Tobias Klauser e96fabd879 tty: serial: altera_uart: Handle pdev->id == -1 in altera_uart_remove ... Commit 6b5756f176 introduced the possibility for pdev->id being -1 but the change was not done equally in altera_uart_remove. This patch fixes this. Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>		2011-02-17 11:31:58 -08:00
..
cpm_uart
jsm
8250_accent.c
8250_acorn.c
8250_boca.c
8250_early.c
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c
8250_hp300.c
8250_hub6.c
8250_mca.c
8250_pci.c
8250_pnp.c
8250.c	serial: change the divisor latch only when prescalar actually changed	2011-02-17 11:23:50 -08:00
8250.h
21285.c
68328serial.c	68328serial: remove unsed m68k_serial->tqueue_hangup	2011-02-03 14:16:49 -08:00
68328serial.h	68328serial: remove unsed m68k_serial->tqueue_hangup	2011-02-03 14:16:49 -08:00
68360serial.c
altera_jtaguart.c
altera_uart.c	tty: serial: altera_uart: Handle pdev->id == -1 in altera_uart_remove	2011-02-17 11:31:58 -08:00
amba-pl010.c
amba-pl011.c
apbuart.c
apbuart.h
atmel_serial.c	atmel_serial: enable PPS support	2011-02-17 11:26:12 -08:00
bcm63xx_uart.c
bfin_5xx.c
bfin_sport_uart.c	tty: serial: bfin_sport_uart: fix signedness error	2011-02-03 11:40:46 -08:00
bfin_sport_uart.h
clps711x.c
crisv10.c
crisv10.h
dz.c
dz.h
icom.c
icom.h
ifx6x60.c	serial: ifx6x60: minor cleanup	2011-02-17 11:16:15 -08:00
ifx6x60.h	serial: ifx6x60: minor cleanup	2011-02-17 11:16:15 -08:00
imx.c
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig	tty: Add msm_smd_tty driver	2011-02-17 11:25:38 -08:00
kgdboc.c
m32r_sio_reg.h
m32r_sio.c
m32r_sio.h
Makefile	tty: Add msm_smd_tty driver	2011-02-17 11:25:38 -08:00
max3100.c
max3107-aava.c
max3107.c
max3107.h
mcf.c
mfd.c	serial: mfd: remove the timeout workaround for A0	2011-02-03 11:40:46 -08:00
mpc52xx_uart.c
mpsc.c
mrst_max3110.c	serial: mrst_max3110: make buffer larger	2011-02-03 14:13:17 -08:00
mrst_max3110.h
msm_serial.c
msm_serial.h
msm_smd_tty.c	tty: Add msm_smd_tty driver	2011-02-17 11:25:38 -08:00
mux.c
netx-serial.c
nwpserial.c
of_serial.c
omap-serial.c	serial: omap-serial: Enable the UART wake-up bits always	2011-02-03 14:10:22 -08:00
pch_uart.c	serial: pch_uart: support new device ML7213	2011-02-03 14:18:33 -08:00
pmac_zilog.c
pmac_zilog.h
pnx8xxx_uart.c
pxa.c
s3c24a0.c
s3c2400.c
s3c2410.c
s3c2412.c
s3c2440.c
s3c6400.c
s5pv210.c
sa1100.c
samsung.c
samsung.h
sb1250-duart.c	console: rename acquire/release_console_sem() to console_lock/unlock()	2011-01-26 10:50:06 +10:00
sc26xx.c
serial_core.c	serial-core: reset the console speed on resume	2011-02-03 14:14:00 -08:00
serial_cs.c
serial_ks8695.c
serial_lh7a40x.c
serial_txx9.c
sh-sci.c
sh-sci.h
sn_console.c
suncore.c
suncore.h
sunhv.c
sunsab.c
sunsab.h
sunsu.c
sunzilog.c
sunzilog.h
timbuart.c
timbuart.h
uartlite.c
ucc_uart.c
vr41xx_siu.c
vt8500_serial.c
zs.c
zs.h