forked from Minki/linux
4e6d1bbcc2
This patch adds device tree binding documentation for the SATA controller found on NVIDIA Tegra SoCs. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
31 lines
1.1 KiB
Plaintext
31 lines
1.1 KiB
Plaintext
Tegra124 SoC SATA AHCI controller
|
|
|
|
Required properties :
|
|
- compatible : "nvidia,tegra124-ahci".
|
|
- reg : Should contain 2 entries:
|
|
- AHCI register set (SATA BAR5)
|
|
- SATA register set
|
|
- interrupts : Defines the interrupt used by SATA
|
|
- clocks : Must contain an entry for each entry in clock-names.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- clock-names : Must include the following entries:
|
|
- sata
|
|
- sata-oob
|
|
- cml1
|
|
- pll_e
|
|
- resets : Must contain an entry for each entry in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- reset-names : Must include the following entries:
|
|
- sata
|
|
- sata-oob
|
|
- sata-cold
|
|
- phys : Must contain an entry for each entry in phy-names.
|
|
See ../phy/phy-bindings.txt for details.
|
|
- phy-names : Must include the following entries:
|
|
- sata-phy : XUSB PADCTL SATA PHY
|
|
- hvdd-supply : Defines the SATA HVDD regulator
|
|
- vddio-supply : Defines the SATA VDDIO regulator
|
|
- avdd-supply : Defines the SATA AVDD regulator
|
|
- target-5v-supply : Defines the SATA 5V power regulator
|
|
- target-12v-supply : Defines the SATA 12V power regulator
|