linux/arch/m68k/Makefile
Linus Torvalds 06930b94d1 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu tree from Greg Ungerer:
 "More merge and clean up of MMU and non-MMU common files, namely
  signal.c and dma.c.  There is also a simplification of the ColdFire
  GPIO setup tables.  Using a couple of simple macros we make the init
  tables really small and easy to read, and save a couple of thousand
  lines of code.  Also a move of all the ColdFire subarch support files
  into the existing coldfire directory.  The sub-directories just ended
  up duplicating Makefiles and now only contain really simple pieces of
  code.  This saves quite a few lines of code too.

  As always a couple of bugs fixes thrown in too.  Oh and a new
  defconfig for the ColdFire platforms that support having the MMU
  enabled."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (39 commits)
  m68k: add a defconfig for the M5475EVB ColdFire with MMU board
  m68knommu: unaligned.h fix for M68000 core
  m68k: merge the MMU and non-MMU versions of the arch dma code
  m68knommu: reorganize the no-MMU cache flushing to match m68k
  m68knommu: move the 54xx platform code into the common ColdFire code directory
  m68knommu: move the 532x platform code into the common ColdFire code directory
  m68knommu: move the 5407 platform code into the common ColdFire code directory
  m68knommu: move the 5307 platform code into the common ColdFire code directory
  m68knommu: move the 528x platform code into the common ColdFire code directory
  m68knommu: move the 527x platform code into the common ColdFire code directory
  m68knommu: move the 5272 platform code into the common ColdFire code directory
  m68knommu: move the 5249 platform code into the common ColdFire code directory
  m68knommu: move the 523x platform code into the common ColdFire code directory
  m68knommu: move the 520x platform code into the common ColdFire code directory
  m68knommu: move the 5206 platform code into the common ColdFire code directory
  m68knommu: simplify the ColdFire 5407 GPIO struct setup
  m68knommu: simplify the ColdFire 532x GPIO struct setup
  m68knommu: simplify the ColdFire 5307 GPIO struct setup
  m68knommu: simplify the ColdFire 528x GPIO struct setup
  m68knommu: simplify the ColdFire 527x GPIO struct setup
  ...
2012-05-21 19:15:03 -07:00

161 lines
5.2 KiB
Makefile

#
# m68k/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" and "archdep" for cleaning up and making dependencies for
# this architecture
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Hamish Macdonald
# Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com>
#
KBUILD_DEFCONFIG := multi_defconfig
ifneq ($(SUBARCH),$(ARCH))
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, \
m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
endif
endif
#
# Enable processor type. Ordering of these is important - we want to
# use the minimum processor type of the range we support. The logic
# for 680x0 will only allow use of the -m68060 or -m68040 if no other
# 680x0 type is specified - and no option is specified for 68030 or
# 68020. The other m68k/ColdFire types always specify some type of
# compiler cpu type flag.
#
ifndef CONFIG_M68040
cpuflags-$(CONFIG_M68060) := -m68060
endif
ifndef CONFIG_M68060
cpuflags-$(CONFIG_M68040) := -m68040
endif
cpuflags-$(CONFIG_M68030) :=
cpuflags-$(CONFIG_M68020) :=
cpuflags-$(CONFIG_M68360) := -m68332
cpuflags-$(CONFIG_M68000) := -m68000
cpuflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200)
cpuflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200)
cpuflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307)
cpuflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200)
cpuflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307)
cpuflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307)
cpuflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
cpuflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
cpuflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
cpuflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
cpuflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200)
cpuflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200)
cpuflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200)
KBUILD_AFLAGS += $(cpuflags-y)
KBUILD_CFLAGS += $(cpuflags-y) -pipe
ifdef CONFIG_MMU
# without -fno-strength-reduce the 53c7xx.c driver fails ;-(
KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2
else
# we can use a m68k-linux-gcc toolchain with these in place
KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
KBUILD_CFLAGS += -D__uClinux__
KBUILD_AFLAGS += -D__uClinux__
endif
LDFLAGS := -m m68kelf
KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
ifdef CONFIG_SUN3
LDFLAGS_vmlinux = -N
endif
CHECKFLAGS += -D__mc68000__
ifdef CONFIG_KGDB
# If configured for kgdb support, include debugging infos and keep the
# frame pointer
KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
endif
#
# Select the assembler head startup code. Order is important. The default
# head code is first, processor specific selections can override it after.
#
head-y := arch/m68k/kernel/head.o
head-$(CONFIG_SUN3) := arch/m68k/kernel/sun3-head.o
head-$(CONFIG_M68360) := arch/m68k/platform/68360/head.o
head-$(CONFIG_M68000) := arch/m68k/platform/68328/head.o
head-$(CONFIG_COLDFIRE) := arch/m68k/platform/coldfire/head.o
core-y += arch/m68k/kernel/ arch/m68k/mm/
libs-y += arch/m68k/lib/
core-$(CONFIG_Q40) += arch/m68k/q40/
core-$(CONFIG_AMIGA) += arch/m68k/amiga/
core-$(CONFIG_ATARI) += arch/m68k/atari/
core-$(CONFIG_MAC) += arch/m68k/mac/
core-$(CONFIG_HP300) += arch/m68k/hp300/
core-$(CONFIG_APOLLO) += arch/m68k/apollo/
core-$(CONFIG_MVME147) += arch/m68k/mvme147/
core-$(CONFIG_MVME16x) += arch/m68k/mvme16x/
core-$(CONFIG_BVME6000) += arch/m68k/bvme6000/
core-$(CONFIG_SUN3X) += arch/m68k/sun3x/ arch/m68k/sun3/
core-$(CONFIG_SUN3) += arch/m68k/sun3/ arch/m68k/sun3/prom/
core-$(CONFIG_NATFEAT) += arch/m68k/emu/
core-$(CONFIG_M68040) += arch/m68k/fpsp040/
core-$(CONFIG_M68060) += arch/m68k/ifpsp060/
core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/
core-$(CONFIG_M68360) += arch/m68k/platform/68360/
core-$(CONFIG_M68000) += arch/m68k/platform/68328/
core-$(CONFIG_M68EZ328) += arch/m68k/platform/68EZ328/
core-$(CONFIG_M68VZ328) += arch/m68k/platform/68VZ328/
core-$(CONFIG_COLDFIRE) += arch/m68k/platform/coldfire/
all: zImage
lilo: vmlinux
if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
cat vmlinux > $(INSTALL_PATH)/vmlinux
cp System.map $(INSTALL_PATH)/System.map
if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
zImage compressed: vmlinux.gz
vmlinux.gz: vmlinux
ifndef CONFIG_KGDB
cp vmlinux vmlinux.tmp
$(STRIP) vmlinux.tmp
gzip -9c vmlinux.tmp >vmlinux.gz
rm vmlinux.tmp
else
gzip -9c vmlinux >vmlinux.gz
endif
bzImage: vmlinux.bz2
vmlinux.bz2: vmlinux
ifndef CONFIG_KGDB
cp vmlinux vmlinux.tmp
$(STRIP) vmlinux.tmp
bzip2 -1c vmlinux.tmp >vmlinux.bz2
rm vmlinux.tmp
else
bzip2 -1c vmlinux >vmlinux.bz2
endif
archclean:
rm -f vmlinux.gz vmlinux.bz2
install:
sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"