linux/drivers/mfd/janz-cmodio.c
Mark Brown 0848c94fb4 mfd: core: Push irqdomain mapping out into devices
Currently the MFD core supports remapping MFD cell interrupts using an
irqdomain but only if the MFD is being instantiated using device tree
and only if the device tree bindings use the pattern of registering IPs
in the device tree with compatible properties.  This will be actively
harmful for drivers which support non-DT platforms and use this pattern
for their DT bindings as it will mean that the core will silently change
remapping behaviour and it is also limiting for drivers which don't do
DT with this particular pattern.  There is also a potential fragility if
there are interrupts not associated with MFD cells and all the cells are
omitted from the device tree for some reason.

Instead change the code to take an IRQ domain as an optional argument,
allowing drivers to take the decision about the parent domain for their
interrupts.  The one current user of this feature is ab8500-core, it has
the domain lookup pushed out into the driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-15 23:22:04 +02:00

291 lines
7.1 KiB
C

/*
* Janz CMOD-IO MODULbus Carrier Board PCI Driver
*
* Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
*
* Lots of inspiration and code was copied from drivers/mfd/sm501.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mfd/core.h>
#include <linux/mfd/janz.h>
#define DRV_NAME "janz-cmodio"
/* Size of each MODULbus module in PCI BAR4 */
#define CMODIO_MODULBUS_SIZE 0x200
/* Maximum number of MODULbus modules on a CMOD-IO carrier board */
#define CMODIO_MAX_MODULES 4
/* Module Parameters */
static unsigned int num_modules = CMODIO_MAX_MODULES;
static char *modules[CMODIO_MAX_MODULES] = {
"empty", "empty", "empty", "empty",
};
module_param_array(modules, charp, &num_modules, S_IRUGO);
MODULE_PARM_DESC(modules, "MODULbus modules attached to the carrier board");
/* Unique Device Id */
static unsigned int cmodio_id;
struct cmodio_device {
/* Parent PCI device */
struct pci_dev *pdev;
/* PLX control registers */
struct janz_cmodio_onboard_regs __iomem *ctrl;
/* hex switch position */
u8 hex;
/* mfd-core API */
struct mfd_cell cells[CMODIO_MAX_MODULES];
struct resource resources[3 * CMODIO_MAX_MODULES];
struct janz_platform_data pdata[CMODIO_MAX_MODULES];
};
/*
* Subdevices using the mfd-core API
*/
static int __devinit cmodio_setup_subdevice(struct cmodio_device *priv,
char *name, unsigned int devno,
unsigned int modno)
{
struct janz_platform_data *pdata;
struct mfd_cell *cell;
struct resource *res;
struct pci_dev *pci;
pci = priv->pdev;
cell = &priv->cells[devno];
res = &priv->resources[devno * 3];
pdata = &priv->pdata[devno];
cell->name = name;
cell->resources = res;
cell->num_resources = 3;
/* Setup the subdevice ID -- must be unique */
cell->id = cmodio_id++;
/* Add platform data */
pdata->modno = modno;
cell->platform_data = pdata;
cell->pdata_size = sizeof(*pdata);
/* MODULbus registers -- PCI BAR3 is big-endian MODULbus access */
res->flags = IORESOURCE_MEM;
res->parent = &pci->resource[3];
res->start = pci->resource[3].start + (CMODIO_MODULBUS_SIZE * modno);
res->end = res->start + CMODIO_MODULBUS_SIZE - 1;
res++;
/* PLX Control Registers -- PCI BAR4 is interrupt and other registers */
res->flags = IORESOURCE_MEM;
res->parent = &pci->resource[4];
res->start = pci->resource[4].start;
res->end = pci->resource[4].end;
res++;
/*
* IRQ
*
* The start and end fields are used as an offset to the irq_base
* parameter passed into the mfd_add_devices() function call. All
* devices share the same IRQ.
*/
res->flags = IORESOURCE_IRQ;
res->parent = NULL;
res->start = 0;
res->end = 0;
res++;
return 0;
}
/* Probe each submodule using kernel parameters */
static int __devinit cmodio_probe_submodules(struct cmodio_device *priv)
{
struct pci_dev *pdev = priv->pdev;
unsigned int num_probed = 0;
char *name;
int i;
for (i = 0; i < num_modules; i++) {
name = modules[i];
if (!strcmp(name, "") || !strcmp(name, "empty"))
continue;
dev_dbg(&priv->pdev->dev, "MODULbus %d: name %s\n", i, name);
cmodio_setup_subdevice(priv, name, num_probed, i);
num_probed++;
}
/* print an error message if no modules were probed */
if (num_probed == 0) {
dev_err(&priv->pdev->dev, "no MODULbus modules specified, "
"please set the ``modules'' kernel "
"parameter according to your "
"hardware configuration\n");
return -ENODEV;
}
return mfd_add_devices(&pdev->dev, 0, priv->cells,
num_probed, NULL, pdev->irq, NULL);
}
/*
* SYSFS Attributes
*/
static ssize_t mbus_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct cmodio_device *priv = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%x\n", priv->hex);
}
static DEVICE_ATTR(modulbus_number, S_IRUGO, mbus_show, NULL);
static struct attribute *cmodio_sysfs_attrs[] = {
&dev_attr_modulbus_number.attr,
NULL,
};
static const struct attribute_group cmodio_sysfs_attr_group = {
.attrs = cmodio_sysfs_attrs,
};
/*
* PCI Driver
*/
static int __devinit cmodio_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct cmodio_device *priv;
int ret;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(&dev->dev, "unable to allocate private data\n");
ret = -ENOMEM;
goto out_return;
}
pci_set_drvdata(dev, priv);
priv->pdev = dev;
/* Hardware Initialization */
ret = pci_enable_device(dev);
if (ret) {
dev_err(&dev->dev, "unable to enable device\n");
goto out_free_priv;
}
pci_set_master(dev);
ret = pci_request_regions(dev, DRV_NAME);
if (ret) {
dev_err(&dev->dev, "unable to request regions\n");
goto out_pci_disable_device;
}
/* Onboard configuration registers */
priv->ctrl = pci_ioremap_bar(dev, 4);
if (!priv->ctrl) {
dev_err(&dev->dev, "unable to remap onboard regs\n");
ret = -ENOMEM;
goto out_pci_release_regions;
}
/* Read the hex switch on the carrier board */
priv->hex = ioread8(&priv->ctrl->int_enable);
/* Add the MODULbus number (hex switch value) to the device's sysfs */
ret = sysfs_create_group(&dev->dev.kobj, &cmodio_sysfs_attr_group);
if (ret) {
dev_err(&dev->dev, "unable to create sysfs attributes\n");
goto out_unmap_ctrl;
}
/*
* Disable all interrupt lines, each submodule will enable its
* own interrupt line if needed
*/
iowrite8(0xf, &priv->ctrl->int_disable);
/* Register drivers for all submodules */
ret = cmodio_probe_submodules(priv);
if (ret) {
dev_err(&dev->dev, "unable to probe submodules\n");
goto out_sysfs_remove_group;
}
return 0;
out_sysfs_remove_group:
sysfs_remove_group(&dev->dev.kobj, &cmodio_sysfs_attr_group);
out_unmap_ctrl:
iounmap(priv->ctrl);
out_pci_release_regions:
pci_release_regions(dev);
out_pci_disable_device:
pci_disable_device(dev);
out_free_priv:
kfree(priv);
out_return:
return ret;
}
static void __devexit cmodio_pci_remove(struct pci_dev *dev)
{
struct cmodio_device *priv = pci_get_drvdata(dev);
mfd_remove_devices(&dev->dev);
sysfs_remove_group(&dev->dev.kobj, &cmodio_sysfs_attr_group);
iounmap(priv->ctrl);
pci_release_regions(dev);
pci_disable_device(dev);
kfree(priv);
}
#define PCI_VENDOR_ID_JANZ 0x13c3
/* The list of devices that this module will support */
static DEFINE_PCI_DEVICE_TABLE(cmodio_pci_ids) = {
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_JANZ, 0x0101 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_JANZ, 0x0100 },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, cmodio_pci_ids);
static struct pci_driver cmodio_pci_driver = {
.name = DRV_NAME,
.id_table = cmodio_pci_ids,
.probe = cmodio_pci_probe,
.remove = __devexit_p(cmodio_pci_remove),
};
module_pci_driver(cmodio_pci_driver);
MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
MODULE_DESCRIPTION("Janz CMOD-IO PCI MODULbus Carrier Board Driver");
MODULE_LICENSE("GPL");