leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e7f2f9918c
linux/arch/m68k/mac/oss.c
Adrian Bunk 8dfbdf4aba m68k/mac/: possible cleanups 
This patch contains the following possible cleanups:
- make the following needlessly global code (always) static:
  - baboon.c: struct baboon
  - baboon.c: baboon_irq()
  - config.c: mac_orig_videoaddr
  - config.c: mac_identify()
  - config.c: mac_report_hardware()
  - config.c: mac_debug_console_write()
  - config.c: mac_sccb_console_write()
  - config.c: mac_scca_console_write()
  - config.c: mac_init_scc_port()
  - oss.c: oss_irq()
  - oss.c: oss_nubus_irq()
  - psc.c: psc_debug_dump()
  - psc.c: psc_dma_die_die_die()
  - via.c: rbv_clear
- remove the unused bootparse.c
- #if 0 the following unused functions:
  - config.c: mac_debugging_short()
  - config.c: mac_debugging_long()
- remove the following unused code:
  - config.c: mac_bisize
  - config.c: mac_env
  - config.c: mac_SCC_init_done
  - config.c: mac_SCC_reset_done
  - config.c: mac_init_scca_port()
  - config.c: mac_init_sccb_port()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:24:39 -07:00

302 lines
6.7 KiB
C
Raw Blame History

/*
* OSS handling
* Written by Joshua M. Thompson (funaho@jurai.org)
*
*
* This chip is used in the IIfx in place of VIA #2. It acts like a fancy
* VIA chip with prorammable interrupt levels.
*
* 990502 (jmt) - Major rewrite for new interrupt architecture as well as some
* recent insights into OSS operational details.
* 990610 (jmt) - Now taking full advantage of the OSS. Interrupts are mapped
* to mostly match the A/UX interrupt scheme supported on the
* VIA side. Also added support for enabling the ISM irq again
* since we now have a functional IOP manager.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <asm/bootinfo.h>
#include <asm/machw.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_via.h>
#include <asm/mac_oss.h>
int oss_present;
volatile struct mac_oss *oss;
static irqreturn_t oss_irq(int, void *);
static irqreturn_t oss_nubus_irq(int, void *);
extern irqreturn_t via1_irq(int, void *);
extern irqreturn_t mac_scc_dispatch(int, void *);
/*
* Initialize the OSS
*
* The OSS "detection" code is actually in via_init() which is always called
* before us. Thus we can count on oss_present being valid on entry.
*/
void __init oss_init(void)
{
int i;
if (!oss_present) return;
oss = (struct mac_oss *) OSS_BASE;
/* Disable all interrupts. Unlike a VIA it looks like we */
/* do this by setting the source's interrupt level to zero. */
for (i = 0; i <= OSS_NUM_SOURCES; i++) {
oss->irq_level[i] = OSS_IRQLEV_DISABLED;
}
/* If we disable VIA1 here, we never really handle it... */
oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1;
}
/*
* Register the OSS and NuBus interrupt dispatchers.
*/
void __init oss_register_interrupts(void)
{
request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK,
"scsi", (void *) oss);
request_irq(OSS_IRQLEV_IOPSCC, mac_scc_dispatch, IRQ_FLG_LOCK,
"scc", mac_scc_dispatch);
request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK,
"nubus", (void *) oss);
request_irq(OSS_IRQLEV_SOUND, oss_irq, IRQ_FLG_LOCK,
"sound", (void *) oss);
request_irq(OSS_IRQLEV_VIA1, via1_irq, IRQ_FLG_LOCK,
"via1", (void *) via1);
}
/*
* Initialize OSS for Nubus access
*/
void __init oss_nubus_init(void)
{
}
/*
* Handle miscellaneous OSS interrupts. Right now that's just sound
* and SCSI; everything else is routed to its own autovector IRQ.
*/
static irqreturn_t oss_irq(int irq, void *dev_id)
{
int events;
events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI);
if (!events)
return IRQ_NONE;
#ifdef DEBUG_IRQS
if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) {
printk("oss_irq: irq %d events = 0x%04X\n", irq,
(int) oss->irq_pending);
}
#endif
/* FIXME: how do you clear a pending IRQ? */
if (events & OSS_IP_SOUND) {
oss->irq_pending &= ~OSS_IP_SOUND;
/* FIXME: call sound handler */
} else if (events & OSS_IP_SCSI) {
oss->irq_pending &= ~OSS_IP_SCSI;
m68k_handle_int(IRQ_MAC_SCSI);
} else {
/* FIXME: error check here? */
}
return IRQ_HANDLED;
}
/*
* Nubus IRQ handler, OSS style
*
* Unlike the VIA/RBV this is on its own autovector interrupt level.
*/
static irqreturn_t oss_nubus_irq(int irq, void *dev_id)
{
int events, irq_bit, i;
events = oss->irq_pending & OSS_IP_NUBUS;
if (!events)
return IRQ_NONE;
#ifdef DEBUG_NUBUS_INT
if (console_loglevel > 7) {
printk("oss_nubus_irq: events = 0x%04X\n", events);
}
#endif
/* There are only six slots on the OSS, not seven */
i = 6;
irq_bit = 0x40;
do {
--i;
irq_bit >>= 1;
if (events & irq_bit) {
oss->irq_pending &= ~irq_bit;
m68k_handle_int(NUBUS_SOURCE_BASE + i);
}
} while(events & (irq_bit - 1));
return IRQ_HANDLED;
}
/*
* Enable an OSS interrupt
*
* It looks messy but it's rather straightforward. The switch() statement
* just maps the machspec interrupt numbers to the right OSS interrupt
* source (if the OSS handles that interrupt) and then sets the interrupt
* level for that source to nonzero, thus enabling the interrupt.
*/
void oss_irq_enable(int irq) {
#ifdef DEBUG_IRQUSE
printk("oss_irq_enable(%d)\n", irq);
#endif
switch(irq) {
case IRQ_SCC:
case IRQ_SCCA:
case IRQ_SCCB:
oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_IOPSCC;
break;
case IRQ_MAC_ADB:
oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_IOPISM;
break;
case IRQ_MAC_SCSI:
oss->irq_level[OSS_SCSI] = OSS_IRQLEV_SCSI;
break;
case IRQ_NUBUS_9:
case IRQ_NUBUS_A:
case IRQ_NUBUS_B:
case IRQ_NUBUS_C:
case IRQ_NUBUS_D:
case IRQ_NUBUS_E:
irq -= NUBUS_SOURCE_BASE;
oss->irq_level[irq] = OSS_IRQLEV_NUBUS;
break;
#ifdef DEBUG_IRQUSE
default:
printk("%s unknown irq %d\n", __func__, irq);
break;
#endif
}
}
/*
* Disable an OSS interrupt
*
* Same as above except we set the source's interrupt level to zero,
* to disable the interrupt.
*/
void oss_irq_disable(int irq) {
#ifdef DEBUG_IRQUSE
printk("oss_irq_disable(%d)\n", irq);
#endif
switch(irq) {
case IRQ_SCC:
case IRQ_SCCA:
case IRQ_SCCB:
oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_DISABLED;
break;
case IRQ_MAC_ADB:
oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_DISABLED;
break;
case IRQ_MAC_SCSI:
oss->irq_level[OSS_SCSI] = OSS_IRQLEV_DISABLED;
break;
case IRQ_NUBUS_9:
case IRQ_NUBUS_A:
case IRQ_NUBUS_B:
case IRQ_NUBUS_C:
case IRQ_NUBUS_D:
case IRQ_NUBUS_E:
irq -= NUBUS_SOURCE_BASE;
oss->irq_level[irq] = OSS_IRQLEV_DISABLED;
break;
#ifdef DEBUG_IRQUSE
default:
printk("%s unknown irq %d\n", __func__, irq);
break;
#endif
}
}
/*
* Clear an OSS interrupt
*
* Not sure if this works or not but it's the only method I could
* think of based on the contents of the mac_oss structure.
*/
void oss_irq_clear(int irq) {
/* FIXME: how to do this on OSS? */
switch(irq) {
case IRQ_SCC:
case IRQ_SCCA:
case IRQ_SCCB:
oss->irq_pending &= ~OSS_IP_IOPSCC;
break;
case IRQ_MAC_ADB:
oss->irq_pending &= ~OSS_IP_IOPISM;
break;
case IRQ_MAC_SCSI:
oss->irq_pending &= ~OSS_IP_SCSI;
break;
case IRQ_NUBUS_9:
case IRQ_NUBUS_A:
case IRQ_NUBUS_B:
case IRQ_NUBUS_C:
case IRQ_NUBUS_D:
case IRQ_NUBUS_E:
irq -= NUBUS_SOURCE_BASE;
oss->irq_pending &= ~(1 << irq);
break;
}
}
/*
* Check to see if a specific OSS interrupt is pending
*/
int oss_irq_pending(int irq)
{
switch(irq) {
case IRQ_SCC:
case IRQ_SCCA:
case IRQ_SCCB:
return oss->irq_pending & OSS_IP_IOPSCC;
break;
case IRQ_MAC_ADB:
return oss->irq_pending & OSS_IP_IOPISM;
break;
case IRQ_MAC_SCSI:
return oss->irq_pending & OSS_IP_SCSI;
break;
case IRQ_NUBUS_9:
case IRQ_NUBUS_A:
case IRQ_NUBUS_B:
case IRQ_NUBUS_C:
case IRQ_NUBUS_D:
case IRQ_NUBUS_E:
irq -= NUBUS_SOURCE_BASE;
return oss->irq_pending & (1 << irq);
break;
}
return 0;
}
Reference in New Issue View Git Blame Copy Permalink