Len Brown 2194324d8b ACPI idle: permit sparse C-state sub-state numbers ...

Linux uses CPUID.MWAIT.EDX to validate the C-states
reported by ACPI, silently discarding states which
are not supported by the HW.

This test is too restrictive, as some HW now uses
sparse sub-state numbering, so the sub-state number
may be higher than the number of sub-states...

Also, rather than silently ignoring an invalid state,
we should complain about a firmware bug.

In practice...

Bay Trail systems originally supported C6-no-shrink as
MWAIT sub-state 0x58, and in CPUID.MWAIT.EDX 0x03000000
indicated that there were 3 MWAIT-C6 sub-states.
So acpi_idle would discard that C-state because 8 >= 3.

Upon discovering this issue, the ucode was updated so that
C6-no-shrink was also exported as 0x51, and the BIOS was
updated to match.  However, systems shipped with 0x58,
will never get a BIOS update, and this patch allows
Linux to see C6-no-shrink on early Bay Trail.

Signed-off-by: Len Brown <len.brown@intel.com>

2014-02-19 17:33:18 -05:00

5.0 KiB

Raw Blame History

View Raw