Lorenzo Bianconi e72a060151 iio: st_sensors: add register mask for status register ... Introduce register mask for data-ready status register since pressure sensors (e.g. LPS22HB) export just two channels (BIT(0) and BIT(1)) and BIT(2) is marked reserved while in st_sensors_new_samples_available() value read from status register is masked using 0x7. Moreover do not mask status register using active_scan_mask since now status value is properly masked and if the result is not zero the interrupt has to be consumed by the driver. This fix an issue on LPS25H and LPS331AP where channel definition is swapped respect to status register. Furthermore that change allows to properly support new devices (e.g LIS2DW12) that report just ZYXDA (data-ready) field in status register to figure out if the interrupt has been generated by the device. Fixes: 97865fe413 (iio: st_sensors: verify interrupt event to status) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2017-10-09 21:01:45 +01:00
..
accel	iio: st_sensors: add register mask for status register	2017-10-09 21:01:45 +01:00
adc	iio: adc: mcp320x: Add support for mcp3550/1/3	2017-10-09 21:01:36 +01:00
amplifiers	iio:amplifiers:ad8366 drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:24:50 +01:00
buffer
chemical	iio: chemical: ccs811: Add support for data ready trigger	2017-09-24 12:34:36 +01:00
common	iio: st_sensors: add register mask for status register	2017-10-09 21:01:45 +01:00
counter	iio:stm32-lp-timer and ep93xx: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-09-26 09:38:57 +02:00
dac	iio: dac: ds4422/ds4424 dac driver	2017-10-09 20:49:39 +01:00
dummy	iio: dummy: evgen: use irq_sim	2017-10-09 20:50:34 +01:00
frequency	iio:frequency: drop assign iio_info.driver_module	2017-08-22 21:28:20 +01:00
gyro	iio: st_sensors: add register mask for status register	2017-10-09 21:01:45 +01:00
health	iio:health: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:29:44 +01:00
humidity	iio:humidity: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:30:20 +01:00
imu	iio: imu: st_lsm6dsx: add FIFO ops data structure	2017-10-09 20:51:01 +01:00
light	iio: light: vl6180: Correct ALS scale for non-default gain/integration time	2017-10-09 20:50:21 +01:00
magnetometer	iio: st_sensors: add register mask for status register	2017-10-09 21:01:45 +01:00
multiplexer	iio: multiplexer: add NULL check on devm_kzalloc() and devm_kmemdup() return values	2017-09-03 18:10:29 +01:00
orientation	iio:orientation: drop assign iio_info.driver_module	2017-08-22 21:33:36 +01:00
potentiometer	iio:potentiometer:max5487: Drop explicit setting of module owner	2017-09-03 18:10:27 +01:00
potentiostat	iio:potentiostat:lmp91000 drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:34:48 +01:00
pressure	iio: st_sensors: add register mask for status register	2017-10-09 21:01:45 +01:00
proximity	iio:proximity: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 22:14:51 +01:00
temperature	iio:temperature: drop assignment of iio_info.driver_module	2017-08-22 22:14:52 +01:00
trigger	Merge 4.14-rc4 into staging-next	2017-10-09 09:02:35 +02:00
iio_core_trigger.h
iio_core.h
industrialio-buffer.c
industrialio-configfs.c
industrialio-core.c	Merge 4.14-rc4 into staging-next	2017-10-09 09:02:35 +02:00
industrialio-event.c
industrialio-sw-device.c
industrialio-sw-trigger.c
industrialio-trigger.c	iio:trigger: Remove necessity to have a trig->ops structure.	2017-08-22 21:20:28 +01:00
industrialio-triggered-event.c
inkern.c
Kconfig
Makefile