forked from Minki/linux
669d32a293
This patch fixes 2 bugs in the USB-IrDA code. The first one is a buffer overrun in the RX path. We are now using IRDA_SKB_MAX_MTU when initializing the Rx URB. The second one is a potential stack recursion when unplugging the USB dongle. It seems that first we get the Rx URB with a generic error code, and after a while the Rx URB comes again with a "disconnect" error code. Since we are resubmitting the Rx URB immediately after receiving the first error one, we might enter an endless loop. When getting an error Rx URB, the patch defers the Rx URB resubmitting so that it gives us a chance to catch the disconnect one, in case the dongle has juts been unplugged. Tested against 2.6.16-rc2. Patch from Jean Tourrilhes Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
163 lines
6.2 KiB
C
163 lines
6.2 KiB
C
/*****************************************************************************
|
|
*
|
|
* Filename: irda-usb.h
|
|
* Version: 0.9b
|
|
* Description: IrDA-USB Driver
|
|
* Status: Experimental
|
|
* Author: Dag Brattli <dag@brattli.net>
|
|
*
|
|
* Copyright (C) 2001, Roman Weissgaerber <weissg@vienna.at>
|
|
* Copyright (C) 2000, Dag Brattli <dag@brattli.net>
|
|
* Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#include <linux/time.h>
|
|
|
|
#include <net/irda/irda.h>
|
|
#include <net/irda/irda_device.h> /* struct irlap_cb */
|
|
|
|
#define RX_COPY_THRESHOLD 200
|
|
#define IRDA_USB_MAX_MTU 2051
|
|
#define IRDA_USB_SPEED_MTU 64 /* Weird, but work like this */
|
|
|
|
/* Maximum number of active URB on the Rx path
|
|
* This is the amount of buffers the we keep between the USB harware and the
|
|
* IrDA stack.
|
|
*
|
|
* Note : the network layer does also queue the packets between us and the
|
|
* IrDA stack, and is actually pretty fast and efficient in doing that.
|
|
* Therefore, we don't need to have a large number of URBs, and we can
|
|
* perfectly live happy with only one. We certainly don't need to keep the
|
|
* full IrTTP window around here...
|
|
* I repeat for those who have trouble to understand : 1 URB is plenty
|
|
* good enough to handle back-to-back (brickwalled) frames. I tried it,
|
|
* it works (it's the hardware that has trouble doing it).
|
|
*
|
|
* Having 2 URBs would allow the USB stack to process one URB while we take
|
|
* care of the other and then swap the URBs...
|
|
* On the other hand, increasing the number of URB will have penalities
|
|
* in term of latency and will interact with the link management in IrLAP...
|
|
* Jean II */
|
|
#define IU_MAX_ACTIVE_RX_URBS 1 /* Don't touch !!! */
|
|
|
|
/* When a Rx URB is passed back to us, we can't reuse it immediately,
|
|
* because it may still be referenced by the USB layer. Therefore we
|
|
* need to keep one extra URB in the Rx path.
|
|
* Jean II */
|
|
#define IU_MAX_RX_URBS (IU_MAX_ACTIVE_RX_URBS + 1)
|
|
|
|
/* Various ugly stuff to try to workaround generic problems */
|
|
/* Send speed command in case of timeout, just for trying to get things sane */
|
|
#define IU_BUG_KICK_TIMEOUT
|
|
/* Show the USB class descriptor */
|
|
#undef IU_DUMP_CLASS_DESC
|
|
/* Assume a minimum round trip latency for USB transfer (in us)...
|
|
* USB transfer are done in the next USB slot if there is no traffic
|
|
* (1/19 msec) and is done at 12 Mb/s :
|
|
* Waiting for slot + tx = (53us + 16us) * 2 = 137us minimum.
|
|
* Rx notification will only be done at the end of the USB frame period :
|
|
* OHCI : frame period = 1ms
|
|
* UHCI : frame period = 1ms, but notification can take 2 or 3 ms :-(
|
|
* EHCI : frame period = 125us */
|
|
#define IU_USB_MIN_RTT 500 /* This should be safe in most cases */
|
|
|
|
/* Inbound header */
|
|
#define MEDIA_BUSY 0x80
|
|
|
|
#define SPEED_2400 0x01
|
|
#define SPEED_9600 0x02
|
|
#define SPEED_19200 0x03
|
|
#define SPEED_38400 0x04
|
|
#define SPEED_57600 0x05
|
|
#define SPEED_115200 0x06
|
|
#define SPEED_576000 0x07
|
|
#define SPEED_1152000 0x08
|
|
#define SPEED_4000000 0x09
|
|
|
|
/* Basic capabilities */
|
|
#define IUC_DEFAULT 0x00 /* Basic device compliant with 1.0 spec */
|
|
/* Main bugs */
|
|
#define IUC_SPEED_BUG 0x01 /* Device doesn't set speed after the frame */
|
|
#define IUC_NO_WINDOW 0x02 /* Device doesn't behave with big Rx window */
|
|
#define IUC_NO_TURN 0x04 /* Device doesn't do turnaround by itself */
|
|
/* Not currently used */
|
|
#define IUC_SIR_ONLY 0x08 /* Device doesn't behave at FIR speeds */
|
|
#define IUC_SMALL_PKT 0x10 /* Device doesn't behave with big Rx packets */
|
|
#define IUC_MAX_WINDOW 0x20 /* Device underestimate the Rx window */
|
|
#define IUC_MAX_XBOFS 0x40 /* Device need more xbofs than advertised */
|
|
|
|
/* USB class definitions */
|
|
#define USB_IRDA_HEADER 0x01
|
|
#define USB_CLASS_IRDA 0x02 /* USB_CLASS_APP_SPEC subclass */
|
|
#define USB_DT_IRDA 0x21
|
|
|
|
struct irda_class_desc {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
__u16 bcdSpecRevision;
|
|
__u8 bmDataSize;
|
|
__u8 bmWindowSize;
|
|
__u8 bmMinTurnaroundTime;
|
|
__u16 wBaudRate;
|
|
__u8 bmAdditionalBOFs;
|
|
__u8 bIrdaRateSniff;
|
|
__u8 bMaxUnicastList;
|
|
} __attribute__ ((packed));
|
|
|
|
/* class specific interface request to get the IrDA-USB class descriptor
|
|
* (6.2.5, USB-IrDA class spec 1.0) */
|
|
|
|
#define IU_REQ_GET_CLASS_DESC 0x06
|
|
|
|
struct irda_usb_cb {
|
|
struct irda_class_desc *irda_desc;
|
|
struct usb_device *usbdev; /* init: probe_irda */
|
|
struct usb_interface *usbintf; /* init: probe_irda */
|
|
int netopen; /* Device is active for network */
|
|
int present; /* Device is present on the bus */
|
|
__u32 capability; /* Capability of the hardware */
|
|
__u8 bulk_in_ep; /* Rx Endpoint assignments */
|
|
__u8 bulk_out_ep; /* Tx Endpoint assignments */
|
|
__u16 bulk_out_mtu; /* Max Tx packet size in bytes */
|
|
__u8 bulk_int_ep; /* Interrupt Endpoint assignments */
|
|
|
|
struct urb *rx_urb[IU_MAX_RX_URBS]; /* URBs used to receive data frames */
|
|
struct urb *idle_rx_urb; /* Pointer to idle URB in Rx path */
|
|
struct urb *tx_urb; /* URB used to send data frames */
|
|
struct urb *speed_urb; /* URB used to send speed commands */
|
|
|
|
struct net_device *netdev; /* Yes! we are some kind of netdev. */
|
|
struct net_device_stats stats;
|
|
struct irlap_cb *irlap; /* The link layer we are binded to */
|
|
struct qos_info qos;
|
|
char *speed_buff; /* Buffer for speed changes */
|
|
|
|
struct timeval stamp;
|
|
struct timeval now;
|
|
|
|
spinlock_t lock; /* For serializing Tx operations */
|
|
|
|
__u16 xbofs; /* Current xbofs setting */
|
|
__s16 new_xbofs; /* xbofs we need to set */
|
|
__u32 speed; /* Current speed */
|
|
__s32 new_speed; /* speed we need to set */
|
|
|
|
struct timer_list rx_defer_timer; /* Wait for Rx error to clear */
|
|
};
|
|
|