx->gang->contexts) {
mutex_unlock(&cbe_spu_info[node].list_mutex);
continue;
}
list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
if ((!mem_aff || spu->has_mem_affinity) &&
sched_spu(spu)) {
mutex_unlock(&cbe_spu_info[node].list_mutex);
return spu;
}
}
mutex_unlock(&cbe_spu_info[node].list_mutex);
}
return NULL;
}
static void aff_set_ref_point_location(struct spu_gang *gang)
{
int mem_aff, gs, lowest_offset;
struct spu_context *ctx;
struct spu *tmp;
mem_aff = gang->aff_ref_ctx->flags & SPU_CREATE_AFFINITY_MEM;
lowest_offset = 0;
gs = 0;
list_for_each_entry(tmp, &gang->aff_list_head, aff_list)
gs++;
list_for_each_entry_reverse(ctx, &gang->aff_ref_ctx->aff_list,
aff_list) {
if (&ctx->aff_list == &gang->aff_list_head)
break;
lowest_offset = ctx->aff_offset;
}
gang->aff_ref_spu = aff_ref_location(gang->aff_ref_ctx, mem_aff, gs,
lowest_offset);
}
static struct spu *ctx_location(struct spu *ref, int offset, int node)
{
struct spu *spu;
spu = NULL;
if (offset >= 0) {
list_for_each_entry(spu, ref->aff_list.prev, aff_list) {
BUG_ON(spu->node != node);
if (offset == 0)
break;
if (sched_spu(spu))
offset--;
}
} else {
list_for_each_entry_reverse(spu, ref->aff_list.next, aff_list) {
BUG_ON(spu->node != node);
if (offset == 0)
break;
if (sched_spu(spu))
offset++;
}
}
return spu;
}
/*
* affinity_check is called each time a context is going to be scheduled.
* It returns the spu ptr on which the context must run.
*/
static int has_affinity(struct spu_context *ctx)
{
struct spu_gang *gang = ctx->gang;
if (list_empty(&ctx->aff_list))
return 0;
if (atomic_read(&ctx->gang->aff_sched_count) == 0)
ctx->gang->aff_ref_spu = NULL;
if (!gang->aff_ref_spu) {
if (!(gang->aff_flags & AFF_MERGED))
aff_merge_remaining_ctxs(gang);
if (!(gang->aff_flags & AFF_OFFSETS_SET))
aff_set_offsets(gang);
aff_set_ref_point_location(gang);
}
return gang->aff_ref_spu != NULL;
}
/**
* spu_unbind_context - unbind spu context from physical spu
* @spu: physical spu to unbind from
* @ctx: context to unbind
*/
static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
{
u32 status;
spu_context_trace(spu_unbind_context__enter, ctx, spu);
spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);
if (spu->ctx->flags & SPU_CREATE_NOSCHED)
atomic_dec(&cbe_spu_info[spu->node].reserved_spus);
if (ctx->gang)
/*
* If ctx->gang->aff_sched_count is positive, SPU affinity is
* being considered in this gang. Using atomic_dec_if_positive
* allow us to skip an explicit check for affinity in this gang
*/
atomic_dec_if_positive(&ctx->gang->aff_sched_count);
spu_unmap_mappings(ctx);
spu_save(&ctx->csa, spu);
spu_switch_log_notify(spu, ctx, SWITCH_LOG_STOP, 0);
spin_lock_irq(&spu->register_lock);
spu->timestamp = jiffies;
ctx->state = SPU_STATE_SAVED;
spu->ibox_callback = NULL;
spu->wbox_callback = NULL;
spu->stop_callback = NULL;
spu->mfc_callback = NULL;
spu->pid = 0;
spu->tgid = 0;
ctx->ops = &spu_backing_ops;
spu->flags = 0;
spu->ctx = NULL;
spin_unlock_irq(&spu->register_lock);
spu_associate_mm(spu, NULL);
ctx->stats.slb_flt +=
(spu->stats.slb_flt - ctx->stats.slb_flt_base);
ctx->stats.class2_intr +=
(spu->stats.class2_intr - ctx->stats.class2_intr_base);
/* This maps the underlying spu state to idle */
spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
ctx->spu = NULL;
if (spu_stopped(ctx, &status))
wake_up_all(&ctx->stop_wq);
}
/**
* spu_add_to_rq - add a context to the runqueue
* @ctx: context to add
*/
static void __spu_add_to_rq(struct spu_context *ctx)
{
/*
* Unfortunately this code path can be called from multiple threads
* on behalf of a single context due to the way the problem state
* mmap support works.
*
* Fortunately we need to wake up all these threads at the same time
* and can simply skip the runqueue addition for every but the first
* thread getting into this codepath.
*
* It's still quite hacky, and long-term we should proxy all other
* threads through the owner thread so that spu_run is in control
* of all the scheduling activity for a given context.
*/
if (list_empty(&ctx->rq)) {
list_add_tail(&ctx->rq, &spu_prio->runq[ctx->prio]);
set_bit(ctx->prio, spu_prio->bitmap);
if (!spu_prio->nr_waiting++)
mod_timer(&spusched_timer, jiffies + SPUSCHED_TICK);
}
}
static void spu_add_to_rq(struct spu_context *ctx)
{
spin_lock(&spu_prio->runq_lock);
__spu_add_to_rq(ctx);
spin_unlock(&spu_prio->runq_lock);
}
static void __spu_del_from_rq(struct spu_context *ctx)
{
int prio = ctx->prio;
if (!list_empty(&ctx->rq)) {
if (!--spu_prio->nr_waiting)
del_timer(&spusched_timer);
list_del_init(&ctx->rq);
if (list_empty(&spu_prio->runq[prio]))
clear_bit(prio, spu_prio->bitmap);
}
}
void spu_del_from_rq(struct spu_context *ctx)
{
spin_lock(&spu_prio->runq_lock);
__spu_del_from_rq(ctx);
spin_unlock(&spu_prio->runq_lock);
}
static void spu_prio_wait(struct spu_context *ctx)
{
DEFINE_WAIT(wait);
/*
* The caller must explicitly wait for a context to be loaded
* if the nosched flag is set. If NOSCHED is not set, the caller
* queues the context and waits for an spu event or error.
*/
BUG_ON(!(ctx->flags & SPU_CREATE_NOSCHED));
spin_lock(&spu_prio->runq_lock);
prepare_to_wait_exclusive(&ctx->stop_wq, &wait, TASK_INTERRUPTIBLE);
if (!signal_pending(current)) {
__spu_add_to_rq(ctx);
spin_unlock(&spu_prio->runq_lock);
mutex_unlock(&ctx->state_mutex);
schedule();
mutex_lock(&ctx->state_mutex);
spin_lock(&spu_prio->runq_lock);
__spu_del_from_rq(ctx);
}
spin_unlock(&spu_prio->runq_lock);
__set_current_state(TASK_RUNNING);
remove_wait_queue(&ctx->stop_wq, &wait);
}
static struct spu *spu_get_idle(struct spu_context *ctx)
{
struct spu *spu, *aff_ref_spu;
int node, n;
spu_context_nospu_trace(spu_get_idle__enter, ctx);
if (ctx->gang) {
mutex_lock(&ctx->gang->aff_mutex);
if (has_affinity(ctx)) {
aff_ref_spu = ctx->gang->aff_ref_spu;
atomic_inc(&ctx->gang->aff_sched_count);
mutex_unlock(&ctx->gang->aff_mutex);
node = aff_ref_spu->node;
mutex_lock(&cbe_spu_info[node].list_mutex);
spu = ctx_location(aff_ref_spu, ctx->aff_offset, node);
if (spu && spu->alloc_state == SPU_FREE)
goto found;
mutex_unlock(&cbe_spu_info[node].list_mutex);
atomic_dec(&ctx->gang->aff_sched_count);
goto not_found;
}
mutex_unlock(&ctx->gang->aff_mutex);
}
node = cpu_to_node(raw_smp_processor_id());
for (n = 0; n < MAX_NUMNODES; n++, node++) {
node = (node < MAX_NUMNODES) ? node : 0;
if (!node_allowed(ctx, node))
continue;
mutex_lock(&cbe_spu_info[node].list_mutex);
list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
if (spu->alloc_state == SPU_FREE)
goto found;
}
mutex_unlock(&cbe_spu_info[node].list_mutex);
}
not_found:
spu_context_nospu_trace(spu_get_idle__not_found, ctx);
return NULL;
found:
spu->alloc_state = SPU_USED;
mutex_unlock(&cbe_spu_info[node].list_mutex);
spu_context_trace(spu_get_idle__found, ctx, spu);
spu_init_channels(spu);
return spu;
}
/**
* find_victim - find a lower priority context to preempt
* @ctx: candidate context for running
*
* Returns the freed physical spu to run the new context on.
*/
static struct spu *find_victim(struct spu_context *ctx)
{
struct spu_context *victim = NULL;
struct spu *spu;
int node, n;
spu_context_nospu_trace(spu_find_victim__enter, ctx);
/*
* Look for a possible preemption candidate on the local node first.
* If there is no candidate look at the other nodes. This isn't
* exactly fair, but so far the whole spu scheduler tries to keep
* a strong node affinity. We might want to fine-tune this in
* the future.
*/
restart:
node = cpu_to_node(raw_smp_processor_id());
for (n = 0; n < MAX_NUMNODES; n++, node++) {
node = (node < MAX_NUMNODES) ? node : 0;
if (!node_allowed(ctx, node))
continue;
mutex_lock(&cbe_spu_info[node].list_mutex);
list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
struct spu_context *tmp = spu->ctx;
if (tmp && tmp->prio > ctx->prio &&
!(tmp->flags & SPU_CREATE_NOSCHED) &&
(!victim || tmp->prio > victim->prio)) {
victim = spu->ctx;
}
}
if (victim)
get_spu_context(victim);
mutex_unlock(&cbe_spu_info[node].list_mutex);
if (victim) {
/*
* This nests ctx->state_mutex, but we always lock
* higher priority contexts before lower priority
* ones, so this is safe until we introduce
* priority inheritance schemes.
*
* XXX if the highest priority context is locked,
* this can loop a long time. Might be better to
* look at another context or give up after X retries.
*/
if (!mutex_trylock(&victim->state_mutex)) {
put_spu_context(victim);
victim = NULL;
goto restart;
}
spu = victim->spu;
if (!spu || victim->prio <= ctx->prio) {
/*
* This race can happen because we've dropped
* the active list mutex. Not a problem, just
* restart the search.
*/
mutex_unlock(&victim->state_mutex);
put_spu_context(victim);
victim = NULL;
goto restart;
}
spu_context_trace(__spu_deactivate__unload, ctx, spu);
mutex_lock(&cbe_spu_info[node].list_mutex);
cbe_spu_info[node].nr_active--;
spu_unbind_context(spu, victim);
mutex_unlock(&cbe_spu_info[node].list_mutex);
victim->stats.invol_ctx_switch++;
spu->stats.invol_ctx_switch++;
if (test_bit(SPU_SCHED_SPU_RUN, &victim->sched_flags))
spu_add_to_rq(victim);
mutex_unlock(&victim->state_mutex);
put_spu_context(victim);
return spu;
}
}
return NULL;
}
static void __spu_schedule(struct spu *spu, struct spu_context *ctx)
{
int node = spu->node;
int success = 0;
spu_set_timeslice(ctx);
mutex_lock(&cbe_spu_info[node].list_mutex);
if (spu->ctx == NULL) {
spu_bind_context(spu, ctx);
cbe_spu_info[node].nr_active++;
spu->alloc_state = SPU_USED;
success = 1;
}
mutex_unlock(&cbe_spu_info[node].list_mutex);
if (success)
wake_up_all(&ctx->run_wq);
else
spu_add_to_rq(ctx);
}
static void spu_schedule(struct spu *spu, struct spu_context *ctx)
{
/* not a candidate for interruptible because it's called either
from the scheduler thread or from spu_deactivate */
mutex_lock(&ctx->state_mutex);
if (ctx->state == SPU_STATE_SAVED)
__spu_schedule(spu, ctx);
spu_release(ctx);
}
/**
* spu_unschedule - remove a context from a spu, and possibly release it.
* @spu: The SPU to unschedule from
* @ctx: The context currently scheduled on the SPU
* @free_spu Whether to free the SPU for other contexts
*
* Unbinds the context @ctx from the SPU @spu. If @free_spu is non-zero, the
* SPU is made available for other contexts (ie, may be returned by
* spu_get_idle). If this is zero, the caller is expected to schedule another
* context to this spu.
*
* Should be called with ctx->state_mutex held.
*/
static void spu_unschedule(struct spu *spu, struct spu_context *ctx,
int free_spu)
{
int node = spu->node;
mutex_lock(&cbe_spu_info[node].list_mutex);
cbe_spu_info[node].nr_active--;
if (free_spu)
spu->alloc_state = SPU_FREE;
spu_unbind_context(spu, ctx);
ctx->stats.invol_ctx_switch++;
spu->stats.invol_ctx_switch++;
mutex_unlock(&cbe_spu_info[node].list_mutex);
}
/**
* spu_activate - find a free spu for a context and execute it
* @ctx: spu context to schedule
* @flags: flags (currently ignored)
*
* Tries to find a free spu to run @ctx. If no free spu is available
* add the context to the runqueue so it gets woken up once an spu
* is available.
*/
int spu_activate(struct spu_context *ctx, unsigned long flags)
{
struct spu *spu;
/*
* If there are multiple threads waiting for a single context
* only one actually binds the context while the others will
* only be able to acquire the state_mutex once the context
* already is in runnable state.
*/
if (ctx->spu)
return 0;
spu_activate_top:
if (signal_pending(current))
return -ERESTARTSYS;
spu = spu_get_idle(ctx);
/*
* If this is a realtime thread we try to get it running by
* preempting a lower priority thread.
*/
if (!spu && rt_prio(ctx->prio))
spu = find_victim(ctx);
if (spu) {
unsigned long runcntl;
runcntl = ctx->ops->runcntl_read(ctx);
__spu_schedule(spu, ctx);
if (runcntl & SPU_RUNCNTL_RUNNABLE)
spuctx_switch_state(ctx, SPU_UTIL_USER);
return 0;
}
if (ctx->flags & SPU_CREATE_NOSCHED) {
spu_prio_wait(ctx);
goto spu_activate_top;
}
spu_add_to_rq(ctx);
return 0;
}
/**
* grab_runnable_context - try to find a runnable context
*
* Remove the highest priority context on the runqueue and return it
* to the caller. Returns %NULL if no runnable context was found.
*/
static struct spu_context *grab_runnable_context(int prio, int node)
{
struct spu_context *ctx;
int best;
spin_lock(&spu_prio->runq_lock);
best = find_first_bit(spu_prio->bitmap, prio);
while (best < prio) {
struct list_head *rq = &spu_prio->runq[best];
list_for_each_entry(ctx, rq, rq) {
/* XXX(hch): check for affinity here as well */
if (__node_allowed(ctx, node)) {
__spu_del_from_rq(ctx);
goto found;
}
}
best++;
}
ctx = NULL;
found:
spin_unlock(&spu_prio->runq_lock);
return ctx;
}
static int __spu_deactivate(struct spu_context *ctx, int force, int max_prio)
{
struct spu *spu = ctx->spu;
struct spu_context *new = NULL;
if (spu) {
new = grab_runnable_context(max_prio, spu->node);
if (new || force) {
spu_unschedule(spu, ctx, new == NULL);
if (new) {
if (new->flags & SPU_CREATE_NOSCHED)
wake_up(&new->stop_wq);
else {
spu_release(ctx);
spu_schedule(spu, new);
/* this one can't easily be made
interruptible */
mutex_lock(&ctx->state_mutex);
}
}
}
}
return new != NULL;
}
/**
* spu_deactivate - unbind a context from it's physical spu
* @ctx: spu context to unbind
*
* Unbind @ctx from the physical spu it is running on and schedule
* the highest priority context to run on the freed physical spu.
*/
void spu_deactivate(struct spu_context *ctx)
{
spu_context_nospu_trace(spu_deactivate__enter, ctx);
__spu_deactivate(ctx, 1, MAX_PRIO);
}
/**
* spu_yield - yield a physical spu if others are waiting
* @ctx: spu context to yield
*
* Check if there is a higher priority context waiting and if yes
* unbind @ctx from the physical spu and schedule the highest
* priority context to run on the freed physical spu instead.
*/
void spu_yield(struct spu_context *ctx)
{
spu_context_nospu_trace(spu_yield__enter, ctx);
if (!(ctx->flags & SPU_CREATE_NOSCHED)) {
mutex_lock(&ctx->state_mutex);
__spu_deactivate(ctx, 0, MAX_PRIO);
mutex_unlock(&ctx->state_mutex);
}
}
static noinline void spusched_tick(struct spu_context *ctx)
{
struct spu_context *new = NULL;
struct spu *spu = NULL;
if (spu_acquire(ctx))
BUG(); /* a kernel thread never has signals pending */
if (ctx->state != SPU_STATE_RUNNABLE)
goto out;
if (ctx->flags & SPU_CREATE_NOSCHED)
goto out;
if (ctx->policy == SCHED_FIFO)
goto out;
if (--ctx->time_slice && test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
goto out;
spu = ctx->spu;
spu_context_trace(spusched_tick__preempt, ctx, spu);
new = grab_runnable_context(ctx->prio + 1, spu->node);
if (new) {
spu_unschedule(spu, ctx, 0);
if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
spu_add_to_rq(ctx);
} else {
spu_context_nospu_trace(spusched_tick__newslice, ctx);
if (!ctx->time_slice)
ctx->time_slice++;
}
out:
spu_release(ctx);
if (new)
spu_schedule(spu, new);
}
/**
* count_active_contexts - count nr of active tasks
*
* Return the number of tasks currently running or waiting to run.
*
* Note that we don't take runq_lock / list_mutex here. Reading
* a single 32bit value is atomic on powerpc, and we don't care
* about memory ordering issues here.
*/
static unsigned long count_active_contexts(void)
{
int nr_active = 0, node;
for (node = 0; node < MAX_NUMNODES; node++)
nr_active += cbe_spu_info[node].nr_active;
nr_active += spu_prio->nr_waiting;
return nr_active;
}
/**
* spu_calc_load - update the avenrun load estimates.
*
* No locking against reading these values from userspace, as for
* the CPU loadavg code.
*/
static void spu_calc_load(void)
{
unsigned long active_tasks; /* fixed-point */
active_tasks = count_active_contexts() * FIXED_1;
spu_avenrun[0] = calc_load(spu_avenrun[0], EXP_1, active_tasks);
spu_avenrun[1] = calc_load(spu_avenrun[1], EXP_5, active_tasks);
spu_avenrun[2] = calc_load(spu_avenrun[2], EXP_15, active_tasks);
}
static void spusched_wake(struct timer_list *unused)
{
mod_timer(&spusched_timer, jiffies + SPUSCHED_TICK);
wake_up_process(spusched_task);
}
static void spuloadavg_wake(struct timer_list *unused)
{
mod_timer(&spuloadavg_timer, jiffies + LOAD_FREQ);
spu_calc_load();
}
static int spusched_thread(void *unused)
{
struct spu *spu;
int node;
while (!kthread_should_stop()) {
set_current_state(TASK_INTERRUPTIBLE);
schedule();
for (node = 0; node < MAX_NUMNODES; node++) {
struct mutex *mtx = &cbe_spu_info[node].list_mutex;
mutex_lock(mtx);
list_for_each_entry(spu, &cbe_spu_info[node].spus,
cbe_list) {
struct spu_context *ctx = spu->ctx;
if (ctx) {
get_spu_context(ctx);
mutex_unlock(mtx);
spusched_tick(ctx);
mutex_lock(mtx);
put_spu_context(ctx);
}
}
mutex_unlock(mtx);
}
}
return 0;
}
void spuctx_switch_state(struct spu_context *ctx,
enum spu_utilization_state new_state)
{
unsigned long long curtime;
signed long long delta;
struct spu *spu;
enum spu_utilization_state old_state;
int node;
curtime = ktime_get_ns();
delta = curtime - ctx->stats.tstamp;
WARN_ON(!mutex_is_locked(&ctx->state_mutex));
WARN_ON(delta < 0);
spu = ctx->spu;
old_state = ctx->stats.util_state;
ctx->stats.util_state = new_state;
ctx->stats.tstamp = curtime;
/*
* Update the physical SPU utilization statistics.
*/
if (spu) {
ctx->stats.times[old_state] += delta;
spu->stats.times[old_state] += delta;
spu->stats.util_state = new_state;
spu->stats.tstamp = curtime;
node = spu->node;
if (old_state == SPU_UTIL_USER)
atomic_dec(&cbe_spu_info[node].busy_spus);
if (new_state == SPU_UTIL_USER)
atomic_inc(&cbe_spu_info[node].busy_spus);
}
}
static int show_spu_loadavg(struct seq_file *s, void *private)
{
int a, b, c;
a = spu_avenrun[0] + (FIXED_1/200);
b = spu_avenrun[1] + (FIXED_1/200);
c = spu_avenrun[2] + (FIXED_1/200);
/*
* Note that last_pid doesn't really make much sense for the
* SPU loadavg (it even seems very odd on the CPU side...),
* but we include it here to have a 100% compatible interface.
*/
seq_printf(s, "%d.%02d %d.%02d %d.%02d %ld/%d %d\n",
LOAD_INT(a), LOAD_FRAC(a),
LOAD_INT(b), LOAD_FRAC(b),
LOAD_INT(c), LOAD_FRAC(c),
count_active_contexts(),
atomic_read(&nr_spu_contexts),
idr_get_cursor(&task_active_pid_ns(current)->idr) - 1);
return 0;
};
int __init spu_sched_init(void)
{
struct proc_dir_entry *entry;
int err = -ENOMEM, i;
spu_prio = kzalloc(sizeof(struct spu_prio_array), GFP_KERNEL);
if (!spu_prio)
goto out;
for (i = 0; i < MAX_PRIO; i++) {
INIT_LIST_HEAD(&spu_prio->runq[i]);
__clear_bit(i, spu_prio->bitmap);
}
spin_lock_init(&spu_prio->runq_lock);
timer_setup(&spusched_timer, spusched_wake, 0);
timer_setup(&spuloadavg_timer, spuloadavg_wake, 0);
spusched_task = kthread_run(spusched_thread, NULL, "spusched");
if (IS_ERR(spusched_task)) {
err = PTR_ERR(spusched_task);
goto out_free_spu_prio;
}
mod_timer(&spuloadavg_timer, 0);
entry = proc_create_single("spu_loadavg", 0, NULL, show_spu_loadavg);
if (!entry)
goto out_stop_kthread;
pr_debug("spusched: tick: %d, min ticks: %d, default ticks: %d\n",
SPUSCHED_TICK, MIN_SPU_TIMESLICE, DEF_SPU_TIMESLICE);
return 0;
out_stop_kthread:
kthread_stop(spusched_task);
out_free_spu_prio:
kfree(spu_prio);
out:
return err;
}
void spu_sched_exit(void)
{
struct spu *spu;
int node;
remove_proc_entry("spu_loadavg", NULL);
del_timer_sync(&spusched_timer);
del_timer_sync(&spuloadavg_timer);
kthread_stop(spusched_task);
for (node = 0; node < MAX_NUMNODES; node++) {
mutex_lock(&cbe_spu_info[node].list_mutex);
list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list)
if (spu->alloc_state != SPU_FREE)
spu->alloc_state = SPU_FREE;
mutex_unlock(&cbe_spu_info[node].list_mutex);
}
kfree(spu_prio);
}