forked from Minki/linux
21e59123a8
Add a pinctrl driver for i.MX6 SoloLite based on pinctrl-imx core driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
40 lines
1.5 KiB
Plaintext
40 lines
1.5 KiB
Plaintext
* Freescale IMX6 SoloLite IOMUX Controller
|
|
|
|
Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
|
|
and usage.
|
|
|
|
Required properties:
|
|
- compatible: "fsl,imx6sl-iomuxc"
|
|
- fsl,pins: two integers array, represents a group of pins mux and config
|
|
setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
|
|
pin working on a specific function, CONFIG is the pad setting value like
|
|
pull-up for this pin. Please refer to imx6sl datasheet for the valid pad
|
|
config settings.
|
|
|
|
CONFIG bits definition:
|
|
PAD_CTL_LVE (1 << 22)
|
|
PAD_CTL_HYS (1 << 16)
|
|
PAD_CTL_PUS_100K_DOWN (0 << 14)
|
|
PAD_CTL_PUS_47K_UP (1 << 14)
|
|
PAD_CTL_PUS_100K_UP (2 << 14)
|
|
PAD_CTL_PUS_22K_UP (3 << 14)
|
|
PAD_CTL_PUE (1 << 13)
|
|
PAD_CTL_PKE (1 << 12)
|
|
PAD_CTL_ODE (1 << 11)
|
|
PAD_CTL_SPEED_LOW (1 << 6)
|
|
PAD_CTL_SPEED_MED (2 << 6)
|
|
PAD_CTL_SPEED_HIGH (3 << 6)
|
|
PAD_CTL_DSE_DISABLE (0 << 3)
|
|
PAD_CTL_DSE_240ohm (1 << 3)
|
|
PAD_CTL_DSE_120ohm (2 << 3)
|
|
PAD_CTL_DSE_80ohm (3 << 3)
|
|
PAD_CTL_DSE_60ohm (4 << 3)
|
|
PAD_CTL_DSE_48ohm (5 << 3)
|
|
PAD_CTL_DSE_40ohm (6 << 3)
|
|
PAD_CTL_DSE_34ohm (7 << 3)
|
|
PAD_CTL_SRE_FAST (1 << 0)
|
|
PAD_CTL_SRE_SLOW (0 << 0)
|
|
|
|
Refer to imx6sl-pinfunc.h in device tree source folder for all available
|
|
imx6sl PIN_FUNC_ID.
|