This patch adds basic support for Texas Instruments BQ32000 I2C RTC. Only time reading/writing is implemented. Advanced features, such as trickle charger and crystal calibration are not supported. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
		
			
				
	
	
		
			205 lines
		
	
	
		
			4.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			205 lines
		
	
	
		
			4.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Driver for TI BQ32000 RTC.
 | |
|  *
 | |
|  * Copyright (C) 2009 Semihalf.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 as
 | |
|  * published by the Free Software Foundation.
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/rtc.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/bcd.h>
 | |
| 
 | |
| #define BQ32K_SECONDS		0x00	/* Seconds register address */
 | |
| #define BQ32K_SECONDS_MASK	0x7F	/* Mask over seconds value */
 | |
| #define BQ32K_STOP		0x80	/* Oscillator Stop flat */
 | |
| 
 | |
| #define BQ32K_MINUTES		0x01	/* Minutes register address */
 | |
| #define BQ32K_MINUTES_MASK	0x7F	/* Mask over minutes value */
 | |
| #define BQ32K_OF		0x80	/* Oscillator Failure flag */
 | |
| 
 | |
| #define BQ32K_HOURS_MASK	0x3F	/* Mask over hours value */
 | |
| #define BQ32K_CENT		0x40	/* Century flag */
 | |
| #define BQ32K_CENT_EN		0x80	/* Century flag enable bit */
 | |
| 
 | |
| struct bq32k_regs {
 | |
| 	uint8_t		seconds;
 | |
| 	uint8_t		minutes;
 | |
| 	uint8_t		cent_hours;
 | |
| 	uint8_t		day;
 | |
| 	uint8_t		date;
 | |
| 	uint8_t		month;
 | |
| 	uint8_t		years;
 | |
| };
 | |
| 
 | |
| static struct i2c_driver bq32k_driver;
 | |
| 
 | |
| static int bq32k_read(struct device *dev, void *data, uint8_t off, uint8_t len)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	struct i2c_msg msgs[] = {
 | |
| 		{
 | |
| 			.addr = client->addr,
 | |
| 			.flags = 0,
 | |
| 			.len = 1,
 | |
| 			.buf = &off,
 | |
| 		}, {
 | |
| 			.addr = client->addr,
 | |
| 			.flags = I2C_M_RD,
 | |
| 			.len = len,
 | |
| 			.buf = data,
 | |
| 		}
 | |
| 	};
 | |
| 
 | |
| 	if (i2c_transfer(client->adapter, msgs, 2) == 2)
 | |
| 		return 0;
 | |
| 
 | |
| 	return -EIO;
 | |
| }
 | |
| 
 | |
| static int bq32k_write(struct device *dev, void *data, uint8_t off, uint8_t len)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	uint8_t buffer[len + 1];
 | |
| 
 | |
| 	buffer[0] = off;
 | |
| 	memcpy(&buffer[1], data, len);
 | |
| 
 | |
| 	if (i2c_master_send(client, buffer, len + 1) == len + 1)
 | |
| 		return 0;
 | |
| 
 | |
| 	return -EIO;
 | |
| }
 | |
| 
 | |
| static int bq32k_rtc_read_time(struct device *dev, struct rtc_time *tm)
 | |
| {
 | |
| 	struct bq32k_regs regs;
 | |
| 	int error;
 | |
| 
 | |
| 	error = bq32k_read(dev, ®s, 0, sizeof(regs));
 | |
| 	if (error)
 | |
| 		return error;
 | |
| 
 | |
| 	tm->tm_sec = bcd2bin(regs.seconds & BQ32K_SECONDS_MASK);
 | |
| 	tm->tm_min = bcd2bin(regs.minutes & BQ32K_SECONDS_MASK);
 | |
| 	tm->tm_hour = bcd2bin(regs.cent_hours & BQ32K_HOURS_MASK);
 | |
| 	tm->tm_mday = bcd2bin(regs.date);
 | |
| 	tm->tm_wday = bcd2bin(regs.day) - 1;
 | |
| 	tm->tm_mon = bcd2bin(regs.month) - 1;
 | |
| 	tm->tm_year = bcd2bin(regs.years) +
 | |
| 				((regs.cent_hours & BQ32K_CENT) ? 100 : 0);
 | |
| 
 | |
| 	return rtc_valid_tm(tm);
 | |
| }
 | |
| 
 | |
| static int bq32k_rtc_set_time(struct device *dev, struct rtc_time *tm)
 | |
| {
 | |
| 	struct bq32k_regs regs;
 | |
| 
 | |
| 	regs.seconds = bin2bcd(tm->tm_sec);
 | |
| 	regs.minutes = bin2bcd(tm->tm_min);
 | |
| 	regs.cent_hours = bin2bcd(tm->tm_hour) | BQ32K_CENT_EN;
 | |
| 	regs.day = bin2bcd(tm->tm_wday + 1);
 | |
| 	regs.date = bin2bcd(tm->tm_mday);
 | |
| 	regs.month = bin2bcd(tm->tm_mon + 1);
 | |
| 
 | |
| 	if (tm->tm_year >= 100) {
 | |
| 		regs.cent_hours |= BQ32K_CENT;
 | |
| 		regs.years = bin2bcd(tm->tm_year - 100);
 | |
| 	} else
 | |
| 		regs.years = bin2bcd(tm->tm_year);
 | |
| 
 | |
| 	return bq32k_write(dev, ®s, 0, sizeof(regs));
 | |
| }
 | |
| 
 | |
| static const struct rtc_class_ops bq32k_rtc_ops = {
 | |
| 	.read_time	= bq32k_rtc_read_time,
 | |
| 	.set_time	= bq32k_rtc_set_time,
 | |
| };
 | |
| 
 | |
| static int bq32k_probe(struct i2c_client *client,
 | |
| 				const struct i2c_device_id *id)
 | |
| {
 | |
| 	struct device *dev = &client->dev;
 | |
| 	struct rtc_device *rtc;
 | |
| 	uint8_t reg;
 | |
| 	int error;
 | |
| 
 | |
| 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	/* Check Oscillator Stop flag */
 | |
| 	error = bq32k_read(dev, ®, BQ32K_SECONDS, 1);
 | |
| 	if (!error && (reg & BQ32K_STOP)) {
 | |
| 		dev_warn(dev, "Oscillator was halted. Restarting...\n");
 | |
| 		reg &= ~BQ32K_STOP;
 | |
| 		error = bq32k_write(dev, ®, BQ32K_SECONDS, 1);
 | |
| 	}
 | |
| 	if (error)
 | |
| 		return error;
 | |
| 
 | |
| 	/* Check Oscillator Failure flag */
 | |
| 	error = bq32k_read(dev, ®, BQ32K_MINUTES, 1);
 | |
| 	if (!error && (reg & BQ32K_OF)) {
 | |
| 		dev_warn(dev, "Oscillator Failure. Check RTC battery.\n");
 | |
| 		reg &= ~BQ32K_OF;
 | |
| 		error = bq32k_write(dev, ®, BQ32K_MINUTES, 1);
 | |
| 	}
 | |
| 	if (error)
 | |
| 		return error;
 | |
| 
 | |
| 	rtc = rtc_device_register(bq32k_driver.driver.name, &client->dev,
 | |
| 						&bq32k_rtc_ops, THIS_MODULE);
 | |
| 	if (IS_ERR(rtc))
 | |
| 		return PTR_ERR(rtc);
 | |
| 
 | |
| 	i2c_set_clientdata(client, rtc);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int __devexit bq32k_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct rtc_device *rtc = i2c_get_clientdata(client);
 | |
| 
 | |
| 	rtc_device_unregister(rtc);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id bq32k_id[] = {
 | |
| 	{ "bq32000", 0 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, bq32k_id);
 | |
| 
 | |
| static struct i2c_driver bq32k_driver = {
 | |
| 	.driver = {
 | |
| 		.name	= "bq32k",
 | |
| 		.owner	= THIS_MODULE,
 | |
| 	},
 | |
| 	.probe		= bq32k_probe,
 | |
| 	.remove		= __devexit_p(bq32k_remove),
 | |
| 	.id_table	= bq32k_id,
 | |
| };
 | |
| 
 | |
| static __init int bq32k_init(void)
 | |
| {
 | |
| 	return i2c_add_driver(&bq32k_driver);
 | |
| }
 | |
| module_init(bq32k_init);
 | |
| 
 | |
| static __exit void bq32k_exit(void)
 | |
| {
 | |
| 	i2c_del_driver(&bq32k_driver);
 | |
| }
 | |
| module_exit(bq32k_exit);
 | |
| 
 | |
| MODULE_AUTHOR("Semihalf, Piotr Ziecik <kosmo@semihalf.com>");
 | |
| MODULE_DESCRIPTION("TI BQ32000 I2C RTC driver");
 | |
| MODULE_LICENSE("GPL");
 |