forked from Minki/linux
ab49ae0f20
The querycap ioctl returned an incorrect version number and incorrect capabilities (mixing up vbi and video caps). The reason for that was that video nodes could do vbi activities: that should be separated between the vbi and video nodes. There were also a few minor problems with dbg_g/s_register that have been resolved. The mxb/saa7146 driver now passes the v4l2_compliance tests. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
476 lines
18 KiB
C
476 lines
18 KiB
C
#ifndef __SAA7146__
|
|
#define __SAA7146__
|
|
|
|
#include <linux/delay.h> /* for delay-stuff */
|
|
#include <linux/slab.h> /* for kmalloc/kfree */
|
|
#include <linux/pci.h> /* for pci-config-stuff, vendor ids etc. */
|
|
#include <linux/init.h> /* for "__init" */
|
|
#include <linux/interrupt.h> /* for IMMEDIATE_BH */
|
|
#include <linux/kmod.h> /* for kernel module loader */
|
|
#include <linux/i2c.h> /* for i2c subsystem */
|
|
#include <asm/io.h> /* for accessing devices */
|
|
#include <linux/stringify.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
|
|
#include <linux/vmalloc.h> /* for vmalloc() */
|
|
#include <linux/mm.h> /* for vmalloc_to_page() */
|
|
|
|
#define saa7146_write(sxy,adr,dat) writel((dat),(sxy->mem+(adr)))
|
|
#define saa7146_read(sxy,adr) readl(sxy->mem+(adr))
|
|
|
|
extern unsigned int saa7146_debug;
|
|
|
|
#ifndef DEBUG_VARIABLE
|
|
#define DEBUG_VARIABLE saa7146_debug
|
|
#endif
|
|
|
|
#define ERR(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
|
|
|
|
#define _DBG(mask, fmt, ...) \
|
|
do { \
|
|
if (DEBUG_VARIABLE & mask) \
|
|
pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__); \
|
|
} while (0)
|
|
|
|
/* simple debug messages */
|
|
#define DEB_S(fmt, ...) _DBG(0x01, fmt, ##__VA_ARGS__)
|
|
/* more detailed debug messages */
|
|
#define DEB_D(fmt, ...) _DBG(0x02, fmt, ##__VA_ARGS__)
|
|
/* print enter and exit of functions */
|
|
#define DEB_EE(fmt, ...) _DBG(0x04, fmt, ##__VA_ARGS__)
|
|
/* i2c debug messages */
|
|
#define DEB_I2C(fmt, ...) _DBG(0x08, fmt, ##__VA_ARGS__)
|
|
/* vbi debug messages */
|
|
#define DEB_VBI(fmt, ...) _DBG(0x10, fmt, ##__VA_ARGS__)
|
|
/* interrupt debug messages */
|
|
#define DEB_INT(fmt, ...) _DBG(0x20, fmt, ##__VA_ARGS__)
|
|
/* capture debug messages */
|
|
#define DEB_CAP(fmt, ...) _DBG(0x40, fmt, ##__VA_ARGS__)
|
|
|
|
#define SAA7146_ISR_CLEAR(x,y) \
|
|
saa7146_write(x, ISR, (y));
|
|
|
|
struct module;
|
|
|
|
struct saa7146_dev;
|
|
struct saa7146_extension;
|
|
struct saa7146_vv;
|
|
|
|
/* saa7146 page table */
|
|
struct saa7146_pgtable {
|
|
unsigned int size;
|
|
__le32 *cpu;
|
|
dma_addr_t dma;
|
|
/* used for offsets for u,v planes for planar capture modes */
|
|
unsigned long offset;
|
|
/* used for custom pagetables (used for example by budget dvb cards) */
|
|
struct scatterlist *slist;
|
|
int nents;
|
|
};
|
|
|
|
struct saa7146_pci_extension_data {
|
|
struct saa7146_extension *ext;
|
|
void *ext_priv; /* most likely a name string */
|
|
};
|
|
|
|
#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device) \
|
|
{ \
|
|
.vendor = PCI_VENDOR_ID_PHILIPS, \
|
|
.device = PCI_DEVICE_ID_PHILIPS_SAA7146, \
|
|
.subvendor = x_vendor, \
|
|
.subdevice = x_device, \
|
|
.driver_data = (unsigned long)& x_var, \
|
|
}
|
|
|
|
struct saa7146_extension
|
|
{
|
|
char name[32]; /* name of the device */
|
|
#define SAA7146_USE_I2C_IRQ 0x1
|
|
#define SAA7146_I2C_SHORT_DELAY 0x2
|
|
int flags;
|
|
|
|
/* pairs of subvendor and subdevice ids for
|
|
supported devices, last entry 0xffff, 0xfff */
|
|
struct module *module;
|
|
struct pci_driver driver;
|
|
struct pci_device_id *pci_tbl;
|
|
|
|
/* extension functions */
|
|
int (*probe)(struct saa7146_dev *);
|
|
int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *);
|
|
int (*detach)(struct saa7146_dev*);
|
|
|
|
u32 irq_mask; /* mask to indicate, which irq-events are handled by the extension */
|
|
void (*irq_func)(struct saa7146_dev*, u32* irq_mask);
|
|
};
|
|
|
|
struct saa7146_dma
|
|
{
|
|
dma_addr_t dma_handle;
|
|
__le32 *cpu_addr;
|
|
};
|
|
|
|
struct saa7146_dev
|
|
{
|
|
struct module *module;
|
|
|
|
struct list_head item;
|
|
|
|
struct v4l2_device v4l2_dev;
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
|
|
/* different device locks */
|
|
spinlock_t slock;
|
|
struct mutex v4l2_lock;
|
|
|
|
unsigned char __iomem *mem; /* pointer to mapped IO memory */
|
|
u32 revision; /* chip revision; needed for bug-workarounds*/
|
|
|
|
/* pci-device & irq stuff*/
|
|
char name[32];
|
|
struct pci_dev *pci;
|
|
u32 int_todo;
|
|
spinlock_t int_slock;
|
|
|
|
/* extension handling */
|
|
struct saa7146_extension *ext; /* indicates if handled by extension */
|
|
void *ext_priv; /* pointer for extension private use (most likely some private data) */
|
|
struct saa7146_ext_vv *ext_vv_data;
|
|
|
|
/* per device video/vbi informations (if available) */
|
|
struct saa7146_vv *vv_data;
|
|
void (*vv_callback)(struct saa7146_dev *dev, unsigned long status);
|
|
|
|
/* i2c-stuff */
|
|
struct mutex i2c_lock;
|
|
|
|
u32 i2c_bitrate;
|
|
struct saa7146_dma d_i2c; /* pointer to i2c memory */
|
|
wait_queue_head_t i2c_wq;
|
|
int i2c_op;
|
|
|
|
/* memories */
|
|
struct saa7146_dma d_rps0;
|
|
struct saa7146_dma d_rps1;
|
|
};
|
|
|
|
static inline struct saa7146_dev *to_saa7146_dev(struct v4l2_device *v4l2_dev)
|
|
{
|
|
return container_of(v4l2_dev, struct saa7146_dev, v4l2_dev);
|
|
}
|
|
|
|
/* from saa7146_i2c.c */
|
|
int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate);
|
|
|
|
/* from saa7146_core.c */
|
|
extern struct list_head saa7146_devices;
|
|
extern struct mutex saa7146_devices_lock;
|
|
int saa7146_register_extension(struct saa7146_extension*);
|
|
int saa7146_unregister_extension(struct saa7146_extension*);
|
|
struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc);
|
|
int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
|
|
void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
|
|
int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
|
|
void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt);
|
|
void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt);
|
|
void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data);
|
|
int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop);
|
|
|
|
/* some memory sizes */
|
|
#define SAA7146_I2C_MEM ( 1*PAGE_SIZE)
|
|
#define SAA7146_RPS_MEM ( 1*PAGE_SIZE)
|
|
|
|
/* some i2c constants */
|
|
#define SAA7146_I2C_TIMEOUT 100 /* i2c-timeout-value in ms */
|
|
#define SAA7146_I2C_RETRIES 3 /* how many times shall we retry an i2c-operation? */
|
|
#define SAA7146_I2C_DELAY 5 /* time we wait after certain i2c-operations */
|
|
|
|
/* unsorted defines */
|
|
#define ME1 0x0000000800
|
|
#define PV1 0x0000000008
|
|
|
|
/* gpio defines */
|
|
#define SAA7146_GPIO_INPUT 0x00
|
|
#define SAA7146_GPIO_IRQHI 0x10
|
|
#define SAA7146_GPIO_IRQLO 0x20
|
|
#define SAA7146_GPIO_IRQHL 0x30
|
|
#define SAA7146_GPIO_OUTLO 0x40
|
|
#define SAA7146_GPIO_OUTHI 0x50
|
|
|
|
/* debi defines */
|
|
#define DEBINOSWAP 0x000e0000
|
|
|
|
/* define for the register programming sequencer (rps) */
|
|
#define CMD_NOP 0x00000000 /* No operation */
|
|
#define CMD_CLR_EVENT 0x00000000 /* Clear event */
|
|
#define CMD_SET_EVENT 0x10000000 /* Set signal event */
|
|
#define CMD_PAUSE 0x20000000 /* Pause */
|
|
#define CMD_CHECK_LATE 0x30000000 /* Check late */
|
|
#define CMD_UPLOAD 0x40000000 /* Upload */
|
|
#define CMD_STOP 0x50000000 /* Stop */
|
|
#define CMD_INTERRUPT 0x60000000 /* Interrupt */
|
|
#define CMD_JUMP 0x80000000 /* Jump */
|
|
#define CMD_WR_REG 0x90000000 /* Write (load) register */
|
|
#define CMD_RD_REG 0xa0000000 /* Read (store) register */
|
|
#define CMD_WR_REG_MASK 0xc0000000 /* Write register with mask */
|
|
|
|
#define CMD_OAN MASK_27
|
|
#define CMD_INV MASK_26
|
|
#define CMD_SIG4 MASK_25
|
|
#define CMD_SIG3 MASK_24
|
|
#define CMD_SIG2 MASK_23
|
|
#define CMD_SIG1 MASK_22
|
|
#define CMD_SIG0 MASK_21
|
|
#define CMD_O_FID_B MASK_14
|
|
#define CMD_E_FID_B MASK_13
|
|
#define CMD_O_FID_A MASK_12
|
|
#define CMD_E_FID_A MASK_11
|
|
|
|
/* some events and command modifiers for rps1 squarewave generator */
|
|
#define EVT_HS (1<<15) // Source Line Threshold reached
|
|
#define EVT_VBI_B (1<<9) // VSYNC Event
|
|
#define RPS_OAN (1<<27) // 1: OR events, 0: AND events
|
|
#define RPS_INV (1<<26) // Invert (compound) event
|
|
#define GPIO3_MSK 0xFF000000 // GPIO #3 control bits
|
|
|
|
/* Bit mask constants */
|
|
#define MASK_00 0x00000001 /* Mask value for bit 0 */
|
|
#define MASK_01 0x00000002 /* Mask value for bit 1 */
|
|
#define MASK_02 0x00000004 /* Mask value for bit 2 */
|
|
#define MASK_03 0x00000008 /* Mask value for bit 3 */
|
|
#define MASK_04 0x00000010 /* Mask value for bit 4 */
|
|
#define MASK_05 0x00000020 /* Mask value for bit 5 */
|
|
#define MASK_06 0x00000040 /* Mask value for bit 6 */
|
|
#define MASK_07 0x00000080 /* Mask value for bit 7 */
|
|
#define MASK_08 0x00000100 /* Mask value for bit 8 */
|
|
#define MASK_09 0x00000200 /* Mask value for bit 9 */
|
|
#define MASK_10 0x00000400 /* Mask value for bit 10 */
|
|
#define MASK_11 0x00000800 /* Mask value for bit 11 */
|
|
#define MASK_12 0x00001000 /* Mask value for bit 12 */
|
|
#define MASK_13 0x00002000 /* Mask value for bit 13 */
|
|
#define MASK_14 0x00004000 /* Mask value for bit 14 */
|
|
#define MASK_15 0x00008000 /* Mask value for bit 15 */
|
|
#define MASK_16 0x00010000 /* Mask value for bit 16 */
|
|
#define MASK_17 0x00020000 /* Mask value for bit 17 */
|
|
#define MASK_18 0x00040000 /* Mask value for bit 18 */
|
|
#define MASK_19 0x00080000 /* Mask value for bit 19 */
|
|
#define MASK_20 0x00100000 /* Mask value for bit 20 */
|
|
#define MASK_21 0x00200000 /* Mask value for bit 21 */
|
|
#define MASK_22 0x00400000 /* Mask value for bit 22 */
|
|
#define MASK_23 0x00800000 /* Mask value for bit 23 */
|
|
#define MASK_24 0x01000000 /* Mask value for bit 24 */
|
|
#define MASK_25 0x02000000 /* Mask value for bit 25 */
|
|
#define MASK_26 0x04000000 /* Mask value for bit 26 */
|
|
#define MASK_27 0x08000000 /* Mask value for bit 27 */
|
|
#define MASK_28 0x10000000 /* Mask value for bit 28 */
|
|
#define MASK_29 0x20000000 /* Mask value for bit 29 */
|
|
#define MASK_30 0x40000000 /* Mask value for bit 30 */
|
|
#define MASK_31 0x80000000 /* Mask value for bit 31 */
|
|
|
|
#define MASK_B0 0x000000ff /* Mask value for byte 0 */
|
|
#define MASK_B1 0x0000ff00 /* Mask value for byte 1 */
|
|
#define MASK_B2 0x00ff0000 /* Mask value for byte 2 */
|
|
#define MASK_B3 0xff000000 /* Mask value for byte 3 */
|
|
|
|
#define MASK_W0 0x0000ffff /* Mask value for word 0 */
|
|
#define MASK_W1 0xffff0000 /* Mask value for word 1 */
|
|
|
|
#define MASK_PA 0xfffffffc /* Mask value for physical address */
|
|
#define MASK_PR 0xfffffffe /* Mask value for protection register */
|
|
#define MASK_ER 0xffffffff /* Mask value for the entire register */
|
|
|
|
#define MASK_NONE 0x00000000 /* No mask */
|
|
|
|
/* register aliases */
|
|
#define BASE_ODD1 0x00 /* Video DMA 1 registers */
|
|
#define BASE_EVEN1 0x04
|
|
#define PROT_ADDR1 0x08
|
|
#define PITCH1 0x0C
|
|
#define BASE_PAGE1 0x10 /* Video DMA 1 base page */
|
|
#define NUM_LINE_BYTE1 0x14
|
|
|
|
#define BASE_ODD2 0x18 /* Video DMA 2 registers */
|
|
#define BASE_EVEN2 0x1C
|
|
#define PROT_ADDR2 0x20
|
|
#define PITCH2 0x24
|
|
#define BASE_PAGE2 0x28 /* Video DMA 2 base page */
|
|
#define NUM_LINE_BYTE2 0x2C
|
|
|
|
#define BASE_ODD3 0x30 /* Video DMA 3 registers */
|
|
#define BASE_EVEN3 0x34
|
|
#define PROT_ADDR3 0x38
|
|
#define PITCH3 0x3C
|
|
#define BASE_PAGE3 0x40 /* Video DMA 3 base page */
|
|
#define NUM_LINE_BYTE3 0x44
|
|
|
|
#define PCI_BT_V1 0x48 /* Video/FIFO 1 */
|
|
#define PCI_BT_V2 0x49 /* Video/FIFO 2 */
|
|
#define PCI_BT_V3 0x4A /* Video/FIFO 3 */
|
|
#define PCI_BT_DEBI 0x4B /* DEBI */
|
|
#define PCI_BT_A 0x4C /* Audio */
|
|
|
|
#define DD1_INIT 0x50 /* Init setting of DD1 interface */
|
|
|
|
#define DD1_STREAM_B 0x54 /* DD1 B video data stream handling */
|
|
#define DD1_STREAM_A 0x56 /* DD1 A video data stream handling */
|
|
|
|
#define BRS_CTRL 0x58 /* BRS control register */
|
|
#define HPS_CTRL 0x5C /* HPS control register */
|
|
#define HPS_V_SCALE 0x60 /* HPS vertical scale */
|
|
#define HPS_V_GAIN 0x64 /* HPS vertical ACL and gain */
|
|
#define HPS_H_PRESCALE 0x68 /* HPS horizontal prescale */
|
|
#define HPS_H_SCALE 0x6C /* HPS horizontal scale */
|
|
#define BCS_CTRL 0x70 /* BCS control */
|
|
#define CHROMA_KEY_RANGE 0x74
|
|
#define CLIP_FORMAT_CTRL 0x78 /* HPS outputs formats & clipping */
|
|
|
|
#define DEBI_CONFIG 0x7C
|
|
#define DEBI_COMMAND 0x80
|
|
#define DEBI_PAGE 0x84
|
|
#define DEBI_AD 0x88
|
|
|
|
#define I2C_TRANSFER 0x8C
|
|
#define I2C_STATUS 0x90
|
|
|
|
#define BASE_A1_IN 0x94 /* Audio 1 input DMA */
|
|
#define PROT_A1_IN 0x98
|
|
#define PAGE_A1_IN 0x9C
|
|
|
|
#define BASE_A1_OUT 0xA0 /* Audio 1 output DMA */
|
|
#define PROT_A1_OUT 0xA4
|
|
#define PAGE_A1_OUT 0xA8
|
|
|
|
#define BASE_A2_IN 0xAC /* Audio 2 input DMA */
|
|
#define PROT_A2_IN 0xB0
|
|
#define PAGE_A2_IN 0xB4
|
|
|
|
#define BASE_A2_OUT 0xB8 /* Audio 2 output DMA */
|
|
#define PROT_A2_OUT 0xBC
|
|
#define PAGE_A2_OUT 0xC0
|
|
|
|
#define RPS_PAGE0 0xC4 /* RPS task 0 page register */
|
|
#define RPS_PAGE1 0xC8 /* RPS task 1 page register */
|
|
|
|
#define RPS_THRESH0 0xCC /* HBI threshold for task 0 */
|
|
#define RPS_THRESH1 0xD0 /* HBI threshold for task 1 */
|
|
|
|
#define RPS_TOV0 0xD4 /* RPS timeout for task 0 */
|
|
#define RPS_TOV1 0xD8 /* RPS timeout for task 1 */
|
|
|
|
#define IER 0xDC /* Interrupt enable register */
|
|
|
|
#define GPIO_CTRL 0xE0 /* GPIO 0-3 register */
|
|
|
|
#define EC1SSR 0xE4 /* Event cnt set 1 source select */
|
|
#define EC2SSR 0xE8 /* Event cnt set 2 source select */
|
|
#define ECT1R 0xEC /* Event cnt set 1 thresholds */
|
|
#define ECT2R 0xF0 /* Event cnt set 2 thresholds */
|
|
|
|
#define ACON1 0xF4
|
|
#define ACON2 0xF8
|
|
|
|
#define MC1 0xFC /* Main control register 1 */
|
|
#define MC2 0x100 /* Main control register 2 */
|
|
|
|
#define RPS_ADDR0 0x104 /* RPS task 0 address register */
|
|
#define RPS_ADDR1 0x108 /* RPS task 1 address register */
|
|
|
|
#define ISR 0x10C /* Interrupt status register */
|
|
#define PSR 0x110 /* Primary status register */
|
|
#define SSR 0x114 /* Secondary status register */
|
|
|
|
#define EC1R 0x118 /* Event counter set 1 register */
|
|
#define EC2R 0x11C /* Event counter set 2 register */
|
|
|
|
#define PCI_VDP1 0x120 /* Video DMA pointer of FIFO 1 */
|
|
#define PCI_VDP2 0x124 /* Video DMA pointer of FIFO 2 */
|
|
#define PCI_VDP3 0x128 /* Video DMA pointer of FIFO 3 */
|
|
#define PCI_ADP1 0x12C /* Audio DMA pointer of audio out 1 */
|
|
#define PCI_ADP2 0x130 /* Audio DMA pointer of audio in 1 */
|
|
#define PCI_ADP3 0x134 /* Audio DMA pointer of audio out 2 */
|
|
#define PCI_ADP4 0x138 /* Audio DMA pointer of audio in 2 */
|
|
#define PCI_DMA_DDP 0x13C /* DEBI DMA pointer */
|
|
|
|
#define LEVEL_REP 0x140,
|
|
#define A_TIME_SLOT1 0x180, /* from 180 - 1BC */
|
|
#define A_TIME_SLOT2 0x1C0, /* from 1C0 - 1FC */
|
|
|
|
/* isr masks */
|
|
#define SPCI_PPEF 0x80000000 /* PCI parity error */
|
|
#define SPCI_PABO 0x40000000 /* PCI access error (target or master abort) */
|
|
#define SPCI_PPED 0x20000000 /* PCI parity error on 'real time data' */
|
|
#define SPCI_RPS_I1 0x10000000 /* Interrupt issued by RPS1 */
|
|
#define SPCI_RPS_I0 0x08000000 /* Interrupt issued by RPS0 */
|
|
#define SPCI_RPS_LATE1 0x04000000 /* RPS task 1 is late */
|
|
#define SPCI_RPS_LATE0 0x02000000 /* RPS task 0 is late */
|
|
#define SPCI_RPS_E1 0x01000000 /* RPS error from task 1 */
|
|
#define SPCI_RPS_E0 0x00800000 /* RPS error from task 0 */
|
|
#define SPCI_RPS_TO1 0x00400000 /* RPS timeout task 1 */
|
|
#define SPCI_RPS_TO0 0x00200000 /* RPS timeout task 0 */
|
|
#define SPCI_UPLD 0x00100000 /* RPS in upload */
|
|
#define SPCI_DEBI_S 0x00080000 /* DEBI status */
|
|
#define SPCI_DEBI_E 0x00040000 /* DEBI error */
|
|
#define SPCI_IIC_S 0x00020000 /* I2C status */
|
|
#define SPCI_IIC_E 0x00010000 /* I2C error */
|
|
#define SPCI_A2_IN 0x00008000 /* Audio 2 input DMA protection / limit */
|
|
#define SPCI_A2_OUT 0x00004000 /* Audio 2 output DMA protection / limit */
|
|
#define SPCI_A1_IN 0x00002000 /* Audio 1 input DMA protection / limit */
|
|
#define SPCI_A1_OUT 0x00001000 /* Audio 1 output DMA protection / limit */
|
|
#define SPCI_AFOU 0x00000800 /* Audio FIFO over- / underflow */
|
|
#define SPCI_V_PE 0x00000400 /* Video protection address */
|
|
#define SPCI_VFOU 0x00000200 /* Video FIFO over- / underflow */
|
|
#define SPCI_FIDA 0x00000100 /* Field ID video port A */
|
|
#define SPCI_FIDB 0x00000080 /* Field ID video port B */
|
|
#define SPCI_PIN3 0x00000040 /* GPIO pin 3 */
|
|
#define SPCI_PIN2 0x00000020 /* GPIO pin 2 */
|
|
#define SPCI_PIN1 0x00000010 /* GPIO pin 1 */
|
|
#define SPCI_PIN0 0x00000008 /* GPIO pin 0 */
|
|
#define SPCI_ECS 0x00000004 /* Event counter 1, 2, 4, 5 */
|
|
#define SPCI_EC3S 0x00000002 /* Event counter 3 */
|
|
#define SPCI_EC0S 0x00000001 /* Event counter 0 */
|
|
|
|
/* i2c */
|
|
#define SAA7146_I2C_ABORT (1<<7)
|
|
#define SAA7146_I2C_SPERR (1<<6)
|
|
#define SAA7146_I2C_APERR (1<<5)
|
|
#define SAA7146_I2C_DTERR (1<<4)
|
|
#define SAA7146_I2C_DRERR (1<<3)
|
|
#define SAA7146_I2C_AL (1<<2)
|
|
#define SAA7146_I2C_ERR (1<<1)
|
|
#define SAA7146_I2C_BUSY (1<<0)
|
|
|
|
#define SAA7146_I2C_START (0x3)
|
|
#define SAA7146_I2C_CONT (0x2)
|
|
#define SAA7146_I2C_STOP (0x1)
|
|
#define SAA7146_I2C_NOP (0x0)
|
|
|
|
#define SAA7146_I2C_BUS_BIT_RATE_6400 (0x500)
|
|
#define SAA7146_I2C_BUS_BIT_RATE_3200 (0x100)
|
|
#define SAA7146_I2C_BUS_BIT_RATE_480 (0x400)
|
|
#define SAA7146_I2C_BUS_BIT_RATE_320 (0x600)
|
|
#define SAA7146_I2C_BUS_BIT_RATE_240 (0x700)
|
|
#define SAA7146_I2C_BUS_BIT_RATE_120 (0x000)
|
|
#define SAA7146_I2C_BUS_BIT_RATE_80 (0x200)
|
|
#define SAA7146_I2C_BUS_BIT_RATE_60 (0x300)
|
|
|
|
static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y)
|
|
{
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&x->int_slock, flags);
|
|
saa7146_write(x, IER, saa7146_read(x, IER) & ~y);
|
|
spin_unlock_irqrestore(&x->int_slock, flags);
|
|
}
|
|
|
|
static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y)
|
|
{
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&x->int_slock, flags);
|
|
saa7146_write(x, IER, saa7146_read(x, IER) | y);
|
|
spin_unlock_irqrestore(&x->int_slock, flags);
|
|
}
|
|
|
|
#endif
|