forked from Minki/linux
271f5ca638
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
520 lines
14 KiB
C
520 lines
14 KiB
C
/*
|
|
* arch/arm/mach-ep93xx/core.c
|
|
* Core routines for Cirrus EP93xx chips.
|
|
*
|
|
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
|
|
*
|
|
* Thanks go to Michael Burian and Ray Lehtiniemi for their key
|
|
* role in the ep93xx linux community.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/time.h>
|
|
#include <linux/timex.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/termios.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/amba/serial.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/system.h>
|
|
#include <asm/tlbflush.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/arch/gpio.h>
|
|
|
|
#include <asm/hardware/vic.h>
|
|
|
|
|
|
/*************************************************************************
|
|
* Static I/O mappings that are needed for all EP93xx platforms
|
|
*************************************************************************/
|
|
static struct map_desc ep93xx_io_desc[] __initdata = {
|
|
{
|
|
.virtual = EP93XX_AHB_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
|
|
.length = EP93XX_AHB_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = EP93XX_APB_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE),
|
|
.length = EP93XX_APB_SIZE,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
void __init ep93xx_map_io(void)
|
|
{
|
|
iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* Timer handling for EP93xx
|
|
*************************************************************************
|
|
* The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and
|
|
* 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
|
|
* an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz,
|
|
* is free-running, and can't generate interrupts.
|
|
*
|
|
* The 508 kHz timers are ideal for use for the timer interrupt, as the
|
|
* most common values of HZ divide 508 kHz nicely. We pick one of the 16
|
|
* bit timers (timer 1) since we don't need more than 16 bits of reload
|
|
* value as long as HZ >= 8.
|
|
*
|
|
* The higher clock rate of timer 4 makes it a better choice than the
|
|
* other timers for use in gettimeoffset(), while the fact that it can't
|
|
* generate interrupts means we don't have to worry about not being able
|
|
* to use this timer for something else. We also use timer 4 for keeping
|
|
* track of lost jiffies.
|
|
*/
|
|
static unsigned int last_jiffy_time;
|
|
|
|
#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
|
|
|
|
static int ep93xx_timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
write_seqlock(&xtime_lock);
|
|
|
|
__raw_writel(1, EP93XX_TIMER1_CLEAR);
|
|
while ((signed long)
|
|
(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
|
|
>= TIMER4_TICKS_PER_JIFFY) {
|
|
last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
|
|
timer_tick();
|
|
}
|
|
|
|
write_sequnlock(&xtime_lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction ep93xx_timer_irq = {
|
|
.name = "ep93xx timer",
|
|
.flags = IRQF_DISABLED | IRQF_TIMER,
|
|
.handler = ep93xx_timer_interrupt,
|
|
};
|
|
|
|
static void __init ep93xx_timer_init(void)
|
|
{
|
|
/* Enable periodic HZ timer. */
|
|
__raw_writel(0x48, EP93XX_TIMER1_CONTROL);
|
|
__raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
|
|
__raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
|
|
|
|
/* Enable lost jiffy timer. */
|
|
__raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
|
|
|
|
setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
|
|
}
|
|
|
|
static unsigned long ep93xx_gettimeoffset(void)
|
|
{
|
|
int offset;
|
|
|
|
offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
|
|
|
|
/* Calculate (1000000 / 983040) * offset. */
|
|
return offset + (53 * offset / 3072);
|
|
}
|
|
|
|
struct sys_timer ep93xx_timer = {
|
|
.init = ep93xx_timer_init,
|
|
.offset = ep93xx_gettimeoffset,
|
|
};
|
|
|
|
|
|
/*************************************************************************
|
|
* GPIO handling for EP93xx
|
|
*************************************************************************/
|
|
static unsigned char gpio_int_unmasked[3];
|
|
static unsigned char gpio_int_enabled[3];
|
|
static unsigned char gpio_int_type1[3];
|
|
static unsigned char gpio_int_type2[3];
|
|
|
|
static void update_gpio_int_params(int abf)
|
|
{
|
|
if (abf == 0) {
|
|
__raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
|
|
__raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
|
|
__raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
|
|
__raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE);
|
|
} else if (abf == 1) {
|
|
__raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
|
|
__raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
|
|
__raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
|
|
__raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE);
|
|
} else if (abf == 2) {
|
|
__raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE);
|
|
__raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2);
|
|
__raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1);
|
|
__raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE);
|
|
} else {
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
|
|
static unsigned char data_register_offset[8] = {
|
|
0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40,
|
|
};
|
|
|
|
static unsigned char data_direction_register_offset[8] = {
|
|
0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44,
|
|
};
|
|
|
|
void gpio_line_config(int line, int direction)
|
|
{
|
|
unsigned int data_direction_register;
|
|
unsigned long flags;
|
|
unsigned char v;
|
|
|
|
data_direction_register =
|
|
EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]);
|
|
|
|
local_irq_save(flags);
|
|
if (direction == GPIO_OUT) {
|
|
if (line >= 0 && line < 16) {
|
|
/* Port A/B. */
|
|
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
|
|
update_gpio_int_params(line >> 3);
|
|
} else if (line >= 40 && line < 48) {
|
|
/* Port F. */
|
|
gpio_int_unmasked[2] &= ~(1 << (line & 7));
|
|
update_gpio_int_params(2);
|
|
}
|
|
|
|
v = __raw_readb(data_direction_register);
|
|
v |= 1 << (line & 7);
|
|
__raw_writeb(v, data_direction_register);
|
|
} else if (direction == GPIO_IN) {
|
|
v = __raw_readb(data_direction_register);
|
|
v &= ~(1 << (line & 7));
|
|
__raw_writeb(v, data_direction_register);
|
|
}
|
|
local_irq_restore(flags);
|
|
}
|
|
EXPORT_SYMBOL(gpio_line_config);
|
|
|
|
int gpio_line_get(int line)
|
|
{
|
|
unsigned int data_register;
|
|
|
|
data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
|
|
|
|
return !!(__raw_readb(data_register) & (1 << (line & 7)));
|
|
}
|
|
EXPORT_SYMBOL(gpio_line_get);
|
|
|
|
void gpio_line_set(int line, int value)
|
|
{
|
|
unsigned int data_register;
|
|
unsigned long flags;
|
|
unsigned char v;
|
|
|
|
data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
|
|
|
|
local_irq_save(flags);
|
|
if (value == EP93XX_GPIO_HIGH) {
|
|
v = __raw_readb(data_register);
|
|
v |= 1 << (line & 7);
|
|
__raw_writeb(v, data_register);
|
|
} else if (value == EP93XX_GPIO_LOW) {
|
|
v = __raw_readb(data_register);
|
|
v &= ~(1 << (line & 7));
|
|
__raw_writeb(v, data_register);
|
|
}
|
|
local_irq_restore(flags);
|
|
}
|
|
EXPORT_SYMBOL(gpio_line_set);
|
|
|
|
|
|
/*************************************************************************
|
|
* EP93xx IRQ handling
|
|
*************************************************************************/
|
|
static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
unsigned char status;
|
|
int i;
|
|
|
|
status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
|
|
for (i = 0; i < 8; i++) {
|
|
if (status & (1 << i)) {
|
|
desc = irq_desc + IRQ_EP93XX_GPIO(0) + i;
|
|
desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc);
|
|
}
|
|
}
|
|
|
|
status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
|
|
for (i = 0; i < 8; i++) {
|
|
if (status & (1 << i)) {
|
|
desc = irq_desc + IRQ_EP93XX_GPIO(8) + i;
|
|
desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4);
|
|
|
|
desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
|
|
}
|
|
|
|
static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
|
|
{
|
|
int line = irq - IRQ_EP93XX_GPIO(0);
|
|
int port = line >> 3;
|
|
|
|
gpio_int_unmasked[port] &= ~(1 << (line & 7));
|
|
update_gpio_int_params(port);
|
|
|
|
if (port == 0) {
|
|
__raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
|
|
} else if (port == 1) {
|
|
__raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
|
|
} else if (port == 2) {
|
|
__raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK);
|
|
}
|
|
}
|
|
|
|
static void ep93xx_gpio_irq_mask(unsigned int irq)
|
|
{
|
|
int line = irq - IRQ_EP93XX_GPIO(0);
|
|
int port = line >> 3;
|
|
|
|
gpio_int_unmasked[port] &= ~(1 << (line & 7));
|
|
update_gpio_int_params(port);
|
|
}
|
|
|
|
static void ep93xx_gpio_irq_unmask(unsigned int irq)
|
|
{
|
|
int line = irq - IRQ_EP93XX_GPIO(0);
|
|
int port = line >> 3;
|
|
|
|
gpio_int_unmasked[port] |= 1 << (line & 7);
|
|
update_gpio_int_params(port);
|
|
}
|
|
|
|
|
|
/*
|
|
* gpio_int_type1 controls whether the interrupt is level (0) or
|
|
* edge (1) triggered, while gpio_int_type2 controls whether it
|
|
* triggers on low/falling (0) or high/rising (1).
|
|
*/
|
|
static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
|
|
{
|
|
int port;
|
|
int line;
|
|
|
|
line = irq - IRQ_EP93XX_GPIO(0);
|
|
if (line >= 0 && line < 16) {
|
|
gpio_line_config(line, GPIO_IN);
|
|
} else {
|
|
gpio_line_config(EP93XX_GPIO_LINE_F(line), GPIO_IN);
|
|
}
|
|
|
|
port = line >> 3;
|
|
line &= 7;
|
|
|
|
if (type & IRQT_RISING) {
|
|
gpio_int_enabled[port] |= 1 << line;
|
|
gpio_int_type1[port] |= 1 << line;
|
|
gpio_int_type2[port] |= 1 << line;
|
|
} else if (type & IRQT_FALLING) {
|
|
gpio_int_enabled[port] |= 1 << line;
|
|
gpio_int_type1[port] |= 1 << line;
|
|
gpio_int_type2[port] &= ~(1 << line);
|
|
} else if (type & IRQT_HIGH) {
|
|
gpio_int_enabled[port] |= 1 << line;
|
|
gpio_int_type1[port] &= ~(1 << line);
|
|
gpio_int_type2[port] |= 1 << line;
|
|
} else if (type & IRQT_LOW) {
|
|
gpio_int_enabled[port] |= 1 << line;
|
|
gpio_int_type1[port] &= ~(1 << line);
|
|
gpio_int_type2[port] &= ~(1 << line);
|
|
} else {
|
|
gpio_int_enabled[port] &= ~(1 << line);
|
|
}
|
|
update_gpio_int_params(port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip ep93xx_gpio_irq_chip = {
|
|
.name = "GPIO",
|
|
.ack = ep93xx_gpio_irq_mask_ack,
|
|
.mask = ep93xx_gpio_irq_mask,
|
|
.unmask = ep93xx_gpio_irq_unmask,
|
|
.set_type = ep93xx_gpio_irq_type,
|
|
};
|
|
|
|
|
|
void __init ep93xx_init_irq(void)
|
|
{
|
|
int irq;
|
|
|
|
vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
|
|
vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
|
|
|
|
for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) {
|
|
set_irq_chip(irq, &ep93xx_gpio_irq_chip);
|
|
set_irq_handler(irq, handle_level_irq);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
}
|
|
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
|
|
set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* EP93xx peripheral handling
|
|
*************************************************************************/
|
|
#define EP93XX_UART_MCR_OFFSET (0x0100)
|
|
|
|
static void ep93xx_uart_set_mctrl(struct amba_device *dev,
|
|
void __iomem *base, unsigned int mctrl)
|
|
{
|
|
unsigned int mcr;
|
|
|
|
mcr = 0;
|
|
if (!(mctrl & TIOCM_RTS))
|
|
mcr |= 2;
|
|
if (!(mctrl & TIOCM_DTR))
|
|
mcr |= 1;
|
|
|
|
__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
|
|
}
|
|
|
|
static struct amba_pl010_data ep93xx_uart_data = {
|
|
.set_mctrl = ep93xx_uart_set_mctrl,
|
|
};
|
|
|
|
static struct amba_device uart1_device = {
|
|
.dev = {
|
|
.bus_id = "apb:uart1",
|
|
.platform_data = &ep93xx_uart_data,
|
|
},
|
|
.res = {
|
|
.start = EP93XX_UART1_PHYS_BASE,
|
|
.end = EP93XX_UART1_PHYS_BASE + 0x0fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
.irq = { IRQ_EP93XX_UART1, NO_IRQ },
|
|
.periphid = 0x00041010,
|
|
};
|
|
|
|
static struct amba_device uart2_device = {
|
|
.dev = {
|
|
.bus_id = "apb:uart2",
|
|
.platform_data = &ep93xx_uart_data,
|
|
},
|
|
.res = {
|
|
.start = EP93XX_UART2_PHYS_BASE,
|
|
.end = EP93XX_UART2_PHYS_BASE + 0x0fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
.irq = { IRQ_EP93XX_UART2, NO_IRQ },
|
|
.periphid = 0x00041010,
|
|
};
|
|
|
|
static struct amba_device uart3_device = {
|
|
.dev = {
|
|
.bus_id = "apb:uart3",
|
|
.platform_data = &ep93xx_uart_data,
|
|
},
|
|
.res = {
|
|
.start = EP93XX_UART3_PHYS_BASE,
|
|
.end = EP93XX_UART3_PHYS_BASE + 0x0fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
.irq = { IRQ_EP93XX_UART3, NO_IRQ },
|
|
.periphid = 0x00041010,
|
|
};
|
|
|
|
|
|
static struct platform_device ep93xx_rtc_device = {
|
|
.name = "ep93xx-rtc",
|
|
.id = -1,
|
|
.num_resources = 0,
|
|
};
|
|
|
|
|
|
static struct resource ep93xx_ohci_resources[] = {
|
|
[0] = {
|
|
.start = EP93XX_USB_PHYS_BASE,
|
|
.end = EP93XX_USB_PHYS_BASE + 0x0fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_EP93XX_USB,
|
|
.end = IRQ_EP93XX_USB,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device ep93xx_ohci_device = {
|
|
.name = "ep93xx-ohci",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = (void *)0xffffffff,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
.num_resources = ARRAY_SIZE(ep93xx_ohci_resources),
|
|
.resource = ep93xx_ohci_resources,
|
|
};
|
|
|
|
|
|
void __init ep93xx_init_devices(void)
|
|
{
|
|
unsigned int v;
|
|
|
|
/*
|
|
* Disallow access to MaverickCrunch initially.
|
|
*/
|
|
v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
|
|
v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
|
|
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
|
|
__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
|
|
|
|
amba_device_register(&uart1_device, &iomem_resource);
|
|
amba_device_register(&uart2_device, &iomem_resource);
|
|
amba_device_register(&uart3_device, &iomem_resource);
|
|
|
|
platform_device_register(&ep93xx_rtc_device);
|
|
platform_device_register(&ep93xx_ohci_device);
|
|
}
|