leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f2bfdb0628
linux/drivers/tty/serial
History
Masahiro Yamada f2bfdb0628 serial: 8250_early: confirm empty transmitter after sending characters 
The current code waits until the transmitter becomes empty,
before sending each character, and after finishing the whole string.
This seems a bit redundant.

It can be more efficient by checking the transmitter only after sending
each character.  This should be safe because the transmitter is already
empty at the first entry of serial_putc().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13 19:59:48 -08:00
..
8250 serial: 8250_early: confirm empty transmitter after sending characters 2015-12-13 19:59:48 -08:00
cpm_uart tty: serial: cpm_uart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
jsm serial/jsm: Deinline neo_parse_isr, save 688 bytes 2015-12-13 19:59:48 -08:00
21285.c
68328serial.c tty: Remove tty_port::close_wait 2015-10-17 21:11:29 -07:00
altera_jtaguart.c drivers/tty/serial: altera: fix typos in #endif comments 2015-05-06 22:26:58 +02:00
altera_uart.c serial: altera_uart: Use of_property_read_u32 instead of open-coding it 2015-10-04 17:47:49 +01:00
amba-pl010.c
amba-pl011.c serial: amba-pl011: fix incorrect integer size in pl011_fifo_to_tty() 2015-10-17 21:29:21 -07:00
apbuart.c tty: serial: apbuart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
apbuart.h
ar933x_uart.c
arc_uart.c
atmel_serial.c drivers/tty/serial: make serial/atmel_serial.c explicitly non-modular 2015-12-13 19:59:48 -08:00
bcm63xx_uart.c serial/bcm63xx_uart: Deinline wait_for_xmitr, save 374 bytes 2015-12-13 19:59:48 -08:00
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c serial: bfin: ctsrts: enfore Kconfig naming convention 2015-05-06 22:26:59 +02:00
clps711x.c serial: mctrl-gpio: rename init function 2015-10-04 18:46:43 +01:00
crisv10.c tty: Remove tty_port::close_wait 2015-10-17 21:11:29 -07:00
crisv10.h
digicolor-usart.c
dz.c
dz.h
earlycon-arm-semihost.c
earlycon.c serial: earlycon: Add support for big-endian MMIO accesses 2015-06-01 06:55:12 +09:00
efm32-uart.c
etraxfs-uart.c serial: etraxfs-uart: Fix crash 2015-11-20 16:19:54 -08:00
fsl_lpuart.c serial: fsl_lpuart: add earlycon support 2015-10-17 21:18:30 -07:00
icom.c tty: icom.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
icom.h
ifx6x60.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
ifx6x60.h
imx.c serial: imx: reorder functions and simplify a bit 2015-12-13 19:59:48 -08:00
ioc3_serial.c tty: ioc3_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ioc4_serial.c tty: ioc4_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ip22zilog.c
ip22zilog.h
Kconfig serial: fsl_lpuart: Fix earlycon support 2015-11-20 16:19:54 -08:00
kgdb_nmi.c serial: kgdb_nmi: Use bool function return values of true/false not 1/0 2015-05-06 22:26:57 +02:00
kgdboc.c
lantiq.c drivers/tty: make serial/lantic.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
lpc32xx_hs.c tty: serial: lpc32xx_hs: fix handling platform_get_irq result 2015-10-04 19:09:21 +01:00
m32r_sio_reg.h
m32r_sio.c serial/m32r_sio: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
m32r_sio.h
Makefile serial: stm32-usart: Add STM32 USART Driver 2015-06-10 17:34:26 -07:00
max310x.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
max3100.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
mcf.c drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE 2015-05-06 22:26:59 +02:00
men_z135_uart.c serial/men_z135_uart: Deinline men_z135_reg_clr, save 176 bytes 2015-12-13 19:59:48 -08:00
meson_uart.c ARM: meson: serial: convert iounmap to devm_iounmap 2015-05-06 22:27:02 +02:00
mpc52xx_uart.c serial: mpc52xx: add delay after resetting transmitter to fix broken chars 2015-10-04 17:27:56 +01:00
mpsc.c tty: disable unbind for old 74xx based serial/mpsc console port 2015-10-17 21:18:30 -07:00
msm_serial.c tty: serial: msm: Remove 115.2 Kbps maximum baud rate limitation 2015-10-04 19:15:17 +01:00
msm_serial.h tty: serial: msm: Add RX DMA support 2015-10-04 19:15:17 +01:00
mux.c parisc: serial/mux: Convert to uart_console_device instead of open-coded 2015-10-22 15:44:28 +02:00
mxs-auart.c serial: mctrl-gpio: rename init function 2015-10-04 18:46:43 +01:00
netx-serial.c
nwpserial.c
of_serial.c serial: Enable Freescale 16550 workaround on arm 2015-10-17 21:05:46 -07:00
omap-serial.c serial/omap-serial: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
pch_uart.c
pmac_zilog.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c serial/pxa: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
rp2.c
sa1100.c
samsung.c serial: samsung: Fix UART status handling in DMA mode 2015-10-04 17:44:52 +01:00
samsung.h serial: samsung: fix DMA mode enter condition for small FIFO sizes 2015-08-04 22:07:23 -07:00
sb1250-duart.c
sc16is7xx.c spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
sccnxp.c
serial_core.c serial_core: Deinline uart_update_mctrl, save 304 bytes 2015-12-13 19:59:48 -08:00
serial_ks8695.c tty/serial: kill off set_irq_flags usage 2015-06-09 12:26:32 -07:00
serial_mctrl_gpio.c serial: mctrl_gpio: implement interrupt handling 2015-10-04 18:47:51 +01:00
serial_mctrl_gpio.h serial: fix mctrl helper functions 2015-10-17 21:21:07 -07:00
serial_txx9.c
serial-tegra.c serial: tegra: Add helper function for handling RX buffer 2015-10-17 21:07:57 -07:00
sh-sci.c serial: sh-sci: Add DT support to DMA setup 2015-10-04 17:36:10 +01:00
sh-sci.h serial: sh-sci: Correct SCIF_ERROR_CLEAR for plain SCIF 2015-10-04 17:33:48 +01:00
sirfsoc_uart.c serial: sirf: let uart's receive start in right place 2015-07-23 15:32:04 -07:00
sirfsoc_uart.h serial: sirf: let uart's receive start in right place 2015-07-23 15:32:04 -07:00
sn_console.c drivers/tty: make serial/sn_console.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sprd_serial.c serial/sprd_serial: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
st-asc.c tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND 2015-10-04 19:11:05 +01:00
stm32-usart.c tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND 2015-10-04 19:11:05 +01:00
suncore.c drivers/tty: make serial/suncore.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sunhv.c drivers/tty: make serial/sunhv.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sunsab.c
sunsab.h
sunsu.c serial/sunsu: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
sunzilog.c
sunzilog.h
tilegx.c
timbuart.c
timbuart.h
uartlite.c serial: xilinx: Use platform_get_irq to get irq description structure 2015-04-28 14:26:21 +02:00
ucc_uart.c serial/uuc_uart: Support higher bitrates than 115200 Bit/s 2015-07-23 18:05:00 -07:00
vr41xx_siu.c
vt8500_serial.c serial/vt8500_serial: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
xilinx_uartps.c serial: xuartps: add __init to earlycon write method 2015-05-10 19:10:08 +02:00
zs.c
zs.h