forked from Minki/linux
34f32c9701
Now that the musb build fixes for DaVinci got merged (RC3?), kick in the other bits needed to get it finally *working* in mainline: - Use clk_enable()/clk_disable() ... the "always enable USB clocks" code this originally relied on has since been removed. - Initialize the USB device only after the relevant I2C GPIOs are available, so the host side can properly enable VBUS. - Tweak init sequencing to cope with mainline's relatively late init of the I2C system bus for power switches, transceivers, and so on. Sanity tested on DM6664 EVM for host and peripheral modes; that system won't boot with CONFIG_PM enabled, so OTG can't yet be tested. Also verified on OMAP3. (Unrelated: correct the MODULE_PARM_DESC spelling of musb_debug.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <me@felipebalbi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
96 lines
2.0 KiB
C
96 lines
2.0 KiB
C
/*
|
|
* USB
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <linux/usb/musb.h>
|
|
#include <linux/usb/otg.h>
|
|
|
|
#include <mach/common.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/irqs.h>
|
|
|
|
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
|
|
static struct musb_hdrc_eps_bits musb_eps[] = {
|
|
{ "ep1_tx", 8, },
|
|
{ "ep1_rx", 8, },
|
|
{ "ep2_tx", 8, },
|
|
{ "ep2_rx", 8, },
|
|
{ "ep3_tx", 5, },
|
|
{ "ep3_rx", 5, },
|
|
{ "ep4_tx", 5, },
|
|
{ "ep4_rx", 5, },
|
|
};
|
|
|
|
static struct musb_hdrc_config musb_config = {
|
|
.multipoint = true,
|
|
.dyn_fifo = true,
|
|
.soft_con = true,
|
|
.dma = true,
|
|
|
|
.num_eps = 5,
|
|
.dma_channels = 8,
|
|
.ram_bits = 10,
|
|
.eps_bits = musb_eps,
|
|
};
|
|
|
|
static struct musb_hdrc_platform_data usb_data = {
|
|
#if defined(CONFIG_USB_MUSB_OTG)
|
|
/* OTG requires a Mini-AB connector */
|
|
.mode = MUSB_OTG,
|
|
#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
|
|
.mode = MUSB_PERIPHERAL,
|
|
#elif defined(CONFIG_USB_MUSB_HOST)
|
|
.mode = MUSB_HOST,
|
|
#endif
|
|
.clock = "usb",
|
|
.config = &musb_config,
|
|
};
|
|
|
|
static struct resource usb_resources[] = {
|
|
{
|
|
/* physical address */
|
|
.start = DAVINCI_USB_OTG_BASE,
|
|
.end = DAVINCI_USB_OTG_BASE + 0x5ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_USBINT,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static u64 usb_dmamask = DMA_32BIT_MASK;
|
|
|
|
static struct platform_device usb_dev = {
|
|
.name = "musb_hdrc",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &usb_data,
|
|
.dma_mask = &usb_dmamask,
|
|
.coherent_dma_mask = DMA_32BIT_MASK,
|
|
},
|
|
.resource = usb_resources,
|
|
.num_resources = ARRAY_SIZE(usb_resources),
|
|
};
|
|
|
|
void __init setup_usb(unsigned mA, unsigned potpgt_msec)
|
|
{
|
|
usb_data.power = mA / 2;
|
|
usb_data.potpgt = potpgt_msec / 2;
|
|
platform_device_register(&usb_dev);
|
|
}
|
|
|
|
#else
|
|
|
|
void __init setup_usb(unsigned mA, unsigned potpgt_msec)
|
|
{
|
|
}
|
|
|
|
#endif /* CONFIG_USB_MUSB_HDRC */
|
|
|