leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ef0a59924a
linux/drivers/usb/host
History
Alan Stern 7312b5ddd4 USB: EHCI: unlink QHs even after the controller has stopped 
Old code in ehci-hcd tries to expedite disabling endpoints after the
controller has stopped, by destroying the endpoint's associated QH
without first unlinking the QH.  This was necessary back when the
driver wasn't so careful about keeping track of the controller's
state.

But now we are careful about it, and the driver knows that when the
controller isn't running, no unlinking delay is needed.  Furthermore,
skipping the unlink step will trigger a BUG() in qh_destroy() when the
preceding QH is released, because the link pointer will be non-NULL.

Removing the lines that skip the unlinking step and go directly to
QH_STATE_IDLE fixes the problem.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-19 14:59:17 -07:00
..
whci usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
bcma-hcd.c DMA-API: usb: bcma: replace dma_set_mask()+dma_set_coherent_mask() with new helper 2013-10-31 14:48:34 +00:00
ehci-atmel.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ehci-dbg.c usb: Use dev_is_pci() to check whether it is pci device 2013-12-08 18:01:56 -08:00
ehci-exynos.c Revert "usb: ehci/ohci-exynos: Fix PHY getting sequence" 2014-08-27 15:23:53 -07:00
ehci-fsl.c fsl-usb: do not test for PHY_CLK_VALID bit on controller version 1.6 2014-05-03 18:04:28 -04:00
ehci-fsl.h
ehci-grlib.c USB: ehci-grlib: use dev_err() instead of printk() 2013-12-18 16:32:41 -08:00
ehci-hcd.c USB: EHCI: unlink QHs even after the controller has stopped 2014-09-19 14:59:17 -07:00
ehci-hub.c usb: ehci: using wIndex + 1 for hub port 2014-08-25 13:11:27 -07:00
ehci-mem.c USB: EHCI: don't allocate hardware periodic table atomically by default 2014-07-09 16:16:07 -07:00
ehci-msm.c USB: ehci-msm: Make of_device_id array const 2014-07-09 16:13:03 -07:00
ehci-mv.c usb: host: ehci-mv: Use devm_ioremap_resource instead of devm_ioremap 2014-05-27 14:52:29 -07:00
ehci-mxc.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ehci-octeon.c USB: ehci-octeon: Use devm_ioremap_resource() 2013-12-18 16:34:20 -08:00
ehci-omap.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ehci-orion.c usb: ehci-orion: add optional PHY support 2014-05-27 15:33:12 -07:00
ehci-pci.c USB: ehci-pci: USB host controller support for Intel Quark X1000 2014-07-09 16:16:07 -07:00
ehci-platform.c usb: ehci-platform: add optional reset controller retrieval 2014-05-27 15:53:01 -07:00
ehci-pmcmsp.c MIPS: MSP71xx: Remove checks for two macros 2014-05-23 15:12:39 +02:00
ehci-ppc-of.c USB: ehci-ppc-of: use dev_err() instead of printk() 2013-12-18 16:32:41 -08:00
ehci-ps3.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ehci-q.c usb: kill DEBUG compile option 2013-12-03 10:34:33 -08:00
ehci-sched.c USB: EHCI: fix sparse errors 2013-10-19 14:08:04 -07:00
ehci-sead3.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ehci-sh.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ehci-spear.c USB: ehci-spear: Make of_device_id array const 2014-07-09 16:13:03 -07:00
ehci-sysfs.c USB: EHCI: use a bandwidth-allocation table 2013-10-11 16:45:43 -07:00
ehci-tegra.c USB: EHCI: tegra: Fix probe order issue leading to broken USB 2014-07-09 16:25:46 -07:00
ehci-tilegx.c tile: usb: Use irq_alloc/free_hwirq 2014-05-16 14:05:20 +02:00
ehci-timer.c USB: EHCI: improve interrupt qh unlink 2013-08-12 11:43:48 -07:00
ehci-w90x900.c USB: ehci-w90x900: Use devm_ioremap_resource() 2013-12-18 16:35:11 -08:00
ehci-xilinx-of.c USB: ehci-xilinx-of: use dev_err() instead of printk() 2013-12-18 16:32:41 -08:00
ehci.h USB: EHCI: Export the ehci_hub_control function 2014-04-24 13:05:32 -07:00
fhci-dbg.c drivers/usb/host/fhci-dbg.c: remove unnecessary null test before debugfs_remove 2014-07-09 16:13:03 -07:00
fhci-hcd.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
fhci-hub.c
fhci-mem.c
fhci-q.c
fhci-sched.c USB: FHCI: upgrade the isochronous API 2013-05-30 21:34:31 +09:00
fhci-tds.c
fhci.h USB: FHCI: upgrade the isochronous API 2013-05-30 21:34:31 +09:00
fotg210-hcd.c fotg210: Use managed interfaces for allocation of resources 2014-07-09 16:31:48 -07:00
fotg210.h fotg210: remove conditional compilation 2013-12-03 10:28:39 -08:00
fsl-mph-dr-of.c USB: fsl-mph-dr-of: adjust for OF based clock lookup 2014-01-12 18:53:05 +01:00
fusbh200-hcd.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
fusbh200.h fusb200h: always compile in debugfs support 2013-12-03 10:31:21 -08:00
hwa-hc.c usb: wusbcore: disable transfer notifications for Alereon HWAs 2014-03-07 12:52:04 -08:00
imx21-dbg.c usb: kill DEBUG compile option 2013-12-03 10:34:33 -08:00
imx21-hcd.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
imx21-hcd.h usb: kill DEBUG compile option 2013-12-03 10:34:33 -08:00
isp116x-hcd.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
isp116x.h USB: isp116x: remove dependency on CONFIG_USB_DEBUG 2013-07-23 16:35:17 -07:00
isp1362-hcd.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
isp1362.h USB: isp1362: move debug files from proc to debugfs 2013-07-24 14:43:05 -07:00
isp1760-hcd.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
isp1760-hcd.h
isp1760-if.c USB: host: use dev_get_platdata() 2013-07-31 17:53:50 -07:00
Kconfig usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers 2014-07-09 15:49:10 -07:00
Makefile usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers 2014-07-09 15:49:10 -07:00
max3421-hcd.c usb: host: max3421-hcd: unconditionally use GFP_ATOMIC in max3421_urb_enqueue() 2014-07-09 16:06:50 -07:00
octeon2-common.c
ohci-at91.c USB: OHCI: Export the OHCI hub control and status_data functions 2014-04-24 13:05:32 -07:00
ohci-da8xx.c USB: ohci-da8xx: Use devm_*() functions 2013-12-18 16:35:11 -08:00
ohci-dbg.c USB: OHCI: fix bugs in debug routines 2014-07-17 17:05:07 -07:00
ohci-exynos.c Revert "usb: ehci/ohci-exynos: Fix PHY getting sequence" 2014-08-27 15:23:53 -07:00
ohci-hcd.c USB: OHCI: add check for stopped frame counter 2014-07-18 16:34:29 -07:00
ohci-hub.c USB: OHCI: add I/O watchdog for orphan TDs 2014-07-18 16:34:07 -07:00
ohci-jz4740.c USB: ohci-jz4740: FEAT_POWER is a port feature, not a hub feature 2014-04-16 13:59:41 -07:00
ohci-mem.c USB: OHCI: add I/O watchdog for orphan TDs 2014-07-18 16:34:07 -07:00
ohci-nxp.c USB: ohci-nxp: Use devm_clk_get() 2013-12-18 16:36:10 -08:00
ohci-octeon.c USB: ohci-octeon: Use devm_ioremap_resource() 2013-12-18 16:36:11 -08:00
ohci-omap3.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ohci-omap.c USB: ohci-omap: use dev_err() instead of printk() 2013-12-18 16:32:41 -08:00
ohci-pci.c USB: OHCI: fix problem with global suspend on ATI controllers 2014-05-03 17:58:46 -04:00
ohci-platform.c usb: ohci-platform: Enable optional use of reset controller 2014-05-27 15:53:00 -07:00
ohci-ppc-of.c USB: ohci-ppc-of: Use devm_ioremap_resource() 2013-12-18 16:36:10 -08:00
ohci-ps3.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ohci-pxa27x.c USB: ohci-pxa27x: Add support for external vbus regulators 2014-04-24 13:05:32 -07:00
ohci-q.c USB: OHCI: add I/O watchdog for orphan TDs 2014-07-18 16:34:07 -07:00
ohci-s3c2410.c USB: OHCI: Export the OHCI hub control and status_data functions 2014-04-24 13:05:32 -07:00
ohci-sa1111.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ohci-sm501.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
ohci-spear.c USB: ohci-spear: Make of_device_id array const 2014-07-09 16:13:03 -07:00
ohci-tilegx.c tile: usb: Use irq_alloc/free_hwirq 2014-05-16 14:05:20 +02:00
ohci-tmio.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
ohci.h USB: OHCI: add check for stopped frame counter 2014-07-18 16:34:29 -07:00
oxu210hp-hcd.c USB: oxu210hp-hcd.c: use devm_ functions 2014-07-09 16:11:11 -07:00
oxu210hp.h
pci-quirks.c USB: EHCI: avoid BIOS handover on the HASEE E200 2014-06-17 17:05:49 -07:00
pci-quirks.h usb: pci_quirks: fix sparse 'symbol not declared' warning 2014-05-27 16:25:32 -07:00
r8a66597-hcd.c ARM: driver updates for 3.14 2014-01-23 18:49:36 -08:00
r8a66597.h
sl811_cs.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
sl811-hcd.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
sl811.h USB: sl811: move debug files from proc to debugfs 2013-07-24 14:43:05 -07:00
ssb-hcd.c DMA-API: usb: ssb-hcd: replace dma_set_mask()+dma_set_coherent_mask() with new helper 2013-10-31 14:48:36 +00:00
u132-hcd.c usb: hcd: move controller wakeup setting initialization to individual driver 2013-12-08 18:06:46 -08:00
uhci-debug.c usb: kill DEBUG compile option 2013-12-03 10:34:33 -08:00
uhci-grlib.c usb: host: uhci-grlib.c : use devm_ functions 2014-07-09 16:25:22 -07:00
uhci-hcd.c USB: UHCI: don't allocate frame list atomically 2014-07-09 16:16:07 -07:00
uhci-hcd.h
uhci-hub.c USB/host: Bugfix: Return length of copied buffer in uhci_hub_control() 2013-10-07 00:07:17 -07:00
uhci-pci.c USB: remove DEFINE_PCI_DEVICE_TABLE macro 2013-12-04 16:58:47 -08:00
uhci-platform.c uhci-platform: use devm_ioremap resource 2014-07-09 16:31:48 -07:00
uhci-q.c USB: UHCI: accept very late isochronous URBs 2013-09-25 17:05:34 -07:00
xhci-dbg.c Revert "xhci: replace xhci_read_64() with readq()" 2014-01-30 13:27:49 -08:00
xhci-ext-caps.h xhci: fix port BESL LPM capability checking 2013-08-27 08:54:42 -07:00
xhci-hub.c usb: host: xhci: fix compliance mode workaround 2014-09-08 14:30:42 -07:00
xhci-mem.c usb: xhci: Fix OOPS in xhci error handling code 2014-09-11 14:23:52 -07:00
xhci-mvebu.c usb: host: xhci-plat: add support for the Armada 375/38x XHCI controllers 2014-05-27 15:40:40 -07:00
xhci-mvebu.h usb: host: xhci-plat: add support for the Armada 375/38x XHCI controllers 2014-05-27 15:40:40 -07:00
xhci-pci.c xhci: Disable streams on Via XHCI with device-id 0x3432 2014-08-27 13:35:38 -07:00
xhci-plat.c usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers 2014-07-09 15:49:10 -07:00
xhci-rcar.c usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers 2014-07-09 15:49:10 -07:00
xhci-rcar.h usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers 2014-07-09 15:49:10 -07:00
xhci-ring.c xhci: rework cycle bit checking for new dequeue pointers 2014-08-19 11:27:36 -05:00
xhci-trace.c xhci: add traces for debug messages in xhci_address_device() 2013-08-13 16:05:38 -07:00
xhci-trace.h xhci: fix sparse warning in xhci-trace.h 2013-12-02 12:59:45 -08:00
xhci.c xhci: fix oops when xhci resumes from hibernate with hw lpm capable devices 2014-09-11 14:23:52 -07:00
xhci.h xhci: Blacklist using streams on the Etron EJ168 controller 2014-08-01 15:49:34 -07:00